-
Panasonic PT-L300U - page 1
LCD Pr ojector Operating Instructions Model No. PT -L300U PT -L200U R P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY VOLUME PICTURE MODE SD MUTE SD TIME MENU LCD PROJECTOR V I D E O C M P N T COMPONENT KEYSTONE TQBJ 0120-1 Before operating this product, please read the instructions carefully and save this manual for future use. ...
-
Panasonic PT-L300U - page 2
2 3 Preparation CAUTION: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding p ...
-
Panasonic PT-L300U - page 3
2 3 Preparation CAUTION: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding p ...
-
Panasonic PT-L300U - page 4
5 Preparation Precautions with regar d to saf ety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result ...
-
Panasonic PT-L300U - page 5
5 Preparation Precautions with regar d to saf ety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result ...
-
Panasonic PT-L300U - page 6
7 Preparation 6 B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result. Replacement of the lamp unit should only be carried out by a qualified technician. B The lamp unit has high internal pressure. It can easily become damaged ...
-
Panasonic PT-L300U - page 7
7 Preparation 6 B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result. Replacement of the lamp unit should only be carried out by a qualified technician. B The lamp unit has high internal pressure. It can easily become damaged ...
-
Panasonic PT-L300U - page 8
9 Preparation 8 Use only the specified battery. B If an incorrect battery is used, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not mix old and new batteries. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the bat ...
-
Panasonic PT-L300U - page 9
9 Preparation 8 Use only the specified battery. B If an incorrect battery is used, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Do not mix old and new batteries. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the bat ...
-
Panasonic PT-L300U - page 10
11 Preparation 10 About the SD memory card slot Make sure that there are no foreign objects inside the slot when inserting an optional SD memory card. Failure to observe it may damage the card and the slot. About the screen If the screen you are using is dirty, damaged or discolored, attractive projections cannot be obtained. Do not apply any volat ...
-
Panasonic PT-L300U - page 11
11 Preparation 10 About the SD memory card slot Make sure that there are no foreign objects inside the slot when inserting an optional SD memory card. Failure to observe it may damage the card and the slot. About the screen If the screen you are using is dirty, damaged or discolored, attractive projections cannot be obtained. Do not apply any volat ...
-
Panasonic PT-L300U - page 12
13 Preparation 12 # Air outlet port Do not cover this port. W ARNING Do not bring your hands or other objects close to the air outlet port. B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result. $ Connector panel (page 16) % P ...
-
Panasonic PT-L300U - page 13
13 Preparation 12 # Air outlet port Do not cover this port. W ARNING Do not bring your hands or other objects close to the air outlet port. B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result. $ Connector panel (page 16) % P ...
-
Panasonic PT-L300U - page 14
15 Preparation 14 + KEYSTONE buttons (pages 28 and 29) This button is used to correct keystone distortion of the projected image when the projector position is tilted upward or downward. , NORMAL button (page 27) This button is used to reset the projector adjustment values to the factory default settings. - ASPECT button (page 30) This button is us ...
-
Panasonic PT-L300U - page 15
15 Preparation 14 + KEYSTONE buttons (pages 28 and 29) This button is used to correct keystone distortion of the projected image when the projector position is tilted upward or downward. , NORMAL button (page 27) This button is used to reset the projector adjustment values to the factory default settings. - ASPECT button (page 30) This button is us ...
-
Panasonic PT-L300U - page 16
17 Preparation 16 <Connector panel> <PT-L300U> <PT-L200U> # $ %& ' ( $% ' # ( # AUDIO L-R input jacks (page 18) $ VIDEO input jack (page 18) This jack is used to input video signals from a video equipment such as a video deck. % S2 VIDEO input connector (page 18 and 30) This connector is used to input signals from an ...
-
Panasonic PT-L300U - page 17
17 Preparation 16 <Connector panel> <PT-L300U> <PT-L200U> # $ %& ' ( $% ' # ( # AUDIO L-R input jacks (page 18) $ VIDEO input jack (page 18) This jack is used to input video signals from a video equipment such as a video deck. % S2 VIDEO input connector (page 18 and 30) This connector is used to input signals from an ...
