-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 1
7.5x9-inch cover with bleed on 4 sides Enterasys Matrix ® DFE-Gold Series Hardware Installation Guide PoE Module 4G4285-49 PoE Module 4G4205-72 P/N 9034161-02 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 2
...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 3
i Notice Enterasys Networks reserv es the right to make changes in specif ications and othe r information contained in this document and its web si te without prior notice. The reader should in all cases consult Enterasys Netw ork ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 4
ii Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device co mplies with Par t 15 of the FCC rules. Operation is subject to the following two conditions: (1) this devic e may not cause harmfu l interference, ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 5
iii Electromagnetic Compatibility (EMC) This product complies with the following: 47 CF R Pa r t s 2 and 15, CSA C108.8, 2004/108/EC, EN 55022, EN 61000 ‐ 3 ‐ 2, EN 61000 ‐ 3 ‐ 3, EN 55024, AS/NZS CISPR 22, VCCI V ‐ 3. Compatibilida ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 6
iv Enterasys Customer Support at 353 61 705586 (Ireland). ѻ ѻ ક䇈ᯢк䰘ӊ Supplement to Product Instructions ᳝↦᳝ᆇ⠽䋼ܗ㋴ (Hazardous Substance) 䚼ӊৡ⿄ (Parts) 䪙 3E ∲ +J 䬝 &G ݁Ӌ䫀 &U ⒈㘨㣃 3%% ⒈Ѡ㣃䝮 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 7
v VCCI Notice This is a class A product based on the standard of the Vo l u n t a r y Control Co uncil for Interfe rence by Information Te c h n o l o g y Equipment (VCCI). If this equipmen t is used in a dome stic environment , ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 8
vi Safety Information Class 1 Laser Transceivers The single mode interf ace modules use Class 1 la ser transceivers. Read the followi ng safe ty information befor e installing or o perating these modules. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 9
vii ENTERASYS NETWORKS, INC. FIRMWARE LICENSE AGREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“ Agreement”) betwee n the end user (“Y ou”) and Enterasys Net works, Inc., on behalf of itsel ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 10
viii 3. APPLICABLE LAW. This Agreem ent shal l be interpreted and governed under the laws and in the state and federal cour ts of th e Commonwealth of Massachusetts without regard to its conflicts of laws provisions. You a ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 11
ix 8. AUDIT RIGHTS. You here by acknowled ge that the intell ectual property rights associated with the Program are of critical value to Enterasys, and, accordingly, You hereby agree to maintain complete books, records and account ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 12
x ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 13
xi Contents About This Guide Who Should Use This G uide .............. ................. ............ ................. ............. ................ ............ ....... ... xv How to Use This G uide ............. ................ ............. ............. ................ ............. ................ ..... ............. xvi Related Documents ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 14
xii Preparing to Install Module into Ma trix E7 or N7 Chassis ......... ............. ................ ............. ............... 3-7 Installing the DFE Modules into a Matrix E7 or N7 Chassis ...... ............. ............ ................. ........ 3-8 Installing the DFE Modules into Ma trix N3 or Matrix N5 Chas sis . .......... ............ ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 15
xiii Appendix C: About PoE (P ower over Ethernet) Overview ......... ............. ................ ............. ............. ................ ............. ............. ............ .............. ....... C-1 Proprietary PD Detection ............. ............. ............. ................ ............. ................ ............. ..... .. ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 16
xiv Tables 3-1 Contents of DFE Module Cart on ............ ................ ............. ............. ............. ................ ............ ... 3-2 4-1 LANVIEW LEDs ................... ................ ............. ............. ................ ............. ................ ...... ............ 4-4 4-2 Troubleshooting Checklist ... ... .. ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 17
Enterasys Matrix DFE-Gold Series PoE Hardware Installation Guide xv About This Guide This guide prov ides an over view , installati on and troubleshooting instructions, and specifications for the Enterasys Matr ix ® DFE ‐ Gold Series 4G4285 ‐ 49 and 4G4 205 ‐ 72 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 18
How to Use This Guide xvi About This Guide How to Use This Guide This preface pr ovides an overview of this guide and the DFE ‐ Gold Series manual set, and a brief summary of each chapter; de fines the conv entions used in this document; an ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 19
