-
Yamaha DSP-A2 - page 1
NATURAL SOUND AV AMPLIFIER DSP-A2 CINEMA DSP 7 ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB BASS TREBLE BALANCE VCR 2 VIDEO AUX REC OUT VCR 1 TV/DBS PHONO TUNER CD DVD/LD SOURCE TAPE/MD VIDEO AUX EFFECT EXT. DECODER 55 4 3 2 l 0 l 2 3 4 LR 55 4 3 2 l 0 l 2 3 4 55 4 3 2 l 0 l 2 3 4 STANDBY/ON PHONES BASS EXTENSION TONE BYPASS ...
-
Yamaha DSP-A2 - page 2
Congratulations! Y ou are the proud owner of a Y amaha Digital Sound Field Processing (DSP) System—an extremely sophisticated audio component. The DSP system takes full advantage of Y amaha’ s undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instructions in this m ...
-
Yamaha DSP-A2 - page 3
1 English CAUTION .................................................................. 2 INTRODUCTION ....................................................... 3 Features .................................................................... 3 What’s DSP? ............................................................. 4 GETTING STARTED .................. ...
-
Yamaha DSP-A2 - page 4
2 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, d ...
-
Yamaha DSP-A2 - page 5
3 English 7 Channel P ower Amplification Main: 100W + 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Center: 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Rear: 100W + 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Front eff ect: 25W + 25W (8 Ω ) RMS Output P owe r , 0.05% THD , 1 kHz Multi-Mode Digital ...
-
Yamaha DSP-A2 - page 6
4 Welcome to the exciting world of digital home entertainment. This unit is one of the most complete and advanced AV amplifier available. Some of the more advanced features may not be familiar to you, but they are easy to use. State-of-the-art technologies such as Dolby Digital and Digital Theater Systems (DTS) may be new to your home, but you have ...
-
Yamaha DSP-A2 - page 7
5 English Dolby Digital is the next level of Dolby Surround sound system developed for 35 mm film-movies by employing low bit-rate audio coding. Dolby Digital is a digital surround sound system that provides completely independent multi-channel audio to you. Dolby Digital provides five full range channels in what is sometimes referred to as a “3/ ...
-
Yamaha DSP-A2 - page 8
6 Dolby Pr o Logic + 2 Digital Sound Fields Digital sound fields are created on the presence side and the rear surround side of the Dolby Pro Logic Surround- decoded sound field respectively. They create a wide acoustic environment and emphasize surround-effect in the room, letting you feel much presence as if you were watching a movie in a popular ...
-
Yamaha DSP-A2 - page 9
7 English GETTING ST AR TED Getting star ted Remote controller User function stickers Batteries (size AA, LR6, UM-3) Unpac king Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories. Close the front cover whenever the controls inside the panel are not used. To open the front cover Ope ...
-
Yamaha DSP-A2 - page 10
8 Installing batteries in the remote contr oller Since the remote controller will be used for many of this unit’s control operations, you should begin by installing the supplied batteries. 1. Turn the remote controller over and slide the battery compartment cover in the direction of the arrow. 2. Insert the batteries (AA, LR6, UM-3 type) accordin ...
-
Yamaha DSP-A2 - page 11
9 English Contr ols and their functions Fr ont panel NATURAL SOUND A V AMPLIFIER DSP A2 CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VCR 2 VIDEO AUX REC OUT VCR 1 TV/DBS PHONO TUNER CD DVD/LD SOURCE TAPE/MD VIDEO AUX NEXT EFFECT PROGRAM A SPEAKERS B SET MENU EX ...
-
Yamaha DSP-A2 - page 12
10 7 SPEAKERS switches Press the switch A or B (or both) for the main speakers you will use to select them. Press the switch for the main speakers you will not use again to cancel them. On the display panel, “SPEAKERS A” and/or “SPEAKERS B” will be illuminated, depending on which main speakers are being selected. 8 PHONES jack Headphones ca ...
