English dropdown-ico

Manual Roland GW-8

10 pages 0.26 mb
Download

Go to site of 10

Summary
  • Roland GW-8 - page 1

    1 Copyright © 2008 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 1PS Model: GW-8 Date: 2008. 8. 1 Version: 1.00 MIDI Implementation 1. Receive data ■ Channel Voice Messages * Not received when the MIDI Rx Switch parameter (SYSTEM MIDI) is OF ...

  • Roland GW-8 - page 2

    2 MIDI Implementation ❍ Vibrato Rate (Controller number 76) Status 2nd byte 3rd byte BnH 4CH vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Vibrato Rate value (relative change) : 00H - 40H - 7FH (-64 - 0 - +63) * The Vibrato Rate parameter (Perform Tone Edit) will change. ❍ Vibrato Depth (Controller number 77) Status 2nd byte 3rd byte Bn ...

  • Roland GW-8 - page 3

    3 MIDI Implementation ■ Channel Mode Messages * Not received when the MIDI Rx Switch parameter (SYSTEM MIDI) is OFF. ● All Sounds Off (Controller number 120) Status 2nd byte 3rd byte BnH 78H 00H n = MIDI channel number: 0H - FH (ch.1 - 16) * When this message is received, all notes currently sounding on the corresponding channel will be turned ...

  • Roland GW-8 - page 4

    4 MIDI Implementation ● Universal Non-realtime System Exclusive Messages ❍ Identity Request Message Status Data byte Status F0H 7EH, dev, 06H, 01H F7H Byte Explanation F0H Exclusive status 7EH ID number (Universal Non-realtime Message) dev Device ID (dev: 10H - 1FH, 7FH) 06H Sub ID#1 (General Information) 01H Sub ID#2 (Identity Request) F7H EOX ...

  • Roland GW-8 - page 5

    5 MIDI Implementation ❍ Chorus Parameters Status Data byte Status F0H 7FH, 7FH, 04H, 05H, 01H, 01H, F7H 01H, 01H, 02H, ppH, vvH Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH Device ID (Broadcast) 04H Sub ID#1 (Device Control) 05H Sub ID#2 (Global Parameter Control) 01H Slot path length 01H Parameter ID width ...

  • Roland GW-8 - page 6

    6 MIDI Implementation ❍ Key-based Instrument Controllers Status Data byte Status F0H 7FH, 7FH, 0AH, 01H, 0nH, kkH, nnH, vvH F7H Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH Device ID (Broadcast) 0AH Sub ID#1 (Key-Based Instrument Control) 01H Sub ID#2 (Controller) 0nH MIDI Channel (00 - 0FH) kkH Key Number ...

  • Roland GW-8 - page 7

    7 MIDI Implementation ❍ Hold 1 (Controller number 64) Status 2nd byte 3rd byte BnH 40H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON ❍ Portamento (Controller number 65) Status 2nd byte 3rd byte BnH 41H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv = Control value: 00H - 7F ...

  • Roland GW-8 - page 8

    8 MIDI Implementation ● Song/Style Start Status FAH * Not transmitted when the Tx Start/Stop parameter (SYSTEM MIDI) is OFF. * This message is transmitted when the song/style player is started. ● Song Continue Status FBH * Not transmitted when the Tx Start/Stop parameter (SYSTEM MIDI) is OFF. * This message is transmitted when the song player i ...

  • Roland GW-8 - page 9

    9 MIDI Implementation 4. Supplementary Material ■ Decimal and Hexadecimal Table (An "H" is appended to the end of numbers in hexadecimal notation.) In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are expressed as hexadecimal values for each 7 bits. The following table shows how these correspond to deci ...

  • Roland GW-8 - page 10

    10 MIDI Implementation ■ Example of an Exclusive Message and Calculating a Checksum Roland Exclusive messages are transmitted with a checksum at the end (before F7) to make sure that the message was correctly received. The value of the checksum is determined by the address and data (or size) of the transmitted Exclusive message. ● How to calcul ...

Manufacturer Roland Category Electronic Keyboard

Documents that we receive from a manufacturer of a Roland GW-8 can be divided into several groups. They are, among others:
- Roland technical drawings
- GW-8 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland GW-8
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland GW-8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland GW-8, service manual, brief instructions and user manuals Roland GW-8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland GW-8.

Similar manuals

A complete manual for the device Roland GW-8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland GW-8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland GW-8.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland GW-8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland GW-8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland GW-8, that we can find in the current document
3. Tips how to use the basic functions of the device Roland GW-8 - which should help us in our first steps of using Roland GW-8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland GW-8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland GW-8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland GW-8?

Use the form below

If you did not solve your problem by using a manual Roland GW-8, ask a question using the form below. If a user had a similar problem with Roland GW-8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)