-
Panasonic PT-L300U - page 18
18 19 Preparation Example of connecting to video equipment DVD player Video deck NOTE: B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs. Connections Notes on connections B Read the instruction manual for each system comp ...
-
Panasonic PT-L300U - page 19
18 19 Preparation Example of connecting to video equipment DVD player Video deck NOTE: B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs. Connections Notes on connections B Read the instruction manual for each system comp ...
-
Panasonic PT-L300U - page 20
20 21 Preparation Setting-up Pr ojection methods The projector can be set up so that any one of the following four projection methods can be used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 40 for details.) FRONT/REAR FRONT REAR (Factory default setting) NO ...
-
Panasonic PT-L300U - page 21
20 21 Preparation Setting-up Pr ojection methods The projector can be set up so that any one of the following four projection methods can be used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 40 for details.) FRONT/REAR FRONT REAR (Factory default setting) NO ...
-
Panasonic PT-L300U - page 22
22 23 P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY VOLUME PICTURE MODE SD MUTE SD TIME MENU V I D E O C M P N T COMPONENT KEYSTONE P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY VOLUME PICTURE MODE SD MUTE SD TIME MENU V I D E O C M P N T COMPONENT KEYSTONE Basic Operation T urning off the po wer # Press the ...
-
Panasonic PT-L300U - page 23
22 23 P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY VOLUME PICTURE MODE SD MUTE SD TIME MENU V I D E O C M P N T COMPONENT KEYSTONE P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY VOLUME PICTURE MODE SD MUTE SD TIME MENU V I D E O C M P N T COMPONENT KEYSTONE Basic Operation T urning off the po wer # Press the ...
-
Panasonic PT-L300U - page 24
24 25 Basic Operation When a YP B P R signal is being input or SD CARD is selected When a PC/DVI signal is being input * “ GAMMA ADJUST ” is not displayed by PT-L200U. * “ W-BAL R ” , “ W-BAL G ” and “ W-BAL B ” are not displayed when DVI signal is being input. PICTURE PICTURE MODE NORMAL CONTRAST 0 BRIGHT 0 COLOR 0 TINT 0 SHARPNESS ...
-
Panasonic PT-L300U - page 25
24 25 Basic Operation When a YP B P R signal is being input or SD CARD is selected When a PC/DVI signal is being input * “ GAMMA ADJUST ” is not displayed by PT-L200U. * “ W-BAL R ” , “ W-BAL G ” and “ W-BAL B ” are not displayed when DVI signal is being input. PICTURE PICTURE MODE NORMAL CONTRAST 0 BRIGHT 0 COLOR 0 TINT 0 SHARPNESS ...
-
Panasonic PT-L300U - page 26
26 27 Basic Operation Returning a setting to the factory default If you press the NORMAL button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed. B When a menu screen is being displayed All items displayed will be returned ...
-
Panasonic PT-L300U - page 27
26 27 Basic Operation Returning a setting to the factory default If you press the NORMAL button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed. B When a menu screen is being displayed All items displayed will be returned ...
-
Panasonic PT-L300U - page 28
28 29 Basic Operation NOTE: B You can also correct keystone distortion by selecting the KEYSTONE item in the MAIN MENU and pressing ENTER. B Vertical and horizontal keystone distortion can be corrected to ±30 ° of the angle of tilt by PT-L300U. Vertical keystone distortion can be corrected to ±30 ° of the angle of tilt by PT-L200U. However, the ...
-
Panasonic PT-L300U - page 29
28 29 Basic Operation NOTE: B You can also correct keystone distortion by selecting the KEYSTONE item in the MAIN MENU and pressing ENTER. B Vertical and horizontal keystone distortion can be corrected to ±30 ° of the angle of tilt by PT-L300U. Vertical keystone distortion can be corrected to ±30 ° of the angle of tilt by PT-L200U. However, the ...
