English dropdown-ico

Manual Sanyo PLC-XE34

78 pages 11.42 mb
Download

Go to site of 78

Summary
  • Sanyo PLC-XE34 - page 1

    Owner ’ s Manual Multimedia Projector MODEL PLC-XE34 Network Supported ❏ Wired LAN Refer to the Owner's Manuals below for details about network function. ❏ Network Set-up and Operation ...

  • Sanyo PLC-XE34 - page 2

    2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology . ♦ Compact Design This projector is designed compact in size and ...

  • Sanyo PLC-XE34 - page 3

    3 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .2 T able of Contents . . . . . . . . . . . . . . . . . . . . . . 3 T o t h e O w n e r .......................... 4 Safety Instruc ...

  • Sanyo PLC-XE34 - page 4

    4 T o the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBOL INDICA TES THA T T ...

  • Sanyo PLC-XE34 - page 5

    5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...

  • Sanyo PLC-XE34 - page 6

    6 Safety Instructions Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not ...

  • Sanyo PLC-XE34 - page 7

    7 Safety Instructions Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment g ...

  • Sanyo PLC-XE34 - page 8

    8 Part Names and Functions ⑤ ⑦ ⑧ ③ ② Front Back ⑥ ① T op controls and Indicators ② Zoom Ring ③ Focus Ring ④ Speaker ⑤ Infrared Remote Receiver ⑥ Projection Lens ⑦ Lens Cap (See page 61 for attaching.) ⑧ Air Intake V ent ⑨ Lamp Cover ⑩ T erminals and Connectors ⑪ LAN Connection T erminal ⑫ Power Cord Connector ⑬ ...

  • Sanyo PLC-XE34 - page 9

    9 ⑦ Part Names and Functions Rear T erminal ② ③ ① ④ ⑥ ⑦ ⑤ ⑦ AUDIO IN （ Video) Connect the audio output signal from video equipment connected to ⑤ to this jack. For a mono audio signal (a single audio jack), connect it to L(MONO) jack. (pp.14-16). ⑤ VIDEO IN Connect the composite video output signal to this jack (p.15). ② C ...

  • Sanyo PLC-XE34 - page 10

    10 Part Names and Functions T op Control ⑦ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.62, 70). ⑧ W ARNING indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projector exceeds the operating range (pp.59, 70). ④ ON/ST AND? ...

  • Sanyo PLC-XE34 - page 11

    1 1 Part Names and Functions ✔ Note: T o ensure safe operation, please observe the following precautions: – Do not bend, drop or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner , spray , or any chemical material. Remote Control ⑦ ⑭ ⑩ ⑳ ④ ⑱ ② ⑧ ⑨ ⑬ ⑯ ⑤ ? ...

  • Sanyo PLC-XE34 - page 12

    12 Part Names and Functions T o ensure safe operation, please observe the following precautions :  Use two (2) AAA or LR03 type alkaline batteries.  Always replace batteries in sets.  Do not use a new battery with a used battery .  A void contact with water or liquid.  Do not expose the remote control to moisture or heat.  Do not ...

  • Sanyo PLC-XE34 - page 13

    13 Positioning the Projector For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. Installation ✔ Note: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • All measurements a ...

  • Sanyo PLC-XE34 - page 14

    14 Installation Connecting to a Computer Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection • VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.) • Audio Cables (*One cable is supplied; other cables are not supplied with the projector .) ✔ Note: ...

  • Sanyo PLC-XE34 - page 15

    15 Installation Connecting to V ideo Equipment Cables used for connection • Video Cable • S-Video Cable • S-Video-VGA Cable • Audio Cables (Cables are not supplied with the projector . ) ✔ Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 73 for ordering optional cables. Unplu ...

  • Sanyo PLC-XE34 - page 16

    16 Installation Connecting to Component V ideo and RGB (Scart) Equipment ✔ Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 73 for ordering optional cables. Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not sup ...

  • Sanyo PLC-XE34 - page 17

    17 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-240 V AC an d it a ut om at ic al ly sele ct s the cor re ct i np ut v ol ta ge . It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of powe ...

  • Sanyo PLC-XE34 - page 18

    18 The preparation display will disappear after 30 seconds. (See page 53 for Lamp control status.) T urning On the Projector Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 8, 61). Press the ON/ST AND-BY button on the top control or on the remote control. The POWER indicator l ...

  • Sanyo PLC-XE34 - page 19

    19 What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number . Refer to the PIN code lock function in the Setting Menu on pages 54-55 for locking operation of ...

