English dropdown-ico

Manual Hitachi CP-X400WF

61 pages Not applicable
Download

Go to site of 61

Summary
  • Hitachi CP-X400WF - page 1

    1 Projector CP-X200/CP-X300/CP-X400 User's Manual (detailed) Operating Guide Thank you for purchasing this projector . WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” rst. After reading them, store them in a safe place for future reference. About this manual V arious symbols ...

  • Hitachi CP-X400WF - page 2

    2 About this manual . . . . . . . . . . 1 Content . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 Contents of package . . . . . . . . . . . . . 3 Fastening the lens cover . . . . . . . . . . 3 Par t names . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . ...

  • Hitachi CP-X400WF - page 3

    3 F astening the lens co ver T o avoid losing the lens cover , please fasten the lens cover to the projector using the enclosed strap. 1. Fix the strap to the strap hole of the lens cover . Thread one end of the stra p through the strap hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not hav ...

  • Hitachi CP-X400WF - page 4

    4 Par t names Part names Projector (1) Lamp cover (  51 ) The lamp unit is inside. (2) Focus ring (  18 ) (3) Zoom ring (  18 ) (4) Control panel (  5 ) (5) Elevator buttons (x 2) (  18 ) (6) Elevator feet (x 2) (  18 ) (7) Remote sensor (  13 ) (8) Lens (  18, 54 ) (9) Lens cover (  3 ) (10) Intake vents (1 1) Filter cov ...

  • Hitachi CP-X400WF - page 5

    5 Par t names Control panel (1) ST ANDBY/ON button (  15 ) (2) INPUT button (  16, 22 ) (3) MENU button (  22 ) It consists of four cursor buttons. (4) POWER indicator (  15, 56 ) (5) TEMP indicator (  56 ) (6) LAMP indicator (  56 ) R ear panel (1) AUDIO IN1 port (  10 ) (2) AUDIO IN2 port (  10 ) (3) AUDIO OUT port (  1 ...

  • Hitachi CP-X400WF - page 6

    6 Par t names R emote control (1) VIDEO button (  17 ) (2) COMPUTER button (  16 ) (3) SEARCH button (  17 ) (4) ST ANDBY/ON button (  15 ) (5) ASPECT button (  17 ) (6) AUTO button (  19 ) (7) BLANK button (  21 ) (8) MAGNIFY - ON button (  20 ) (9) MAGNIFY - OFF button (  14, 20 ) (10) HOME button (  14 ) (1 1) END b ...

  • Hitachi CP-X400WF - page 7

    7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending fr ...

  • Hitachi CP-X400WF - page 8

    8 Setting up On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. <CP-X300> The values shown in the table are calculated for a full size screen: 1024? ...

  • Hitachi CP-X400WF - page 9

    9 Setting up WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector . Using a damaged projector could then result in re and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or in ...

  • Hitachi CP-X400WF - page 10

    10 Setting up Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. WARNING ►Do not disassemble or modify the p ...

  • Hitachi CP-X400WF - page 11

    1 1 Setting up NOTE • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector . - Some PCs ...

  • Hitachi CP-X400WF - page 12

    12 Setting up Connecting pow er suppl y At rst, make sure that the power switch of the projector is set to OFF position (marked "O"). 1. Put the connector of the power cord into the AC inlet of the projector . 2. Firmly plug the power cord’s plug into the outlet. WARNING ►Please use extra caution when connecting the power cord, as ...

  • Hitachi CP-X400WF - page 13

    13 Remote control Putting batteries Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1. Holding the hook part of the battery co ...

  • Hitachi CP-X400WF - page 14

    14 Using as a simple PC mouse & k eyboar d The enclosed remote control works as a simple mouse and keyboard of the PC, when the projector's USB port (B type) connects with the PC's USB port (A type) port via a mouse cable. (1) HOME key: Press HOME button. (2) END key: Press END button. (3) P AGE UP key: Press P AGE UP button. (4) P AG ...

  • Hitachi CP-X400WF - page 15

    15 T ur ning on the power 1. Make su re that the powe r cord is rmly and co rrectly connected to the projector and the outlet. 2. Remove the lens cover , and set the power switch to ON position (marked “ I “). The POWER indicator will light up in steady orange (  56 ). Then wait several seconds because the buttons may not function for the ...