-
Yamaha DSP-A2 - page 13
11 English Displa y panel DIGITAL PRO LOGIC DSP SPEAKERS AB TAPE/MD CD TUNER PHONO DVD/LD TV/DBS VCR 1 VCR 2 V-AUX SLEEP 2 3 1 5 46 7 1 indicators Either of the “dts” indicators will be illuminated when the built-in DTS decoder is turned on. A red “dts” indicator will be illuminated when playing a compact disc or laserdisc encoded with DTS. ...
-
Yamaha DSP-A2 - page 14
12 This unit has been designed to provide the best sound field quality with a full seven-speaker system setup, using a pair of main speakers to output main source sounds, two extra pairs of effect speakers to generate the sound field plus one center speaker for dialog. We therefore recommend that you use a seven-speaker setup. A four-speaker system ...
-
Yamaha DSP-A2 - page 15
13 English 4 Speaker System Basic system. You can enjoy widely diffused sound by only adding a pair of rear speakers to a basic stereo speaker system. 1E. SYS. SETUP—Set to 5ch. (See page 27.) 1A. CENTER SP—Set to NONE. (See page 26.) 6 Speaker System Good for sound fields from 2-channel stereo sources. When a normal stereo source is played bac ...
-
Yamaha DSP-A2 - page 16
14 Caution: Plug in this unit and other components after all connections are completed. All connections must be correct, that is to say L (left) to L , R (right) to R , “ + ” to “ + ” and “ – ” to “ – ”. Also refer to the owner’s manual for each of your components. A udio/video source equipment ● Use RCA type pin plug cables ...
-
Yamaha DSP-A2 - page 17
15 English VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN TUNER VCR 2 OUT VIDEO S VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN VCR 2 OUT MONITOR OUT S VIDEO AUDIO SIGNAL EXTERNAL DECODER INPUT 2 MAIN SUB WOOFER CENTER SURROUND TV/DBS CD CD DVD/LD TAPE/MD IN (PLAY) OUT (REC) DVD/LD COAXIAL OPTICAL DIGITAL RF SIGNAL DIGITAL SIGNAL GND PHONO 1 CD TAPE/MD 3 4 IN ( PLAY ) ...
-
Yamaha DSP-A2 - page 18
16 (Europe model) No connection TV monitor Scart-plug connector cable MAIN PRE OUT MAIN IN COUPLER IN TUNER VCR 2 OUT VIDEO S VIDEO IN VCR 2 OUT MONITOR OUT EXTERNAL DECODER INPUT 2 MAIN SUB WOOFER CENTER SURROUND TV/DBS TAPE/MD IN (PLAY) OUT (REC) DVD/LD DIGITAL SIGNAL VIDEO AUDIO L AUDIO R For connecting with a TV monitor that uses a 21 pin conne ...
-
Yamaha DSP-A2 - page 19
17 English PREPARATION Notes ● When you connect an audio/video unit to both of the digital and analog terminals of this unit, make sure to connect to both terminals of the same name. ● Be sure to attach the covers when the OPTICAL terminals are not being used, in order to protect the terminals from dust. ● In order to make this unit perform s ...
-
Yamaha DSP-A2 - page 20
18 DVD/LD TV/DBS IN VCR 1 OUT IN TUNER VCR 2 OUT AUDIO SIGNAL EXTERNAL DECODER INPUT 2 MAIN SUB WOOFER CENTER SURROUND TV/DBS CD CD DVD/LD TAPE/MD IN (PLAY) OUT (REC) DVD/LD COAXIAL OPTICAL DIGITAL RF SIGNAL DIGITAL SIGNAL GND PHONO 1 CD TAPE/MD 3 4 IN ( PLAY ) OUT ( REC ) AUDIO SIGNAL DIGIT AL OUT ANALOG OUT DOLBY DIGIT AL RF OUT (Europe model) PR ...
-
Yamaha DSP-A2 - page 21
19 English VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN TUNER VCR 2 OUT VIDEO S VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN VCR 2 OUT MONITOR OUT S VIDEO AUDIO SIGNAL VIDEO SIGNAL 2 VIDEO IN S-VIDEO OUT VIDEO OUT VIDEO OUT S-VIDEO IN S-VIDEO OUT VIDEO IN S-VIDEO IN VIDEO OUT S-VIDEO OUT S-VIDEO OUT VIDEO OUT VIDEO IN S-VIDEO IN m Connecting to S VIDEO terminals If ...
