English dropdown-ico

Manual Graco 295616

24 pages 3.74 mb
Download

Go to site of 24

Summary
  • Graco 295616 - page 1

    Instructions T2 2:1 Ratio Transfer Pump For use with polyurethane foam, polyurea, and si milar non-flammabl e materials. For professional use only. Not for us e in ex plosive at mospheres. Model 295616 (55-gall on drum) 180 psi (1.2 MP a, 12 bar) M aximu m Air Wor king Pres sure 405 p si (2.7 MP a, 27 ba r) Maximu m Fluid Worki ng Pressu re Im port ...

  • Graco 295616 - page 2

    Warnings 2 311882T Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Moisture Sensit ivity of Isocy anates . . . . . . . . . . . . 4 Isocyan ate Hazard . . . . . . . . . . . . . . . . . . . . . . . 4 Foam Self- Ignition . . . . . . . . . . . . . . . . . . . . . . . . 4 Keep C omponents A and B Separa te . . . . . ...

  • Graco 295616 - page 3

    Warn ings 311882T 3 EQU IPMENT MIS USE HAZ ARD Misus e can cau se death o r seri ous injur y. • Do not operate th e unit when fatigu ed or unde r the inf luence of drugs or a lcohol. • Do not exceed t he maximu m working p ressure or temper ature rati ng of th e lowest rate d syste m compone nt. See Technic al Data in al l equipme nt manu als. ...

  • Graco 295616 - page 4

    Moistu re Sensitiv ity o f Isocya nates 4 311882T Moistu re Sensit ivity of Isocy anates Isocyan ates (IS O) ar e catalysts used in two co mponent foam a nd polyu rea coa tings. ISO wil l reac t with moi sture (such as hu midity) to form sm all, hard, ab rasive cry stals, which bec ome sus pended in the flu id. Even tually a film will form o n the ...

  • Graco 295616 - page 5

    Typica l Insta llatio n 311882T 5 Typical Installation Typical Installat ion, witho ut Circulation Key for F IG . 1 A React or Proport ioner B Hea ted H ose C Fluid Te mperat ure Sensor ( FTS) D Hea ted W hip Hose E Fusion Spray Gun F Proportion er and Gun Air Sup ply Hose G Feed Pump Ai r Supply Li nes (3/8 i n. (76 mm ) ID min. H Waste Containe r ...

  • Graco 295616 - page 6

    Typ ical I nst allat ion 6 311882T Typical Installat ion, with Circu lation Key for F IG . 2 A React or Proport ioner B Hea ted H ose C Fluid Te mperat ure Sensor ( FTS) D Hea ted W hip Hose E Fusion Spray Gun F Proportion er and Gun Air Sup ply Hose G Feed Pump Air Su pply Lines (3/8 in. (76 mm) I D min) J Fluid Supply Lines K Feed Pumps L Agitato ...

  • Graco 295616 - page 7

    Typica l Insta llatio n 311882T 7 Typical Installat ion for Lub rication Applicat ions Key for F IG . 3 A Pum p Ai r Regu lat or B Air Li ne Lub ricator C Air Li ne Filt er D Bleed-Ty pe Master Air Valv e (required , for pum p) E Fluid Dr ain Valv e (required ) F Bung Adap ter G Grounded Air Ho se H Grounded Fluid Hose J Pump Flui d Inlet K 1/4 npt ...

  • Graco 295616 - page 8

    Inst allation 8 311882T Installa tion System Accessories To ens ure maximu m pump performan ce, be sure t hat all access ories used a re prop erly siz ed to me et you r sys- tem’s requ ireme nts. See Accessor ies , page 20. Air Line Accessories Install t he foll owing ac cessorie s in t he order shown in the Typical Installation for Lubricat ion ...

  • Graco 295616 - page 9

    Setup 311882T 9 Setup 1. Apply th read sea lant to the male t hread s of the ai r needle v alve (4 8) and the quick d isconnect fitting (49) and i nstall. S ee F IG . 4 2. Apply th read sea lant to the male o utlet fitti ng (not supplie d) and insert into th e outle t port. Se e F IG . 5. 3. Use labels (70 ) prov ided to id entify the appro priate ...

