English dropdown-ico

Manual ATen VS172

12 pages Not applicable
Download

Go to site of 12

Summary
  • ATen VS172 - page 1

    VS172 / VS174 2/4-Port DVI Dual Link Splitter with Audio RS-232 Control T ool User Manual www.aten.com ...

  • ATen VS172 - page 2

    VS172 / VS174 RS-232 Control T ool 2 FCC Information This is an FCC Class A product. In a dom estic environment this product may cause radio interference in which ca se the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC R ...

  • ATen VS172 - page 3

    VS172 / VS174 RS-232 Control Tool 3 RS-232 Control T ool Operation Overview The VS172 / VS174 2/4-Port DVI Dual Link Split ter with Audio has a built- in bi-directional RS-232 seri al interface that allows system control through a high-end controller, PC, and/or home autom ation / home theater software package. RS-232 serial operations in a VS172 / ...

  • ATen VS172 - page 4

    VS172 / VS174 RS-232 Control T ool 4 GUI Main Page The RS232 Control Tool is a convenient and intu itive method to manage the RS-232 commands in your VS172 / VS174 installa tion from one screen. To invoke the GUI, simply cl ick on the icon in your file system. The interface appears, and opens on the Switch Port page by default, as below: The variou ...

  • ATen VS172 - page 5

    VS172 / VS174 RS-232 Control Tool 5 Switch Port On the Switch Port page, the following actions are possible:  Select the Output port from the drop-down menu (options are Po rts 1–4 and default *). Addit ional drop-down me nus are added for every cascaded unit (up to three).  Tu r n t h e Display On or Of f.  Click Refresh to detect the c ...

  • ATen VS172 - page 6

    VS172 / VS174 RS-232 Control T ool 6 Switch Port Commands These actions can also be performed by keying the command into the text box, and clicking Send . The formula for Switch Port commands are as follows: Switch Command + Output + Port + Control [Enter] For example, to switch output port to port 02, type the followi ng: sw o02 on [Enter] The fol ...

  • ATen VS172 - page 7

    VS172 / VS174 RS-232 Control Tool 7 EDID Mode On the EDID Mode page, the following actions are possible:  Click on Port 1(*) to implement the EDID of th e connected display to Port 1, and pass it to the video source (default).  Click Auto to implement the EDID of all connected displays. Th e VS172 / VS174 uses the best resolution for all disp ...

  • ATen VS172 - page 8

    VS172 / VS174 RS-232 Control T ool 8 Mute On the Mute page, the following actions are possible:  Select an Output port from the drop-down menu.  Click ON to mute the selected port.  Click OFF to enable the audio of the selected port.  Click Send to send the command. Mute Command Enable or disable audi o coming from the output port(s) us ...

  • ATen VS172 - page 9

    VS172 / VS174 RS-232 Control Tool 9 Read Info On the Read Info page, the following actions are possible:  Select an Output from the drop-down menu.  Click V ersion to view the current firmware version.  Click EDID to see which EDID setting is implemented to device 01.  Click Vi d e o to view the v ideo status (on /off).  Click Audio ...

  • ATen VS172 - page 10

    VS172 / VS174 RS-232 Control T ool 10 Reset On the Reset page, the following actions are p ossible:  Select an Output port from the drop-down menu.  Click Reset to reset the VS172 / VS174 to default factory settings.  Click Send to send the command. Reset Comma nd The formula for the Reset command is as follows: Reset Command + Out put + P ...

  • ATen VS172 - page 11

    VS172 / VS174 RS-232 Control Tool 11 RS-232 Setting The controller’s seri al port should be conf igured as follows: To select the serial port, do the following:  Select the port and baud rate from the drop-down menus and click CONNECT . V erification After entering a command, a verificatio n message appears at the end of the command line as fo ...

  • ATen VS172 - page 12

    VS172 / VS174 RS-232 Control T ool 12 This Page Intentionally Left Blank ...

Manufacturer ATen Category Splitter

Documents that we receive from a manufacturer of a ATen VS172 can be divided into several groups. They are, among others:
- ATen technical drawings
- VS172 manuals
- ATen product data sheets
- information booklets
- or energy labels ATen VS172
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATen VS172.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATen VS172, service manual, brief instructions and user manuals ATen VS172. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATen VS172.

Similar manuals

A complete manual for the device ATen VS172, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATen VS172 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATen VS172.

A complete ATen manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATen VS172 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATen VS172, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATen VS172, that we can find in the current document
3. Tips how to use the basic functions of the device ATen VS172 - which should help us in our first steps of using ATen VS172
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATen VS172
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATen VS172 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATen VS172?

Use the form below

If you did not solve your problem by using a manual ATen VS172, ask a question using the form below. If a user had a similar problem with ATen VS172 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)