English dropdown-ico

Manual Lanier IS100e

96 pages 0.97 mb
Download

Go to site of 96

Summary
  • Lanier IS100e - page 1

    y our doc ument ma nage ment pa r tner Operator Manual IS100e IS100e IS100e IS100e Operator Guide ...

  • Lanier IS100e - page 2

    ...

  • Lanier IS100e - page 3

    i Safety Information When using this equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: Indicates potentially hazardous situations, which if instruct ions are not followed, could result in death or serious injury. Indicates a potentially hazardous ...

  • Lanier IS100e - page 4

    ii Precautions Do not install the equipment near heating or air conditioning units. Do not install the equipment in a humid or dusty place . Be sure to use the proper AC power source. Place the equipment securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper - feeding problems. Retain the box and packing material ...

  • Lanier IS100e - page 5

    iii Notice Important Do n ot make copies of any item for which copying is prohibited by law. Copying the following items are normally prohibited by the local law: Bank bills, revenue stamps, bonds, stock certificates, bank drafts, checks, pass - ports, driver's licenses. This machine is equipped with a function that prevents making counterfeit ...

  • Lanier IS100e - page 6

    iv Warranty The information contained in this document(s) is subject to change without notice. The manufacturer makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose. The manufacturer shall not be liable for errors contained herein or for incidental or c ...

  • Lanier IS100e - page 7

    v Table of Contents 1 Getting Started ............................................................................................... 1 - 1 Introduction ......................................................................................................... 1 - 1 Features ............................................................................ ...

  • Lanier IS100e - page 8

    vi To Administer th e setting screen via the LCD - display ............................................. 3 - 1 To Administer IMAGE SCANNER IS100e’s Web Page .......................................... 3 - 3 Summary of Administrator Activities ...................................................................... 3 - 4 4 Managing the Address Book . ...

  • Lanier IS100e - page 9

    vii Sending E - mails .................................................................................................. 6 - 5 Making Copy ....................................................................................................... 6 - 8 Before making copy .................................................................................. ...

  • Lanier IS100e - page 10

    viii ...

  • Lanier IS100e - page 11

    Getting Starte d 1 - 1 1 Getting Started Introduction Thank you for purchasing our IMAGE SCANNER IS100e, an internet appliance. IMAGE SCANNER IS100e offer s an unprecedented document delive ry technology , transmit ting paper documents electronically over the internet and intranet. With IMAGE SCANNER IS100e, you have power to instantly send your bu ...

  • Lanier IS100e - page 12

    Getting Started 1 - 2 Features E - mail Forwarding : C onnected to an Ethernet network and a SMTP server, IMAGE SCANNER IS100e allows you to transmit document(s) over the internet via e - mail. With a touch of the e - mail key and the selection of your recipients' e - mail addresses, t he docume nt(s) is/are first scanned and converted into an ...

  • Lanier IS100e - page 13

    Getting Starte d 1 - 3 External View THE FRONT VIEW 1. ADF Front Cover 4. ADF Paper Support 2. LCD - display 5. Document(s) Cover 3. ADF Paper Tray 6. Control Panel 4 1 3 5 6 2 ...

  • Lanier IS100e - page 14

    Getting Started 1 - 4 THE REAR VIEW 1. Paper Feed Tray 6. Power Jack 2. ADF Cable 7. ADF Port 3. Keyboard Port 8 . Printer Port 4. RJ - 45 Network Port 5. Power Switch 5 6 7 8 3 4 1 2 ...

  • Lanier IS100e - page 15

    Getting Starte d 1 - 5 Control Panel Part A: Scaling Area: Used to reduce document(s) down to 25% or enlarge it up to 400%. 3 1 2 1. Increase scaling in 1% increment 2. Decrease scaling in 1% De crement 3. Select scaling from the preset percentage Part A Part B Part C Part D ( 155 %) ( 129 %) ( 121 %) ( 78 %) ( 65 %) (93%) ...

  • Lanier IS100e - page 16

    Getting Started 1 - 6 Part B: LCD - display & Function Keys: Used to display current opera tion and select key working mode. Function Keys and others: Press to use the Copy function. Press to use the e - mail function. Press to use the filing function. Press to select an e - mail address from an address book or folder name from a fol der book. ...

