-
Heat Controller DMC24SB-1 - page 1
Wall Mounted Mini-Split System Single-Zone Air Conditioning/Heat Pump Service Manual DMC09SB-0/DMH09SB-0 DMC12SB-0/DMH12SB-0 DMC18SB-1/DMH18SB-1 DMC24SB-1/DMH24SB-1 Befor e servicing the unit, r ead the “safety pr ecautions” in this manual. Only for authorized service personnel. HEA T CONTR OLLER, INC. ...
-
Heat Controller DMC24SB-1 - page 2
2 Room Air Conditioner Air Conditioner Ser vice Manual T ABLE OF CONTENTS Safety Precautions .......................................................................................................................................... 3 Dimensions ......................................................................................................... ...
-
Heat Controller DMC24SB-1 - page 3
Ser vice Manual 3 Saf ety Precautions Safety Precautions T o pre v ent injur y to the user or other people and proper ty damage, the f ollo wing instructions must be f ollow ed. ■ Incorrect operation due to ignoring instruction will cause har m or damage. The seriousness is classified by the f ollowing indications . ■ Meanings of symbols used i ...
-
Heat Controller DMC24SB-1 - page 4
4 Room Air Conditioner Saf ety Precautions ■ Operation Be sure the installation area does not deteriorate with age. • If the base collapses , the air condi- tioner could f all with it, causing prop- er ty damage, product f ailure, and personal injur y . Install the indoor unit on the wall where the height from the floor s more than 8ft(2.4m) ? ...
-
Heat Controller DMC24SB-1 - page 5
Ser vice Manual 5 Saf ety Precautions Stop operation and close an y win- dow in storm or hurricane bef ore the hurricane arrives. • There is risk of proper ty damage, f ailure of product, or electric shock. Do not open the inlet grill of the product during operation. (Do not touch the electr ostatic filter , if the unit is so equipped.) • There ...
-
Heat Controller DMC24SB-1 - page 6
6 Room Air Conditioner Saf ety Precautions Alwa ys chec k f or gas(refrigerant) leakage after installation or repair of product. • Lo w refrigerant le vels ma y cause product f ailure. Install the drain hose to ensure that water is drained awa y pr operly . • A bad connection ma y cause water leakage. Keep le vel even when installing the produc ...
-
Heat Controller DMC24SB-1 - page 7
Ser vice Manual 7 Saf ety Precautions Use a soft cloth to c lean. Do not use harsh deter gents, sol- vents, etc. • There is risk of fire, electric shock or damage to the plastic par ts of the product. Do not touch the metal parts of the product when remo ving the air fil- ter . They are very sharp! • There is risk of personal injur y . Do not s ...
-
Heat Controller DMC24SB-1 - page 8
8 Room Air Conditioner Dimensions Dimensions D H W Installation plate W mm(inch) 840(33.1) 894(35.2) 894(35.2) H mm(inch) 270(10.6) 295(11.6) 295(11.6) D mm(inch) 153(6.0) 165(6.5) 165(6.5) Model Dimension 9 Btu Series (C/O) 9 Btu Series (H/P) 12 Btu Series Indoor Unit ...
-
Heat Controller DMC24SB-1 - page 9
Ser vice Manual 9 Dimensions D H W Installation plate W mm(inch) 1090(42.9) 1090(42.9) H mm(inch) 300(11.8) 300(11.8) D mm(inch) 178(7.0) 178(7.0) Model Dimension 18 Btu Series 24 Btu Series ...
-
Heat Controller DMC24SB-1 - page 10
10 Room Air Conditioner Dimensions Outdoor Unit 1. 9k, 12k W L2 L3 L1 D H L4 L5 Gas side (3-way valve) Liquid side (2-way valve) MODEL 9k, 12k DIM unit W mm(inch) 770(30.3) H mm(inch) 540(21.3) D mm(inch) 245(9.6) L1 mm(inch) 287(11.3) L2 mm(inch) 64(2.5) L3 mm(inch) 518(20.4) L4 mm(inch) 10(0.4) L5 mm(inch) 100(3.9) ...
