English dropdown-ico

Manual Smeg Built-in Hob SE435XT

12 pages 0.09 mb
Download

Go to site of 12

Summary
  • Smeg Built-in Hob SE435XT - page 1

    Dear Customer, Thank you for having purchased one of our products. We are certain that this new, modern, functional and practical appliance, built with the very highest quality materials, will meet your requirements in the best possible way. This hob is easy to use. It is, however, important to thoroughly read the instructions in this handbook in o ...

  • Smeg Built-in Hob SE435XT - page 2

    2 1 Normal plate Ø 145 of 1000 W 2 Normal plate Ø 180 of 1500 W 7 Control knob for electric plate n° 1 8 Control knob for electric plate n° 2 13 Warning light indicating that one or more plates are operating DESCRIPTION OF THE HOT PLATES TYPE: PAZ 04 ...

  • Smeg Built-in Hob SE435XT - page 3

    3 USE 1) SWITCHING ON THE ELECTRIC PLATES The hobs may be equipped with three types of electric plates: normal, thermostat and rapid plates indicated by a red mark. The normal plates and the rapid plates are controlled by a 7 - position switch (see fig. 1). The thermostat plates are controlled by 12 - position switch (see fig. 2). Switch on the pla ...

  • Smeg Built-in Hob SE435XT - page 4

    4 USE WARNINGS: When the plate is switched on for the first time, or if it has remained unused for a long period, it should be dried for 30 minutes on switch position n° 1. This will eliminate any moisture that may have been absorbed by the insulating material. To correctly use the appliance, remember: - To place a pan on the plate before switchin ...

  • Smeg Built-in Hob SE435XT - page 5

    5 CLEANING IMPORTANT: Always disconnect the appliance from the electricity main before carrying out any cleaning operation. 3) HOTPLATE If you want to preserve the surface clean and bright, periodically wash the hot plate with lukewarm soapy water. Following this, all parts should be thoroughly rinsed and dried. Never wash them while they are still ...

  • Smeg Built-in Hob SE435XT - page 6

    6 INSTALLATION Installation and maintenance must only be carried out by a qualified installer. Incorrect installation could cause damage to persons, animals and property for which the manufacturer cannot be held responsible. 4) INSTALLING THE HOT PLATE Check that the appliance is in a good condition after having removed the outer packaging and inte ...

  • Smeg Built-in Hob SE435XT - page 7

    7 INSTALLATION FIG. 8 6) ELECTRICAL CONNECTIONS Electrical connection must be carried out in compliance with the specifications and provisions in force. Before proceeding with the connections, check that: - The voltage rating of the appliance and the current sockets suits the maximum power draw of the appliance (see data label affixed to the lower ...

  • Smeg Built-in Hob SE435XT - page 8

    8 CONVERSIONS Disconnect the appliance from the mains supply prior to any conversions being carried out. 7) CHANGING THE TYPE OF POWER SUPPLY Although they leave our factory preset for single- phase connection, certain appliances may by converted to the threephase system. Comply with the following instructions: a) Remove the hotplate from the top o ...

  • Smeg Built-in Hob SE435XT - page 9

    9 SERVICING Always disconnect the appliance from the electricity main before proceeding with any servicing operation. 8) REPLACING THE ELECTRICAL COMPONENTS For access to the various parts, remove the hotplate from the top of the cabinet. Then overturn it, unscrew screw “Z” and remove under part. (see fig. 9). After these actions is possible to ...

  • Smeg Built-in Hob SE435XT - page 10

    VOLTAGE 110 V~ FREQUENCY 50/60 Hz TOT. RATING 5000 W MODEL WITH 4 NORMAL PLATES 10 TECHNICAL DATA ...

  • Smeg Built-in Hob SE435XT - page 11

    11 TECHNICAL ASSISTANCE AND SPARE PARTS This appliance, before leaving the factory, has been carefully tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention. ...

  • Smeg Built-in Hob SE435XT - page 12

    12 ...

Manufacturer Smeg Category Cooktop

Documents that we receive from a manufacturer of a Smeg Built-in Hob SE435XT can be divided into several groups. They are, among others:
- Smeg technical drawings
- Built-in Hob SE435XT manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg Built-in Hob SE435XT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg Built-in Hob SE435XT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg Built-in Hob SE435XT, service manual, brief instructions and user manuals Smeg Built-in Hob SE435XT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg Built-in Hob SE435XT.

Similar manuals

A complete manual for the device Smeg Built-in Hob SE435XT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg Built-in Hob SE435XT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg Built-in Hob SE435XT.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg Built-in Hob SE435XT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg Built-in Hob SE435XT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg Built-in Hob SE435XT, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg Built-in Hob SE435XT - which should help us in our first steps of using Smeg Built-in Hob SE435XT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg Built-in Hob SE435XT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg Built-in Hob SE435XT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg Built-in Hob SE435XT?

Use the form below

If you did not solve your problem by using a manual Smeg Built-in Hob SE435XT, ask a question using the form below. If a user had a similar problem with Smeg Built-in Hob SE435XT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)