Manual Haier N60

103 pages 0.3 mb
Download

Go to site of 103

Summary
  • Haier N60 - page 1

    USERS’ GUIDE Thanks for purchasing Haier mobile phones, whic h are a combination of the essence of high technologies, stylish designs and a plenty of functions. They are expected to bring endless funs to your life. Before the use of Haier mobile phones, please read this users' guide and keep it carefully for further reference. This guide ser ...

  • Haier N60 - page 2

    IMPORTA NT SAFETY PRECA UTION When using this product please follow the safety precautions below to avoid possible legal issues and damage. SAFETY IN AN AIRCRAFT Your cell phone can cause interference in an aircraft's navigation system and its network. In most countries, using this product on board an airplane is against the law. SAFETY IN VOL ...

  • Haier N60 - page 3

    Attention There are no user serviceable parts inside this product. If this product appears to be broken, call qualified service personnel and send this product to the appointed mainantenance service center. Do not attempt to disassemble or repair this product as it may result in electric shock or unrecoverable damage to the product itself. Keep thi ...

  • Haier N60 - page 4

    Fast guides for N60 Mobile phone * Enter main menu 1. In idle mode press left soft key to access main menu. 2. In the main menu, press up/ down/ left/ right of navigation key to select menu list. 3. In the main menu, press left soft key to access the selected menu. 4. In the main menu, press the right soft key to switch display mode of menus. 5. Pr ...

  • Haier N60 - page 5

    Latch B enter PDA operation mode. * Directions for use touch-pen The touch- pen of mobil e phone can he lp you operate the mobile phone better . The touch- pen is a perfume p en, before use i t inject the se lected perfum e in the special c ylinder of the touch-pen. Notice: please control the speed an d quantity during injecting. * Correct using th ...

  • Haier N60 - page 6

    Notice: If according to this step operation cannot cause the contact of pho ne to destroy and is unable t o use. T o install and take out the battery , please ac cord to correct method above. ...

  • Haier N60 - page 7

    Ⅰ introduction to your phone 1.1 Keypad Power/hang up key The red key on top right corner of the keypad is power key . Press and hold the ke y can switch on/off the mobile phone. Pressing the key can en d a c all duri ng a ca ll or reject to answer a call. Pressing the key in the profile menu can save set return to the idle mode. Call key The gre ...

  • Haier N60 - page 8

    L e f t s o f t k e y R i g h t s o f t k e y M P 3 U p k e y R i g h t k e y H O M E k e y D o w n k e y O K / M i d d l e k e y P o w e r / H a n g u p L e f t k e y C L R k e y C a l l k e y K e y p a d T ouch-pen Camera key Right side key 2 Right side key 3 MODE key MENU key ...

  • Haier N60 - page 9

    CLR key Press the key to erase/ erases all text in edit mode; press the key to return to previous menu in no-edit mode. Number key 0-9 You can press briefly the number keys 0-9 to enter the phone number option menu and show correspond number; press and hold number 1 to access the ‘voice box’ and press and hold number 2,4,5,7,8 to access speed d ...

  • Haier N60 - page 10

    Camera key This key on the right side of the phone body , press and hold the key in idle mode to activity camera/ video feature. In the ‘camera’ or ‘vid eo’ mode press the key to shoot picture. Right side key 2 On the right side of t he body is side key 2, in camera mode, when you bro w se display press the to zoom in focus; in cam era and ...

  • Haier N60 - page 11

    5. MMC/SD card: click the SD icon in quick feature columns to ente r MMC/SD card option screen to view/ uninst all it. 1.3 Using the power W arning: Y ou must put the phone at the draught of temperature +5 ℃ -+40 ℃ when charging, and must use the Haier batteries and charger provide by the provider . It will arise danger when y ou use unconfirme ...

  • Haier N60 - page 12

    3. Do not pull out t he plug of the char ger during the charging to avoid harming of the phone and charger . 4. Y ou must put the phone at the draught of temperature +5 ℃ -+40 ℃ w hen charging, and must use the charger offered by the provider . It will arise danger when you use unconfirmed charger and it will violate certification and guarantee ...

  • Haier N60 - page 13

    phone can recognize automatically . In order to prevent loss and damage information of in the card, should avoid touching the metal plane region, Avoid exposing your SIM card to electricity, magnetism. The card damaged once, the user will not be able to enter the netw ork. W arning: Turn of f the ph one when you take out the SIM card. Forbids absol ...