-
Heat Controller DMC24SB-1 - page 11
Ser vice Manual 11 Dimensions 2. 18k, 24k W L6 L5 L7 L8 D L1 L2 L9 L10 L3 L4 H MODEL 18k, 24k DIM W mm(inch) 870(34.3) H mm(inch) 655(25.8) D mm(inch) 320(12.6) L1 mm(inch) 370(14.6) L2 mm(inch) 25(1.0) L3 mm(inch) 630(24.8) L4 mm(inch) 25(1.0) L5 mm(inch) 546(21.5) L6 mm(inch) 162(6.4) L7 mm(inch) 162(6.4) L8 mm(inch) 54(2.1) L9 mm(inch) 74.5(2.9) ...
-
Heat Controller DMC24SB-1 - page 12
12 Room Air Conditioner Introduction Intr oduction This symbol alerts you to the risk of electric shoc k. This symbol alerts you to hazar ds that may cause harm to the air condi- tioner . This symbol indicates special notes. NOTICE Symbols Used In This Manual Features Air Intake Vents Air Outlet Vents Connecting Wires Piping Drain Hose Base Plate A ...
-
Heat Controller DMC24SB-1 - page 13
Ser vice Manual 13 Introduction Type "A" screw and plastic anchor Type "B" screw Remote Control Holder Installation plate Figure Figure Name Screw driver Electric Drill Measuring Tape, Knife Hole Core Drill Spanner Torque wrench Ohmmeter Hexagonal wrench Ammeter Gas Leak Detector Thermometer, Level Flaring Tool Set Name Installa ...
-
Heat Controller DMC24SB-1 - page 14
14 Room Air Conditioner Installation Installation Map Base Plate Air Inlet Vents Air Outlet Vents Installation parts you should purchase. Air Discharge Forced Operation Button Operation Indication Lamps/ Signal Receptor Vinyl tape (Wide) • Apply after carrying out a drainage test. • To carry out the drainage test, remove the air filters and pou ...
-
Heat Controller DMC24SB-1 - page 15
Ser vice Manual 15 Installation 1. Check the quality label on the indoor and outdoor unit. 2. Make certain that the refr igerant is R-410A. THIS PRODUCT CONT AINS R-410A REFRIGERANT 1) Diff erent compressor oil - R-410A(P olyol ester) / R-22(Mineral). - Do not mix the e xisting mineral oil. - Do not apply used pipe, tools and gauges co v ered with ...
-
Heat Controller DMC24SB-1 - page 16
16 Room Air Conditioner Outdoor unit 1. If an a wning is built o v er the unit to pre v ent direct sunlight or rain e xposure, make sure that heat radiation from the condenser is not restricted. 2. Ensure that the space around the bac k and sides is more than 10cm(3.9in). The front of the unit should hav e more than 70cm(27.6in) of space. 3. Do not ...
-
Heat Controller DMC24SB-1 - page 17
Ser vice Manual 17 Piping Length And Elev ation • Capacity is based on standard length and maximum allo wance length is on the basis of reliability . • Oil trap should be installed e ver y 5~7meters (16.4~23.0ft). In case more than 5m(16.4ft) Outdoor unit Indoor unit A B A Oil trap Outdoor unit Indoor unit B Pipe Size Capacity (Btu/h) Suction E ...
-
Heat Controller DMC24SB-1 - page 18
18 Room Air Conditioner The wall y ou select should be strong and solid enough to pre v ent vibration 1. Mount the installation plate on the wall with type "A" screws . If mounting the unit on a concrete wall, use anchor bolts . • Mount the installation plate horizontally b y aligning the centerline using a lev el. How T o Mount Install ...
-
Heat Controller DMC24SB-1 - page 19
Ser vice Manual 19 Flaring W ork Cut the pipes and the cable. 1. Use the piping kit accessor y or the pipes purchased locally . 2. Measure the distance between the indoor and the out- door unit. 3. Cut the pipes a little longer than measured distance. 4. Cut the cable 1.5m(59.1in) longer than the pipe length. Burrs remo val 1. Completely remov e al ...