Conventions Used in This Guide Enterasys Matrix DFE-Gold Series PoE Hardware Installation Guide xvii Conventions Used in This Guide The following conventions are used in this guide: Lowercase x: Indicates the general use of an alphanumeric character (for example, 6x1xx, ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 20
Getting Help xviii About This Guide Getting Help For additional support related to the modules or this document, contact Enterasys Network s using one of the following methods: Before contacti ng Enterasys Networks for technical support, have the fol ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 21
Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 1-1 1 Introduction This chapter provides an overview of the DFE ‐ Gold Series module capab ilities, and introduces the 4 G4285 ‐ 49 and 4G4205 ‐ 72 DFE ‐ Gold Series PoE mod ules. Import an ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 22
Overview of DFE-Gold Series PoE Module Capabilitie s 1-2 Introduction Overview of DFE-Gold Series PoE Module Cap abilities The Gold Distributed Forwarding Engine (DFE) is Enterasys Networks’ next generation of enterp rise modules for the Matrix N ‐ Series and Matrix E7 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 23
DFE Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 1-3 DFE Modules This section provides an overview of the 4G4285 ‐ 49 ( Figure 1 ‐ 1 ) and 4G4205 ‐ 72 ( Figure 1 ‐ 2 ). For information about the DFE module features and how ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 24
DFE Modules 1-4 Introduction Figure 1- 1 4G4285-4 9 DFE-Gold Module 1 OFFLINE/RESET switch 7 GROUP ST A TUS LED s 2 RJ45 COM port 8 GROUP SELECT LEDs 3 MGMT LED 9 NEM option slot 4 CPU LED 10 48 Vdc ~ 20 A Max. Optional Power Input 5 PoE LED connector 6 GROUP SELECT switch 11 Ports (1-48), 10/100/1000 Mbps, through RJ45s ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 25
DFE Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 1-5 4G4205-72 The 4G4205 ‐ 72 has 72, 10BASE ‐ T/10 0BASE ‐ TX/1000BASE ‐ T, Po E ‐ compliant ports that are accessed through the fixed front panel RJ45 connectors. The DFE module ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 26
DFE Modules 1-6 Introduction Figure 1-2 4G4205-72 DFE-Gold Module 1 OFFLINE/RESET switch 6 GROUP LEDs 2 RJ45 COM port 7 GROUP SELECT button 3 CPU LED 8 GROUP status LEDs 4 MGMT LED 9 Groups 1&2, 40 ports, 10/100/1000 Mbps 5 Group 3, 20 ports, 10/100/1000 Mbps Â Ã Ä Å Æ Á À È Ç COM OFFLINE / RESET CPU MGMT GROUP SELECT GROUP 1 GROUP 2 1 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 27
Network Expansion Module (NEM) Option Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 1-7 Network Exp ansion Module (NEM) Option The 4G4285 ‐ 49 option slot provides access to an installed netw ork expansion module. Refer to the Enterasys Networks web sit ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 28
Secure Networks Policy Support 1-8 Introduction Switch Configuration Using CLI Commands The CLI commands enable you to perform more complete switch configuration management tasks. For CLI command set information and how to configure the module, refer to ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 29
LANVIEW Diagnostic LEDs Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 1-9 LANVIEW Diagnostic LEDs LANVIEW diagnostic LEDs serv e as an important troubleshooting aid by providing an easy wa y to observe the status of in dividual ports and ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 30
LANVIEW Diagnostic LEDs 1-10 Introduction ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 31
Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 2-1 2 Network Requirements Before inst alling the module, re view the requirements and specificat ions referred to in this chapter . The network install ation must meet the requireme nts detailed ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 32
Link Aggregation 2-2 Network Requirements Link Aggregation Link Aggregation is a method of grouping multiple physical ports on a network device into one logical link according to the IEEE 802.3ad ‐ 2002 standard. Because Link Aggregation is ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 33
10BASE-T Network Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 2-3 10BASE-T Network When connecting a 10BASE ‐ T segment to any of the RJ45 fixed front ‐ panel ports of the 4G4285 ‐ 49 or 4G420 5 ‐ 72, ensure that the ne twork ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 34
1000BASE-T Network 2-4 Network Requirements ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 35
Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 3-1 3 Installation This chapter provides the instructions to install the 4G4285 ‐ 49 and 4G4205 ‐ 72 DFE modules. Follow the order of the sections listed below to correctly install ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 36
Installation Site Requirement 3-2 Installation Inst allation Site Requirement The DFE module must be ins talled in a Matrix E7, N3 , N5, or N7 chassis located in a Restricted Access Location (RAL). This location should only be accessible ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 37
