English dropdown-ico

Manual Oregon Scientific EMR963HG

12 pages 0.28 mb
Download

Go to site of 12

Summary
  • Oregon Scientific EMR963HG - page 1

    1 MULTI-CHANNEL IN-OUT CABLE FREE THERMO-HYGROMETER MODEL : EMR963HG USER’S MANUAL INTRODUCTION Congratulations on your purchase of Oregen Scientific's Cable-Free Thermo-Hygro sensor. Enclosed with this package is one (1) main display unit and one (1) cable-free remote thermo-hygro sensor unit. The main unit has an extra-large multifunction ...

  • Oregon Scientific EMR963HG - page 2

    2 A Extra large two-line Liquid Crystal Display (LCD) Multifunction display showing temperature and humidity, max./min. memory, and trend indicators for the main unit and remote sensors. B CHANNEL button - Selects among different channels - Activates remote sensor scanning mode C IN/REMOTE - Selects between the main-unit display and a selected remo ...

  • Oregon Scientific EMR963HG - page 3

    3 H Wall-mount holder Supports the remote unit in wall-mounting I Removable table stand For standing the remote unit on a flat surface BEFORE YOU BEGIN To ensure proper functioning of the EMR963HG follow this setup procedure. For best operation: 1. Assign different channels to different remote units. 2. Insert batteries for remote units before doin ...

  • Oregon Scientific EMR963HG - page 4

    4 Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the CHANNEL slide switch. 3. Select the temperature display unit on the °C/°F slide switch. 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and se ...

  • Oregon Scientific EMR963HG - page 5

    5 GETTING STARTED Once batteries are placed in a given remote sensor unit, it will start transmitting information at 40-second intervals. Also, for approximately a 3-minute duration, the main unit will automatically search for signals once batteries are installed. Upon successful reception, the individual channel temperature reading will be display ...

  • Oregon Scientific EMR963HG - page 6

    6 The unit is in searching mode. Transmission data are securely registered. No signals. THE COMFORT-LEVEL ICONS The comfort level is based on the recorded relative humidity. An indicator will be displayed ot show if the level is comfortable, wet or dry. TEMPERATURE AND HUMIDITY TREND INDICATORS The temperature-trend and humidity-trend indicators sh ...

  • Oregon Scientific EMR963HG - page 7

    7 To deactivate the remote-sensor scanning mode: • Press any button. MAXIMUM AND MINIMUM TEMPERATURE AND HUMIDITY The maximum and minimum recorded temperature and humidity readings will automatically be stored in the memory. To display the maximum and minimum display memory: 1. Select the channel to be checked. 2. Press MEM/CLEAR once to display ...

  • Oregon Scientific EMR963HG - page 8

    8 Note: The temperature range is from -50°C (-58°F) to +70°C (158°F). If this is the first time you set the limits, the lower limit will start from -50°C (-58°F) and the upper limit +70°C (158°F). Otherwise, the reading will start from the temperature last selected. The humidity range is from 2% to 98%. If this is the first time you set the ...

  • Oregon Scientific EMR963HG - page 9

    9 TRANSMISSION COLLISION Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume o ...

  • Oregon Scientific EMR963HG - page 10

    10 THE RESET BUTTON This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: 1. Do ...

  • Oregon Scientific EMR963HG - page 11

    11 General RF Transmission Frequency : 433 MHz No. of Remote unit : Maximum of 3 RF Transmission Range : Maximum 30 meters Temperature compensation : 0.1° C to ( 0.2°F) Temperature sensing cycle : around 40 seconds Power Main unit : 2 pcs UM-3 or “AA” 1.5V alkaline battery Remote sensing unit : 2 pcs UM-3 or “AA” 1.5V alkaline battery Wei ...

  • Oregon Scientific EMR963HG - page 12

    12 CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using ...

Manufacturer Oregon Scientific Category Thermometer

Documents that we receive from a manufacturer of a Oregon Scientific EMR963HG can be divided into several groups. They are, among others:
- Oregon Scientific technical drawings
- EMR963HG manuals
- Oregon Scientific product data sheets
- information booklets
- or energy labels Oregon Scientific EMR963HG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Oregon Scientific EMR963HG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Oregon Scientific EMR963HG, service manual, brief instructions and user manuals Oregon Scientific EMR963HG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Oregon Scientific EMR963HG.

Similar manuals

A complete manual for the device Oregon Scientific EMR963HG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Oregon Scientific EMR963HG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Oregon Scientific EMR963HG.

A complete Oregon Scientific manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Oregon Scientific EMR963HG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Oregon Scientific EMR963HG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Oregon Scientific EMR963HG, that we can find in the current document
3. Tips how to use the basic functions of the device Oregon Scientific EMR963HG - which should help us in our first steps of using Oregon Scientific EMR963HG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Oregon Scientific EMR963HG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Oregon Scientific EMR963HG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Oregon Scientific EMR963HG?

Use the form below

If you did not solve your problem by using a manual Oregon Scientific EMR963HG, ask a question using the form below. If a user had a similar problem with Oregon Scientific EMR963HG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)