English dropdown-ico

Manual Moxa Technologies 5400 Series

104 pages 5.1 mb
Download

Go to site of 104

Summary
  • Moxa Technologies 5400 Series - page 1

    NPort 5400 Series User ’ s Manual Sixth Edition, March 2007 www .moxa.com/product Moxa Technologies Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Web: www.moxa.com MOXA Technical Support World wide: support@ moxa.com The Americas: support@ usa.moxa.com ...

  • Moxa Technologies 5400 Series - page 2

    NPort 5400 Series User’s Manual The software d escribed in t his manual is furnished u nder a license a greement and m ay be used only in accordance with the term s of that agreement. Copyright Notice Copyright © 2007 Moxa Technologies Co., Ltd. All rights reserved. Reproducti on without perm ission is pr ohibited. Trademarks MOXA is a reg ister ...

  • Moxa Technologies 5400 Series - page 3

    Table of Contents Chapter 1 Introduction ..................................................................................... 1-1 Overview ....................................................... ................................................. 1-2 Package Checklist .............................................. ................................... ...

  • Moxa Technologies 5400 Series - page 4

    Auto warning: E-m ail and SN MP trap ............................. .................. 5-27 Event Type ..................................................... ................................... 5-28 Monitor ........................................................ ................................................. 5-30 Monitor Line .................... ...

  • Moxa Technologies 5400 Series - page 5

    1 1 Chapter 1 Introduction Welcome to t he MOXA NPor t 5400 Series of advance d serial device ser vers, which m ake it easy to enable network o peration of your serial de vices. All devi ce servers in the series c ome with four serial ports. On the NPort 5410, the ser ial ports are RS-232 ports; on the NPort 5430/5430I, th e serial ports are RS-422 ...

  • Moxa Technologies 5400 Series - page 6

    NPort 5400 Series User’s Manual Introduction 1-2 Overview NPort 5400 Series de vice servers are desi gned to ma ke your industrial serial devices Internet ready instantly. The compact size of NPort 5400 devi ce servers make s them the ideal choice for connecting RS -232/422/ 485 serial de vices—such as PLCs, m eters, and sens ors—to an I P-ba ...

  • Moxa Technologies 5400 Series - page 7

    NPort 5400 Series User’s Manual Introduction 1-3 Product Specifications LAN Ethernet 10/10 0 Mbps, R J45 Protection Built-in 1.5 KV magnetic isolation NPort 5410 Serial Interface Interface RS-232 No. of Ports 4 Port Type DB9 Male Signals TxD, RxD, RTS, CTS , DTR, DSR, DCD, GND Serial Line Prot ection 15 KV ESD f or all signals NPort 5430/5430I Se ...

  • Moxa Technologies 5400 Series - page 8

    NPort 5400 Series User’s Manual Introduction 1-4 Serial Communication Parameters Parity None, Even, Odd, Space, Mark Data Bits 5, 6, 7, 8 Stop Bit 1, 1.5, 2 Flow Control RTS/CTS, XON/XOFF, DSR/DTR (NPor t 5410, 5450, and 5450I only) Transmissi on Speed 50 bps to 921.6 Kbps Software Fe atures Protocols ICMP, IP, TCP, UD P, DHCP, BOOTP, Te lnet, DN ...

  • Moxa Technologies 5400 Series - page 9

    2 2 Chapter 2 Getting Started This chapter includ es information about installing NPort 5400 Series device servers. The following t opics are c overed:  Panel Layout  Connecting the Hardware ¾ Wiring Requirements ¾ Connecting the Power ¾ Grounding the NPort 5400 ¾ Connecting to the Network ¾ Connecting to a Serial Device ¾ LED Indicator ...

  • Moxa Technologies 5400 Series - page 10

    NPort 5400 Series User’s Manual Getting Started 2-2 Panel Layout NPort 5410 /5450/5450I RJ45 10/100 Mbps Ethernet port T erminal Block power input LCM display panel Indicator LEDs Input buttons Male DB9 serial port Serial Device Server 5410 NP5410_61405 192.168.127.254 Power input RESET LAN V+ V- Port 1 RS-232 Port 2 RS-232 Port 3 RS-232 Port 4 R ...