  • Lanier IS100e - page 17

    Getting Started 1 - 7 Part C: The Numeric/Character Keypad: Used to enter the network p arameters or copy page number. Part D: Start & Other Keys: Used to select scanning resolution and start sending or copying document(s). Used to stop sending process or clear previous operation. Stands for Super Fine. Used to enhance scanning res olution. Use ...

  • Lanier IS100e - page 18

    Getting Started 1 - 8 Pre Installation Information IMAGE SCANNER IS100e has to be setup properly on your network to perform e - mail and filing functions. The following network parameters have to be set. For required information and LAN connection , please contact your network administrator. Important ! Make a copy of the following table and ask yo ...

  • Lanier IS100e - page 19

    Getting Starte d 1 - 9 Explanation of contents: 1. * IP Address: The Internet Protocol (IP) address assigned to your machine by your network administrator . 2. Subn et Mask: The net mask address assigned by your network administrator. 3. Gateway IP: The gateway IP address assigned by your network administrator. 4.DNS Server The IP address of DNS Se ...

  • Lanier IS100e - page 20

    Getting Started 1 - 10 Internet Communication Features E - MAIL FORWARDING IMAGE SCANNER IS100e allows you to transmit document(s) over the Internet via e - mail. The document is first scanned and converted into a jp eg - formatted or a pdf - formatted file, and then transmitted to a remote recipient as an attachment to an e - mail. When you send a ...

  • Lanier IS100e - page 21

    Getting Starte d 1 - 11 FILING DOCUMENT TO A SERVER Filing document over intranet: Through the intranet with FTP, HTTP, CIFS, or AVPP protocol, IMAGE SCANNER IS100e allows you to put document directly to a designated server or personal computer’s file folder in one of these compressed formats, pdf, tiff, and jpeg. CIFS is the sharing system of Mi ...

  • Lanier IS100e - page 22

    Getting Started 1 - 12 ...

  • Lanier IS100e - page 23

    Setting up Your Machine 2 - 1 2 Setting up Your Machine Minimum Configuration Re quirements To make the best of IMAGE SCANNER IS100e, the following configuration is required: To send e - mails from IMAGE SCANNER IS100e: • TCP/IP network • A SMTP server To file document(s) via intranet • FTP, HTTP, CIFS, or AVPP Pro tocol environment • Windo ...

  • Lanier IS100e - page 24

    Setting up Your Machine 2 - 2 Checking Package Contents Unpack the box and check its components. If there is any item missing, contact your dealer immediately. 1. Paper Feed Tray 8. ADF Pad 2. Paper Support 9. Keyboard 3. I S100e Main Body 10. Printer Cable 4. Paper Stopper 5. User’s Manual, Quick Guide , CD - ROM 6. Power Adapter 7. Power Cord 4 ...

  • Lanier IS100e - page 25

    Setting up Your Machine 2 - 3 Unlocking the Scan Unit The scan unit is locked during transport to protect the scanning mechanism from being damaged. Be sure to unlock the scan unit before using the machine. 1). Locate the lock switch underneath the machine. 2). Move the lock switch to the " unlocked position " . Note: If you need to move ...

  • Lanier IS100e - page 26

    Setting up Your Machine 2 - 4 Installing the Paper Feed Tray 1). Attach the Paper Support to the Paper Feed Tray. 2). Then, attach the Paper Feed Tray to the machine. Paper Support Paper Feed Tray ...

  • Lanier IS100e - page 27

    Setting up Your Machine 2 - 5 Connecting the Cables CONNECTING THE ETHER NET CABLE 1. Connect one end of you r Ethernet LAN cable to an available port of your Ethernet Hub . 2. Connect the other end to the network port at the back of your IMAGE SCANNER IS100e. CONNECTING THE KEYBO ARD CABLE 1. Connect the cable of the keyboard t o the PS2 port at t ...

  • Lanier IS100e - page 28

    Setting up Your Machine 2 - 6 CONNECTING THE PRINT ER CABLE 1. Connect one end of the printer cable to your printer. 2. Connect the other end to the printer port of your IMAGE SCANNER IS100e. CONNECTING THE ADF C ABLE Connect the ADF (Auto Document Feeder) cable (attached to the document(s) cover) to the ADF port at the back of IMAGE SCANNER IS100e ...