-
Heat Controller DMC24SB-1 - page 20
20 Room Air Conditioner Indoor 1. Prepare the indoor unit's piping and drain hose f or installation through the wall. 2. Remo ve the plastic tubing retainer(see the illus- tration b y) and pull the tubing and drain hose aw a y from chassis. 3. Replace only the plastic tubing holder 1, not the holder 2 in the original position. Route the indoor ...
-
Heat Controller DMC24SB-1 - page 21
Ser vice Manual 21 Wrap the insulation material around the connecting portion. • Ov erlap the connection pipe insulation mater ial and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there is no gap . Route the indoor tubing and the drain hose to the required piping hole position. Plastic bands Insulation mate ...
-
Heat Controller DMC24SB-1 - page 22
22 Room Air Conditioner Insert the connecting cable into the indoor unit. • Don't connect the cable to the indoor unit. • Make a small loop with the cab le for easy con- nection later . T ape the drain hose and the connecting cable . • Connecting cable Connecting the pipings to the indoor unit and the drain hose to drain pipe. • Put a ...
-
Heat Controller DMC24SB-1 - page 23
Ser vice Manual 23 Reroute the pipings and the drain hose across the bac k of the chassis. Reroute the pipings and the drain hose across the bac k of the chassis. Drain hose Vinyl tape(narrow) Pipe Wrap with vinyl tape(wide) • Bundle the piping and drain hose together b y wrapping them with cloth tape o ver the r ange within which they fit into t ...
-
Heat Controller DMC24SB-1 - page 24
24 Room Air Conditioner Installation Inf or mation. F or left piping. F ollow the instruction below . Correct case • Press on the upper side of clamp and unf old the tubing to downw ard slowly . Incorrect case • F ollowing bending type from right to left ma y cause damage to the tubing. Installation ...
-
Heat Controller DMC24SB-1 - page 25
Ser vice Manual 25 Put a couple drops of refrigerant oil on the face of the flare before assemb ling taking care not to add an y contaminants. Align the center of the pipings and suffi- ciently tighten the flare n ut by hand. • The drain hose can be connected at tw o diff erent positions. Use the most con v enient position and, if necessar y , e ...
-
Heat Controller DMC24SB-1 - page 26
26 Room Air Conditioner Connection Of The Cable 1 Indoor Unit Outdoor Unit 2 3 4 1 2 3 4 5 6 G To branch circuit Ground P ower supply a L1 * L2 Connecting cable(Lo w voltage) b T erminal (4P) T erminal (6P) Outdoor unit Wiring Diagram T er minal b lock Over 5mm (0.2") Cov er control Conduit panel Connecting cable P ower supply cord * L1 is neu ...
-
Heat Controller DMC24SB-1 - page 27
Ser vice Manual 27 After the confir mation of the abov e conditions, prepare the wiring as follo ws: 1) Never fail to ha ve an individual po wer cir cuit specifically for the air conditioner . As for the method of wiring, be guided by the cir cuit diagram posted on the inside of control co ver . 2) The screw whic h fasten the wiring in the casing o ...
-
Heat Controller DMC24SB-1 - page 28
28 Room Air Conditioner Chec king The Drainage • P our a glass of water on the drain pan. • Ensure the water flo ws through the drain hose of the indoor unit without an y leakage and goes out the drain e xit. Drain piping • The drain hose should point do wnward f or easy drain flow . Drain pan Drain hose Leakage checking Connecting area drain ...
-
Heat Controller DMC24SB-1 - page 29
Ser vice Manual 29 Forming The Piping Form the piping by wrapping the connect- ing portion of the indoor unit with insula- tion material and secure it with two kinds of vinyl tapes. • If you w ant to connect an additional drain hose , the end of the drain outlet should be routed abov e the ground. Secure the drain hose appro- priately . In cases ...
-
Heat Controller DMC24SB-1 - page 30
30 Room Air Conditioner Air Purging Air purging With V acuum Pump Lo Hi Indoor unit Outdoor unit Manifold valve Charge hose Nitrogen gas cylinder(in vertical standing position) Pressure gauge Air and moisture remaining in the refrigerant system hav e undesirable eff ects as indicated below . • Pressure in the system rises. • Operating current r ...