-
Yamaha DSP-A2 - page 22
20 This unit is equipped with additional 6-channel audio signal input terminals (for left main, right main, center, left rear surround, right rear surround and subwoofer channels) for inputting signals from an external decoder of a future format to this unit. To listen to a sound by reproducing signals input to these terminals, press the EXT. DECOD ...
-
Yamaha DSP-A2 - page 23
21 English Speakers SEE INSTRUCTION MANUAL FOR CORRECT SETTING. CENTER FRONT CAUTION MAIN CENTER FRONT REAR ( SURROUND ) PRE OUT MAIN IN SPEAKERS COUPLER OUTPUT A B A B REAR MAIN IMPEDANCE SELECTOR CENTER : 4 Ω MIN. / SPEAKER FRONT :6 Ω MIN. / SPEAKER REAR :6 Ω MIN. / SPEAKER MAIN A OR B :4 Ω MIN. / SPEAKER A B :8 Ω MIN. / SPEAKER CENTER ...
-
Yamaha DSP-A2 - page 24
22 WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power to this unit is on, otherwise this unit may be damaged. IF THIS UNIT FAILS TO TURN ON WHEN THE STANDBY/ON SWITCH IS PRESSED: The IMPEDANCE SELECTOR switch may not be set to either end. If so, set the switch to either end when this unit is in the standby mode. Select the ...
-
Yamaha DSP-A2 - page 25
23 English The speaker connections described on page 21 are fine for most applications. If for some reason, however, you wish to drive main, center, front effect and/or rear speakers with your existing amplifier, etc., the following terminals are available for connecting external amplifier(s) to this unit. 1 MAIN PRE OUT/MAIN IN terminals The PRE O ...
-
Yamaha DSP-A2 - page 26
24 • After completing all connections, plug the AC power cord into an AC outlet. • Unplug the AC power cord from the AC outlet if this unit is not to be used for a long period of time. VOLTAGE SELECTOR TION MANUAL FOR CORRECT SETTING. A B REAR MAIN SWITCHED AC OUTLETS I00W MAX. TOTAL CENTER : 4 Ω MIN. / SPEAKER FRONT :6 Ω MIN. / SPEAKER REA ...
-
Yamaha DSP-A2 - page 27
25 English PREPARATION If you connect your VCR, LD player, video monitor, etc. to this unit, you can take advantage of this unit’s capability to display program titles, parameter data and information for various setting changes and adjustments on your video monitor screen. This information will be superimposed over the video image. If there is no ...
-
Yamaha DSP-A2 - page 28
26 1A. CENTER SP Choices: LARGE (LRG)/SMALL (SML)/NONE Preset position: LRG LRG : When your center speaker is approximately the same size as the main speakers. SML : When you use a center speaker that is smaller than the main speakers. In this position, low bass signals (below 90 Hz) at the center channel are output from the SUBWOOFER terminals (or ...
-
Yamaha DSP-A2 - page 29
27 English 1C. MAIN SP Choices: LARGE/SMALL Preset position: LARGE LARGE : If your main speakers have a high ability for bass reproduction. In this position, full range signals present at the main channels are output from the main speakers. SMALL : If your main speakers do not have a high ability for bass reproduction. However, if your system does ...
-
Yamaha DSP-A2 - page 30
28 m Changing selections Refer to the display panel or the monitor screen when changing the selections. When using the remote controller, set the PARAMETER /SET MENU switch to the SET MENU position. Note : The cover of the remote controller must be open. 1 Turn on the power of this unit. (If necessary, turn on the power of the monitor to display in ...
-
Yamaha DSP-A2 - page 31
29 English 1 Set to the “ ∞ ” position. 2 Turn on the power. 3 Select main speakers A or B. The corresponding indicator will be illuminated. * Both speakers A and B can be selected. 4 Set to the “0” position. 5 Set to the “OFF ( )”. 6 Set the PARAMETER/SET MENU switch on the remote controller to the PARAMETER position. 7 Press the TES ...