  • Lanier IS100e - page 29

    Setting up Your Machine 2 - 7 3. Connect the other end to an appropriate power outlet. 4. Press the power switch to the "I" position to turn on your IMAGE SCANNER IS100e. After showing the warming up message, the LCD display prompts the Copy ready status (present) as shown below. Note : You can leave your IMAGE SCANNER IS100e ON at all ti ...

  • Lanier IS100e - page 30

    Setting up Your Machine 2 - 8 Setting up Your Network Parameters Before using IMAGE SCANNER IS100e, please setup IMAGE SCANNER IS100e properly on your network t o perform e - mail and filing functions. The following network parameters have to be set. For required information and LAN connection , please contact your network administrator. To set up ...

  • Lanier IS100e - page 31

    Setting up Your Machine 2 - 9 Note: 1. *NTP Server: Stands for Network Time Protocol . To set the correct clock on IMAGE SCANNER IS100e, it is recommended to fill in the IP address of your NTP server. 2. To set the clock for IMAGE SCANNER IS100e, in addition to entering the IP address of the NTP server, you are requested to choose the app ropriate ...

  • Lanier IS100e - page 32

    Setting up Your Machine 2 - 10 ...

  • Lanier IS100e - page 33

    Administration 3 - 1 3 Administration This chapter describes how to perform the administrator activities either on the control panel or on IMAGE SCANNER IS100e web page . The access to the administrator activities (Network Configuration and Administrator) is blocked by the administrator password. It is recommended that an administrator create a pas ...

  • Lanier IS100e - page 34

    Administration 3 - 2 2. Use the “up” key or the “down” key to move between the menus. Use the “ OK ” key to enter e a ch menu. To exit from the menu, use the “ Cancel ” key. Press Save&Exit to save the changes and exit from the menu. 3. For the con tents of each menu, please see the subsequent section, Summary of Administrator A ...

  • Lanier IS100e - page 35

    Administration 3 - 3 To Administer IMAGE SCANNER IS100e’s Web Page Network P a rameters which you consulted on page 2 - 8 must have been set before administe r IMAGE SCANNER IS100e's Web Page. 1. Start your browser, either I.E or Netscape . Both I.E. and Netscape must be 4.0 or higher. 2. Type the IP address of your IMAGE SCANNER IS100e in t ...

  • Lanier IS100e - page 36

    Administration 3 - 4 Summary of Administrator Activities Activities Description Menu General Device Name Displays the model name. Date/Time Current date and time. Time Zone Based on Greenwich Mean Time (GMT). Network Configuration IP Address IP address of your IMAGE SCANNER IS100e. Subnet Mask The IP address of your subnet mask. Gateway IP The IP a ...

  • Lanier IS100e - page 37

    Administration 3 - 5 Activities Description Menu Document Type The contents for your document. Choice: Text and Photo Compression The compression level for the d ocuments you send from IMAGE SCANNER IS100e. Choice: Low, Medium, and High Enable Background Removal Remove the scanned image background Filing Default File Name The file name for filing a ...

  • Lanier IS100e - page 38

    Administration 3 - 6 Activities Description Menu Function Buttons Button #1~6 Setting up the most frequently used messages of Homepage (with the use of the function key s Fn#1 - 6 on the keyboard packaged along with the machine) Choice : Copy , E - mail , and Filing Administrator Admin. Login Name Logging in the administrator’s name on IMAGE SCAN ...

  • Lanier IS100e - page 39

    Administration 3 - 7 Activities Description Menu Logon Mail server E -m ail Function for IMAG E SCANNER IS100e. The authentication method (NO, SMTP or POP3) set up in IMAGE SCANNER IS100e administrator e - m ail system can cooperate with the e - mail server utilizing SMTP or POP3 to convey messages. Note: It is needed to set the IP address on the d ...

  • Lanier IS100e - page 40

    Administration 3 - 8 Activities Description Menu A dd "To" Address After Sending If “Yes” is selected , when finishing sending E - mail, there will be a conversation window inquiring whether user wishe s to add the new e - mail address to IMAGE SCANNER IS100e’s address book. Choice : Yes , No Add New Folder After Filing If “Yes” ...