-
Heat Controller DMC24SB-1 - page 31
Ser vice Manual 31 Ev acuation • Connect the charge hose end described in the preceding steps to the v acuum pump to e vacuate the tubing and indoor unit. Confir m the "Lo" knob of the manif old v alv e is open. Then, run the vacuum pump . The operation time f or ev acuation v aries with tub- ing length and capacity of the pump . The f ...
-
Heat Controller DMC24SB-1 - page 32
32 Room Air Conditioner Charging ■ Each outdoor unit is f actor y charged (nameplate charge) f or the e v aporator as well as a 7.5m(25ft) line set. Any time a line set is used either shor ter or longer then the nominal 7.5m(25ft) line set length the refrigerant charge has to be adjusted. ■ Whether the line set is made shor ter or longer you mu ...
-
Heat Controller DMC24SB-1 - page 33
Ser vice Manual 33 Outside ambient TEMP. The pressure of the gas side service valve 95°F(35°C) 8.5~9.5kg/cm 2 G(120~135 P.S.I.G.) Settlement of outdoor unit ■ Anchor the outdoor unit with a bolt and nut(ø10mm(0.39in) tightly and horizontally on a concrete or rigid mount. ■ When installing on the wall, roof or rooftop , anchor the mounting ba ...
-
Heat Controller DMC24SB-1 - page 34
Operation Function of Contr ols Operation • DISPLA Y 1) C/O Model Operation Indicator • ON while in appliance operation, OFF while in appliance pause . • Flashing while in disconnection or shor t in Ther mistor . (3 sec off / 0.5 sec on) Timer Indicator • ON while in timer mode (on/off), OFF when timer mode is completed or canceled. Comp. R ...
-
Heat Controller DMC24SB-1 - page 35
Ser vice Manual 35 Operation • While in compressor off , the indoor f an repeats low airflow speed and pause. • While the intak e air temp is between compressor on temp . and compressor off temp., 10-min dehu- midification operation and 4-min compressor off repeat. Compressor ON T emp . ➲ Setting T emp+0.5°C(0.9°F) Compressor OFF T emp . ? ...
-
Heat Controller DMC24SB-1 - page 36
36 Room Air Conditioner ■ Airflow Speed Selection • The airflo w speed of the indoor f an is set to high, medium, low , or chaos (auto) by the input of the airflow speed selection k e y on the remote control. ■ Sleep Timer Operation • When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input b y the remote control whi ...
-
Heat Controller DMC24SB-1 - page 37
Ser vice Manual 37 Operation ■ Forced operation • Operation procedures when the remote control can't be used. • The operation will be star ted if the pow er button is pressed. • If you w ant to stop operation, re-press the b utton. • While in f orced operation, the ke y input by the remote control has no eff ect and the buzz er sound ...
-
Heat Controller DMC24SB-1 - page 38
38 Room Air Conditioner Self-diagnosis Function Displa y Function 1. Heating Model 2. Cooling Model • Cooling, Soft Dry, Fan, Heating • Cooling, Soft Dry, Fan • Hot-start, Deice Operation Indicator Deicer Indicator Operation Indicator Compressor on Indicator 3sec 3sec 3sec (once) Error Code 1 Error Displa y LED (Indoor body operation LED) Err ...
-
Heat Controller DMC24SB-1 - page 39
Ser vice Manual 39 Operation Remote Contr ol Operations The controls will look like the f ollowing. 1. ST ART/ST OP BUTT ON Operation star ts when this button is pressed and stops when the button is pressed again. 2. OPERA TION MODE SELECTION BUTT ON Used to select the operation mode . 3. ROOM TEMPERA TURE SETTING BUTT ONS Used to select the room t ...
-
Heat Controller DMC24SB-1 - page 40
40 Room Air Conditioner Disassembl y Indoor Unit Disconnect the unit from power supply before mak- ing any checks. Be sure the power switch is set to “ OFF ” . To remove the Grille from the Chassis. • Set the up-and-down air discharge louver to open position (horizontally) by finger pressure. • Remove the securing screws. • To remove the ...