  • Hitachi CP-X400WF - page 16

    16 Selecting an input signal 1. Press INPUT button on the projector . Each time you press the button, the projector switches its input port as below . COMPUTER IN 1  COMPUTER IN 2 VIDEO  S-VIDEO  COMPONENT (Y , Cb/Pb, Cr/Pr) Operating Adjusting the v olume 1. Press VOLUME button on the remote control. A dialog will appear on the screen to ...

  • Hitachi CP-X400WF - page 17

    17 Operating Searching an input signal 1. Press SEARCH button on the remote control. The projector will start to check its input ports in order to nd any input signals. When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation. COMP ...

  • Hitachi CP-X400WF - page 18

    18 Adjusting the zoom and f ocus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Operating Focus ring Zoom ring Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet c ...

  • Hitachi CP-X400WF - page 19

    19 Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. T o complete this ...

  • Hitachi CP-X400WF - page 20

    20 Operating Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go into the MAGNIFY mode. The indication will disappear in several seconds with no operation. 2. Use the ▲/▼ cursor buttons to adjust the zoom level. T o move the zoom area ...

  • Hitachi CP-X400WF - page 21

    21 Operating T emporaril y blanking the screen 1. Press BLANK button on the remote control. The blank screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (  36 ). T o exit from the blank scre en and return to th e input signal screen , press BLANK button again. ● The projector automatically ...

  • Hitachi CP-X400WF - page 22

    22 1. Press the MENU button on the remote control or the projector . The Advanced Menu or EASY MENU, which has priority just after powered on will appear . If you want t o move the me nu position, u se the cursor buttons after pressing the POSITION button. While the projector is displaying any menu, MENU button on the projector works as the cursor ...

  • Hitachi CP-X400WF - page 23

    23 Using the menu function (continued) In the Advanced Menu 2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select EASY MENU. Then press the ► cursor button, or ENTER button to select an item. The lower layer menu of the selected item will appear . 3. Use the ▲/▼ cursor buttons to select an item ...

  • Hitachi CP-X400WF - page 24

    24 EASY MENU EASY MENU Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (  29 ). AUTO KEYSTONE EXECUTE Using the ► button executes the auto keystone function. See AUTO KEYST ONE EXECUTE item in SETUP menu (  34 ). KEYSTONE Using the ◄/► buttons corrects the vertical ...

  • Hitachi CP-X400WF - page 25

    25 EASY MENU Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See BRIGHTNESS item in PICTURE menu (  26 ). CONTRAST Using the ◄/► buttons adjusts the contrast. See CONTRAST item in PICTURE menu (  26 ). COLOR Using the ◄/► buttons adjusts the strength of whole color . See COLOR item in PICTURE menu (  2 ...

  • Hitachi CP-X400WF - page 26

    26 PICTURE Menu PICTURE Menu Item Description BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness. Light ó Dark CONTRAST Using the ▲/▼ buttons adjusts the contrast. Strong ó Weak GAMMA Using the ▲/▼ buttons switches the gamma mode. T o adjust the "CUSTOM" modes, see "T o adjust CUSTOM function in GAMMA and COLOR TEM ...

  • Hitachi CP-X400WF - page 27

    27 Item Description SHARPNESS Using the ▲/▼ buttons adjusts the sharpness. Strong ó Weak • There may be some noise and/or the screen may icker for a moment when an adjustment is made. This is not a malfunction. MY MEMOR Y This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ...

  • Hitachi CP-X400WF - page 28

    28 PICTURE Menu T o adjust CUST OM function in GAMMA and COLOR TEMP S e l e c t i n g a m o d e w h o s e n a m e i n c l u d e s C U S TO M i n G A M M A o r C O L O R T E M P i t e m a n d t h e n p r e s s i n g t h e ► b u t t o n o r E N T E R butto n displays a di alog to a id you in adjusting the mode. C ho o s e a n i t e m u s i n g t h ...