-
Panasonic PT-L300U - page 30
30 31 Basic Operation Setting the ASPECT This projector allows you to change the aspect ratio to match the type of input signal. Pressing the ASPECT button will change the aspect ratio according to the successive settings shown below. (You can also change the aspect ratio by selecting the POSITION item in the MAIN MENU and pressing ENTER.) * “ S4 ...
-
Panasonic PT-L300U - page 31
30 31 Basic Operation Setting the ASPECT This projector allows you to change the aspect ratio to match the type of input signal. Pressing the ASPECT button will change the aspect ratio according to the successive settings shown below. (You can also change the aspect ratio by selecting the POSITION item in the MAIN MENU and pressing ENTER.) * “ S4 ...
-
Panasonic PT-L300U - page 32
32 33 Basic Operation Changing the displa y langua ge Indicates the language which is currently set # Select LANGUAGE from the MAIN MENU screen and then press the ENTER button. $ Use the FG buttons to select a language and then press the ENTER button. LANGUAGE ENGLISH ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELECT ENTER ESC Using the shutter fu ...
-
Panasonic PT-L300U - page 33
32 33 Basic Operation Changing the displa y langua ge Indicates the language which is currently set # Select LANGUAGE from the MAIN MENU screen and then press the ENTER button. $ Use the FG buttons to select a language and then press the ENTER button. LANGUAGE ENGLISH ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELECT ENTER ESC Using the shutter fu ...
-
Panasonic PT-L300U - page 34
34 35 Basic Operation TINT (NTSC/NTSC 4.43/YP B P R /SD CARD only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish. SHARPNESS Press the H button to make the picture details sharper, and press the I button to make the picture details softer ...
-
Panasonic PT-L300U - page 35
34 35 Basic Operation TINT (NTSC/NTSC 4.43/YP B P R /SD CARD only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish. SHARPNESS Press the H button to make the picture details sharper, and press the I button to make the picture details softer ...
-
Panasonic PT-L300U - page 36
36 37 Basic Operation Pr ojecting sRGB- compatible pictures sRGB is an international color reproduction standard (IEC61966-2- 1) established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings. # Press the F or G button to sel ...
-
Panasonic PT-L300U - page 37
36 37 Basic Operation Pr ojecting sRGB- compatible pictures sRGB is an international color reproduction standard (IEC61966-2- 1) established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings. # Press the F or G button to sel ...
-
Panasonic PT-L300U - page 38
38 39 Basic Operation Adv anced Operation Option settings Use the F and G buttons to select an item, then press the I or H buttons to change the setting. OSD ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. NR (Noise Red ...
-
Panasonic PT-L300U - page 39
38 39 Basic Operation Adv anced Operation Option settings Use the F and G buttons to select an item, then press the I or H buttons to change the setting. OSD ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. NR (Noise Red ...
-
Panasonic PT-L300U - page 40
40 41 Adv anced Operation 4:3 H-POS (4:3 aspect mode only) This sets the horizontal positioning of the projected image when the 4:3 aspect ratio is selected. (Refer to page 31.) FR ONT/REAR This setting should be changed in accordance with the projector setting-up method. Set to “FRONT” when using a normal reflective screen with the projector p ...
-
Panasonic PT-L300U - page 41
40 41 Adv anced Operation 4:3 H-POS (4:3 aspect mode only) This sets the horizontal positioning of the projected image when the 4:3 aspect ratio is selected. (Refer to page 31.) FR ONT/REAR This setting should be changed in accordance with the projector setting-up method. Set to “FRONT” when using a normal reflective screen with the projector p ...
-
Panasonic PT-L300U - page 42
42 43 Adv anced Operation Inser ting and remo ving the SD memory card About the SD menu The still image data and moving image data that is stored on SD memory cards can be played back using the SD menu. Displa ying the SD menu Press the SD button to change the display to the SD CARD screen. Inser ting the SD memory card Insert the SD memory card so ...