-
Heat Controller DMC24SB-1 - page 41
Ser vice Manual 41 Disassembly 2. T o remove the Contr ol Bo x. • Remove securing screws. • Pull the control box out from the chassis carefully. 3. T o remove the Disc harge Grille. • Unhook the discharge grille and pull the discharge grille out from the chassis carefully. 4. T o remove the Ev aporator . • Remove 3 screws securing the evapo ...
-
Heat Controller DMC24SB-1 - page 42
42 Room Air Conditioner • Unhook the tab on the right inside of the chassis at the same time, slightly pull the evaporator toward you until the tab is clear of the slot. 5. T o remove the Motor Co ver • Remove 2 securing screw. • Pull the motor cover out from the chassis carefully. 6. T o remove the Cr oss-Flow Fan • Loosen the screw securi ...
-
Heat Controller DMC24SB-1 - page 43
Ser vice Manual 43 T roubleshooting Guide T r oub leshooting Guide INDOOR UNIT OUTDOOR UNIT INDOOR UNIT OUTDOOR UNIT HEAT EXCHANGE (EVAPORATOR) HEAT EXCHANGE (EVAPORATOR) HEAT EXCHANGE (CONDENSER) HEAT EXCHANGE (CONDENSER) COMPRESSOR COMPRESSOR ACCUMU LATOR GAS SIDE GAS SIDE 3-WAY VALVE LIQUID SIDE LIQUID SIDE 3-WAY VALVE CAPILLARY TUBE CAPILLARY T ...
-
Heat Controller DMC24SB-1 - page 44
44 Room Air Conditioner T roubleshooting Guide 2-wa y , 3-way V alve 2-way Valve (Liquid Side) 3-way Valve (Gas Side) Shaft position Shaft position Service port Closed Closed Closed (with valve cap) (with valve cap) (with cap) Open Closed Open (counter-clockwise) (clockwise) (push-pin or with vacumm pump) Open Open Closed (with valve cap) (with val ...
-
Heat Controller DMC24SB-1 - page 45
Ser vice Manual 45 T roubleshooting Guide • Procedure (1) Confirm that both the 2-way and 3-way valves are set to the open position. – Remove the v alve stem caps and confirm that the v alve stems are in the r aised posi- tion. – Be sure to use a he xagonal wrench to operate the v alv e stems. (2) Operate the unit for 10 to 15 minutes. (3) St ...
-
Heat Controller DMC24SB-1 - page 46
46 Room Air Conditioner T roubleshooting Guide Balance Refrigerant of the 3-way V alve (Gas leakage) • Procedure (1) Confirm that both the 2-way and 3-way valves are set to the bac k seat. (2) Connect the charge set to the 3-way valve ’ s por t. – Leav e the valv e on the charge set closed. – Connect the charge hose to the ser vice por t. ( ...
-
Heat Controller DMC24SB-1 - page 47
Ser vice Manual 47 T roubleshooting Guide Ev acuation (All amount of refrigerant leaked) • Procedure (1) Connect the vacuum pump to the center hose of char ge set center hose (2) Evacuation for appr oximatel y one hour . – Confir m that the gauge needle has mov ed tow ard -76 cmHg (v acuum of 4 mmHg or less). (3) Close the valve (Lo side) on th ...
-
Heat Controller DMC24SB-1 - page 48
48 Room Air Conditioner T roubleshooting Guide Gas Charging (After Evacuation) • Procedure (1) Connect the charge hose to the charging cylinder . – Connect the charge hose which you dis- connected from the v acuum pump to the v alve at the bottom of the cylinder . – If y ou are using a gas cylinder , also use a scale and re v erse the cylinde ...
-
Heat Controller DMC24SB-1 - page 49
Ser vice Manual 49 T roubleshooting Guide Additional gas c harging (Gas leakage) • When refrigerant is insufficient b y leakage, recharge the unit with the refrigerant up to normal oper- ating suction pressure. • Use the gr aph or the equation below to get oper ating suction pressure according to indoor and out- door temperature . Suction press ...
