English dropdown-ico

Manual Axis Communications P3346

64 pages 1.08 mb
Download

Go to site of 64

Summary
  • Axis Communications P3346 - page 1

    AXIS P3346 Fixed Dome Network Camera User Manual ...

  • Axis Communications P3346 - page 2

    About this document This manual is intended for administrators and users of AXIS P3346 Fixed Dome Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based ...

  • Axis Communications P3346 - page 3

    The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www .axis.com/techsup for assistance. WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according ...

  • Axis Communications P3346 - page 4

    AXIS P3346 Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications P3346 - page 5

    AXIS P3346 Fixed Dome Network Camera T able of Contents Emergency Recovery Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . . . . . . . . . . . 55 Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications P3346 - page 6

    AXIS P3346 Fixed Dome Network Camera Hardware Overview Hardware Overview 2 1 3 4 5 6 7 8 1 Product ID and Serial number (S/N) 2 SD card slot 3 Network connector (P oE) 4 Audio out 5 Network, Status and P ower LED indicators 6 Audio in 7 I/O connector 8 Control button Connectors and Buttons For technical specications, see page 59 . Network Connec ...

  • Axis Communications P3346 - page 7

    AXIS P3346 Fixed Dome Network Camera Hardware Overview Audio Connector The Axis product has the following audio connectors: • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal). • Audio out (green) – 3.5 mm output for audio (line level) that can be connected to a public ...

  • Axis Communications P3346 - page 8

    AXIS P3346 Fixed Dome Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating ...

  • Axis Communications P3346 - page 9

    AXIS P3346 Fixed Dome Network Camera Accessing the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must congure your network router to allow incoming data trafc to the product. To do this, enable the NAT-traversal feature, which will attem ...

  • Axis Communications P3346 - page 10

    AXIS P3346 Fixed Dome Network Camera Accessing the Product 2. Enter a password and then re-enter it to conrm the spelling. 3. Click OK . The password has now been congured. Congure Capture Mode Capture mode denes the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting also affects the camera ...

  • Axis Communications P3346 - page 11

    AXIS P3346 Fixed Dome Network Camera Accessing the Product 1. Go to Setup > Events . 2. Click Add to add a new action rule. 3. From the Trigger drop-down list, select Input Signal . 4. From the second drop-down list, select Manual T rigger . 5. Select the desired action and congure the other settings as required. For more information about ac ...

  • Axis Communications P3346 - page 12

    AXIS P3346 Fixed Dome Network Camera Accessing the Product PTZ Controls The Live View page also displays P an/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specied users under System Options > Security > Users . Note These controls are available if digital PTZ is enabled in the selected view area, see View Are ...

  • Axis Communications P3346 - page 13

    AXIS P3346 Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available ...

  • Axis Communications P3346 - page 14

    AXIS P3346 Fixed Dome Network Camera Media Streams The AMC Control Panel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows ...

  • Axis Communications P3346 - page 15

    AXIS P3346 Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Accessing Audio Streams The Liv ...

  • Axis Communications P3346 - page 16

    AXIS P3346 Fixed Dome Network Camera Setting Up the Product Setting Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have ac ...

  • Axis Communications P3346 - page 17

    AXIS P3346 Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 17 . • Stream proles. See page 19 . • Camera settings. See page 19 . • View areas. See page 2 1 . • Overlay image. See p ...

  • Axis Communications P3346 - page 18

    AXIS P3346 Fixed Dome Network Camera Video and Audio Pixel Counter The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example in face recognition. The pixel counter can be accessed from: • Video & Audio > Video St ...

  • Axis Communications P3346 - page 19

    AXIS P3346 Fixed Dome Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules. See Events on page 36 . • When setting up continuous recording. See Cont ...

  • Axis Communications P3346 - page 20

    AXIS P3346 Fixed Dome Network Camera Video and Audio Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0–1 00, where a higher value produces a brighter image. Increasing the Sharpness ...

  • Axis Communications P3346 - page 21

    AXIS P3346 Fixed Dome Network Camera Video and Audio Day/Night The IR cut lter prevents infrared (IR) light from reaching the image sensor . In poor lighting conditions, for example at night, or when using an external IR lamp, set the IR cut lter to Off . This increases light sensitivity and allows the product to “see” infrared light. The ...

  • Axis Communications P3346 - page 22

    AXIS P3346 Fixed Dome Network Camera Video and Audio 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded to the Axis product, see Overlay Image . 3. To include date and time, select Include date and Include time . 4. To include a text string, select Include text and enter the t ...