  • Sanyo PLC-XE34 - page 20

    20 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, W AIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . Power off? disappears after 4 seconds. T urning Off the Projector Press the ON/ST AND-BY button on the top control or on the remote control, and Power off? appears on the screen. Press t he ON/ ST AND-BY but ton aga in to turn ...

  • Sanyo PLC-XE34 - page 21

    21 Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Use the Poin ...

  • Sanyo PLC-XE34 - page 22

    22 Computer 1 RGB Computer 2 RGB Video ► ƘƘƘ Menu Bar For detailed functions of each menu, see “Menu T ree” on pages 68-69. Basic Operation ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ③ Image select For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) , Colorboard and i ...

  • Sanyo PLC-XE34 - page 23

    23 Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows: Press the KEYS ...

  • Sanyo PLC-XE34 - page 24

    24 Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Sound . Press the Point  or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few second ...

  • Sanyo PLC-XE34 - page 25

    25 Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source ...

  • Sanyo PLC-XE34 - page 26

    26 Basic Operation NO SHOW button Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.51 for detail of Setting for the P-timer function. T o stop the count time, press the P-TIMER button. T o cancel the P-timer function, press and hold the P-TIMER button. P-TIMER button Press the IMAGE button on th ...

  • Sanyo PLC-XE34 - page 27

    27 Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 3 Computer Input COMPUTER 1 button ✔ Note: When the Input Search function is set to On1 or On2 in ...

  • Sanyo PLC-XE34 - page 28

    28 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional ...

  • Sanyo PLC-XE34 - page 29

    29 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync , T otal dots , Horizontal and V ertical positions to conform to your computer . PC adjust Menu Auto PC Adjustment T o store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector . Once the parameters are st ...

  • Sanyo PLC-XE34 - page 30

    30 Computer Input PC adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually a ...

  • Sanyo PLC-XE34 - page 31

    31 Computer Input Store T o store the adjusted data, select Store and then press the Point  or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. Mode free T o clear the stored data, select Mode free and then press the Point  or the SELECT button. Move the highlight ...

  • Sanyo PLC-XE34 - page 32

    32 Computer Input Image select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Blackboard (Green) Standard Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Blackboard (Green) , Colorboard , Image 1 , Image 2 , Image 3 and Image 4 by pressing the IMAGE button on the remot ...

  • Sanyo PLC-XE34 - page 33

    33 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point  buttons to select Image adjust and then press the Point  or the SELECT button. 1 2 Use the Point  buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the ...

  • Sanyo PLC-XE34 - page 34

    34 Computer Input Store This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal T rue Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the proje ...

  • Sanyo PLC-XE34 - page 35

    35 Computer Input Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point  buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM  or t ...

  • Sanyo PLC-XE34 - page 36

    36 Choose Video or S-video by pressing the VIDEO or the S- VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below . 1 2 Input Menu Input Source Selection (V ideo, S-video) V ideo Input Direct Operation W h e n vi d eo in p ut si g na l is co n ne c t e d t o ...

  • Sanyo PLC-XE34 - page 37

    37 V ideo Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 Use the Point  buttons to select Computer 1 and then press the Point  butt ...

  • Sanyo PLC-XE34 - page 38

    38 V ideo Input V ideo System Selection 1 A V System Menu (Video or S-video) A V System Menu (Component) 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among P AL , SECAM , NTSC , NTSC 4.43 , P AL-M , and P AL-N . P AL/SECAM/NTSC/NTSC4.43/P AL-M/P AL-N T h e p r o j e c t o r a u t o m a t i c ...

  • Sanyo PLC-XE34 - page 39

    39 V ideo Input Image select Menu Select the desired image mode among Dynamic , Standard , Cinema , Blackboard (Green) , Colorboard , Image 1 , Image 2 , Image 3 and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode adjusted with fine tone. Cinema Blackboard (Green) Image 1–4 IMAGE button Dynamic Cinema Image Mode ...

  • Sanyo PLC-XE34 - page 40

    40 V ideo Input Image Adjustment 1 2 Press the Point  button to decrease the contrast; press the Point  button to increase the contrast (from 0 to 63). Press the Point  button to decrease the brightness; press the Point  button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point  button to lighten red to ...

  • Sanyo PLC-XE34 - page 41

    41 V ideo Input Use the Point  buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point  button to decrease the sharpness of the image; press the Point  button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced video signal can be displayed in progressive ...