-
Heat Controller DMC24SB-1 - page 50
50 Room Air Conditioner T roubleshooting Guide T rouble anal ysis 1. Check temperature diff erence between intake and discharge air and operating current. Temp. Difference Temp. difference : approx. 0°F(0°C) Current : less than 80% of rated current Temp. difference : approx. 14°F(8°C) Current : less than 80% of rated current Temp. difference : ...
-
Heat Controller DMC24SB-1 - page 51
Ser vice Manual 51 T roubleshooting Guide Electr onic P ar ts (9k model) Pr oduct does not operate at all. (* Refer to Electr onic Contr ol Device dra wing and Schematic diagram.) Turn off Main Power Turn on Main Power Does "beeping" sound is made from the Indoor Unit? Primarily, the operating condition of Micom is OK. Check the voltage o ...
-
Heat Controller DMC24SB-1 - page 52
52 Room Air Conditioner T roubleshooting Guide Electr onic P ar ts (18k model) Pr oduct does not operate at all. (* Refer to Electr onic Contr ol Device dra wing and Schematic diagram.) Turn off Main Power Turn on Main Power Does "beeping" sound is made from the Indoor Unit? Primarily, the operating condition of Micom is OK. Check the vol ...
-
Heat Controller DMC24SB-1 - page 53
Ser vice Manual 53 T roubleshooting Guide The pr oduct is not operate with the remote controller . Turn on Main Power While the compressor has been stopped, the compressor does not operate owing to the delaying function for 3 minutes after stopped. Caused by other parts except the remote controller Cause by the remote controller When the mark( ) is ...
-
Heat Controller DMC24SB-1 - page 54
54 Room Air Conditioner T roubleshooting Guide Compressor/Outdoor F an are unable to drive.(9k Model) Turn on Main Power Operate "Cooling Mode( )" by setting the desired temperature of the remote controller is less than one of the indoor temperature by 2 ° F at least. When in Fan Mode, Compressor/Outdoor Fan is stopped. Check the sensor ...
-
Heat Controller DMC24SB-1 - page 55
Ser vice Manual 55 T roubleshooting Guide Compressor/Outdoor F an are unable to drive.(18k Model) Turn on Main Power Operate "Cooling Mode( )" by setting the desired temperature of the remote controller is less than one of the indoor temperature by 2 ° F at least. When in Fan Mode, Compressor/Outdoor Fan is stopped. Check the sensor for ...
-
Heat Controller DMC24SB-1 - page 56
56 Room Air Conditioner T roubleshooting Guide When indoor F an does not operate . Check connecting condition of the CN-MOTOR CON- NECTOR Does the voltage of terminal of CN-DC/DC CONNECTOR in Indoor unit corresponds to the values in the table of page 56 Do the voltage of terminal of CN-DC/DC CONNECTOR in Outdoor unit corresponds to the values in th ...
-
Heat Controller DMC24SB-1 - page 57
Ser vice Manual 57 T roubleshooting Guide When V er tical Louver does not operate . • Confirm that the Vertical Louver is normally geared with the shaft of Stepping Motor. • If the regular torque is detected when rotating the Vertical Louver with hands Normal • Check the connecting condition of CN-UP/DOWN Connector • Check the soldering con ...
-
Heat Controller DMC24SB-1 - page 58
58 Room Air Conditioner T roubleshooting Guide • The operation indicator of Indoor unit blinks five times. • The red indicator of Outdoor unit blinks five times. Check the connecting wires between Indoor and Outdoor unit for the connecting error and the contacting condition. Check the installation condition of outdoor unit. Check for the commun ...
-
Heat Controller DMC24SB-1 - page 59
Ser vice Manual 59 T roubleshooting Guide The phenomena in case of connecting err or INDOOR UNIT Connector Type Condition Open and connecting error Open Open Open Open Short between terminals ( and ) of ROOM-TH. Short between terminals ( and ) of PIPE-TH. Short between terminals • The same as the phenomenon of Outdoor Unit. • The up/down vane d ...