  • Axis Communications P3346 - page 23

    AXIS P3346 Fixed Dome Network Camera Video and Audio Focus & Zoom Focus and zoom should only be congured when installing or reinstalling the product. For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > ...

  • Axis Communications P3346 - page 24

    AXIS P3346 Fixed Dome Network Camera Video and Audio Audio Input An external microphone or a line source can be connected to the Audio-in connector . Congure the audio input settings under Video & Audio > Audio Settings . Note The internal microphone is used by default; the external microphone is used when connected. It is possible to dis ...

  • Axis Communications P3346 - page 25

    AXIS P3346 Fixed Dome Network Camera Video and Audio To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips . For more information see the online help . To congure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see Events on page 36 . Note Audio cl ...

  • Axis Communications P3346 - page 26

    AXIS P3346 Fixed Dome Network Camera Live View Config Live View Config Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 19 . • Default Viewer for Browser . See page 26 . • Viewer Settings. See page 27 . • Action ...

  • Axis Communications P3346 - page 27

    AXIS P3346 Fixed Dome Network Camera Live View Config Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher . • JRE (J2SE) 5.0 or higher . Wind ...

  • Axis Communications P3346 - page 28

    AXIS P3346 Fixed Dome Network Camera Live View Config - Pulse activates the output for a dened period of time. The pulse time can be set from 1/1 00 second to 60 seconds. - Active/Inactive displays two buttons, one or each action. To congure the active and inactive states, go to System Options > P orts & Devices > I/O Ports and set ...

  • Axis Communications P3346 - page 29

    AXIS P3346 Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 2 1 . Preset P ositions A preset position is a predened view that can be used to quickly steer the camera to a s ...

  • Axis Communications P3346 - page 30

    AXIS P3346 Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser . To add a guard tour: 1. Go t ...

  • Axis Communications P3346 - page 31

    AXIS P3346 Fixed Dome Network Camera Detectors Detectors Camera T ampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T ampering . ...

  • Axis Communications P3346 - page 32

    AXIS P3346 Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion ...

  • Axis Communications P3346 - page 33

    AXIS P3346 Fixed Dome Network Camera Detectors High level (100%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for a long time before it is considered as non-moving. Ordinary colored objects on ordinary backgrounds trigger motion detection. Medium level (50%) A large difference in l ...

  • Axis Communications P3346 - page 34

    AXIS P3346 Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available application ...

  • Axis Communications P3346 - page 35

    AXIS P3346 Fixed Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 35 ...

  • Axis Communications P3346 - page 36

    AXIS P3346 Fixed Dome Network Camera Events Events The Axis product can be congured to perform actions when different events occur , for example, start a recording when motion is detected. The set of conditions that denes how and when the action is triggered is called an Action Rule . Available action rule triggers and conditions include: • ...

  • Axis Communications P3346 - page 37

    AXIS P3346 Fixed Dome Network Camera Events • Time - Recurrence – Trigger the rule periodically . See Recurrences on page 39 . This can for example be used to upload an image every 5 minutes. - Use Schedule – Trigger the rule according to the selected schedule. See Schedules on page 39 . Available actions include: • Day/Night Vision Mode ? ...

  • Axis Communications P3346 - page 38

    AXIS P3346 Fixed Dome Network Camera Events To add additional criteria, select the Additional conditions option and add additional triggers. T o prevent an action from being triggered repeatedly , a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be a ...

  • Axis Communications P3346 - page 39

    AXIS P3346 Fixed Dome Network Camera Events Setting Up an Email Recipient Email recipients can be congured by selecting one of the listed email providers, or by specifying the SMTP server , port and authentication used by , for example, a corporate email server . Note Some email providers have security lters that prevent users from receiving ...

  • Axis Communications P3346 - page 40

    AXIS P3346 Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 37 . • To access recordings, see Recording List on page 40 . • To congure camera controlled storage ...

  • Axis Communications P3346 - page 41

    AXIS P3346 Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language butt ...

  • Axis Communications P3346 - page 42

    AXIS P3346 Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anyb ...

  • Axis Communications P3346 - page 43

    AXIS P3346 Fixed Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the d ...

  • Axis Communications P3346 - page 44

    AXIS P3346 Fixed Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. 2. G ...

  • Axis Communications P3346 - page 45

    AXIS P3346 Fixed Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP add ...

  • Axis Communications P3346 - page 46

    AXIS P3346 Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting p ...

  • Axis Communications P3346 - page 47

    AXIS P3346 Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.my ...

  • Axis Communications P3346 - page 48

    AXIS P3346 Fixed Dome Network Camera System Options Note • For NA T traversal to work, this must be supported by the router . The router must also support UPnP TM . • The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home rewall” ...