  • Moxa Technologies 5400 Series - page 11

    NPort 5400 Series User’s Manual Getting Started 2-3 Connecting the Hardware This section describes how to connect the NPor t 5400 to serial devices for first time testing purposes. We c over Wiring Requirements , Connecting the Power , Grounding the NPort 5400 Series , Connecting to the Network , Connecti ng to a Seri al Device , and LED I ndicat ...

  • Moxa Technologies 5400 Series - page 12

    NPort 5400 Series User’s Manual Getting Started 2-4 ATTENTION This product is intended to be m ounted to a wel l-grounded mounting surface such as a metal panel. SG : The Shielded Ground (sometimes called Pr otected Ground ) contact is the left m ost contac t of the 3-pin power terminal block connecto r when viewed from the angle shown here. Conn ...

  • Moxa Technologies 5400 Series - page 13

    NPort 5400 Series User’s Manual Getting Started 2-5 Adjustable Pull High/low Resistors for the RS-485 Port In some critical environm ents, you may need to add termination resistors t o prevent the reflection of serial signals. When using t ermination resistors, it is important to set the pul l high/low resistors correctly so that the elec trical ...

  • Moxa Technologies 5400 Series - page 14

    3 3 Chapter 3 Initial IP Address Configuration When setting up your NPor t 5410/5430/5430I /5450/5450I fo r the first time, the first thing you should do i s configuring t he IP address. This chapter i ntroduces the m ethod to confi gure the NPort’s IP address. Select one of the initial IP Address co nfiguration methods to configure the NPort’s ...

  • Moxa Technologies 5400 Series - page 15

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-2 Initializing the NPort’s IP Address 1. Determine whether your NPort needs to use a Static IP or Dynamic IP (either DHCP or BOOTP application). 2. If the NPort is used in a Static IP environment, you can use LCM Display, NPort Administ ration Suite, AR P, Web Cons ole, or Telne ...

  • Moxa Technologies 5400 Series - page 16

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-3 There are fou r push butto ns on the N Port’s nam eplate. Goin g from l eft to right, t he button s are: Button Name Action MENU menu activates the main menu, or returns to a lower level U up cursor scrolls up through a list of items shown on the LCM panel’ s second line V d ...

  • Moxa Technologies 5400 Series - page 17

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-4 Main Menu Server setting Serial number Server name Firmware ver Model name D C D D Network setting Ethernet status MAC address IP config IP address Netmask Gateway DNS server 1 DNS server 2 D D C C C C C C Serial set Select port Baud rate Data bit Stop bit Parity Flow control Tx ...

  • Moxa Technologies 5400 Series - page 18

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-5 The second type of con figurable option i s wh en there are only a small number of options from which to choose (although only one op tion will be visible at a time). Consid er the PARITY attribute under PORT S ETTING as an example. Follow the tree graph to arrive at the followi ...

  • Moxa Technologies 5400 Series - page 19

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-6 Take the following steps to use ARP to con figure the IP address: 1. Obtain a vali d IP address for you r NPort from your network adm inistrator. 2. Obtain the NPort’s MAC address from the label on its bottom panel. 3. Execute the ‘arp -s’ com mand from your com puter’s ...

  • Moxa Technologies 5400 Series - page 20

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-7 4. Type 2 to select Netw ork settings , and then press Enter . 5. Type 1 to select IP address and then press Enter . 6. Use the Backspa ce key to erase the curre nt IP address, t ype in the new IP address, and then press Enter . ...

  • Moxa Technologies 5400 Series - page 21

    NPort 5400 Series User’s Manual Initial IP Address Configuration 3-8 7. Press any key to contin ue… 8. Type m and th en press Enter to return to the m ain menu. 9. Type s and then pr ess Enter to Save/R estart the system. 10. Type y and then press Enter to save the new IP address and restart the NPort. ...