Installing Optional Network Expansion Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 3-3 Inst alling Optional Network Exp ansion Modules A Phillips screwdriver is required to install an optional netw ork expansio n module into the 4G4285 ‐ 49. Refer ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 38
DFE Module Placement and Installation Rules 3-4 Installation Figure 3-1 Examples, Slot Numbers/M odule Placement in Ma trix E7 Chassis To ensure proper operation of the system, consider the following examples and rules for module placement in either chassis. Example 1 ( Figure ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 39
Installing the DFE Module into a Chassis Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 3-5 Example 3 ( Figure 3-1 , C) Shows the primary management module missing from slot 1. As long as the module installed in slot 2 is designated as a ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 40
Installing the DFE Module into a Chassis 3-6 Installation Prep aration 1. Remove the blank pa nel cov ering the slot in which the module will be ins talled. All other slots must remain cov ered to ensure proper airflow for cooling. (Save the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 41
Preparing to Install Module into Matrix E7 or N7 Ch assis Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 3-7 3. Slide the module into the slot unt il yo u can engage the top and bottom lock ing levers with the chassis as shown in Figure ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 42
Preparing to Install Module in to Matrix E7 or N7 Chassis 3-8 Installation To install a DFE module into a Ma trix E7 or Matrix N7 chassis, proceed as follows to prepare the module for installation. 1. Remove the blank pa nel cov ering the slot in whi ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 43
Preparing to Install Module into Matrix E7 or N7 Ch assis Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 3-9 3. Align the module card between the upper and lower card guides of the desired slot and sl ide it into the chassis, taking car ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 44
Preparing to Install Module in to Matrix E7 or N7 Chassis 3-10 Installation Figure 3-2 Installing Module into Matr ix E7 or Matr ix N7 Chassis (E7 shown) 1 Card guides 7 Backplane connectors 2 Slot number 6 (Left-most slot is 1) • T op two connectors (power an d FTM2 3 Module card • Bottom two connectors (power and FT M1) 4 Metal back panel (no ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 45
Preparing to Install Module into Matrix E7 or N7 Ch assis Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-11 Inst alling the DFE Modules into Ma trix N3 or Matrix N5 Chassis A DFE module can be ins talled in any av ailable N3 chassis slot (1 thro ugh 3) or N5 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 46
Preparing to Install Module in to Matrix E7 or N7 Chassis 3-12 Installation 4. Slide the module into the slot unt il yo u can engage the top and bottom lock ing levers. 5. Refer to the Caution note above, then rotate the tw o lever s into the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 47
Connecting 48 Vdc Power for PoE Operation Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-13 Connecting 48 Vdc Power for PoE Operation The Matr ix N5 (7C105 ‐ P) chassis provides 48 Vdc to connecte d PDs (pow ered devices ) by wa y of its backplane conne ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 48
Connecting to the Network 3-14 Installation Connecting to the Network This section provides the procedures for connecting unshielded twisted pair (UTP) segments from the network or other devices to the 4G4285 ‐ 49 and 4G4205 ‐ 72 (“ Connecting UTP ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 49
Connecting to the Network Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-15 The RJ45 fi xed front panel connectors of the 4G4285 ‐ 49 and 4G4205 ‐ 72 also support Po E ‐ compliant connections to PDs (powered devi ces) that require 48 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 50
Connecting to the Network 3-16 Installation 3. V erify that a link exists by ch ecki ng that the port RX (Receive) LED is ON (flashing amber , blinking green, or solid green). If the RX LED is OFF and the TX (T ransmit) LE ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 51
Connecting to the Network Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-17 Figure 3-5 Four-Wire Crossover Cable RJ45 Pinout s, Connections Between Hub Devices Figure 3-6 Four-Wire Straig ht-Through Cable RJ45 Pinout s, Connections Between Switches and End User Devices 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 O ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 52
Connecting to the Network 3-18 Installation Figure 3-7 Eight-Wire Crossover Cable RJ45 Pinouts , Connections Between Hub Devices 1 RJ45 device port 3 RJ45-to-RJ45 crossover cable 2 Other device port 2 1 3 6 4 5 7 8 TX1+ TX2+ RX4- RX1- TX4+ RX3- TX3+ RX2- TX2+ TX1+ RX3- RX2- TX3+ RX4- TX4+ RX1- 2 1 3 6 4 5 7 8 Â Á À ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 53