  • Axis Communications P3346 - page 49

    AXIS P3346 Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. The Axis product can be congured to support SNMP on the System Options > ...

  • Axis Communications P3346 - page 50

    AXIS P3346 Fixed Dome Network Camera System Options Storage SD Card The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 10. NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. The Axis product s ...

  • Axis Communications P3346 - page 51

    AXIS P3346 Fixed Dome Network Camera System Options 4. Enter the name of the share in the Share eld. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password. 6. Click Connect . To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Stor ...

  • Axis Communications P3346 - page 52

    AXIS P3346 Fixed Dome Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also T roubleshooting on page 54 . System Overview To get an overview of the Axis product’s status and ...

  • Axis Communications P3346 - page 53

    AXIS P3346 Fixed Dome Network Camera System Options File Upload Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where & ...

  • Axis Communications P3346 - page 54

    AXIS P3346 Fixed Dome Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular prob ...

  • Axis Communications P3346 - page 55

    AXIS P3346 Fixed Dome Network Camera Troubleshooting 1. In UNIX/Linux , type the following from the command line: arp -s <IP address> <serial number> temp ping -l 408 <IP address> In Windows , type the following from a command/DOS prompt (this may require that you run the command prompt as an administrator): arp -s <IP address& ...

  • Axis Communications P3346 - page 56

    AXIS P3346 Fixed Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network. Identify the product using its model or serial number , or by the DN ...

  • Axis Communications P3346 - page 57

    AXIS P3346 Fixed Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 63 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control Panel (H ...

  • Axis Communications P3346 - page 58

    AXIS P3346 Fixed Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . To identify the source of the problem, check the System Log under System Options > Support > Logs & ...

  • Axis Communications P3346 - page 59

    AXIS P3346 Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P3346 Image sensor Progressive scan RGB CMOS 1/3'‘ (effective) Lens Varifocal with remote zoom and focus, IR corrected, megapixel resolution 3 – 9 mm, F1.2, P-iris Horizontal angle of view: 84° — 30? ...

  • Axis Communications P3346 - page 60

    AXIS P3346 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 802.1X network access control*, digest authentication, user access log Centralized Certicate Management *This product includes software developed by the Open SSL Project ...

  • Axis Communications P3346 - page 61

    AXIS P3346 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Casing P olycarbonate transparent cover Aluminum inner camera module with encapsulated electronics Tamper-resistant polycarbonate casing Color: white NCS S 100 2–B Processor , memory ARTPEC-3, 256 MB RAM, 128 MB Flash Battery backed-up real-time cl ...

  • Axis Communications P3346 - page 62

    AXIS P3346 Fixed Dome Network Camera T echnical Specifications Connectors I/O Connector 4-pin terminal block for: • Auxiliary power (DC output) • Digital Input • Digital Output • 0 V DC (-) 4 3 2 1 Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment. Note: This pin can only be used as ...

  • Axis Communications P3346 - page 63

    AXIS P3346 Fixed Dome Network Camera T echnical Specifications Audio Input Audio Output 1 Tip Microphone/Line in 2 Ring Line out (mono) 3 Sleeve Ground Ground SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0. P erformance Considerations When settings up your s ...

  • Axis Communications P3346 - page 64

    User Manual V er . M3.5 AXIS P3346 Fixed Dome Network Camera Date: December 2013 © Axis Communications AB, 20 13 P art No. 54956 ...

Manufacturer Axis Communications Category Security Camera

Documents that we receive from a manufacturer of a Axis Communications P3346 can be divided into several groups. They are, among others:
- Axis Communications technical drawings
- P3346 manuals
- Axis Communications product data sheets
- information booklets
- or energy labels Axis Communications P3346
All of them are important, but the most important information from the point of view of use of the device are in the user manual Axis Communications P3346.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Axis Communications P3346, service manual, brief instructions and user manuals Axis Communications P3346. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Axis Communications P3346.

Similar manuals

A complete manual for the device Axis Communications P3346, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Axis Communications P3346 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Axis Communications P3346.

A complete Axis Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Axis Communications P3346 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Axis Communications P3346, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Axis Communications P3346, that we can find in the current document
3. Tips how to use the basic functions of the device Axis Communications P3346 - which should help us in our first steps of using Axis Communications P3346
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Axis Communications P3346
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Axis Communications P3346 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Axis Communications P3346?

Use the form below

If you did not solve your problem by using a manual Axis Communications P3346, ask a question using the form below. If a user had a similar problem with Axis Communications P3346 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)