  • Moxa Technologies 5400 Series - page 22

    4 4 Chapter 4 Choosing the Proper Operation Mode In this chapt er, we desc ribe the vari ous NPort 5400 operat ion modes. The options include an operation m ode that uses a driver instal led on the host c omputer, a nd operat ion modes t hat rely on TCP/IP socket programm ing concepts. After choosi ng the proper operation mode in this chap ter, ref ...

  • Moxa Technologies 5400 Series - page 23

    NPort 5400 Series User’s Manual Choosing the Proper Operation Mode 4-2 Overview NPort device servers enable netw ork op eration of traditional RS- 232/422 /485 devices, in which a device server is a t iny comput er equippe d with a CP U, real-tim e OS, and TC P/IP protocol s that can bi-directionally translate data between the se rial and Etherne ...

  • Moxa Technologies 5400 Series - page 24

    NPort 5400 Series User’s Manual Choosing the Proper Operation Mode 4-3 ATTENTION The driver used for Real COM Mode comes with the NPort Windows Administrator. The driver is installed automatically on your co mputer when you install NPort Administration Suite. The important point is t hat Real COM Mode allows use rs to continue using RS- 232/422/4 ...

  • Moxa Technologies 5400 Series - page 25

    NPort 5400 Series User’s Manual Choosing the Proper Operation Mode 4-4 TCP Client Mode In TCP Client mode , the NPort can actively establish a TCP connection to a pre-def ined host computer whe n serial data a rrives. After the data has been transf erred, the NPort can automatically disconn ect from the host computer by using the TCP alive check ...

  • Moxa Technologies 5400 Series - page 26

    NPort 5400 Series User’s Manual Choosing the Proper Operation Mode 4-5 Reverse Telnet Mode Co nso le managem ent is com monly use d by connect ing to C onsole/AUX or COM po rts of ro uters, switches, and UPS units. Rtelnet works the same as RAW mode in that only one TCP port is listened to afte r booting up. The system then waits for a host on th ...

  • Moxa Technologies 5400 Series - page 27

    5 5 Chapter 5 Web Console Configuration The Web Cons ole is the m ost user-frien dly way t o configure t he NPort 5 410/5430/54 30I. This chapter will introdu ce the Web Con sole function groups and function definitions. Th is chapter uses the NPort 5230 as an example. The f unction and definit ion is total ly the same wi th NPort 5400 series devic ...

  • Moxa Technologies 5400 Series - page 28

    NPort 5400 Series User’s Manual Web Console Configuration 5-2 Opening Your Browser 1. Open your browser with the cookie function en abled . (To enable your browser for cook ies, right click on you r desktop Inte rnet Explorer ic on, select Properties, click on the Security tab, and then select the three Enable option s as shown in the figure belo ...

  • Moxa Technologies 5400 Series - page 29

    NPort 5400 Series User’s Manual Web Console Configuration 5-3 ATTENTION Refer to Chapter 3, “Initial IP Address Configura tion,” to see how to configure the IP address. Examples shown in this chapter use the F actory Def ault IP address (1 92.168.127.254) . The NPort 5410/54 30/5430I/5450/5450I homep age will open. On this page, you can see a ...

  • Moxa Technologies 5400 Series - page 30

    NPort 5400 Series User’s Manual Web Console Configuration 5-4 Basic Settings Server name Setting Factory Defaul t Necessity 1 to 39 characters NP[model name]_[Serial No.] Optional This option is useful for specify ing the location or appl ication of dif ferent NP ort device serve rs. Time The NPort 5410/5430/543 0I/5450/5450I has a built-in Real- ...

  • Moxa Technologies 5400 Series - page 31

    NPort 5400 Series User’s Manual Web Console Configuration 5-5 Click on the Modify button to open the Modify time settings window to input the correct local time. Time server Setting Factory Defaul t Necessity IP or Domain address (E.g., 192 .168.1.1 or ti me.stdtime.go v .tw or time.nist.gov) None Optional The NPort 5410/5430/543 0I/5450/5450I us ...