Connecting to the Network Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-19 Figure 3-8 Eight-Wire St raight-Throu gh Cable RJ45 Pinout s, Connections Between Switches and End User Devices f. Ensure that the twisted pai r connection meets the dB loss and cable specifications ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 54
Connecting to COM Port for Local Management 3-20 Installation 2. Now , every ti me yo u press the GROUP SELECT switch for less than a second, the GROUP LED lights up in sequence, indicating which group is selected. The Po E POWER ST A ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 55
Connecting to COM Port for Local Management Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-21 Connecting to an IBM PC or Comp atible Device To connect an IBM PC or compatible device, running the VT terminal emulation, to an Enterasys Network s module COM ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 56
Connecting to COM Port for Local Management 3-22 Installation Connecting to a VT Series T erminal To connect a VT Series terminal to an Enterasys Networks DFE module COM port ( Figure 3 ‐ 10 ), use a UTP straight ‐ through cable with RJ 45 connectors and ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 57
Connecting to COM Port for Local Management Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-23 Connecting to a Modem To connect a modem to an Enterasys Networks DFE module COM port ( Figure 3 ‐ 11 ), use a UTP straig ht ‐ through cable with RJ45 ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 58
Connecting to COM Port for Local Management 3-24 Installation Figure 3-1 1 Connecting to a Modem Adapter Wiring and Signal Assignment s 1 UTP straight-through cable with RJ45 connectors 4 Local modem 2 RJ45 COM port 5 Remote modem 3 RJ45-to-DB25 modem adapter 6 PC CPU POE 1X G R O U P 1 OFFLINE/ RESET COM MGMT GROUP SELECT GROUP 1 2 3 4 5 6 1 2 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 59
Connecting to COM Port for Local Management Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-25 VT Series Port Adapter W iring and Signal Diagram RJ45 DB25 Pin Conductor Pin Signal 4 Red 2 T ransmit (TX) 1 Blue 3 Receive (RX) 6 Y ellow 5 Clear to Send (CTS) 5 Green 7 Ground (GRD) 2 Orange 20 Data T erminal Ready Modem Port ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 60
Completing the Installation 3-26 Installation Completing the Inst allation Completing the DFE module ins tallation depends on whether the module is being installed in •a new DFE module sy stem (refer to “ Comp letin g the Installat ion of a New ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 61
Completing the Installation Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 3-27 The DFE module is now ready to be configured. For information about setting the IP address and configuring Te l n e t settings for remote access to D ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 62
Completing the Installation 3-28 Installation Completing the Inst allation of a DFE Module in an Existing System In an established DFE module system , •a DFE module is already established as the management module, •t h e passwords have already been set for var i ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 63
Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 4-1 4 T roubleshooting This chapter provides information concerning the following: Using LANVIEW DFE modules use a built ‐ in visual diagnostic and status monitoring system called LANVIEW . The L ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 64
Using LANVIEW 4-2 Troubleshooting V iewing Receive/T ransmit Activity on 4G4285-49 Yo u can view the 4G4285 ‐ 49 receiv e and transmit port activity on the RX and TX LEDs. Howev er , only one group of 12 ports may be view ed at a time. ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 65
Using LANVIEW Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 4-3 V iewing Receive/T ransmit Activity on 4G4205-72 On the 4G4205 ‐ 72, you can view the receiv e and transmit activity on the RX and TX LEDs. Howev er , only one group of ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 66
Using LANVIEW 4-4 Troubleshooting V iewing the PoE Port St atus If the 4G4285 ‐ 49 or 4G4205 ‐ 72 is installed in an N5 chassis or if the 4G4285 ‐ 49 is receiving 48 Vdc from an external N ‐ POE Pow e r System, you can view the ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 67
Using LANVIEW Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 4-5 CPU Off Power off. Ensure chassis has adequ ate power . Amber Blinking . DFE module in process of booti ng. None. Solid . T esting. If the LED remains amber for several minutes, contact Enterasys Networks for technical support. Green Blinking . Image st arts ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 68
Using LANVIEW 4-6 Troubleshooting TX (T ransmit) Off Port enabled, but no activity . If it is known that the port should be active and is not, contact Enterasys Networks for technical support. Green Flashing . Indicates data transmission activity . Rate of flashing indicates the data rate. None. Red Flashing . F ault or Error (collision). None, unl ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 69