  • Lanier IS100e - page 41

    Managing the Address Book 4 - 1 4 Managing the Address Book Our Java - Manager is a convenient browser - based tool to manage the address book of IMAGE SCANNER IS100e remotely. Since only the administrator can manage the address book, it is highly recommended that the administrator read this chapter before using IMAGE SCANNER IS100e. Managing Your ...

  • Lanier IS100e - page 42

    Managing the Address Book 4 - 2 3 . Pr ess the Administrator button to prompt the Login dialog. 4 . Enter the name and password of the administrator and press the "Submit" button. The Administrator screen appears. 5 . Press " @ ddress" to prompt the Address Book dialog. 6 . Press the E - mail icon and choose Add to prompt the Ad ...

  • Lanier IS100e - page 43

    Managing the Address Book 4 - 3 7 . Enter a local user's name, password, and e - mail address, and click Continue for the next input or Finish to temporarily save the latest data and return to the main screen. 8 . Clic k Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. ...

  • Lanier IS100e - page 44

    Managing the Address Book 4 - 4 MODIFYING E - MAIL ADD RESSES To modify e - mail addresses, 1. Repeat Step 1 to Step 5 from the pre vious section, Adding E - mail Addresses . The Address book dialog appears. 2. Click the E - mail icon and choose the address you want to modify from the list. A Modify E - mail address dialog appears. 3. Modify your a ...

  • Lanier IS100e - page 45

    Managing the Address Book 4 - 5 DELETING E - MAIL ADDR ESSES To delete e - mail add resses, 1 . Repeat Step 1 to Step 5 from the previous section, Adding An E - mail Address . The Address Book dialog appears. 2 . Click the E - mail icon on the top and choose the address es you want to delete from the list. 3. Click Delete to erase the address. A wa ...

  • Lanier IS100e - page 46

    Managing the Address Book 4 - 6 Managing Your Groups ADDING NEW GROUPS To add new groups, 1. Repeat Step 1 to Step 5 from the previous section, Adding An E - mail Address . The Address book dialog a ppears. 2. Click the Group icon and choose Add to prompt the Add A New Group dialog. 3. Enter your group name. 4. Choose the address from the right sid ...

  • Lanier IS100e - page 47

    Managing the Address Book 4 - 7 MODIFYING GROUPS To modify groups, 1. Repeat S tep 1 to Step 5 from the previous section, Adding An E - mail Address . The Address book dialog appears. 2. Click the Group icon on the top and choose Modify to display the Modify A Group Set dialog. 3. Choose one member you want to delete from the grou p and click the ? ...

  • Lanier IS100e - page 48

    Managing the Address Book 4 - 8 DELETING GROUPS To delete groups, 1. Repeat Step 1 to Step 5 from the previous section, Adding An E - mail Addres s . The Address Book dialog appears. 2. Click the Group icon and choose the group name you want to delete from the list. 3. Click Delete to erase the number. A warning message appears to confirm your dele ...

  • Lanier IS100e - page 49

    Managing Filing Folders 5 - 1 5 Managing Filing Folders Settings on the Server FTP FTP use s R FC 959[FTP] as its protocol. Therefore, please make sure you have legal FTP account with the privilege of writing under the directory to save the files and the password before using FTP to save the files. To add a sub - directory from IMAGE SCANNER IS100e ...

  • Lanier IS100e - page 50

    Managing Filing Folders 5 - 2 On the other hand, if IIS or HTTP server does not allow anonymous account for authentication connecting to the web page, the user will be prompted to enter the user name and password first while connecting to the web site. In this mode, the file saving feature is available only when entering the user name and password ...

  • Lanier IS100e - page 51

    Managing Filing Folders 5 - 3 Note: 1. Please note that HTTP and AVPP cannot add server sub - directory from IMAGE SCANNER IS100e. 2. When using Apache as HT TP server, according to the document, it must have SCRIPT to run HTTP PUT method. Although the document is attached with a Perl for example, you will need to modify it before applying it , sin ...