  • Sanyo PLC-XE34 - page 42

    42 V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu 1 2 Provide the image to fit the screen size while maintaining the aspect ratio of the input signal. Custom adj. ✔ Note: • When no signal is detected, Normal is set automatically . • T ...

  • Sanyo PLC-XE34 - page 43

    43 Setting Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point  buttons to select Setting and press the Point  or the SELECT button to access the submenu items. 1 2 Use the Point  buttons to select the desired item and then press the Point  or the SELECT button to access the selected item. Thi ...

  • Sanyo PLC-XE34 - page 44

    44 Setting ✔ Note: • Auto Keystone corrects vertical distortion only , not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.49). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected prop ...

  • Sanyo PLC-XE34 - page 45

    45 Setting Keystone This function is used to adjust keystone distortion of the projected image. Use the Point  buttons to choose the item you want to adjust. Keystone T o correct keystone distortion, press the SELECT button. Keystone ? ...

  • Sanyo PLC-XE34 - page 46

    46 Setting Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select , capture , Logo PIN code lock and Logo PIN code change functions. ✔ Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. Logo select This function ...

  • Sanyo PLC-XE34 - page 47

    47 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select Y es to capture the projected image. After capturing the projected image, go to the Logo select function and set ...

  • Sanyo PLC-XE34 - page 48

    48 Setting Enter a Logo PIN code Use the Point  buttons to enter a number . Press the Point  buttons to fix the number and move the red frame pointer to the next box. The number changes to ✳ . If you fixed an incorrect number , use the Point  buttons to move the pointer to the number you want to correct, and then enter the corre ...

  • Sanyo PLC-XE34 - page 49

    49 Setting Ceiling Rear Ceiling When this function is set to On , the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector . Rear When this function is set to On , the picture will be left/right reversed. This function is used to project the image from rear of the screen. T ...

  • Sanyo PLC-XE34 - page 50

    50 Setting T ime left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready ............... When the lamp has been fully cooled down, the ...

  • Sanyo PLC-XE34 - page 51

    51 Setting Standby mode This function is available when operating the projector via network. Network .... Supply the power to the network function even after turning off the projector by pressing the ON/ST AND-BY button on the remote control. Y ou can turn on/off the projector via network, modify network environment, and receive an e-mail about pro ...

  • Sanyo PLC-XE34 - page 52

    52 Setting Closed Caption Closed Caption Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point  buttons to select Off , CC1 , CC2 , CC3 or CC4 . If the closed caption is not clear ...

  • Sanyo PLC-XE34 - page 53

    53 Setting Remote control This function allows you to change brightness of the screen. Lamp contr ol Lamp control ✔ Note: • Lamp mode cannot be changed for a while after turning on the projector . Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized. This projector provides ...

  • Sanyo PLC-XE34 - page 54

    54 Setting Key lock Key lock Security (Key lock and PIN code lock) PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. Select Key lock and then press the SELECT button, and select the desired item by pressing the Point  buttons. ..... Unlocked. ..... Lock the operation of ...

  • Sanyo PLC-XE34 - page 55

    55 Setting Use the Point  buttons to select Off , On1 or On2 , and then press the SELECT button to make a choice. Change the PIN code lock setting Enter a PIN code Use the Point  buttons to enter a number . Press the Point   buttons to fix the number and move the red frame pointer to the next box. The number changes to ✳ . If yo ...

  • Sanyo PLC-XE34 - page 56

    56 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation ( L1 ), but it takes more time to cool the projector down. Fan Choose the running speed of cooling fans from the following options acc ...

  • Sanyo PLC-XE34 - page 57

    57 Setting Factory default This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default W arning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 w ...

  • Sanyo PLC-XE34 - page 58

    58 Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . H-sync freq. V -sync freq. Lamp counter Information Menu The horizontal frequency of the input signal is displayed in KHz , or - - - - KHz when no signal. The vertical frequenc ...

  • Sanyo PLC-XE34 - page 59

    59 Information The W ARNING indicator shows the state of the function which protects the projector . Check the state of the W ARNING indicator and the POWER indicator to take proper maintenance. W ARNING indicator The projector is shut down and the W ARNING indicator is blinking red. When the temperature inside the projector reaches a certain level ...

  • Sanyo PLC-XE34 - page 60

    60 Maintenance and Cleaning Filter prevents dust from accumulating on the optical elements inside the projector . Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector . If a “Filter warning” icon appears on the s ...