  • Haier N60 - page 14

    on/off the phone. If the PIN is activated, when you s w it ch on the phone, you may be prompted to enter the PIN code. a. Input the PIN code Y ou can use PIN to protect y our SIM card form unauthorized use. Once the PIN is activated, you will be r equired to enter the PIN code at the time your p hone is turned on. For the sake of confidentialit y , ...

  • Haier N60 - page 15

    indicator on the left top corner of the screen.) and you can make emer gency calls without SIM card. 1 12 is the standard GSM emergency number , which can be used by any GSM network in the w orld. ...

  • Haier N60 - page 16

    Ⅱ Call 2.1 Dial call When your service provider ’s icon display the screen, to wit enter idle mode and you can make or ans wer a call. The signal indicator in the top left corners of the screen Indicates strength of signal being rece ived. There are 4 bars is the most signal indicator. All mobile phones may be obstruction subject to interferenc ...

  • Haier N60 - page 17

    number ’+ ‘w’ (delay time)……, and then press call key (or click ‘call key’ icon by touch-pen) to dial. Method of input ‘ w’ as follow: press and hold * ke y while you input (first show ‘+’ and then show ‘w’ in ‘the number display screen’. For example: extensions fixe d phone can be got through directly , input follow n ...

  • Haier N60 - page 18

    2.1.3 dial from call list In idle mode press the call key to access ‘outgoing list’ of call list, and select a recorded number to dial it d irectly by press call key . Or select ‘call’ menu in soft key indicator to dial this recorded number . Press up navigation key to access ‘ca ll list’ option and then select a r ecorded number to dia ...

  • Haier N60 - page 19

    corresponding station of SIM card will display automatically . 2.2 Access failure When the phone cannot put throug h, for instance, the opposite party ‘line is busy , he refuse to answer the phone, he is not in the service district or the phone is switch off’, the phone will remind you that ‘the phone cannot put through’. At this very momen ...

  • Haier N60 - page 20

    left soft key (or click the answer in soft key indicator with touch-pen) to ans w er the new call, the formerly answered call will been hang up. The formerly ans wered telephone will get into the keep-t alking state. If you want to refuse a call you can press right soft key , power/hang up ke y (or click ‘refuse’ or ‘busy’ ic on by touch-pe ...

  • Haier N60 - page 21

    telephone number or the name, it will talk you according to vibration/ ring/ vibration plus ring/ mute by your set. When a new call is coming, press right soft key or power/hang up key (or click cancel or busy button by touch-pen) refuse the ne w incoming call. According to your set or the service provided by the network, the call m aybe alters to ...

  • Haier N60 - page 22

    stop working); Silent Turn of f the voice tempor arily in talking then you can hear the opposite party while he cannot hear you. Thus, it is convenient for you to talk with others in your side while talking on the phone. Change the item into cancel mute, then you can return to the normal talking Call list Enter the call list, then you can search th ...

  • Haier N60 - page 23

    When getting through the second telephone, you can choose the following fu nctions: holding, conference call (relating to SIM card), hand free, mute, telephone list. Holding Keep the pres ent call(relating to SIM card), then the bot h sides can not hear the voice of each other , then the hol ding alters to cancel holding, press it then you can keep ...

  • Haier N60 - page 24

    by the notice sound. The following operati ons can be accomplished by option i n the process of conference call; holding, seperarated, hand free, mute, telephone list, redialing. Holding Keep the pres ent call (relating to SIM card), then the bot h sides can not hear the voice of each other , then the hol ding alters to cancel holding, press it the ...

  • Haier N60 - page 25

    2.5 change the incoming tone Press right soft key in the await screen (or click the sign mode by touch pen) to change the way of incoming tone. 2.6 Emergency Call In any countr y where the digital GSM network is used, you can make emerg ency calls when your mobile phone is placed in the network coverage area ( you can get it by means of inspecting ...

  • Haier N60 - page 26

    Ⅲ Operation of menu 1. Setting menu option 1.1 Phone setting 1.1.1 Language setting There are ‘Chinese simp le’ and ‘Englis h’ options in language set menu, press OK key (or click option with touch-pen ) to select you desired language, an d then press left soft (or click ‘save’ in the soft key indicator by the touch-up) to store, the ...

  • Haier N60 - page 27

    (or click save icon in the soft key column by the touch-pen) to save your setting. When your phone is i n power on state until the set time arrive your phone w ill automaticall y power of f. 1.1.7 Input set There are Pinying, En glish, 123digits and stroke input methods in the ‘input set’ menu, and you can accord yo ur need to select. Press lef ...