  • Moxa Technologies 5400 Series - page 32

    NPort 5400 Series User’s Manual Web Console Configuration 5-6 password, pres s SEL , etc. Once the password has bee n entered, press SEL until the LCM screen is activated. Reset button protect Setting Factory Defaul t Necessity No or Y es No Required Options are No and Ye s , with default = No . NOTE: Select the Ye s option to allow li mited use ...

  • Moxa Technologies 5400 Series - page 33

    NPort 5400 Series User’s Manual Web Console Configuration 5-7 IP Address Setting Factory Defaul t Necessity E.g., 192.168.1.1 (IP addresses of th e form x . x . x .0 and x . x . x .255 are inva lid.) 192.168 .127.254 R equired An IP address is a number assi gned to a net work devi ce (such as a c omputer) a s a permanent address on the network. C ...

  • Moxa Technologies 5400 Series - page 34

    NPort 5400 Series User’s Manual Web Console Configuration 5-8 DNS server 1 / DNS sever 2 Setting Factory Defaul t Necessity E.g., 192.168.1.1 (IP addresses of th e form x . x . x .0 and x . x . x .255 are inva lid.) None Optional When the user wants to vi sit a particul ar webs ite, the com puter asks a Domain Name System (DNS) serve r for the we ...

  • Moxa Technologies 5400 Series - page 35

    NPort 5400 Series User’s Manual Web Console Configuration 5-9 configure the Au to IP report func tion. There are two ways to devel op an “Auto IP report Server” to receive the NPort’s Auto IP report. 1. Use NPort Admini strator’s IP Ad dress Report function. 2. Refer the Appendix E for the “Au to IP report protocol” to develop your ow ...

  • Moxa Technologies 5400 Series - page 36

    NPort 5400 Series User’s Manual Web Console Configuration 5-10 Port alias Setting Factory Defaul t Necessity 1 to 15 characters (E.g. , PLC-No.1 ) None Optional Port Alias is specially designed to allow easy identification of the serial devices which are connected to the NPort’s seria l port. Serial Parameters ATTENTION Check the serial communi ...

  • Moxa Technologies 5400 Series - page 37

    NPort 5400 Series User’s Manual Web Console Configuration 5-11 Interface Setting Factory Defaul t Necessity NPort 5410 : RS-232 only NPort 5410 : RS-232 Required NPort 5430 : RS-422, 2-wire RS-485 , 4-wire RS-485 NPort 543 0: RS-485 2- wire Required NPort 5450 : RS-232, RS-422, 2-wire RS-485, 4-wire RS-485 NPort 545 0: RS-232 Required Operating S ...

  • Moxa Technologies 5400 Series - page 38

    NPort 5400 Series User’s Manual Web Console Configuration 5-12 TCP alive check time Setting Factory Defaul t Necessity 0 to 99 m in 7 min Optional 0 min: TCP connection is not closed due to an idle TCP connection. 1 to 99 min: The NPort automatically clo ses TCP connection if there is no TCP activity for the given time. After the connection is cl ...

  • Moxa Technologies 5400 Series - page 39

    NPort 5400 Series User’s Manual Web Console Configuration 5-13 Default = 0, The Delimiter Process will be followed, regardless of the leng th of the data packet. If the data length (in bytes) matches the configured va lue, the data will be forced out. Th e data length can be configured for 0 to 1024 bytes. Set to 0 if you do not need to limit the ...

  • Moxa Technologies 5400 Series - page 40

    NPort 5400 Series User’s Manual Web Console Configuration 5-14 10 (bits) / 1200 (bits/s) * 100 0 (ms/s) = 8.3 ms. Therefore, you shou ld set Force Transmit timeout to be larg er than 8.3 ms. Force Tran smit timeout is specified in millis econds and m ust be larger tha n 10 ms. If the user wants to se nd the series of characters in a packet, the s ...

  • Moxa Technologies 5400 Series - page 41

    NPort 5400 Series User’s Manual Web Console Configuration 5-15 If the value of inactivity time is set to 0, the current TCP connection is maintained until there is connection close request. Although inactiv ity time is disabled, the NPort will check the connection status between t he NPort and rem ote host by sending “ keep alive” packets per ...