  • Graco 295616 - page 10

    Setup 10 311882T 5. Install a ir line (3/8 in. (76 m m) ID m inimum) wi th quick dis connec t air c oupler (52) prov ided. S ee F IG . 8. Grounding the System To redu ce the r isk of stati c spar king, gr ound th e pump and all o ther equi pment u sed or loc ated in the pumpi ng area. Chec k your l ocal ele ctrical code for detai led groundi ng ins ...

  • Graco 295616 - page 11

    Operatio n 311882T 11 Operation Pressure Relief Procedure 1. Engag e trigger l ock. 2. Close the bleed-type maste r air valve . 3. Disengag e the trig ger loc k. 4. Hold a meta l part of the dis pense v alve firml y to a grounded metal pail. Tri gger the v alve to relieve pressu re. 5. Engag e the trig ger lock. 6. Open all fluid drai n valve s in ...

  • Graco 295616 - page 12

    Air Motor Repair 12 311882T Air Motor Repair 1. Remove c ap (1), cylinde r (4), and squar e gaske ts (3*). In spect al l part s, incl uding sp ring under ca p (not show n in F IG . 10) fo r damage and repl ace if necessar y. See F IG . 10. U nscrew by hand or u se a chain wr ench to p revent di stortio n of the cylinder ’s shape . NOTE: Cap (1) w ...

  • Graco 295616 - page 13

    Air Motor Repair 311882T 13 4. Align s lot of shi eld (75 ) with pis ton ho le and pl ace pin tool ( 69) in piston ho le to p revent pi ston fro m turning. Use sec ond pin too l (69) to unscrew p iston cap (17 ) and sep arate fr om piston (21) to expose dowel p in (19). S ee F IG . 13. 5. Remove do wel pin ( 19) and ta ke pist on cap (17) off trans ...

  • Graco 295616 - page 14

    Pump Low er Rep air 14 311882T Pump Lower Repair 1. Use a chain wr ench near the top of the suction tu be at the p oint indi cated in F IG . 16, and a wrench on the flat s of the fo ot valve (45) to loo sen th e foot valve fr om the s uctio n tube (44 ). To prev ent da m- age to the s uction t ube, do not remove t he foot valve u ntil i nstruc ted ...

  • Graco 295616 - page 15

    Pump Lower Repair 311882T 15 7. Pull tra nsfer sh aft (20) out the bo ttom of pum p body (34). See F IG . 19. 8. Remove pi n (56). Remove piston v alve as sembly . Unscrew piston valve ( 43) from pisto n housin g (53). Remove wea r ring (4 1*), u- cup (40* ) and ball ( 42). Inspect a ll parts fo r damage . See F IG . 20 . 9. Remo ve pins (55). Se e ...

  • Graco 295616 - page 16

    Pump Low er Rep air 16 311882T 11. Unscrew mounti ng flange (26) from pum p body (34). Remov e o-ring ( 32*) an d PTFE g asket (33* ) from pum p body (3 4). Insp ect al l parts for damag e. See F IG . 23. NOTE: Align a bottom sl ot of the shie ld (75) and use pin tool (69) to l oosen th e hex nu t/packin gs from the pump shaf t. 12. Remove he x nut ...

  • Graco 295616 - page 17

    Reas sembly 311882T 17 Reassembl y To reass emble the pump l ower and a ir motor, rev erse the st eps on the preceding pages. Follow t he torque requireme nts lis ted in the Par ts - Model 295616 draw- ing on page 18. Troubleshoot ing NOTE : See Air Moto r Repair , step 3 and st ep 4 (F IG . 12) for sp ecial not es on rea ssembly. Problem Cause Sol ...