-
Panasonic PT-L300U - page 43
42 43 Adv anced Operation Inser ting and remo ving the SD memory card About the SD menu The still image data and moving image data that is stored on SD memory cards can be played back using the SD menu. Displa ying the SD menu Press the SD button to change the display to the SD CARD screen. Inser ting the SD memory card Insert the SD memory card so ...
-
Panasonic PT-L300U - page 44
44 45 Adv anced Operation Pla ying bac k still ima ges The PICTURE option lets you play back still image data. Slide pla ybac k of still ima ges “SLIDE SHOW” lets you play back still images in a certain order using one of three available playback methods. Use the F and G buttons to select an item, and then press the ENTER button. Use the I and ...
-
Panasonic PT-L300U - page 45
44 45 Adv anced Operation Pla ying bac k still ima ges The PICTURE option lets you play back still image data. Slide pla ybac k of still ima ges “SLIDE SHOW” lets you play back still images in a certain order using one of three available playback methods. Use the F and G buttons to select an item, and then press the ENTER button. Use the I and ...
-
Panasonic PT-L300U - page 46
46 47 Adv anced Operation SETTING1 MANUAL MODE NEW USER SET AUTO MODE SETTING USER SET If adding settings for a new user, use the I and H buttons to select “NEW” and then press the ENTER button. The user setting edit screen will then be displayed. If you would like to change the settings for an existing user, use the I and H buttons to select t ...
-
Panasonic PT-L300U - page 47
46 47 Adv anced Operation SETTING1 MANUAL MODE NEW USER SET AUTO MODE SETTING USER SET If adding settings for a new user, use the I and H buttons to select “NEW” and then press the ENTER button. The user setting edit screen will then be displayed. If you would like to change the settings for an existing user, use the I and H buttons to select t ...
-
Panasonic PT-L300U - page 48
48 49 Adv anced Operation SETUP This describes how to set the playback interval and angle of rotation for still images in the user settings. # Use the F , G , I and H buttons to select a still image from the user settings, and then press the ENTER button. $ Select “SETTING” and then press the ENTER button. “INTERVAL ” Use the I and H button ...
-
Panasonic PT-L300U - page 49
48 49 Adv anced Operation SETUP This describes how to set the playback interval and angle of rotation for still images in the user settings. # Use the F , G , I and H buttons to select a still image from the user settings, and then press the ENTER button. $ Select “SETTING” and then press the ENTER button. “INTERVAL ” Use the I and H button ...
-
Panasonic PT-L300U - page 50
50 51 Adv anced Operation Others Indicator s There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you notice that one of the indicators is on, turn off the po ...
-
Panasonic PT-L300U - page 51
50 51 Adv anced Operation Others Indicator s There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you notice that one of the indicators is on, turn off the po ...
-
Panasonic PT-L300U - page 52
52 53 Others Cleaning and replacing the air filter If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will flash and the projector power will turn off. The air filter should be cleaned every 100 hours of use, depending on the location where the projector is being used. Cleaning pr oc ...
-
Panasonic PT-L300U - page 53
52 53 Others Cleaning and replacing the air filter If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will flash and the projector power will turn off. The air filter should be cleaned every 100 hours of use, depending on the location where the projector is being used. Cleaning pr oc ...
-
Panasonic PT-L300U - page 54
54 55 Others Lamp unit replacement pr ocedure NOTE: B If the lamp usage time has passed 2000 hours (when LAMP POWER has been set to “HIGH”), the projector will switch to standby mode after approximately 10 minutes of operation. The steps * to - on the next page should thus be completed within 10 minutes. # Turn off the MAIN POWER switch accordi ...
-
Panasonic PT-L300U - page 55
54 55 Others Lamp unit replacement pr ocedure NOTE: B If the lamp usage time has passed 2000 hours (when LAMP POWER has been set to “HIGH”), the projector will switch to standby mode after approximately 10 minutes of operation. The steps * to - on the next page should thus be completed within 10 minutes. # Turn off the MAIN POWER switch accordi ...