  • Moxa Technologies 5400 Series - page 42

    NPort 5400 Series User’s Manual Web Console Configuration 5-16 Delimiter 1 Setting Factory Defaul t Necessity 00 to FF None Optional Delimiter 2 Setting Factory Defaul t Necessity 00 to FF None Optional Once the NPort receives both deli miters through its serial port, it immediately packs all data currently in its buffer and sends it to the NPort ...

  • Moxa Technologies 5400 Series - page 43

    NPort 5400 Series User’s Manual Web Console Configuration 5-17 is specified in millis econds and m ust be larger tha n 10 ms. If the user wants to se nd a series of character in a pac ket, the se rial device attached to the NPort should send characters withou t time del ay larger than Force Transmit timeout between cha racters and the total lengt ...

  • Moxa Technologies 5400 Series - page 44

    NPort 5400 Series User’s Manual Web Console Configuration 5-18 TCP alive check time Setting Factory Defaul t Necessity 0 to 99 m in 7 min Optional 0 min: TCP connection is not closed due to an idle TCP connection. 1 to 99 min: The NPort automatically closes th e TCP connection if there is no TCP activity for the given tim e. Inactivity time Setti ...

  • Moxa Technologies 5400 Series - page 45

    NPort 5400 Series User’s Manual Web Console Configuration 5-19 can be configured for 0 to 1024 bytes. Set to 0 if you do not need to limit the leng th. Delimiter 1 Setting Factory Defaul t Necessity 00 to FF None Optional Delimiter 2 Setting Factory Defaul t Necessity 00 to FF None Optional Once the NPort receives both deli miters through its ser ...

  • Moxa Technologies 5400 Series - page 46

    NPort 5400 Series User’s Manual Web Console Configuration 5-20 is specified in millis econds and m ust be larger tha n 10 ms. If the user wants to se nd a series of characters in a pac ket, the se rial de vice attached to the NPort should send characters withou t time del ay larger than Force Transmit timeout between cha racters and the total len ...

  • Moxa Technologies 5400 Series - page 47

    NPort 5400 Series User’s Manual Web Console Configuration 5-21 Connect/Disconnect Description St artup/None (default) A TCP connection will be establishe d on startup, and will remain active indefinitely . Any Character/None A TCP connection will be established whe n any character is received from the serial interface, and will remain active inde ...

  • Moxa Technologies 5400 Series - page 48

    NPort 5400 Series User’s Manual Web Console Configuration 5-22 Delimiter 2 Setting Factory Defaul t Necessity 00 to FF None Optional Once the NPort receives both deli miters through its serial port, it immediately packs all data currently in its buffer and sends it to the NPort’s Ethernet port. Note: Delimiter 2 is option al. If left blank, the ...

  • Moxa Technologies 5400 Series - page 49

    NPort 5400 Series User’s Manual Web Console Configuration 5-23 Destination IP address 1 Setting Factory Defaul t Necessity Begin: Empty End: Empty IP addres s range E.g., Begi n: 192.16 8.1.1 End: 192.168.1.10 Port: 4001 Required Destination IP address 2/3/4 Setting Factory Defaul t Necessity Begin: Empty End: Empty IP addres s range E.g., Begi n ...

  • Moxa Technologies 5400 Series - page 50

    NPort 5400 Series User’s Manual Web Console Configuration 5-24 TCP alive check time Setting Factory Defaul t Necessity 0 to 99 m in 7 min Required 0 min: TCP connection is not closed due to an idle TCP connection. 1 to 99 min: The NPort 5400 closes the TCP con nection automatically if there is no TCP activity for the given time. Destination IP ad ...

  • Moxa Technologies 5400 Series - page 51

    NPort 5400 Series User’s Manual Web Console Configuration 5-25 Reverse Telnet Mode TCP alive check time Setting Factory Defaul t Necessity 0 to 99 m in 0 Optional Specifies the time slice for checking if t he TCP connection is alive. If no response, the NPort 54 00 will disconnect the original connection. Inactivity time Setting Factory Defaul t ...