  • Hitachi CP-X400WF - page 29

    29 IMAGE Menu IMAGE Menu Item Description ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. For a computer signal NORMAL ó 4:3 ó 16:9 ó SMALL For a video signal, s-video signal or component video signal 4:3 ó 16:9 ó 14:9 ó SMALL For no signal 4:3 (xed) • This item can be selected only for a proper signal. • NORMAL mo ...

  • Hitachi CP-X400WF - page 30

    30 IMAGE Menu Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate icker . Right ó Left • This ite m can be selected only for a c omputer signal or component video signal. H SIZE Using the ▲/▼ buttons adjusts the horizontal size. Large ó Small • This item can be selected only for a computer signa ...

  • Hitachi CP-X400WF - page 31

    31 INPUT Menu INPUT Menu Item Description PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a video, s-video or component video of 525i (480i) or 625i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to t ...

  • Hitachi CP-X400WF - page 32

    32 Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó P AL ó SECAM N-P AL ó M-P AL ó NTSC4.43 • This item is performed only for a video signal from VIDEO port or S-VIDE ...

  • Hitachi CP-X400WF - page 33

    33 INPUT Menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector . (1) In INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ butt ...

  • Hitachi CP-X400WF - page 34

    34 SETUP Menu SETUP Menu Item Description AUTO KEYSTONE EXECUTE Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This function will be execut ed only once when selected in the menu. When the slant of the proje ...

  • Hitachi CP-X400WF - page 35

    35 SETUP Menu SETUP Menu (continued) Item Description WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When WHI SPER is se lected, ac oustic noi se and scr een bright ness are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V :INVERT ó H&V :INVERT If the ...

  • Hitachi CP-X400WF - page 36

    36 SCREEN Menu SCREEN Menu Item Description LANGUAGE Using the ▲/▼ buttons switches the OSD (On Screen Display) language.  TÜRKÇE  POLSKI  SUOMI  ENGLISH  FRANÇAIS  DEUTSCH  ESP AÑOL  IT ALIANO  NORSK  NEDERLANDS  PORTUGUÊS  РУССКИЙ  SVENSKA  뼑鞵  㐕储Ё᭛  ㅔԧЁ᭛  ᣣᧄ? ...

  • Hitachi CP-X400WF - page 37

    37 SCREEN Menu Item Description ST ART UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by the MyScreen item (  38 ) . ORIGINAL Screen preset as the standa ...

  • Hitachi CP-X400WF - page 38

    38 SCREEN Menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturi ...

  • Hitachi CP-X400WF - page 39

    39 SCREEN Menu Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching…” while searching for the input “De ...

  • Hitachi CP-X400WF - page 40

    40 OPTION Menu OPTION Menu Item Description AUTO SEARCH Using the ▲/ ▼ buttons t urns on/of f the automatic signa l search fun ction. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order . The search is started from the current port. Then when an input is found, th ...

  • Hitachi CP-X400WF - page 41

    41 Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When th e time i s set t o 0, the projec tor is n ot turn ed of f automaticall y . When the time is set to 1 to 99, and when the passed time with no- signal or an un ...

  • Hitachi CP-X400WF - page 42

    42 Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1 and 2 on the remote control (  6 ). Choose 1 or 2 on the MY BUTT ON menu using the ◄/► button rst. Then using the ▲/▼ buttons se ts one of the f ollowing functi ons to the chosen button. • COMPUTER1: Sets port to COMPUTER IN1. • CO ...

  • Hitachi CP-X400WF - page 43

    43 Item Description SERVICE (continued) AUTO ADJUST Using the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting. FINE ó F AST ó DISABLE FINE: Finer tuning including H.SIZE adjustment. ...

  • Hitachi CP-X400WF - page 44

    44 Item Description SERVICE (continued) KEY LOCK Us i n g th e ▲/ ▼ bu t t o ns t u rn s o n/ o ff t he k e y l o ck f e at u r e . W h e n T U R N O N i s s e l e c t e d , t h e b u t t o n s o n t h e p r o j e c t o r e x c e p t t h e ST ANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching acciden ...

  • Hitachi CP-X400WF - page 45

    45 Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER P ASSWOR ...

  • Hitachi CP-X400WF - page 46

    46 Item Description SECURITY (continued) 1.3 If you have forgotten your P ASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER P ASSWORD box. 1.3-2 While the ENTER P ASSWORD box is displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit ...

