English dropdown-ico

Manual Acu-Rite 150

24 pages 3.64 mb
Download

Go to site of 24

Summary
  • Acu-Rite 150 - page 1

    SENC 150 REFERENCE MANUAL ACU-RITE ® 516291-21_Ve00_SENC_150.indd 1 10/22/2009 10:00:37 AM ...

  • Acu-Rite 150 - page 2

    516291-21_Ve00_SENC_150.indd 2 10/22/2009 10:00:37 AM ...

  • Acu-Rite 150 - page 3

    P age Introduction / Supplied items .................................................. 2 Mounting Preparation .............................................................. 3 Mounting Information ............................................................. 4 Encoder Dimensions .............................................................. 5 Bac ku ...

  • Acu-Rite 150 - page 4

    B C A E D F TheSENC1 50precisionglassscalelinearencoderprovidesthe accuracy and reliability of an A CU-RITE ® measuring system withdigitaloutput(analogoutputavailable).F eaturesandoptions include: • Resolutionsof0.5,1,or5µm. • Accuracygradesof±3,? ...

  • Acu-Rite 150 - page 5

    P leasefollo wthesepreparationguidelines. • Understandyourmountingrequirements. • Mountwithlipsealsdownanda w ayfromthew orkarea. • Brac ketsshouldbekeptasshortaspossibleandrigid. • Surfacesmustbeingoodcondition,clean,andfree ...

  • Acu-Rite 150 - page 6

    4 Mounting Information SENC 150 Usethisinformationtoplany ourlinearencoderinstallation. • Mountthelinearencodersclosetomac hineguideway sto ensure system accuracy . • Onesideofthelinearencoderaddressesushmounting surfaces,andtheoppositesidea ...

  • Acu-Rite 150 - page 7

    5 SENC 150 Encoder Dimensions Measuringlength+6.375 Measuringlength+5.437 .469 [1 1 .9] .944 [24.0] .370 [9.4] Ø .500 C’bore Ø .31 3 T hru Reading Head assembly 2.250 [57 .1] .56 [1 4.4] Ø F or 8-32 (or M4) SHCS mounting screw .32 [8.4] Armor .20 [5.2] Vin yl 1 .25 [32] Min. bend rad. .81 0 [20.6] .285 [7 .2] 1 .87 6 [4 ...

  • Acu-Rite 150 - page 8

    6 Backup Spar Dimensions [mm] SENC 150 ACU-RITE ® “A” ±.381 “A” ±.1 27 “L” ±.381 1 27 .00typ.±.381 Non Accumulativ e “B” typ.±.381 NonA ccumulative “A” Ref . 1 9.05±.1 27 2.79±.1 27 M4 Thru Ø 7 .92 Thru Ø1 2.70C’borex4.06Dp. “X” No. of holes “ ...

  • Acu-Rite 150 - page 9

    “A” ±.0 15 “A” ±.005 “L” ±.0 15 5.00 0typ.±.0 15 Non Accumulativ e “B” typ.±.0 15 NonA ccumulative .750±.005 .1 1 0±.005 Ø.31 2 Thru Ø.500C’borex.160Dp. “X” No. of holes “A” Ref . M4 Thru “E” Bac kup Spar Par t Number Linear Encoder Measuring ...

  • Acu-Rite 150 - page 10

    Mounting Requirements SENC 150 Mounting options can be adapted to mac hine mounting surfaces usingspacers,standoffs,orle velingsetscrews. • Measuringlengthandmec hanicalcongurationofyour mac hine determine your options. • Bac kupsparmountingisanoptionbutnotrequiredfor ...

  • Acu-Rite 150 - page 11

    SENC 150 T ypical Mounting (s) 9 ACU-RITE ® 1/4-20x1”BHCS withencoderwasher Avarietyofmountingconditionscanbeaccommodated. • Themac hinecongurationdeterminesthebrac ketsrequiredto install the linear encoder . • Threetypicalmountingconditionsareshown; ...

  • Acu-Rite 150 - page 12

    Encoder Installation Procedure SENC 150 Thesestepsapplytoallencodermountingconditions,ifasparis beingused,goto “SparInst allationProcedure ”onpage1 1 . •  A CU-RITE ® brac ket kit instructions supercede this section. • Adjustdrilldepthsandf a ...

  • Acu-Rite 150 - page 13

    SENC 150 Encoder Installation Procedure • Drill/taptherstendmountinghole/at tac hthelinearencoder . • Aligntowithin.0 1 0” TIR.to-A-,drill/tapsecondendhole. • At t ac hthelinearencoder/aligntowithin.0 1 0” TIR.to-A-. • ...

  • Acu-Rite 150 - page 14

    These steps apply to all spar mounting conditions. •  A CU-RITE ® brac ket kit instructions supercede this section. • Adjustdrilldepthsandf astenerlengthsasrequired. • Wheninstructedonpage1 2: Adjustthele v elingsetscrewsas follo ws: 1 . Insert,butdo ...