-
Panasonic PT-L300U - page 56
56 57 Others Bef ore calling f or service Before asking for service, check the following points. Problem Possible cause Power does not turn on. No picture appears. The picture is fuzzy. COLOR is too light or TINT is poor No sound can be heard. B The power cord may not be connected. B The MAIN POWER switch is turned off. B The main power supply is n ...
-
Panasonic PT-L300U - page 57
56 57 Others Bef ore calling f or service Before asking for service, check the following points. Problem Possible cause Power does not turn on. No picture appears. The picture is fuzzy. COLOR is too light or TINT is poor No sound can be heard. B The power cord may not be connected. B The MAIN POWER switch is turned off. B The main power supply is n ...
-
Panasonic PT-L300U - page 58
58 59 Others Specifications Power supply: 100 V–240 V ~, 50 Hz/60 Hz Power consumption: 180 W (During standby (when fan is stopped): Approx. 1.5 W) Amps: 2.2 A–0.8 A LCD panel: Panel size (diagonal): 0.7 type (17.78 mm) Aspect ratio: 16:9 Display method: 3 transparent LCD panels (RGB) Drive method: Active matrix method Pixels: PT-L300U: 518 400 ...
-
Panasonic PT-L300U - page 59
58 59 Others Specifications Power supply: 100 V–240 V ~, 50 Hz/60 Hz Power consumption: 180 W (During standby (when fan is stopped): Approx. 1.5 W) Amps: 2.2 A–0.8 A LCD panel: Panel size (diagonal): 0.7 type (17.78 mm) Aspect ratio: 16:9 Display method: 3 transparent LCD panels (RGB) Drive method: Active matrix method Pixels: PT-L300U: 518 400 ...
-
Panasonic PT-L300U - page 60
60 61 Others Appendix List of compatible signals *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected B Some loss of data occurs to ma ...
-
Panasonic PT-L300U - page 61
60 61 Others Appendix List of compatible signals *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected B Some loss of data occurs to ma ...
-
Panasonic PT-L300U - page 62
62 63 Others Pin No. Signal # Earth (Luminance signal) Earth (Color signal) Luminance signal Color signal $ % & B The pin layout and signal names for the RGB input connector are shown below. Pin No. Signal # R G/G·SYNC B SDA $ % . / HD/SYNC 0 VD 1 SCL Pin + is spare. Pins & – * , , and - are for earth. Pins . and 1 functions are only val ...
-
Panasonic PT-L300U - page 63
62 63 Others Pin No. Signal # Earth (Luminance signal) Earth (Color signal) Luminance signal Color signal $ % & B The pin layout and signal names for the RGB input connector are shown below. Pin No. Signal # R G/G·SYNC B SDA $ % . / HD/SYNC 0 VD 1 SCL Pin + is spare. Pins & – * , , and - are for earth. Pins . and 1 functions are only val ...
-
Panasonic PT-L300U - page 64
64 65 Others DCF standar d This projector can only play back image files which comply with the DCF specification. The DCF specification imposes the following conditions. Image files or folders which do not conform to these conditions cannot be recognised by the projector. Limits on f older names Folders must be created as sub-folders of the DCIM fo ...
-
Panasonic PT-L300U - page 65
64 65 Others DCF standar d This projector can only play back image files which comply with the DCF specification. The DCF specification imposes the following conditions. Image files or folders which do not conform to these conditions cannot be recognised by the projector. Limits on f older names Folders must be created as sub-folders of the DCIM fo ...
-
Panasonic PT-L300U - page 66
67 Others Précautions concernant la sécurité A VER TISSEMENT En cas de problème (pas d’image ou de son), ou si le projecteur dégage de la fumée ou une odeur étrange, éteindre l’appareil et débrancher immédiatement la fiche d’alimentation de la prise de courant. B Ne pas continuer d’utiliser le projecteur dans ces cas, autrement ce ...
-
Panasonic PT-L300U - page 67
67 Others Précautions concernant la sécurité A VER TISSEMENT En cas de problème (pas d’image ou de son), ou si le projecteur dégage de la fumée ou une odeur étrange, éteindre l’appareil et débrancher immédiatement la fiche d’alimentation de la prise de courant. B Ne pas continuer d’utiliser le projecteur dans ces cas, autrement ce ...