  • Lanier IS100e - page 52

    Managing Filing Folders 5 - 4 Note: Windows NT can use local account as files saving account only. If adding a Windows NT domain, the domain account is not suitable as files saving account. Below is the Win dows 98 CIFS server sharing set up screen for your reference. Click Sharing As Select Full Root directory on the server Enter your password ...

  • Lanier IS100e - page 53

    Managing Filing Folders 5 - 5 Filing Terminology Folder Name: Name a folder to hold all set - up information. (Note: The folder names cannot be repeated.) Protocol: includes FTP, HTTP, AVPP, and CIFS . Server IP : the IP address of a server. Directory: The path name on Filing Server for sav ing image files. Please be noted that the directory settin ...

  • Lanier IS100e - page 54

    Managing Filing Folders 5 - 6 Adding a Filing Folder with the Control Panel 1 . Press the “ Filing ” key and the “ A ddress Bo ok/Folders ” key, and then select <NEW FOLDER> to generate a new folder. The screen will appear as shown below, and please fill or choose your desired items. Name : Myfolder Protocol : CIFS Server IP : 10. 1. ...

  • Lanier IS100e - page 55

    Managing Filing Folders 5 - 7 Filing documents on the web Page ADDING NEW FOLDERS To add a new folder, 1. Repeat Step 1 to 4 from the previous chapter, and click Folder icon to show up Favorite Folder dialog as shown below: 2. Click Add to prompt the Favorite Folder dialog. 3. Click Continue for the next input or Fini sh to temporarily save the lat ...

  • Lanier IS100e - page 56

    Managing Filing Folders 5 - 8 MODIFYING FOLDERS To modify a folder, 1. Repeat Step 1 in the previous section . T he Favorite Folder ’s main screen appears, as below: 2. Click Modify to prompt Favorite Folder dialog screen as below: Now, refer to the previous section to modify your folder content. 3. Click Upd ate to temporarily save the latest da ...

  • Lanier IS100e - page 57

    Managing Filing Folders 5 - 9 DELETING FOLDERS To delete a folder, 1 . Repeat Step 1 in the previous section, the Favorite Folder ’s main screen appears, as below: 2. Click the Delete icon and choose the folder name you want to delete from the list. 3. Click Delete to erase the number. A warning message appears to confirm y our deletion. Click OK ...

  • Lanier IS100e - page 58

    Managing Filing Folders 5 - 10 ...

  • Lanier IS100e - page 59

    Operation 6 - 1 6 Operation With an intuitive control panel, IMAGE SCANNER IS100e is d esigned to be easy - to - use. Basically, operating IMAGE SCANNER IS100e takes three simple steps: 1. Load your paper either in the ADF or on the glass. 2. Choosing the “ E - Mail ” , “ COPY ” , or “ FILING ” Key, and i nput r elative i tems r especti ...

  • Lanier IS100e - page 60

    Operation 6 - 2 Loading Paper IMAGE SCANNER IS100e can scan and send document(s) either in the ADF (Automatic Documen t Feeder) or on the glass. If you need to send multiple pages, please load your papers in the ADF. The ADF can hold up to 25 pages at one time. If you need to send pages from books, newspaper clippings, or paper with wrinkles or cur ...

  • Lanier IS100e - page 61

    Operation 6 - 3 PLACING DOCUMENT(S) IN THE ADF 1. M ake sure your document is free of staples, paper clips and is not tore out. 2. I f you have multiple pages, fan your document(s) to avoid occasional paper jam. The ADF holds up to 25 pages at one time. 3. Place your document(s) with the text FACE UP in the ADF and make sure that the top of the pag ...

  • Lanier IS100e - page 62

    Operation 6 - 4 PLACING DOCUMENT(S) ON THE GLASS 1. Open the document(s) cover to reveal the glass. 2. Place your document(s) with the text FACE DOWN on the glass and align the document(s) in the upper - right corner of the glass. 3. Close the document cover. ...

  • Lanier IS100e - page 63

    Operation 6 - 5 Sending E - mails 1. Place your document(s) face up in the ADF or face down on the glass. 2. Press the “ E - mail ” key. The LCD displays the E - mail screen. You can make the temporary settings for your E - mail. - Resolutions You can select your scanning resolution between Fine (75 dpi, 100 dpi, 150 dpi, 200 dpi, 300 dpi, 400 ...