  • Haier N60 - page 28

    by touch-pen) to save it. There is ring ton e notifying you w hen a call coming. 3. Vibrate Selected the vibrate option and press left soft key (or click save icon in sof t key indicator by touch-pen) to save it. When a call is coming, the mobile pho ne will vibrate. Otherwise, the phone w ill be mute. 4. Glint Selected the glint option and press l ...

  • Haier N60 - page 29

    ‘Gold T imes’, ‘Coffer Aroma’ and ‘Cyan Fruitage’ and so on. 1.3.2 W allpaper Select Select the W allpaper se lect option to press OK key (or click with touch-up) to enter ‘picture list’, and press up /down of navigation key (or with the touch-pen to roll up/down the strip) to select picture fond, when you sele cted the des ired pic ...

  • Haier N60 - page 30

    Press left soft key (click the ‘inquire status’ option with touch-pen) to select ‘inquire status’, and the screen show ‘connecting’ and then the screen w ill show ‘if operatin g successful’. 1.4.2 Call forward When activate the ‘call forward’ option you can select different type of call forward as well as y ou can set the forwar ...

  • Haier N60 - page 31

    1.4.2.5 Cancel All Call Forwards Press the left soft key [or click with the touching pen the ‘c hoice’ in the hint area] of “Cancel all the for wards”, then comes a message frame saying ‘connectin g the network’; after having connected, another hint will come out to conform. Once it is conformed, all forwards are going to be cancelled, ...

  • Haier N60 - page 32

    can enter the screen of setting a new password; then you ne e d t o t y p e i n t h e same passw ord twice to finish changing. 1.4.4 Auto Redial If this function is enabled, a hint will jump out to the screen to inquire whether to redial later when there is no reply to your outgoing call. If you choose “Redial”, it will keep on redialing for te ...

  • Haier N60 - page 33

    T o enable it, you just need t o press OK [or click with touch-pen] to conform “Time Hint” option, and then press the left soft key [or click with touch-pen] to save it. 1.4.9 Hide Code When this function is e nabled, your cell phone number will be hidden from the phone’s screen that you are calling. T o enable it, you just need to press OK [ ...

  • Haier N60 - page 34

    Company” at the present time, all incoming calls will be forwarded to the company’s phones within the “effective time”. 1.5.2.2 Set After entering “Call Forward” and choosing “T o Company”, the user can set as his wish “the company number” and “Effective T ime”. T hen press “Save” or “Cancel ” to go to the up menu. 1 ...

  • Haier N60 - page 35

    Forward to pre-set. 1.5.3.4 Cancel Enter “Call Forward” in “Call Set” and conform “ Cancel All Forwards” Note: 1. All the set num bers must be cell phone numbers or the telephone n umbers with district number ahead; otherwise the long press of the key 3,6 or 9 will fail to effect. 2. If this function lap over the Unconditional, the one ...

  • Haier N60 - page 36

    be locked. 1.6.3 Change PIN2 It’s similar to Change PIN, and please refer to Change PIN 。 1.6.4 Fire W all After the SIM is changed, all settings in Fire W all will be saved. 1.6.4.1 SMS Fire W all “S pam Activating”: all SMS from the numbers on the SMS S pam List will be directly thrown into the trash. But when the SMS S pam List is empty ...

  • Haier N60 - page 37

    1.6.4.2.3 the White List When entering the white list, the menu in the soft key area offers three options: “Phonebook”, “Manual Input” and “Delete”. The user can either choose from the phonebook or manuall y input numbers into the white list; if the user wants to delete some numbers, he just needs to press, “Delete” to remove the ch ...

  • Haier N60 - page 38

    Note in particular: 1. U-disk Cleaning Up will format (empty) “the user ’s data ”, so make copies before cleaning up(cop y all the files in the user ’ s data to a PC). Y ou are suggested to carefully use this function. 2. The format of the mobile phon e on a pc, or a long time use of the m obile phone as a memorizer , will both af fect the ...

  • Haier N60 - page 39

    your settings. Other ways such as cutting off the power , pus hing the hanging up ke y and home key w on’t save it. 1.8 Profiles Profiles are a group of definitio ns of the mobile phone’s ring-music, and it is eas y to turn on. The mobile phone of fers a set of modes, including: “normal m ode” “outdoor mode ” “meeting mode” and “s ...