Using LANVIEW Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 4-7 RX/TX (cont.) Off/Of f Port is off for other reason. 1. There is n o connection to a PD. 2. If the DFE module is in an N5 chassis, ensure that the N5 is turned on. 3. If connected to an N-POE Power System, ensure that it is turned on. 4. If the power is being ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 70
Troubleshooting Checklist 4-8 Troubleshooting T roubleshooting Checklist If the module is not wor ki ng properly , refer to Ta b l e 4 ‐ 2 on page 4 ‐ 8 for a checklist of problems, possible causes, and recommended actions to resolve the problem. ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 71
Troubleshooting Checklist Enterasys Matrix DFE-Gold Series PoE Module Hardware Insta llation Guide 4-9 Cannot contact the module through in- band manageme nt. IP address not assigned. Refer to the Enterasys Matrix DFE-Gold Series Configuration Guide for the IP address assignment procedure. Port is disab led. Enable port. Refer to the Enterasys Matr ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 72
Overview of DFE Module Shutdown Procedure 4-10 Troubleshooting Overview of DFE Module Shut down Procedure The DFE mo dule s installed in a Matr ix E7, Matrix N3, Matri x N5 , or Matrix N7 chassis are interdependent and operate under a single IP address ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 73
Overview of DFE Module Shutdown Procedure Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 4-11 Figure 4-3 OFFLINE/RESET Switch Recommended Shut down Procedure Using OFFLINE/RESET Switch Before pulling a DFE module out of a chassis, press or tap on its OFFLINE /RESET ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 74
Overview of DFE Module Shutdown Procedure 4-12 Troubleshooting Last Resort Shut down Proced ure Using OFFLINE/RESET Switch To reset a DFE module without it performing an orderly shutdown routine, press and hold the OFFLINE/RESET switch for approximately 6 seconds. P ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 75
Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide A-1 A Specifications This appendix provides information about the f ollowing: Enterasys Network s res erves the right to change the specifications at any time without notice. For information about... Refer ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 76
DFE Module Specifications A-2 Specifications DFE Module S pecifications Ta b l e A ‐ 1 provides the Input/Output ports, processors and memory , physical, and environmental modul e specific ations for the 4G4285 ‐ 49 DFE module. Ta b l e A ‐ 2 provides the same ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 77
DFE Module Specifications Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide A-3 T able A-2 4G4205-72 S pecifications Item S pecification Ports 1 through 72 Seventy-two, 10BASE-T/100BASE-TX /1000BASE-T ports by way of RJ45 connectors. T hese ports also support PoE operation. Option Slot Supports one optional NEM. Optional ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 78
COM Port Pinout Assignments A-4 Specifications COM Port Pinout Assignment s The COM port is a serial communications port for loc al access to Local Management. Refer to Ta b l e A ‐ 3 for the COM port pin assignments. Regulatory Compliance The 4G4285 ‐ 4 ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 79
Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide B-1 B Mode Switch Settings and Option Installations This appendix covers the following items: Required T ools Use the following tools to perform the procedures provided in this appendix: •A n t i s t a t i c ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 80
Setting the Mode Switches B-2 Mode Switch Settings and Option Installations Setting the Mode Switches Figure B ‐ 1 shows the location of the mode switches and the switch settings for nor mal operation. These switches are set at the factory and rarel y ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 81
Memory Locations and Replacement Procedures Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide B-3 Figure B-1 Mode Switch Location (4G4285- 49 shown without safety cover) Memory Locations and Replacement Procedures If the Dual in Line Memory Module (DIMM) or DRAM Single In ‐ line ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 82
Memory Locations and Replacement Procedures B-4 Mode Switch Settings and Option Installations Figure B-2 DIMM and DRAM SIMM Locations (4G4285-49 shown withou t safety cover) 1 DRAM SIMM 2 DIMM 3 Main PC board ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 83
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide B-5 Gaining Access to Memory Modules Before you can replace the DRAM SIMM, you must gain access to it by removing the safety cover and the network expansion ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 84
Gaining Access to Memory Modules B-6 Mode Switch Settings and Option Installations Figure B-3 Removing the Safety Cover 1 Safety cover 3 S tandoffs (7) 2 Cover screws (7) 4 S tandof f/spacer screwed to standoff under the interface board ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 85