  • Lanier IS100e - page 64

    Operation 6 - 6 3. Enter your e - mail address manually with the keyboard. Or select the e - mail address from the address book via the “ Address Book/Folders ” key, select with the “ up ” and “ down ” key and press the “ OK ” key . Enter or select CC and BCC ad d ress as well, if necessary. 4. Enter the subject for your E - mail wi ...

  • Lanier IS100e - page 65

    Operation 6 - 7 1. You can send your document to e - mail addresses simultaneously. 2. If the "Enable Security for Email" box has been checked, you have to enter the password to access the e - mail forwarding function . 3. If you make a mistake during the process, press the “ Clear/Stop ” key to cancel and return to the factory defaul ...

  • Lanier IS100e - page 66

    Operation 6 - 8 Making Cop y BEFORE MAKING COPY Before making copy through the control panel, please do the following: 1. Make sure that your printer supports PCL or Postscript printer language. 2. Check if your printer has been properly connected to IMAGE SCANN ER IS100e. ...

  • Lanier IS100e - page 67

    Operation 6 - 9 BASIC OPERATING STEP S To make simple copy, 1. Place your document(s) either in the ADF or on the glass. 2. Press the "Black&White" key to send your document(s) in black and white. Or press the "Full Color" key to send your document(s ) in color. The LCD displays the scanning progress of the printing of your ...

  • Lanier IS100e - page 68

    Operation 6 - 10 AC CESSING COPY FEATURE S You can access a variety of copy features before pressing the "Black&White" or "Full Colo r" keys. These features include: • Changing Scaling • Adjusting Density • Choosing Copy Quality • Choosing Paper Size • Increasing Copy Count • Focusing on Text / Photo / Mixed ...

  • Lanier IS100e - page 69

    Operation 6 - 11 CHANGING SCALING To reduce or enlarge the original document, 1. P ress the “ Copy ” key on the panel to prompt the Copy screen. 2. Press the s key to enlarge your document in 1 percent increment. Or press the ‚ key to reduce your document in 1 percent decrement. Or, p ress the round key s to choose your scaling from pre set s ...

  • Lanier IS100e - page 70

    Operation 6 - 12 ADJUSTING DENSITY IMAGE SCANNER IS100e is preset to the Normal level of d ensity . If you r original document comes with a lighter or darker contrast, you can improve the quality using the Adjusting Density feature. To change your density , 1. Press the “ Copy ” key on the panel to prompt the Copy screen. 2. Press the "dow ...

  • Lanier IS100e - page 71

    Operation 6 - 13 CHOOSING COPY QUALITY IMAGE SCANNER IS100e is preset to Fine copy quality , the setting suitable for most bus iness document(s). If necessary, this setting can be changed to Super Fine copy quality . To choose your copy quality , Press the "Super Fine" key to enhance your copy quality . The “ Super Fine ” key appears ...

  • Lanier IS100e - page 72

    Operation 6 - 14 C HOOSING PAPER SIZE To change your input paper size, 1. Press the “ Copy ” key on the Control Panel to prompt the Copy screen. 2. Press the “ down ” key to scroll down to the A 4 / Letter / Legal field. 3. Choose your focus with the “ left ” key or the “ right ” keys . To change your preset output paper size, Your ...

  • Lanier IS100e - page 73

    Operation 6 - 15 4. Choose the paper size with the “ left ” key o r the “ right ” key and press the “ OK ” key. INCREASING COPY COUN T IMAGE SCANNER IS100e is preset to 1 copy count. If you wish to increase the number of cop ies, choose your desired copy count with the numeric keypad or keyboard. To increase your copy count, 1. Press th ...

  • Lanier IS100e - page 74

    Operation 6 - 16 FOCUSING ON PHOTO OR TEXT The machine is preset to auto mode. If required, you can change to photo or text if you wish to focus your copy result on photo or on text. To change your focus on photo or text, 4. Press the “ Copy ” key on the Control Panel to prompt the Copy screen. 5. Press the “ down ” key to scroll down to th ...