  • Graco 295616 - page 18

    Parts - Mo del 295616 18 311882T Parts - Mode l 295616 WLE 4 2 *3 1 *32 *28 *29 *30 27 25 24* 23 22 21 *33 60 53 56 ✓ 37 36 39 34 42 ✓ 43 44 46 47 71 38 ✓ 45 41 ✓ 40 ✓ ❄ 54 38 ✓ 31* 26 72 51b 51c ✓ 51a 51 Bung Adapt er Lubricate all o-rings and s eals before and after assembly Torque to 45-55 ft-lbs ( 61-74.5 N•m) T ...

  • Graco 295616 - page 19

    Parts - Model 29561 6 311882T 19 NOTE: The T2 can be adapte d for u se in 250 gallon (946 l iter) to tes. Tub e Extens ion 24N451 incr eases t he length b y 6.25 in . (165 mm) to reac h mate rial in the bot- tom o f larger tot es. Ref Part Descri ption Qty 1 ‡ 16V524 CAP, air cy linder 1 2 ‡ 157630 SPRING, tape red 1 3 ‡ * 120212 PACKING, s q ...

  • Graco 295616 - page 20

    Acce ssories 20 311882T Accessories Grounding Clamp Bleed-Type Master Air Val ve 300 psi (2.1 MPa, 21 bar) Maximum Worki ng Pressure Air Line Filter 250 psi (1.7 MPa, 17.5 bar) Maximum Working Pressure Air Line Lub ricator 250 psi (1.7 MPa, 17.5 bar) Maxi mum Working Pressure Air Line Filter and Regulator 180 psi (1.3 MPa, 13 bar) Maximum Working P ...

  • Graco 295616 - page 21

    Acce ssori es 311882T 21 Air Regulator and Gauge 300 psi (2.1 MPa, 21 bar) Maximum Worki ng Pressure Fluid Drain Valve 500 psi (3.5 MPa, 35 bar) Maximum Working Pressure Part Des criptio n Qty . 202156 REGULA TOR, air; 0-200 ps i (0-14 bar ) regula ted pressur e range ; 3/8 npt (f) inlet and ou tlet 1 Part Desc ription Qty . 208630 VALVE, b all; 1/ ...

  • Graco 295616 - page 22

    Technic al Data 22 311882T Technical Da ta Dimensions T2 2:1 Rat io Transfer P ump US Metric Pressur e Ratio 2.25:1 Max fluid wo rking p ressure 405 psi 2.8 MPa, 2 8 bar Maximum Air in let pres sure 180 psi 1.2 MP a, 12 bar Max Out put Flow (c ontinuous ) 5.0 GPM 20 lp m Max Out put Flow (i ntermitte nt 7.5 GPM 28 lp m Pump cy cles pe r 1 gallon ( ...

  • Graco 295616 - page 23

    Technica l Data 311882T 23 Performance Chart Calculate Fluid Out let Pressu re (black curv es) To ca lcul ate fluid outlet pr essure (MPa/b ar/psi) at a spe- cific f luid flow (lpm/gpm ) and oper ating ai r pressu re (MPa/ba r/psi) , use the fo llowing i nstruct ions and pump data char t. 1. Locate de sired fl uid flow a long botto m of ch art. 2. ...

  • Graco 295616 - page 24

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco rese rves the right to make changes at any t ime without notice. Original instructions. This manual contains English. MM 311882 Graco H eadquarters: Min neapolis International O ffices: Belgium, China, Japan, K ...

Manufacturer Graco Category Marine Sanitation System

Documents that we receive from a manufacturer of a Graco 295616 can be divided into several groups. They are, among others:
- Graco technical drawings
- 295616 manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 295616
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 295616.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 295616, service manual, brief instructions and user manuals Graco 295616. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 295616.

Similar manuals

A complete manual for the device Graco 295616, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 295616 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 295616.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 295616 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 295616, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 295616, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 295616 - which should help us in our first steps of using Graco 295616
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 295616
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 295616 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 295616?

Use the form below

If you did not solve your problem by using a manual Graco 295616, ask a question using the form below. If a user had a similar problem with Graco 295616 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)