  • Acu-Rite 150 - page 15

    • Insert the encoder into the spar . • Centertheencoderfromendtoendwiththespar . • Loc kinplacebytighteningtheM4setscre ws. • At t ac hthebrack ettothemac hine. • Alignthereadingheadmountingholeswiththebrac ketholes. • At t ac ...

  • Acu-Rite 150 - page 16

    • Routethecableswithslac kloopstoallowf oraxismotion. • Secureex cesscableb yfasteningwithclipsorties. • At t ac hthelinearencoderconnectorstothereadout. • Mov etheaxisandcomparethedispla ytothemov ement. • Mov etheax ...

  • Acu-Rite 150 - page 17

    SENC 150 Electrical Shielding Connectagroundwirefromtheterminalonthebac kofthe readouttothemac hineorearthground.At t ac hagroundwire from the mac hine to a solid earth ground. With the encoder at tac hed to the mac hine and the cable connectedtothereadout,c hec ksh ...

  • Acu-Rite 150 - page 18

    Ifyoue xperiencedifcultieswithy ourinstallation,dothe follo wingtodeterminetheproblem. Chec king the Readout Difcultiesonmorethanoneaxisareusuallyassociatedwiththe readout.F ollo wthesestepstodetermineifyourdifcultiesare associate ...

  • Acu-Rite 150 - page 19

    Connecting cable Length = 5, 13, and 19 ft. armored or vinyl Connector: DE-9P SENC 150 Mechanical Specications Mechanical Specications Digital Analog Resolution 0.5 µm 1 µm 5 µm Grating pitch 20 µm 20 µm Scale medium Light transmission reective off of nickel coated glass Accuracy (@ 20° C) / 1000mm ± 3µm, ± 5µm Max. cable length ...

  • Acu-Rite 150 - page 20

    Output Signals and Pin-Outs SENC 150 Digital Diff erential AnalogDif ferential N/C Green Y ellow Blue Red White Brown Pink Gray N/C Channel Channel Channel Channel Ground Vcc, + 5.1 Channel Channel A+ A- B+ B- ± 0.1 VDC R+ R- Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 White Green Y ellow Blue Red N/C Brown Pink Gray Ground Channel ...

  • Acu-Rite 150 - page 21

    I OH =(High level output current) = 20mA V OH =(High level output voltage) >2.5Vdc I OL =(Low level output current) = -20mA V OL =(Low level output voltage) < 0.6Vdc 90° 360° 1 Count (Phased) Channel R+ 1 0 0° Channel A+ 1 0 1 0 Channel B+ 1 0 1 0 Channel B- Channel A- Channel R- 1 0 Channel R Channel A Channel B 0° 360° I A, B :7-16 µA ...

  • Acu-Rite 150 - page 22

    W arranty SENC 150 For Warranty information, go to www .acu-rite.com. 20 ACU-RITE ® 516291-21_Ve00_SENC_150.indd 22 10/22/2009 10:00:47 AM ...

  • Acu-Rite 150 - page 23

    516291-21_Ve00_SENC_150.indd 23 10/22/2009 10:00:47 AM ...

  • Acu-Rite 150 - page 24

    516291-21 V er 00 • Subject to change without notice • 10/2009 333 East State Park way Schaumbur g, IL 60 17 3-5337 USA HEIDENHAIN CO RPORA TION +1 (847) 490-1 19 1 +1 (847) 490-3931 E-Mail: info@heidenhain.com www.heidenhain.com ACU-RITE ® 516291-21_Ve00_SENC_150.indd 24 10/22/2009 10:00:48 AM ...

Manufacturer Acu-Rite Category TV Mount

Documents that we receive from a manufacturer of a Acu-Rite 150 can be divided into several groups. They are, among others:
- Acu-Rite technical drawings
- 150 manuals
- Acu-Rite product data sheets
- information booklets
- or energy labels Acu-Rite 150
All of them are important, but the most important information from the point of view of use of the device are in the user manual Acu-Rite 150.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Acu-Rite 150, service manual, brief instructions and user manuals Acu-Rite 150. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Acu-Rite 150.

Similar manuals

A complete manual for the device Acu-Rite 150, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Acu-Rite 150 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Acu-Rite 150.

A complete Acu-Rite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Acu-Rite 150 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Acu-Rite 150, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Acu-Rite 150, that we can find in the current document
3. Tips how to use the basic functions of the device Acu-Rite 150 - which should help us in our first steps of using Acu-Rite 150
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Acu-Rite 150
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Acu-Rite 150 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Acu-Rite 150?

Use the form below

If you did not solve your problem by using a manual Acu-Rite 150, ask a question using the form below. If a user had a similar problem with Acu-Rite 150 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)