  • Lanier IS100e - page 75

    Operation 6 - 17 Start Filing Document WORK WITH THE CONTRO L PANEL 1. P l ace your document(s) face up in the ADF or face down on the glass. 2. P ress the "Filing" key . The LCD displays the Filing screen. File Prefix: MyImage Folder : My folder Password : ***** Post Proc. : N one <Size: LT> Press “ Filing ” to change. Note: If ...

  • Lanier IS100e - page 76

    Operation 6 - 18 (A) After the filing operation screen appears, fil l in the File Prefix on the first line. (B) The folder on the second line is the folder - setting file. If you want to add a new folder at this moment, press the "Address Book/Folders" key , selecting <New Folder> to generate a new fol d er. You can make the t empor ...

  • Lanier IS100e - page 77

    Operation 6 - 19 3. Press the "Black&White" key to send your document in black and white or the "Full Color" key in color. Note: In the FTP or CIFS mode with no directory existing, IMAGE SCANNER IS100e will ask you whether to generate a new directory . If you select “ yes ” , IMAGE SCANNER IS100e will generate a new dire ...

  • Lanier IS100e - page 78

    Operation 6 - 20 ...

  • Lanier IS100e - page 79

    Troubleshooting 7 - 1 7 Troubleshooting Information Codes/Message Information Codes During Scanning and Copying Info code Meaning Action Page 10001 SRAM error Restart your IMAGE SCANNER IS100e. (Turn off and on again.) If the code still appears, contact your dealer. -- 1000 2 DRAM error Restart your IMAGE SCANNER IS100e. If the code still appears, ...

  • Lanier IS100e - page 80

    Troubleshooting 7 - 2 MESSAGE DURING SCANNING AND COPYING LCD Message Action Page Copy function d isabl es. Please download the printer profile. -- Check p rinter cable or status . 1. Check if the printer cable has been corre ctly connected. 2. Check if the printer is turned on. 3. Restart IMAGE SCANNER IS100e and your printer. 4. If the message st ...

  • Lanier IS100e - page 81

    Troubleshooting 7 - 3 INFORMATION CODES D URING E - MAILING Info Code Meaning Action Page 30421 31421 32421 Service not available , closing transmission channel. The Server is going to shut down. Contact the network administrator . 31450 Requested mail action not taken: mailbox unavailable Check the “To” address. 31451 32451 33 451 Requested ac ...

  • Lanier IS100e - page 82

    Troubleshooting 7 - 4 Info Code Meaning Action Page 30530 31530 Authentication required: Mail server requires authentication in order to perform the requested action. Contact your network administrator for further help on mail server ’ s authentication mechanism . Choose SMTP authentication for e - mail s ecurity o r turn off the mail server ’ ...

  • Lanier IS100e - page 83

    Troubleshooting 7 - 5 Information Codes During Filing Info Code Me aning Action Page 41530 FTP password incorrect Check password in folder and try again. -- 41421 42421 43421 44421 FTP Service not available Make sure the FTP server is not shut downing. If the error is still there, contact your system administrator. -- 42530 FTP login fail Check Ser ...

  • Lanier IS100e - page 84

    Troubleshooting 7 - 6 Info Code Mea ning Action Page 50105 CIFS (User level) login fail Check Server UID and password in folder and try again. 50167 CIFS (User level) No access right This server UID has not right to write file in this directory or share name incorrect. 50201 CIFS Serv er internal error Check CIFS server and try again. 50202 CIFS (S ...

  • Lanier IS100e - page 85

    Troubleshooting 7 - 7 Info Code Meaning Action Page 60800 HTTP fail to connect Check Server IP and HTTP (or AVPP) port. Make sure they are correct. Or, Check whether that server supports HTTP connection. 61401 62401 HTTP Unauthorized This HTTP server needs authorization. Make sur e your account has correct authorization. 61403 62403 HTTP Forbidden ...

  • Lanier IS100e - page 86

    Troubleshooting 7 - 8 Info Code Meaning Action Page 61505 62505 90505 HTTP server does not support HTTP version 1.1 That server does not support H TTP version 1.1 (IMAGE SCANNER IS100e uses), contact your system administrator for help. 91000 AVPP Parsing error The application response is not compliance with AVPP spec. Contact developer to modify ap ...

