Manual Black & Decker BC40EB

12 pages 0.53 mb
Download

Go to site of 12

Summary
  • Black & Decker BC40EB - page 1

    40 AMP SMAR T ™ FULL Y A UT OMA TIC B A TTER Y CHARGER INSTR UCTION MANU AL Thank you for choosing Black & Decker! Go to www .BlackandDecker .com/NewOwner to register your new product Catalog Number BC40EB BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE Y OU CALL, HA VE THE CA T ALOG No, AND D A TE CODE A V AILA ...

  • Black & Decker BC40EB - page 2

    1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . • AVOID DANGEROUS ENVIRONMENTS: Don’t use appliances in damp or wet location ...

  • Black & Decker BC40EB - page 3

    2 SAFETY GUIDELINES / DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . CAUTION: Indicates a potentially hazardous situation which, if not avoided, may re ...

  • Black & Decker BC40EB - page 4

    3 and/or severe burns. Be aware of first aid procedures in case of accidental contact with battery acid. • Have plenty of fresh water and soap nearby in case battery acid contacts skin. • If battery acid contacts skin or clothing, wash immediately with soap and water for at least 10 minutes and get medical attention immediately . • Never smok ...

  • Black & Decker BC40EB - page 5

    4 Follow these steps when the battery is installed in a vehicle. A spark near the batter y may cause an explosion. CAUTION: TO REDUCE RISK OF A SP ARK NEAR THE BA TTERY : 1. Position AC and DC cords away from hood, door , or moving engine parts. 2. Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons. 3. Check ...

  • Black & Decker BC40EB - page 6

    5 to allow for the maximum proper internal chemical energy transfer . At the end of Stage 2, the charger will automatically move into Stage 3 charge mode. Stage Three — T op-Off Charge voltage is automatically maintained and reduced to a predetermined level while current is adjusted for a safe, effective battery charge. At the end of Stage 3, the ...

  • Black & Decker BC40EB - page 7

    6 4/10/20/40A AMP (Charge Rate Selector) (Step 2) allows the user to select the charge rate based on battery size. This selection and the actual batter y charge rate are monitored by the microprocessor . The charger will stop charging if the rate is too fast or too slow for the battery size or condition. 110 AMP Engine Start places the charger in a ...

  • Black & Decker BC40EB - page 8

    7 Charge Rate Selection After charger clamps are correctly connected, plug the charger into a 120 volt AC outlet and the charger will show “000” on the Digital Display , indicating power has been applied. Select the proper charge current rate based on battery size. Press the 4/10/20/40 AMP button and the charger will begin charging at 4 amps. P ...

  • Black & Decker BC40EB - page 9

    8 WARNING: BURST HAZARD: • NEVER EQUALIZE A GEL OR AGM BA TTERY, these may burst and cause SERIOUS INJURY and property damage. • Remove or disconnect the vehicle’ s batter y when equalizing. The frequency which the equalization process needs to be run depends on the use of the battery . The more the battery is used, the more undercharged it b ...

  • Black & Decker BC40EB - page 10

    9 Remove or disconnect the vehicle’ s batter y when reconditioning. 1. Make sure the charger is in initiation state with a circulating pattern on the display or in charge OFF mode with “000” on the display . If not, press 4/10/20/40 AMP button repeatedly until “000” shows on the display . 2. Press the Battery Recondition button to start t ...

  • Black & Decker BC40EB - page 11

    10 F01 — Internal Shorted Cell Battery If the battery being charged has an internal shorted cell, the F01 will show. W e recommend taking your battery to a certified automotive service center for evaluation. F02 — Bad Battery Connection or Batter y Voltage T oo Low to Accept Charge When F02 appears, the most common cause is poor connection to b ...

  • Black & Decker BC40EB - page 12

    11 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center . If you need assistance regarding accessories, please call: 1-800-544-6986. WARNING: The use of any accessory not recommended for use with this tool could be hazardous SER VICE INFORMA TION All Black & Decker Service ...

Manufacturer Black & Decker Category Battery Charger

Documents that we receive from a manufacturer of a Black & Decker BC40EB can be divided into several groups. They are, among others:
- Black & Decker technical drawings
- BC40EB manuals
- Black & Decker product data sheets
- information booklets
- or energy labels Black & Decker BC40EB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Black & Decker BC40EB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Black & Decker BC40EB, service manual, brief instructions and user manuals Black & Decker BC40EB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Black & Decker BC40EB.

A complete manual for the device Black & Decker BC40EB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Black & Decker BC40EB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Black & Decker BC40EB.

A complete Black & Decker manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Black & Decker BC40EB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Black & Decker BC40EB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Black & Decker BC40EB, that we can find in the current document
3. Tips how to use the basic functions of the device Black & Decker BC40EB - which should help us in our first steps of using Black & Decker BC40EB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Black & Decker BC40EB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Black & Decker BC40EB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Black & Decker BC40EB?

Use the form below

If you did not solve your problem by using a manual Black & Decker BC40EB, ask a question using the form below. If a user had a similar problem with Black & Decker BC40EB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)