  • Haier N60 - page 40

    will work together; As t he “Glint” is on, the glint lights including blue, red and purple will be shining. The default va lue of “Glint” is “on” in all four modes. Choose “music” an d then press OK [or click with touch-pen] to enter the ring music list. After choosing a song or music, press left soft key [click with the touch-pen] ...

  • Haier N60 - page 41

    “Low Battery”, then press OK [or click with touch-pen] to conform “Low Battery” and to choose whether to turn it on or of f. 11. T ouch pad T one: press up- and-down button [or click with touch-pen] to choose “T ouch pad T one”, then pres s OK [or click with touch-pen] to conform “T ouch pad T one” and to choose whether to turn it o ...

  • Haier N60 - page 42

    “Add” in the menu, then you can see several networks in the screen, from which yo u can choose some to add to your preferr ed network list. “Delete Preferred Network”: in the screen of the preferred net work, you choose “Delete” in the menu to e nter the deleting screen, then you can cho ose some to delete. (Operations above can also be ...

  • Haier N60 - page 43

    time of calls, the dates of calls and the lengths of calls, of the recent missed calls(without the call times ), outgoing calls and incoming calls. 2.1.1 Recent Calls 2.1.1.1 Missed calls In the call list, the missed call is defaulted. Entering the Missed Call, you can choose from the menu of the left soft key the functions to operate the missed ca ...

  • Haier N60 - page 44

    conform; press the button of right to move the cursor onto “Cancel” then press OK[or click “Cancel” with touch-pen ] to cancel the operation. If you want to delete a certain piece of record, you can move the cursor on this record and then ch oose “Delete” in the menu. Press OK to delete this record. 2.1.3 Call Time In the Call Record, c ...

  • Haier N60 - page 45

    Users can change their big- head photos as their wish and do not forget to conform. Users can change and update the record group according to their o wn demands. T o do that, you just need to mov e the curs or on the “Grouping Options”, the press OK [or click with touch pen] to choose the appropriate grouping, then press the left soft key [or c ...

  • Haier N60 - page 46

    looking up through initial letter . Here is an example: If the name is “ 欧阳春雪 ”, the user should input “o” to look up; and inputting o a nd y is also ok, so is inputting O,C,Y or O,Y ,C,X. IF no letter o, or only O,C, or only O,X, no result can be found. When the name is “Jack Smith”, inputting J or J and S will lead to the name ...

  • Haier N60 - page 47

    management by grouping. Manageme nt by grouping refers to set up different kinds of records and incoming call rings and “phonebook”. Another function of management by grouping is to add grou ping; the user can define 16 groups. 1. Alter grouping ring styles In altering grouping ring st yles, you first need to choose the groups you are going to ...

  • Haier N60 - page 48

    number is a mobile phone’s number , the big-head photo, name, number will appear; if the number is a SIM record number , only appear name and number . Method2: choose a record with a number , press OK [or click with touch-pen] to enter the browsing screen, then enter calling screen to call the chosen numbers. When you cho ose IP call, you cal l t ...

  • Haier N60 - page 49

    then to enter the copying screen. Note: the records in the mobile phone ca n only be copied into SI M card; records in SIMcard can only be copied into mobile phone. 2.2.1 1 Deleting Records Y ou can use the grouping deleting way to delete records. Y ou just need to choose the records, and then choose “delete” in th e menu to enter the deleting ...

  • Haier N60 - page 50

    you identify the a ccount is deleted. 2.3.3 Setting the default account Y ou can pr ess setting default key in the menu and choose an account on the account list. Then the account is set as default setting. 2.3.4 Modifying the account If you want to enter the editing mo difying window , yo u can choose an account on th e list, then press the OK (or ...

  • Haier N60 - page 51

    the list, you select the receive in the menu of the soft key . then all the e-mails of the account will be received normally . 2. there are several accounts in the list. If you select receive all , the new mails of these accounts w ill be received. 2.3.8 reading the mails 1. the mails can be read by pressing OK key at any mail box(or be touc hed t ...

  • Haier N60 - page 52

    e-mail successfully , the customers should open the GPRS of the SIM card and set the account correctly . 2. Not choosing the SSL safe identification: setting the POP3 port with 1 10, SMTP port w ith 25. then the e-mail will be sent and received in a normal way . 3. Choosing the SSL id entification: POP3 port;91 10 SMTP port:9025. the e-mail will be ...

  • Haier N60 - page 53

    “sending failed, resendi ng?”, the unsuccessful sending m essage will be saved in the inbox. If it succeed in sending a message, the phone will tell yo u that sending ; whether it is successful or not ,the collective sending will show you a result; the s ent messages will be saved in the inbox. 2.4.2 Inbox while receiving a short messag e ,the ...