-
Yamaha DSP-A2 - page 32
30 8 Turn up the volume. You will hear a test tone (like pink noise) from the left main speaker, then the center speaker, then the right main speaker, then the right rear speaker, and then the left rear speaker, for about 2.5 seconds each. The display changes as shown below. * The state of the test tone output is also shown on the monitor screen by ...
-
Yamaha DSP-A2 - page 33
31 English 11 For the front effect speaker level adjustment, press the TEST key on the remote controller again so that “TEST DSP” appears on the display. A calibration signal should be heard from the main speakers and the front effect speakers in turn. 12 Adjust the front effect speaker level by pressing the + or – key so that it becomes almo ...
-
Yamaha DSP-A2 - page 34
32 1 Set to the “ ∞ ” position. 2 Turn on the power. 3 Select main speakers A or B. The corresponding indicator will be illuminated. Front panel * Both speakers A and B can be selected. 4 Select an input source. (For video sources, turn on the TV/monitor.) The selected source is shown on the display panel and the monitor screen. Name of the s ...
-
Yamaha DSP-A2 - page 35
33 English BASIC OPERATION NATURAL SOUND A V AMPLIFIER DSP A2 CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VCR 2 VIDEO AUX REC OUT VCR 1 TV/DBS PHONO TUNER CD DVD/LD SOURCE TAPE/MD VIDEO AUX NEXT EFFECT PROGRAM A SPEAKERS B SET MENU EXT. DECODER STANDBY/ON 55 4 ...
-
Yamaha DSP-A2 - page 36
34 When y ou finish using this unit Press the STANDBY/ON switch on the front panel or the STANDBY key on the remote controller to enter the standby mode. T o select the source connected to this unit’ s EXTERNAL DECODER INPUT terminals as the input source. Press the EXT. DECODER button. “EXT. DECODER IN” will appear on the display. Note The in ...
-
Yamaha DSP-A2 - page 37
35 English v For CD, TAPE/MD and TV/DBS sources: The following three input modes are provided. AUTO: This mode is automatically selected when you turn on the power of this unit. In this mode, input signal is automatically selected by the following order of priority. 1. Digital signal encoded with Dolby Digital or DTS, or normal digital input signal ...
-
Yamaha DSP-A2 - page 38
36 Notes on input mode selection ● The input mode for a TV/DBS source is selected with function “7. TV/DBS INPUT” in the SET MENU mode. This unit will be automatically set to the selected input mode when the power is turned on. ● Set the input mode to the AUTO or D.D.RF mode to play a DVD/LD source encoded with Dolby Digital. ● Select the ...
-
Yamaha DSP-A2 - page 39
37 English 1 Set the REC OUT selector to the SOURCE position. 2 Select the source you want to record. 3 Play the source and then turn the VOLUME control up to confirm the input source. 4 Begin recording to the tape deck (or MD recorder etc.) or VCR connected to this unit. 3 NATURAL SOUND A V AMPLIFIER DSP A2 CINEMA DSP 7ch VOLUME INPUT SELECTOR INP ...
-
Yamaha DSP-A2 - page 40
38 m Recor ding a source to tape (or MD) while listening to (or watc hing) another sour ce The source (except for “SOURCE”) that is selected with the REC OUT selector can be recorded to a tape deck (MD recorder) and/or VCR, regardless of the INPUT SELECTOR setting. 1 Select the source you want to record. 2 Play the source. 3 Select the source w ...
-
Yamaha DSP-A2 - page 41
39 English Notes on recording ● The VOLUME, BASS, TREBLE, BALANCE controls, the BASS EXTENSION button and the settings of DSP have no effect on the material being recorded. ● Composite video and S video signals pass independently through this unit’s video circuits. Therefore, when recording or dubbing video signals, if your video source unit ...
-
Yamaha DSP-A2 - page 42
40 Using digital sound field pr ocessor (DSP) Pla ying a source with an eff ect of the digital sound field pr ocessor (DSP) B DVD/LD EXT. DEC. PHONO EFFECT ON/OFF TV/DBS V-AUX VCR 2 C DISC STOP PRESET A/B/C/D/E CHURCH 123 CLUB ENTER- TAINMENT JAZZ STADIUM THEATER 1 MOVIE THEATER 2 MOVIE VIDEO CONCERT THEATER TV CONCERT ROCK 456 HALL 1 HALL 2 789 PA ...