  • Lanier IS100e - page 87

    Troubleshooting 7 - 9 Clearing a Paper Jam In the event of a paper jam, follow the procedures below to remove the paper: 1. Gently open the ADF front cover to the left. 2. Carefully pull the paper out of the ADF unit. 3. Close the ADF front cover. Your IMAGE SCANNER IS100e is now ready to use. ...

  • Lanier IS100e - page 88

    Troubleshooting 7 - 10 Removing the abnormal line image When the scanned image is with abnormal lines on it, clean the strip of glass area as indicated below. Clean this area. ...

  • Lanier IS100e - page 89

    Troubleshooting 7 - 11 Cleaning the ADF From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case IMAGE SCANNER IS100e may not feed documents smo othly. If this occurs please follow the cleaning procedures to return your machine to its original state. 1. Moisten a cotton swa ...

  • Lanier IS100e - page 90

    Troubleshooting 7 - 12 Cleaning the Glass IMAGE SCANNER IS1 00e is designed to be maintenance - free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance. To clean the glass, 1. Open the document cover as shown below. 2. Dip a soft clean cloth with isopropyl alcohol (95%). 3. Gently wipe the document g ...

  • Lanier IS100e - page 91

    Troubleshooting 7 - 13 Replacing the Snap - in Pad Module After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended to replace the pad module with a new one. For ordering the pad module, please consult your n earest dealer and foll ...

  • Lanier IS100e - page 92

    Troubleshooting 7 - 14 Assembling Procedure 1. Take out the ADF pad module from the box. 2. Press both arms of the ADF snap - in pad module inwardly with your tw o fingers 3. Place it into the holes until it snaps into place. ...

  • Lanier IS100e - page 93

    Troubleshooting a Appendix Quick Guide Placing Your Documents For multi - page transmission Place your document FACE UP in the ADF. For single - page transmission Pla ce your documents FACE DOWN on the glass. ...

  • Lanier IS100e - page 94

    b Press the key to make B&W copy. Press the Copy key. Enter your copy count via the numeric keypad Press the key to make color copy. Press the key to send your document in B&W. Press the E -M ail key. Enter an e - mail address with your keyboard. or press "Address Book/Folders" to select an e - mail address from the list . ( i.e P ...

  • Lanier IS100e - page 95

    Troubleshooting c Specifications Items Specifications System Overview System Description Stand - alone Internet Appliance Output Quality 600 dpi, 36 bit color External Connections 1. RJ - 45 (for Network connection) 2. SPP (for Copy application) 3. PS2 (for Ext ernal standard PS2 keyboard) Internet Transmission Speed (ADF, Letter, B/W, Gray, Color) ...

  • Lanier IS100e - page 96

    d Copy Output Format Postscript, PCL Speed fo r Local Copy B/W: 9 PPM Color: 1.5 PPM Multiple Copies Up to 99 Copy Mode Standard, High Quality Enlarge / Reduce Whole Page (9 3 %) 25%~400% in 1% increment/decrement Pre - set Scales Customized N etwork Spec Connectivity Ethernet 10BaseT/100B aseTX auto - negotiation with RJ - 45 connector Communicati ...

Manufacturer Lanier Category Scanner

Documents that we receive from a manufacturer of a Lanier IS100e can be divided into several groups. They are, among others:
- Lanier technical drawings
- IS100e manuals
- Lanier product data sheets
- information booklets
- or energy labels Lanier IS100e
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lanier IS100e.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lanier IS100e, service manual, brief instructions and user manuals Lanier IS100e. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lanier IS100e.

Similar manuals

A complete manual for the device Lanier IS100e, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lanier IS100e by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lanier IS100e.

A complete Lanier manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lanier IS100e - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lanier IS100e, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lanier IS100e, that we can find in the current document
3. Tips how to use the basic functions of the device Lanier IS100e - which should help us in our first steps of using Lanier IS100e
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lanier IS100e
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lanier IS100e in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lanier IS100e?

Use the form below

If you did not solve your problem by using a manual Lanier IS100e, ask a question using the form below. If a user had a similar problem with Lanier IS100e it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)