  • Moxa Technologies 5400 Series - page 52

    NPort 5400 Series User’s Manual Web Console Configuration 5-26 Disabled Mode When Operation mode is set to Disabled, that pa rticular port will b e disabled. Check the “Apply the above settings to all serial ports” to apply this setting to the other port. Accessible IP Settings The NPort has an IP address based filtering method to c ontrol ac ...

  • Moxa Technologies 5400 Series - page 53

    NPort 5400 Series User’s Manual Web Console Configuration 5-27 Allowable Hosts Input format Any host Disab le 192.168.1.120 192.168.1.120 / 255.255.255.2 55 192.168.1.1 to 192.168.1.254 192.168.1.0 / 255.255.255 .0 192.168.0.1 to 192.168.255 .2 54 192.168.0.0 / 255.255 .0.0 192.168.1.1 to 192.168.1.126 19 2.168.1.0 / 255.255.255 .128 192.168.1.12 ...

  • Moxa Technologies 5400 Series - page 54

    NPort 5400 Series User’s Manual Web Console Configuration 5-28 ATTENTION Consult your Network Adm inistrator or IS P for the proper m ail server settings. Aut o warning function may not work pr operly without proper settin gs. NPort SMTP AUTH supports LOGIN , PLAIN, CRAM-MD5 ( RFC 2554). SNMP Trap Server SNMP trap server IP or domain name Setting ...

  • Moxa Technologies 5400 Series - page 55

    NPort 5400 Series User’s Manual Web Console Configuration 5-29 Password ch anged The user has ch anged the NPo rt’s password. When the password changes, the NPort will send an e-mail with the password ch ange notice before the NP ort reboots. If the NPort fails to sen d mail to the mail server after 15 seconds, the NPort will be rebooting direc ...

  • Moxa Technologies 5400 Series - page 56

    NPort 5400 Series User’s Manual Web Console Configuration 5-30 Monitor Monitor Line Click on Line under Monitor to show the operation mode and status of each connection (IPx), for each of the four serial ports. Monitor Async Click on Async under Monitor to show the current status of each of the four serial ports. Monitor Async-Settings Click on A ...

  • Moxa Technologies 5400 Series - page 57

    NPort 5400 Series User’s Manual Web Console Configuration 5-31 Change Password Input the “Old password” and “N ew password” to chan ge the pa ssword. Leave the p assword boxes blank to erase the password. In this case, the NPort will no t have password protection. ATTENTION If you forget the p assword, the ONLY way to co nfigur e the NPor ...

  • Moxa Technologies 5400 Series - page 58

    6 6 Chapter 6 Configuring NPort Administrator The following topics are covered in this chapter:  Overview  Installing NPort Administrator  Configuration ¾ Broadcast Search ¾ Specify by IP Address ¾ Password Protection ¾ Unlock Password Protection ¾ Configuring the NPort 5400 ¾ Web Console ¾ Upgrading the Firmware ¾ Export Configura ...

  • Moxa Technologies 5400 Series - page 59

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-2 Overview NPort Administration Su ite is an integ rated soft ware suite that b undles NP ort Adm inistrator and the IP Serial Librar y, providing everything yo u need to manage, monitor, an d modify your NPort 5400 from a remote location. With NPort Admini strator, you ca n easily ...

  • Moxa Technologies 5400 Series - page 60

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-3 3. Click on Next to install the program using the de fault prog ram name , or select a diffe rent name. 4. Click on Install to proceed with the installation. ...

  • Moxa Technologies 5400 Series - page 61

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-4 5. The Installing window reports the prog ress of the installation. 6. Click on Next to proceed with the installation. ...

  • Moxa Technologies 5400 Series - page 62

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-5 7. Click on Finish to complete the installation of NPort 5400 Administration Suite. Configuration The Admi nistrator-Confi gurati on window is divided int o four pa rts. y The top sectio n contains the function li st and onl ine help area. (Windows NT does not suppo rt this .chm ...

  • Moxa Technologies 5400 Series - page 63

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-6 Broadcast Search The Broadcast Search function is used to locate all NPort 5400s that are connected to t he same LAN as your computer. Since the Broadcast Searc h function searches by MAC address and no t IP address, all NPort 5400s connected to the LAN will be located, regardles ...