  • Sanyo PLC-XE34 - page 61

    61 Maintenance and Cleaning Cleaning the Projector Cabinet Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an ...

  • Sanyo PLC-XE34 - page 62

    62 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Follow these steps to replace the ...

  • Sanyo PLC-XE34 - page 63

    63 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard.             ? ...

  • Sanyo PLC-XE34 - page 64

    64 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – W ait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 18. – Check the W ARNING indicator . If the WARNI ...

  • Sanyo PLC-XE34 - page 65

    65 Appendix No image – Check the connection between your computer or video equipment and the projector . See pages 14-16. – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector . See your computer ’s instruction manual for the se ...

  • Sanyo PLC-XE34 - page 66

    66 Appendix The image is distorted or runs off. – Check PC adjust menu or Screen menu and adjust them. See pages 30-31, 34-35. PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up. you have set). See pages 19, 54-55. The Remote Control does – Check the batteries. not work. – Make ...

  • Sanyo PLC-XE34 - page 67

    67 W ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain service. This ...

  • Sanyo PLC-XE34 - page 68

    68 Appendix Menu T ree SVGA 1 Mode 1 Mode 2 - - - - T otal dots Horizontal V ertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Normal T rue Digital zoom – Custom 0–63 0–63 Computer Input PC adjust Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 I ...

  • Sanyo PLC-XE34 - page 69

    69 Appendix Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N Video Input Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard (Green) Image 1 Image 2 Image 3 Normal 0–63 0–63 Off Image select System (2) System (3) Image Adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0–63 0–63 0–63 ...

  • Sanyo PLC-XE34 - page 70

    70 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. ✽ When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow . When this indicator lights yellow , replace the projection lamp with a new one promptly . (pp. 56, 62) The projector is off. (T ...

  • Sanyo PLC-XE34 - page 71

    71 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 ...

  • Sanyo PLC-XE34 - page 72

    72 Appendix T echnical Specifications Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 13.13" x 3.35" x 9.72" (333.5mm x 85.2mm x 247.0mm) (Not including protrusions) Net Weight 5.7 lbs (2.6 kg)          ...

  • Sanyo PLC-XE34 - page 73

    73 Appendix Model No. COMPONENT -VGA Cable : POA-CA-COMPVGA S-video-VGA Cable : POA-CA-VGAS SCART -VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 Soft Carrying Case : POA-CAC-VCL2 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Optional Parts Accessories O ...

  • Sanyo PLC-XE34 - page 74

    74 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner ’s manual of “Network Set-up and Operat ...

  • Sanyo PLC-XE34 - page 75

    75 Appendix COMPUTER IN 1 / S-VIDEO IN / COMPONENT IN T erminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red/Cr/S-C Input Ground (Horiz.sync.) Green/Y/S-Y Input ----- Blue/Cb/--- Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Input/Output (Composite H/V ...

  • Sanyo PLC-XE34 - page 76

    76 Appendix Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center . PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of th ...

  • Sanyo PLC-XE34 - page 77

    77 Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 10.0(0.39) 99.5 (3.92) 46.0 (1.81) 9.0 (0.35) 85.2 (3.35) 138.0 (5.43) 247.0 (9.72) 333.5 (13.13) º 10 MAX 50.0 (1.97) 90.0 (3.54) 19.0 (0.75) 90.0 (3.54) 217.0 (8.54) 51.0 (2.01) 10.0 (0.39) 20.0 (0.79) ...

  • Sanyo PLC-XE34 - page 78

    KJ2AC ...

Manufacturer Sanyo Category Projector

Documents that we receive from a manufacturer of a Sanyo PLC-XE34 can be divided into several groups. They are, among others:
- Sanyo technical drawings
- PLC-XE34 manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo PLC-XE34
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo PLC-XE34.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo PLC-XE34, service manual, brief instructions and user manuals Sanyo PLC-XE34. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo PLC-XE34.

Similar manuals

A complete manual for the device Sanyo PLC-XE34, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo PLC-XE34 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo PLC-XE34.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo PLC-XE34 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo PLC-XE34, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo PLC-XE34, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo PLC-XE34 - which should help us in our first steps of using Sanyo PLC-XE34
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo PLC-XE34
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo PLC-XE34 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo PLC-XE34?

Use the form below

If you did not solve your problem by using a manual Sanyo PLC-XE34, ask a question using the form below. If a user had a similar problem with Sanyo PLC-XE34 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)