  • Haier N60 - page 54

    5. “save number”: saving the phone number of the current message into the address(it is as the same as to create a new address ); 6. “move”: moving the message into the saved box; 7. “trash”: moving the mess age into the trash box. If the number is not trash through transferring the phone will tell the customers whether to set the numbe ...

  • Haier N60 - page 55

    4. “save”: saving the number in to the address (it is as the same as to create a new address); 5. “move”: moving t he message into the saved box. 2.4.5 saved box the saved box is used to save th e messages from other boxers. Edit, delete, call, save number and move can be used in the soft button alert area. 1. “edit” entering into the s ...

  • Haier N60 - page 56

    1. service center number if providing the serv ice ,the net agent provides SMS center number . 2. location you can select a location to save the message. When it is full ,the phone will change into another location. T he phone will not inform you that the inbox is full unless the two locations are full. Y ou can ch oose to use phone or the SIM firs ...

  • Haier N60 - page 57

    the channel to dec ide to receive the messages from the channel. 2.5 MMS The MMS is composed of texts, pictures and voice. Due to the MMS(multimedia messaging service), the phone can receiv e and send pictures, sound and texts. Attention: MMS service works via your network administrator or service provider . This mobile phon e supports receiving th ...

  • Haier N60 - page 58

    to send it , the phone will tell you to input the number Attention: 10 numbers are the maximum. 4. while inputting the subjects, you can directly press U or D on the ed iting screen (or use the touching pen to touch)to move the focus to select the subject. Then you can input the content and edit it. 5. yo u can insert pictures and music or edited t ...

  • Haier N60 - page 59

    inserting music, you can use the deleting music in the me nu of the soft button area. 12. if the customers want to send polypaged multimedi a messages, you can choose the insert page in the menu of the soft button alert area. Then select to insert new pages to insert a page of a new MMS, and the procedure of the operation is as the same as the form ...

  • Haier N60 - page 60

    when a MMS message is received, the mobile phone will give you a alert bell and store the message into the inbox. While in the waiting , the phone will tell you by a new frame and change the color of the icon. The number of the saving messages is dependent on the capacity of the phone. When you enter the inbox, you will find that all the received m ...

  • Haier N60 - page 61

    number and moving. Play: playing the message automatically . Edit: editing the message Delete: deleting the current message and returning the outbox autom atically . The phone will inform you whether to delete it or noe. Call: calling the numer Save: entering the address an d storing the receiver ’s number . Move: moving the message into the save ...

  • Haier N60 - page 62

    receiver or sender number . S toring p ictures: all the pictures in a MMS message will appear w hen you enter the stored pictures screen. And then you can store them in the index of the your resource. S toring mus ic: all the music in a MMS message will appear w hen you enter the stored music screen . and then you can store them in the index of you ...

  • Haier N60 - page 63

    downloading an y the ent erta inment items, according to different types. Y ou can get the exact bill from the explanation from the list of the entertainment. This service is free of charge. (the operation above can be realized by the touching pen) 2.7 browser the mobile phone h as the function of GPRS. Y ou can use the data calling to connect with ...

  • Haier N60 - page 64

    Set-setting the browser S toring the n etp age- showing the list, and adding the new one into it. Collection-showing the list ,a nd adding the new one into it. Returning-connecting wi th the main address. Dialing path-setting the configuration list and using them to connect with the net. Cutting off from the net-cutting of f (the operations above c ...

  • Haier N60 - page 65

    the net agent to get the setting information. 1) entering the window of the dialin g path by pressing the dialing path in the menu of the soft key area. 2) Selecting a setting list and entering it. 3) Inputting the content of settings 4) After finishing it ,you can press left soft key (or touch the save on th e soft key )to store settings. 5) Y ou ...

  • Haier N60 - page 66

    or L you can move the U,P ,L,R to select the icon of flying mode. Pressing ok or left soft key , or to touch the quick function icon on the top to open or close the mode. It is effective w hen it is restarted. Opening the mode will not result in initialization. The functions in relation with the net, SIM card will exert nothing. Attention: though t ...

  • Haier N60 - page 67

    6. The compensation of exposal 7. The accommodation of the screen’s brightness. 8. T he mode of night: selecting open or close. 9. The size of the photos: setting the s ize MAX 1280*1024, L 640*480, M 320*240, Min 176*144 10. The storing location: you can store the photos in the mobile phone or in the SD card. 11. UP/DOWN: you can touch the icon ...