  • Hitachi CP-X400WF - page 47

    47 Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the P ASSWORD AGAIN box and press the ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to MyScreen P ASS WORD on/off menu. When a P ASSWORD is set for MyScreen: • Th ...

  • Hitachi CP-X400WF - page 48

    48 Item Description SECURITY (continued) 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER and INPUT buttons. A PIN Code again box will appear . Reenter the same PIN Code. This will complete the PIN Code registration. ? ...

  • Hitachi CP-X400WF - page 49

    49 Item Description SECURITY (continued) 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below . • T ransition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • T ransition Det ...

  • Hitachi CP-X400WF - page 50

    50 Item Description SECURITY (continued) 4.2-4 M o v e t h e c u r s o r t o t h e r i g h t s i d e o f t h e PA S S W O R D A G A I N b o x a n d p r e s s t h e ► bu t t o n t o d i s p l a y t h e PAS S W O R D f o r about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to the TRANSITION D ...

  • Hitachi CP-X400WF - page 51

    51 Maintenance Lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new lamp, c ...

  • Hitachi CP-X400WF - page 52

    52 Maintenance Lamp (continued) Lamp warning HIGH VOL T AGE HIG H T EMPE RA TURE HIGH PRESSU RE • I f t h e la m p s h o u l d b r e a k ( i t w i l l m a k e a l o u d b a n g w h e n it d o e s ) , un p l u g t h e po w e r c o rd f r o m t h e o ut l e t , a n d ma k e s u r e to r e q u e st a re p l a c e m e nt l a m p f r o m y o u r l oc ...

  • Hitachi CP-X400WF - page 53

    53 Please check and clean the air lter periodically . When the indicators or a message prompts you to clean the air lter , comply with it as soon as possible. Replace the air lter when it is damaged or too soiled. T o prepare a new air lter , contact your dealer and tell the air lter type number . T ype number : MU04951 When you repl ...

  • Hitachi CP-X400WF - page 54

    54 Maintenance Inside of the projector In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . Caring for the lens If the lens is awed, soiled or fogged, it could cause deterioration of display quality . Please take care of the lens, being cautious of handling. 1. T urn the ...

  • Hitachi CP-X400WF - page 55

    55 T roubleshooting If an abnormal operation should occur , stop using the projector immediately . T r oubleshooting Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . They will tell you ...

  • Hitachi CP-X400WF - page 56

    56 T r oubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the sectio ...

  • Hitachi CP-X400WF - page 57

    57 T r oubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Lighting In Red There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the pro ...

  • Hitachi CP-X400WF - page 58

    58 T r oubleshooting Phenomena that may be easy to be mistak en for mac hine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the p ...

  • Hitachi CP-X400WF - page 59

    59 Pheno mena that may be e asy to be mis taken for mach ine defec ts ( conti nued ) Phenomenon Cases not involving a machine defect Reference page No pictures are displayed. (continued) The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function. 25, 26 The computer cannot detect the projector ...

  • Hitachi CP-X400WF - page 60

    60 Specications Specications Specication Item Specication Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, <CP-X200> F=1.7 ~ 1.9 f = 18.9~ 22.6 mm <CP-X300> F=1.7 ~ 1.9 f = 19.5~ 23.4 ...

  • Hitachi CP-X400WF - page 61

    61 Specications     Specications (continued) [unit: mm] ...

Manufacturer Hitachi Category Video projector

Documents that we receive from a manufacturer of a Hitachi CP-X400WF can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CP-X400WF manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CP-X400WF
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CP-X400WF.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CP-X400WF, service manual, brief instructions and user manuals Hitachi CP-X400WF. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CP-X400WF.

Similar manuals

A complete manual for the device Hitachi CP-X400WF, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CP-X400WF by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CP-X400WF.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CP-X400WF - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CP-X400WF, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CP-X400WF, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CP-X400WF - which should help us in our first steps of using Hitachi CP-X400WF
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CP-X400WF
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CP-X400WF in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CP-X400WF?

Use the form below

If you did not solve your problem by using a manual Hitachi CP-X400WF, ask a question using the form below. If a user had a similar problem with Hitachi CP-X400WF it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)