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide B-7 DRAM SIMM Replacement Procedure After you have removed the safety cov er as described in “ Removing the Safety Cov er ” on page B ‐ 5, proceed to “ Removing ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 86
Gaining Access to Memory Modules B-8 Mode Switch Settings and Option Installations Figure B-4 Removing the Network Expa nsion Module (NEM ) 2. Remove the tw o screws fastening the NEM to the DFE module front panel and remove th e standoff fastening the NEM to the ma ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 87
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Modu le Hardware Installation Guide B-9 Removing the DRAM SIMM To remove the DRAM SI MM, refer to Figure B ‐ 5 and proceed as follows. 1. Refer to Figure B ‐ 5 . Push the con nector arms aw ay from ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 88
Gaining Access to Memory Modules B-10 Mode Switch Settings and Option Installations 3. Reinstall the NEM. Refer to “ Installing the Network Expansion Module (NEM ) ” on page B ‐ 12 for instructions. 4. Reinstall the safety cover . Refer to “ Reinstalling the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 89
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Gu ide B-11 2. Locate the DIMM connector on the main PC board . Refer back to Figure B ‐ 2 for the DIMM location on the DFE module. 3. Push the connector ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 90
Gaining Access to Memory Modules B-12 Mode Switch Settings and Option Installations Figure B-8 I nst alling the DIMM Inst alling the Network Ex p ansion Module (NEM) Refer to Figure B ‐ 9 and proceed as follows: 1. P osition the NEM so its front panel is under the edge of the ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 91
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Gu ide B-13 Figure B-9 In st alling the Network Expansion Module 3. Use two of the saved cov erplate screws to fasten the NE M to the DFE module front panel, but do not tighte ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 92
Gaining Access to Memory Modules B-14 Mode Switch Settings and Option Installations Reinst alling the Safety Cover To install the safety cover , refer to Figure B ‐ 10 and proceed as follows: 1. Locate the seven screw s saved in the procedure “ Removi ng the Saf ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 93
Gaining Access to Memory Modules Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Gu ide B-15 Figure B-10 Installing the Saf ety Cover 1 Safety cover 2 Screws (7) 3 S tandoff (7) ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 94
Gaining Access to Memory Modules B-16 Mode Switch Settings and Option Installations ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 95
Enterasys Matrix DFE-Gold Ser ies PoE Module Hardware Installation Guide C-1 C About PoE (Power over Ethernet) This appendix provides an overview of Pow e r ov er Ethernet T echnology and how it is implemented in relation to the 4G4285 ‐ 49 and 4G4205 ‐ 72 D ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 96
Overview C-2 About PoE (Power over Ethernet) Propriet ary PD Detection The 4G4285 ‐ 49 and 4G4205 ‐ 72 support a subs et of the currently deploy ed proprietary Po E methods. This includes support for Cisco PDs, including a proprietary capacitor based ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 97
Overview Enterasys Matrix DFE-Gold Ser ies PoE Module Hardware Installation Guide C-3 Front Panel 48 Vdc Interface The 48 Vdc Optional Pow e r Input connector on the 4G4285 ‐ 49 front pan el provides a power interface connection for an Enterasys Matrix N ‐ POE ? ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 98
Overview C-4 About PoE (Power over Ethernet) ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 99
Index-1 Index Numerics 1000BASE-T requirements 2-3 100BASE-TX requirements 2-3 10BASE-T connection 3-14 requirements 2-3 4G4205-72 introduction to 1-5 , 1-6 specifications for A-3 4G4285-49 introduction to 1-3 , 1-4 specifications for A-2 C Cable connections 4G4205-72 3-14 4G4282-49 3-14 UTP 3-14 Cable specifications 1000BASE-T network 2-3 100BASE- ...
-
Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 - page 100
Index-2 Memory locations DIMM and SIMM B-3 Mode Switch setting of B-2 Module coverplate removal of B-7 Module features 1-3 , 1-5 N NEM option 1-7 Network connecting to 3-14 Network expansion module installation of B-12 Network expansion module option 1-7 Network Requirements list of 2-1 O Offline/reset switch use of 4-1 1 Optional n etwork expansio ...
Do you have a question concerning Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72?
Use the form below
If you did not solve your problem by using a manual Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72, ask a question using the form below. If a user had a similar problem with Enterasys Enterasys Gold Distributed Forwarding Engine 4G4205-72 it is likely that he will want to share the way to solve it.