  • Haier N60 - page 68

    tea, cold, reversal and blackwhite color . 3. the compensat ion of exposal 4. the size of the short film: L320*240, Min 176*144. 5. UP/DOW N: you can touch the icon on the righttop to realize it. Pressing the 1-9,#* can also finish it. 6. the storing loca tion: you can store the films in the phone or in the SD card. 7. the preview of the films: you ...

  • Haier N60 - page 69

    2. While playing you can use the L or R (or touch the control) to control the volume, and U to pause w hile D to continue. 3.3.4 deleting record files When you delete the files, you should delete them in the re cord profiles of the customer ’s resource; if you want to delete them in the list of the record application, you should choose the delete ...

  • Haier N60 - page 70

    from the phone, video and music will return to the phone. The line will not influence the operation of the fundam ental functions, such as sending and rece iving messages , picking up the call. The introduction of inserting the A V -lINE 1. whe n the mobile phone is not in the inserting screen, if you insert the line, the content will sill on the p ...

  • Haier N60 - page 71

    choose the ‘play’in the ‘m en u’ of the sof t key tip zone. (or click the ‘play’on the screen with the touch pen.) 3.5.3 Move audio files T o move the files in the play list, choose the ‘up’ and ‘down’ in the ‘menu’ of the soft key tip zone to move the chosen audio files up or down. 3. 5.4 Delete Audio Files T o delete the f ...

  • Haier N60 - page 72

    volume. 15. Press the key 1(on the right of the mobile) to play the previous file and press the key 2(on the left of the mobile) to pla y the next file. 3.5.6 The play formats supported by the audio player T he audio player supports the follo wing formats: mp3, amr , midi(mid), wav . The player can’t play the damaged files of the listed formats a ...

  • Haier N60 - page 73

    list. 2. ‘Reset ’ click ‘reset’ to sw itch the cursor to the first picture. 3. ‘Delete’ click ‘delete’ to delete all or part of the pictures.(or c lick the ‘delete ’ icon at the upper right scr een with the touch pen.) 4. ‘ wall pa per ’ open a picture, choose the ‘wall paper ’ in the ‘menu’ of the sof t key tip zone ...

  • Haier N60 - page 74

    power key /call off key, home key to quit the TV mode and the screen will be bright again. Meanwhile, the original functions of CLR key, pow er key/call off key, home key w ill be resumed. d. At the TV browse mode, press MP3 key to quit the TV mode and black screen state, meanwhile t he operation of MP3 will be stimulated. At the time, all y our ma ...

  • Haier N60 - page 75

    inappropriate formats viewed under the mobile browsing mode can’t be viewed on the TV . When p ictures are viewed at the TV mode, if a motion picture or a picture of an inappropriate format is switched, the TV will not reveal the picture and the T V browse mode will be quitted. g. At the TV browse mode, the mobile will be at a black screen state. ...

  • Haier N60 - page 76

    with its drawing tools and all the functions under the ‘menu’ of the soft key tip zone. 3.8.1 Drawing tools 3.8.1 T ool window a. Frame Click the frame icon with the touch pen and then you can frame t he picture at the picture-editing zone. b. Brush Click the brush icon with the touch pen and then you can draw or edit pictures. c. Eraser Click ...

  • Haier N60 - page 77

    pen and the palette will be revealed at the picture-editing zone. b. Choose the color you need and click the chosen color with the touching pen; the chosen colour will be on the p alette. c. Palette revealing The now foreground c olour will be the colour you choose an d the former foreground color will turn to the background colour . d. Switch icon ...

  • Haier N60 - page 78

    the new cat alog under the default folder . 3.9.2 Open files Certain operations will be stimulated according to the different types of the recognized files. E.g. the ‘audio player ’ will be operated when a mp3 file is opened. T ake the opening of the mp3 file under the recorder folder for example. F irst, enter ‘user ’s information’ and m ...

  • Haier N60 - page 79

    with the touching pen) to finish the renaming process. 3.9.6 MMS sending Send the present picture as a MMS attachment 3.9.7 Email sending Send the present picture as an email attachment 3.9.8 UP Switch to the upper windo w of the ‘user ’ s information’ 3.9.9 Cut, copy and pa ste Cut or copy the present file and press ‘p aste’ at under the ...