-
Yamaha DSP-A2 - page 43
41 English 3 Select a program that is suitable for the source. The name of the selected program lights up on the display panel and the monitor screen. 4 ● A djust the output level of each speaker. (For details, refer to the corresponding descriptions on pages 43 and 44.) ● You can create your own sound field taste. (For details, refer to pages ...
-
Yamaha DSP-A2 - page 44
42 m T o enjoy a video sour ce encoded with Dolb y Pro Logic Surr ound, Dolb y Digital or DTS When you select the program No. 10, 11 or 12, and the input signal of the source is 2-channel stereo, Dolby Pro Logic Surround is decoded. When some program is selected and the input signal of the source is encoded with Dolby Digital, Dolby Digital is auto ...
-
Yamaha DSP-A2 - page 45
43 English Adjusting output level of the center , right rear , left rear , front effect speaker s and subw oofer You can adjust the sound output level of the each speaker even if the output level is already set in “Speaker balance adjustment” on pages 29 to 31. 1 Set the PARAMETER/SET MENU switch on the remote controller to the PARAMETER positi ...
-
Yamaha DSP-A2 - page 46
44 Notes ● Once the output level is adjusted, the level value will be the same in all the digital sound field programs. ● The value of each speaker output level you set the last time will remain memorized even when this unit is in the standby mode. However, if the power cord is disconnected for more than one week, these values will be automatic ...
-
Yamaha DSP-A2 - page 47
45 English The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. The data for these sound fields were recorded at actual locations using sophisticated sound field measurement equipment. Note The chann ...
-
Yamaha DSP-A2 - page 48
46 FEATURE This is the sound field at stage front in “The Bottom Line”, a famous New York Jazz club. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. A jazz club in New York. It is in a basement and has a relatively spacious floor area. The reflection pattern is similar to that of a small hal ...
-
Yamaha DSP-A2 - page 49
47 English FEATURE Provides excellent depth of vocals and overall clarity, restraining excessive reverberation. For opera, the orchestra pit and the stage are ideally combined, letting you feel a full presence sound. The rear surround side of the sound field is relatively moderated, however, it reproduces beautiful sound by the use of the data of a ...
-
Yamaha DSP-A2 - page 50
48 FEATURE Creates the extremely wide sound field of a movie theater. It precisely reproduces the source sound in detail, giving both the video and the sound field incredible reality. Any kind of video sources encoded with Dolby Surround or DTS (especially large-scale movie productions) are ideal for use with this program. Clearly reproduces dialog ...
-
Yamaha DSP-A2 - page 51
49 English FEATURE The built-in Dolby Pro Logic Surround decoder, the Dolby Digital decoder or the DTS decoder precisely reproduces sounds and sound effects of a source encoded with Dolby Surround or DTS. The realization of a highly efficient decoding process improves crosstalk and channel separation and makes sound positioning smoother and more pr ...
-
Yamaha DSP-A2 - page 52
50 AD V ANCED FEA TURES Refer to the information in the display panel or monitor screen during operation. The monitor power must be turned on to display information on the monitor. When using the remote controller, set the PARAMETER /SET MENU switch to the SET MENU position. Note : The cover of the remote controller must be open. 1 To make changes, ...
-
Yamaha DSP-A2 - page 53
51 English 1. SPEAKER SET (Selecting the output modes suitable for y our speaker system) Refer to pages 26 to 27 for details. (Once you have selected proper modes, you do not have to make a setting change, unless your speaker system is modified.) m Function description 2. DLBY DGTL (DOLBY DIGIT AL) SET Adjusting method After selecting the title “ ...
-
Yamaha DSP-A2 - page 54
52 ADVANCED FEATURES 4. CENTER DELA Y [Adjusting the dela y of center sounds (dialog etc.)] ● Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms ● This adjustment is effective only when Dolby Digital or DTS is decoded and the signals of the selected source encoded with Dolby Digital or DTS contain center channel signals. Adjusts the ...