-
Heat Controller DMC24SB-1 - page 60
60 Room Air Conditioner OUTDOOR UNIT Connector Type Condition OPEN • PWB pattern is damaged when applying the power. Connecting reversely Connecting reversely OPEN OPEN OPEN OPEN Connecting error ( ) Connecting error ( ) Connecting error ( ) Connecting error ( ) Connecting error ( ) Connecting error ( ) • All functions stop. • The operation w ...
-
Heat Controller DMC24SB-1 - page 61
Ser vice Manual 61 Schematic Diagram Schematic Dia gram Electric Contr ol Device ■ Indoor ...
-
Heat Controller DMC24SB-1 - page 62
62 Room Air Conditioner Schematic Diagram ■ Outdoor (9k, 12k) ...
-
Heat Controller DMC24SB-1 - page 63
Ser vice Manual 63 ■ Outdoor (18k, 24k) Schematic Diagram ...
-
Heat Controller DMC24SB-1 - page 64
64 Room Air Conditioner Schematic Diagram Wiring Diagram ■ Indoor Unit Models: 9k, 12k, 18k, 24k ...
-
Heat Controller DMC24SB-1 - page 65
Ser vice Manual 65 ■ Outdoor Unit Models: 9k(C/O) Models: 12k(H/P), 12k(C/O , H/P) Schematic Diagram ...
-
Heat Controller DMC24SB-1 - page 66
66 Room Air Conditioner Models: 18k(C/O) Models: 18k(H/P), 24k(C/O , H/P) Schematic Diagram ...
-
Heat Controller DMC24SB-1 - page 67
Ser vice Manual 67 Schematic Diagram Components Location ■ Indoor MAIN P .W .B ASSEMBL Y • T OP VIEW • BO TT OM VIEW ...
-
Heat Controller DMC24SB-1 - page 68
68 Room Air Conditioner ■ Outdoor(9k, 12k) • T OP VIEW • BO TT OM VIEW Schematic Diagram ...
-
Heat Controller DMC24SB-1 - page 69
Ser vice Manual 69 Schematic Diagram ■ Outdoor(18k, 24k) • T OP VIEW • BO TT OM VIEW ...
-
Heat Controller DMC24SB-1 - page 70
70 Room Air Conditioner DISPLA Y ASSEMBL Y – 6870A90240D – 6870A90240E Schematic Diagram ...
-
Heat Controller DMC24SB-1 - page 71
Ser vice Manual 71 Product Specifications Pr oduct Specifications Power Supply Ø, V, Hz Cooling Capacity BTU/h Input W Running Current A COMP. Locked Rotor AMP. A S.E.E.R Air Circulation m 3 G/min(cfm) Moisture Removal l/h(pts/hr) Noise Level Indoor, High dB(A) (Sound Pressure, 1m) Med dB(A) Low dB(A) Outdoor, Max dB(A) Features Temperature Contro ...
-
Heat Controller DMC24SB-1 - page 72
72 Room Air Conditioner Product Specifications Cooling & Heating Items Unit DMH09SB-0 DMH12SB-0 DMH18SB-1 DMH24SB-1 Power Supply ø, V, Hz Cooling Capacity BTU/h Heating Capacity BTU/h Input Cooling W Heating W Running Current Cooling A Heating A COMP. Locked Cooling A Rotor AMP. Heating A S.E.E.R H.S.P.E Air Circulation m 3 /min(cfm) Moisture ...
-
Heat Controller DMC24SB-1 - page 73
Specifications and performance data subject to change without notice. HEA T CONTROLLER, INC. 1900 WELL WOR TH A VENUE • JA CKSON, MICHIGAN 49203 THE QU ALITY LEADER IN CONDITIONING AIR P/No.:3828A20390T ...
Do you have a question concerning Heat Controller DMC24SB-1?
Use the form below
If you did not solve your problem by using a manual Heat Controller DMC24SB-1, ask a question using the form below. If a user had a similar problem with Heat Controller DMC24SB-1 it is likely that he will want to share the way to solve it.