  • Haier N60 - page 80

    touching pen) and you can establish a new schedule. If there is already a record o n the chosen date, press ‘ok’(or click it with the touching pen) to enter the schedule list. Then select ‘new’of the menu at the tip zone to establish a new schedule. Under the editing window , input the content for ‘topic’, ‘beginning time’, ‘end t ...

  • Haier N60 - page 81

    tip zone to establish a new task. If there is no record in the task list, you can press the left soft key to establish a new task directly . Input the contents in ‘topi c’, ‘begin’, ‘finish’, ‘person’and ‘c ontent’, then choose ‘save’in the ‘menu’ of the soft key tip zone to save. Also, you can choose ‘send as a messag ...

  • Haier N60 - page 82

    2. Specified size The mobile phone su pports 16*16 and 24*24 font sizes, which can be s witched freely. The default size is 16*16. 3. Choose background picture Y ou can choos e the pictures under the folders of the mobiles to be the back ground picture. 4 、 Choose the background colour Y ou can choose different colours to be the background colour ...

  • Haier N60 - page 83

    4.4.4 Files management Y ou can ope n and browse other files un der other folders through ‘user ’s information’ 4.5 Alarm clock At the alarm clock windo w , there are two sorts of alarm clocks; 3 repeating clocks and two one-of f clocks. 4.5.1 Repeating alarm clocks Press up and down direction keys( or click with the touching pen) to cho ose ...

  • Haier N60 - page 84

    selection list from Monday to Sunda y, press up and down directi on key(or click with the touching pen) to choose the date for the alarm clock (single selection onl y). E.g. If you choose 14:00, open, Friday, then the alarm clock will ring at 2:00 pm on Friday. The clock set will be cleared after the ringing and will not ring again. 4.5.3 Off Alarm ...

  • Haier N60 - page 85

    touching pen to see the previous (next) word’s translation. Press CLR key (or click ‘back’ key with the touching pen) to delet e the input words or characters. 3. Press the right soft key (or click ‘quit’ with the touching pen) to quit the dictionary . 4.8 Data synchronization Through this function, the sync hronization between the data i ...

  • Haier N60 - page 86

    5.1 JA V A Y ou can download and up date the program written by j2me software from web-sites through the java function of the mobile so that the ex pension of potential functions of the mobile can b e ensured. Also, there are several default java programs for you to use. 5.1.2 Program Deletion Choose ‘deletion’ of ‘menu’ in the tip zone to ...

  • Haier N60 - page 87

    choose ‘management’ of the ‘menu’ and then choose ‘permission’ from ‘menu’ of the softkey tip zone to set permissions. 5.1.6 Download program At the JA V A w indow , you can press the right soft key( or click ‘setup’ in the soft key tip zone with the touching pen) to enter the program downloading window . Y ou can download the p ...

  • Haier N60 - page 88

    to the shady area. The rules are: you can pull a box forward a nd you can’t pull the boxes against the wall or the boxes against the other boxes. 5.3.1.2 Manipulation 1. Choose ‘new game’in the ‘menu’of the soft key tip zone to rest art the game. 2. Choose ‘back’in the ‘m enu’of the soft key tip zone to cancel the pre vious step o ...

  • Haier N60 - page 89

    4. Choose the ‘hint’ of the ‘menu’ of the soft key tip zone to reveal a n ideal place for placing a piece. This function will help the beginners a lot. 5. Choose the ‘level’ of the ‘menu’ of the soft key tip zone to set your level. Y ou can choose ‘begi nner’, ‘m edium player ’and ‘advanced player ’. 6. Press the right s ...

  • Haier N60 - page 90

    that you w ill enter the next mission. 6. Choose the ‘choose mis sion’ from the ‘menu’ of the soft key tip zone to choose the mission you like. There are 6 missions: ‘five passes’, ‘siege’, ‘brave heart’, ‘fledge’, ‘Not far ’ and ‘no escape’. 7. Choose the ‘ranking’ from the ‘menu’ of the soft key tip zone to ...

  • Haier N60 - page 91

    of the soft key tip zone to sw itch topic. 5.3.4.3 Rules for scoring. After entering the game, the score will be presented to the upper right corner . 1 score for the completion for one mission. On the upper left corner of the screen, the reference steps for p assing the pres ent mission will be presented. A completion of the mission will be 5 scor ...

  • Haier N60 - page 92

    and uncapitalized alphabets. Under the pinyin and the Englis h inputi ng mode, the number key 1 will be a bla nk key , that is, if you press number key 1, there will be a blank left on the screen. The cursor will appear by a press on #, and you can move the cursor to locate the character you want by pressing the up and down directions keys. Press O ...