-
Yamaha DSP-A2 - page 55
53 English 7. TV/DBS INPUT (Selecting the initial input mode of the source connected to the TV/DBS input terminals) For the source connected to the TV/DBS input terminals of this unit, you can designate the input mode that is automatically selected when the power of this unit is switched on. AUTO: In this position, the AUTO input mode is always sel ...
-
Yamaha DSP-A2 - page 56
54 What is a sound field? In order to explain the impressive functions of the DSP, we need to first understand what a sound field really is. What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In addition to making the sound “live”, these reflections enable us to tell where the ...
-
Yamaha DSP-A2 - page 57
55 English m Selecting and editing pr ogram parameters This adjustment can be made only by using the remote controller and watching the monitor screen or the display panel. Note Information on the monitor screen would be easier to see than the display panel. 1 Set the PARAMETER/SET MENU switch to the PARAMETER position. Note: The cover of the remot ...
-
Yamaha DSP-A2 - page 58
56 m Descriptions of the digital sound field parameters Not all of the following parameters are found in every program. ● ROOM SIZE How it Affects the Sound: Changes the apparent size of the music venue. The larger the value, the larger the simulated room will sound. What it Does: Adjusts the timing between the early reflections. Early reflection ...
-
Yamaha DSP-A2 - page 59
57 English ● LIVENESS How it Affects the Sound: This parameter changes the apparent reflectivity of the walls in the hall. The early reflections from a sound source will lose intensity (decay) much faster in a room with acoustically absorbent wall surfaces than in one which has mostly reflective surfaces. A room with highly reflective surfaces in ...
-
Yamaha DSP-A2 - page 60
58 ● REV . LEVEL (Reverberation Level) This parameter adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes. Control Range: 0 – 100% ● S. DELA Y (Surround Dela y) Adjusts the delay between the direct sound and the first reflection on the rear surround side sound field. The larger the value ...
-
Yamaha DSP-A2 - page 61
59 English 1 Select the source using the INPUT SELECTOR and start playback (or select a broadcast station) on the source unit. 2 Press the SLEEP key repeatedly until the desired SLEEP time appears on the display. * “SLEEP time” is the time that elapses before this unit is automatically turned into the standby mode. Each time you press the SLEEP ...
-
Yamaha DSP-A2 - page 62
60 The remote controller is designed to control the most commonly used functions. If the CD player, tape deck, LD player, etc. is a YAMAHA component with remote control compatibility, this remote controller will also control various functions. * For basic operations, the cover must be opened. m K ey name and function MACRO QUICK OFF SLOW A/B REC/PA ...
-
Yamaha DSP-A2 - page 63
61 English REMOTE CONTROLLER 1 TAPE/MD keys These keys control tape decks or MD recorders. The A/B/C switch ( I ) should be set to the “A” position to control tape decks, and “C” position for MD recorders. * The DIR A, B and A/B keys apply only to double cassette tape decks. * Pressing the DIR A key will reverse the tape direction on a sing ...
-
Yamaha DSP-A2 - page 64
62 REMOTE CONTROLLER This is a learning remote controller. The shaded keys in the illustration shown below can be programmed to “learn” control functions from other remote controllers. This unit can be used in place of other remote controllers by learning their functions. It will be much convenient for you to operate various audio and video com ...
-
Yamaha DSP-A2 - page 65
63 English Notes • Area A cannot learn a new function. To store a new function, store it onto area B or C. • If a key which has a preset function learns a new function, the preset function will not work but is not deleted. When the learned function is cleared, the preset function is restored. (For information on clearing a learned function, ref ...
-
Yamaha DSP-A2 - page 66
64 REMOTE CONTROLLER When the cover of the remote controller is closed, you can easily operate Yamaha components including learned functions by using the OPERATION CONTROL keys. REMOTE CONTROL TRANSMITTER TAPE/MD CD TUNER VCR 1 VCR 2 DVD/LD V-AUX EXT. DEC. PHONO TV/DBS TV VCR MUTE MASTER VOLUME OPERATION CONTROL EFFECT TRANSMIT A/B REC/PAUSE B A A ...