-
Panasonic PT-L300U - page 68
69 Others 68 incendie ou des chocs électriques. Ne pas laisser les bornes + et - de la pile entrer en contact avec des objets métalliques tels que des colliers ou des épingles à cheveux. B Cela peut faire que la pile fuit, surchauffe, éclate ou prenne feu. B Garder la pile dans un sachet en plastique et la maintenir éloignée des objets méta ...
-
Panasonic PT-L300U - page 69
69 Others 68 incendie ou des chocs électriques. Ne pas laisser les bornes + et - de la pile entrer en contact avec des objets métalliques tels que des colliers ou des épingles à cheveux. B Cela peut faire que la pile fuit, surchauffe, éclate ou prenne feu. B Garder la pile dans un sachet en plastique et la maintenir éloignée des objets méta ...
-
Panasonic PT-L300U - page 70
71 Others Précautions concernant la manipulation Précautions à prendre lors du déplacement du pr ojecteur Veiller à bien mettre le capuchon d’objectif en place avant de déplacer le projecteur. L’objectif de projection est très sensible aux vibrations et aux chocs. Lorsqu’on déplace le projecteur, utiliser la sacoche de transport fourn ...
-
Panasonic PT-L300U - page 71
71 Others Précautions concernant la manipulation Précautions à prendre lors du déplacement du pr ojecteur Veiller à bien mettre le capuchon d’objectif en place avant de déplacer le projecteur. L’objectif de projection est très sensible aux vibrations et aux chocs. Lorsqu’on déplace le projecteur, utiliser la sacoche de transport fourn ...
-
Panasonic PT-L300U - page 72
73 Others 72 À propos de la fente de carte mémoire SD S’assurer qu’il n’y ait aucun objet étranger dans la fente lorsqu’on insère une carte mémoire SD en option. Ces objets risqueraient d’endommager la carte et la fente. À propos de l’écran Si l’écran utilisé est sale, endommagé ou décoloré, des projections de bonne qualit ...
-
Panasonic PT-L300U - page 73
73 Others 72 À propos de la fente de carte mémoire SD S’assurer qu’il n’y ait aucun objet étranger dans la fente lorsqu’on insère une carte mémoire SD en option. Ces objets risqueraient d’endommager la carte et la fente. À propos de l’écran Si l’écran utilisé est sale, endommagé ou décoloré, des projections de bonne qualit ...
-
Panasonic PT-L300U - page 74
75 Others 74 Méthode de remplacement du bloc de lampe REMARQUE: B Si le temps d’utilisation de la lampe a dépassé 2000 heures (lorsque PUIS LAMPE a été mis sur “CHAUDE”), le projecteur passe en mode d’attente après environ dix minutes de fonctionnement. Dès lors, faire les étapes * à - à la page suivante dans les 10 minutes. Témo ...
-
Panasonic PT-L300U - page 75
75 Others 74 Méthode de remplacement du bloc de lampe REMARQUE: B Si le temps d’utilisation de la lampe a dépassé 2000 heures (lorsque PUIS LAMPE a été mis sur “CHAUDE”), le projecteur passe en mode d’attente après environ dix minutes de fonctionnement. Dès lors, faire les étapes * à - à la page suivante dans les 10 minutes. Témo ...
-
Panasonic PT-L300U - page 76
Professional/Industrial Video Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 392-4443 3330 Cahuenga Blvd West Los Angels, CA 90068 (323) 436-3500 Technical Support: (800) 524-1448 (800) 526-6610 FAX: (201) 392-6514 E-Mail: pbtssupport@panaso ...
Do you have a question concerning Panasonic PT-L300U?
Use the form below
If you did not solve your problem by using a manual Panasonic PT-L300U, ask a question using the form below. If a user had a similar problem with Panasonic PT-L300U it is likely that he will want to share the way to solve it.