  • Haier N60 - page 93

    restriction to the in put content, e.g. the phonebook, the default input mode will be 123. According to the different inputing content, the writing input modes are divided into ‘Chinese’, ‘ABC-abc’, ’12,.’, “ @# ” 、 “  ” . When you input the cont ents, if the content you want is al ready in the selection item, you can click ...

  • Haier N60 - page 94

    catalog of the mobile more ef ficiently . 1. When the mobile is used as a USB drive, the PC can oper ate the files under the‘user ’s information’and there will only an installation folder under the root catalog of the mobile. 2. If the mobile is not used as a USB drive, you can operate the ‘user’s information’on the mobile and PC can’ ...

  • Haier N60 - page 95

    Ⅴ T rouble Shooting Problem Remedy The display indicates that the phone is locked. Y ou need PIN code and PUK coke to unlock the phone. Contact your service provider . No signal Y ou lose connection with your Netwo rk Settings. Y our location may be a blind area(like in a tunnel or betwee n high-rises) or not covered by the Network Settings. Chan ...

  • Haier N60 - page 96

    before starting changing. Flashing backlight and battery icon, prolonged beep and prompt “wrong accessory” Detach the charger from the phone and replace with a genuine one. Y ou can not use the phone in a car A car may contain some metal pa rts that absorb electromagnetic wave and thu s have an adverse effect on phone performance. Purchase a ca ...

  • Haier N60 - page 97

    removed, a full charged standby battery could stand up to seven hours. Remove th e battery before your phone is turned off may lead to loss of information like Date and time too. No display of Send ID This feature is Network Settings dependent. Contact your service provider . Not allowed to use a certain function Many functions are Network Settings ...

  • Haier N60 - page 98

    SIM card uncorr ected, the SIM card may be damaged. Contact your service provider . ...

  • Haier N60 - page 99

    Ⅵ Safety and General Information Exposure to RF Energy Y our phone contains a transmitter and a receiver . When it is ON, it receives an d transmits radio frequency (RF ) energy . T he transmission power of mobile phone can be controlled with the GSM Netw ork Settings. Y our phone is design ed to comply with all standards and guidelines regarding ...

  • Haier N60 - page 100

    your ear .  Avoid contact with antenna during a call. Do not use a phone the anten na of which is damaged. T ouching a damaged antenn a may cause slight burn. Ask a qu alified technician or to replace the antenna for you. Use only genuine Haier part s. Avoid using your phon e in areas of a weak signal, such as in tunnels or bet ween high-rises. ...

  • Haier N60 - page 101

    battery short circuit.  Do not fold or disa ssemble the battery .  Do not throw the battery in fire or soak it in water . Responsibility User ’s Responsibility Neglect may cause failur e or injur y . T o avoid that, please read careful ly the following safety precautions and keep people using your phone informed of them. T o prevent any una ...

  • Haier N60 - page 102

    drive. Always obey them.  Consult the car manufacturer to ensure that electronic equipment used on you r car is adequately shiel ded from electromagnetic interference.  Y ou are rec ommended to use a hand-free car kit speciall y designed for this purpose. Al w ays give full attentio n to driving and to the road.  The use of front light a n ...

  • Haier N60 - page 103

    harmful to electronic element and battery , or cause distortion or deformation of the plastic parts.  Do not attempt to repair the phone or its accessories by yourself. Y ou can dial the hot line number of Haier when your phone cannot be operated normally .  Al w ays purchase and u se Haier batteries and chargers.  Protect the phone from d ...

Manufacturer Haier Category Cell Phone

Documents that we receive from a manufacturer of a Haier N60 can be divided into several groups. They are, among others:
- Haier technical drawings
- N60 manuals
- Haier product data sheets
- information booklets
- or energy labels Haier N60
All of them are important, but the most important information from the point of view of use of the device are in the user manual Haier N60.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Haier N60, service manual, brief instructions and user manuals Haier N60. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Haier N60.

Similar manuals

A complete manual for the device Haier N60, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Haier N60 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Haier N60.

A complete Haier manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Haier N60 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Haier N60, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Haier N60, that we can find in the current document
3. Tips how to use the basic functions of the device Haier N60 - which should help us in our first steps of using Haier N60
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Haier N60
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Haier N60 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Haier N60?

Use the form below

If you did not solve your problem by using a manual Haier N60, ask a question using the form below. If a user had a similar problem with Haier N60 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)