-
Yamaha DSP-A2 - page 67
65 English REMOTE CONTROLLER Notes • If an OPERATION CONTROL key is substituted for a key which has no function (empty), then a command will not be carried out. Depending on your plan, store functions from other remote controllers into an empty area of those keys. (Refer to page 68 for the learning method.) • While playing an audio/video unit, ...
-
Yamaha DSP-A2 - page 68
66 REMOTE CONTROLLER Macr o operations (Co ver is c losed) REMOTE CONTROL TRANSMITTER TAPE/MD CD TUNER VCR 1 VCR 2 DVD/LD PHONO V-AUX EXT. DEC. TV/DBS TV VCR MUTE MASTER VOLUME OPERATION CONTROL EFFECT TRANSMIT MACRO QUICK OFF SLOW LIGHT A/B REC/PAUSE B A A B EFFECT ON/OFF C DIR DISC STOP TRANSMIT /LEARN LEARN CLEAR MACRO PRESET A/B/C/D/E CHURCH 12 ...
-
Yamaha DSP-A2 - page 69
67 English REMOTE CONTROLLER Macro key 1st (Turns on this unit.) 2nd (Selects an input source.) 3rd (Starts playback of a source.) “” on area A of keys 1 “” on area A of keys 2 – “” on area B of keys 1 “” on area B of keys 2 – “” on area C of keys 1 “” on area C of keys 2 – – – Function of the key (and area) carrie ...
-
Yamaha DSP-A2 - page 70
68 REMOTE CONTROLLER m Learning a new function 1 Place this remote controller and the other remote controller so that they face each other. 2 * If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. Repeat this step. 3 If necessary, select the m ...
-
Yamaha DSP-A2 - page 71
m Making a new macr o A new macro can be programmed onto any preset macro key in place of the factory preset functions. (See page 66 to know what keys are preset macro keys.) You can make as many as 13 new macro keys. A macro key can learn as many as seven functions of other keys. Note If you store a continuous function such as lowering the volume ...
-
Yamaha DSP-A2 - page 72
70 REMOTE CONTROLLER 1 To clear a learned key function, press the LEARN button using a ball-point pen or similar object. To clear a macro you made, press the MACRO button. 2 Press and hold the CLEAR button using a ball-point pen or similar object. 3 Holding the CLEAR button pressed, press and hold the key whose function you want to clear until the ...
-
Yamaha DSP-A2 - page 73
71 English Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Problem The unit fails to turn on when the STANDBY/ON switch is pressed, or turns int ...
-
Yamaha DSP-A2 - page 74
72 TROUBLESHOOTING Problem The remote controller does not work. The remote controller does not function properly. Learning cannot be made successfully. (The TRANSMIT/LEARN indicator does not light up or flash.) Continuous functions such as volume are learned, but operate only for a moment before stopping. Cause The batteries of this remote controll ...
-
Yamaha DSP-A2 - page 75
73 English TROUBLESHOOTING Problem A loud hissing noise is heard when you play back a source encoded with DTS. A percussive noise is heard when you begin playing back a source encoded with DTS. No sound is heard when you play back a source encoded with DTS, even though the “AUTO” or “DTS” input mode is selected on this unit. No sound is hea ...
-
Yamaha DSP-A2 - page 76
74 A UDIO SECTION Minimum RMS Output Power Per Channel (When both channels are driven) MAIN L/R (20 Hz to 20 kHz, 0.02% THD, 8 ohms) ......................................................................... 100W+100W CENTER (20 Hz to 20 kHz, 0.02% THD, 8 ohms) .................................................................................... 100W ...
-
Yamaha DSP-A2 - page 77
75 English SPECIFICATIONS VIDEO SECTION Video Signal Type [Europe and U.K. models] ................................................ PAL [China and General models] ................................. NTSC/PAL Video Signal Level .......................................... 1 Vp-p/75 ohms S-Video Signal Level Y ............................................ ...
-
Yamaha DSP-A2 - page 78
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 7731 ...
Do you have a question concerning Yamaha DSP-A2?
Use the form below
If you did not solve your problem by using a manual Yamaha DSP-A2, ask a question using the form below. If a user had a similar problem with Yamaha DSP-A2 it is likely that he will want to share the way to solve it.