  • Moxa Technologies 5400 Series - page 64

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-7 Password Protection The NPort 5400 can be passw ord-protected to pre vent unauthorized c onfiguration cha nges. The six possibl e protectio n states are descri bed be low. Note that the term “Fixed’ is borrowed from the st andard fixed IP address networking t erminology . Whe ...

  • Moxa Technologies 5400 Series - page 65

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-8 1. Select the NPort 5400 with “Lock” status, click the right mouse bu tton, and then select Unlock . 2. Input the password and then click on OK . 3. NPort Administrator will display an “Unlock ok” message. 4. The “Lock” status will change to “Unlock,” and th e Adm ...

  • Moxa Technologies 5400 Series - page 66

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-9 1. To start NPort Administrator, click on Start Æ NPort Administration Suite Æ NPort Administrator . 2. Unlock the NPort 5400 y ou wish to co nfigure if it is password protected. R ight click o n the NPort 5400 and select Configure to start the configuration. 3. The progress b ...

  • Moxa Technologies 5400 Series - page 67

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-10 4. Refer to Chapter 5 for each parameter’s function definition. To modify the configuration, you must first click in the modify box to activate the parameter setting box. For example, click on the middle m odify box. 5. You will now be able to modify Time Zone , Local Date , L ...

  • Moxa Technologies 5400 Series - page 68

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-11 Web Console You can use the web co nsole to configure device servers in the NPort 5000 lin e. The web console can be opene d from NPo rt Admi nistrator by right clickin g on the de vice server a nd selecting the Web function. Upgrading the Firmware Follow these steps to upgrade ...

  • Moxa Technologies 5400 Series - page 69

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-12 3. Select the correct ROM file to download. 4. Wait while the Upgrade Firmware action is processed. ATTENTION You can simultaneously upgrade the firmware of multiple NPort 5400s that are of the same model. To select multiple NPort 5400s, hold down the Ctrl key when selecting an ...

  • Moxa Technologies 5400 Series - page 70

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-13 Export Configuration To export the conf iguration of an NPort 5400, right click on the NPort 5400, select Export Configuration , and then follow the onscreen instructions. The Export Configu ration function is a handy tool that can be use d to produce a text file containing the ...

  • Moxa Technologies 5400 Series - page 71

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-14 ATTENTION You can simultaneously import the same configuration file into multiple NPort 5400s that are of the same model. To select multiple NPort 5400s, hold down the Ctrl key when selecting an additional NPort 5400, or hold do wn the Shift key to select a block of NPort 5400s. ...

  • Moxa Technologies 5400 Series - page 72

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-15 Monitor Æ Add T arget Æ Rescan 1. Click on Monitor under Function . 2. Click on Monitor Æ Add T arget from t he menu bar, or click the right mouse button an d select Add Target . 3. Click on Rescan . ...

  • Moxa Technologies 5400 Series - page 73

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-16 4. Select your targets from the list, and t hen click on OK . Monitor Æ Load Confi gured COM Port Use the Load C onfigured COM Port functi on to moni tor device ser vers that are bei ng used fo r COM Mapping. Once the Monitor function is running: 1. The NPort 5400 list will app ...

  • Moxa Technologies 5400 Series - page 74

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-17 2. Right cli ck the panel a nd select Settings . 3. Select or de-select Monitor I tems . Use the singl e arrowhe ad buttons to m ove highlighted items from one box to the other. Use the double arrowhead buttons to move all items in one box to the other. 4. Select a Refre sh Rate ...

  • Moxa Technologies 5400 Series - page 75

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-18 5. On the Advanced Settings page, select Display warning message for new event and/ or Play warning music for new event . In the second case, you m ust enter the path to the WAV file that you want to be played. “ New event” means that one of the NPort 5400s in the monitor is ...

  • Moxa Technologies 5400 Series - page 76

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-19 8. When one of the NPort 5400s loses connection with the Monitor program, a warning alert will display automatically. The warning music will be played at the same time. 9. In the Monitor screen, you ca n see that the NPor t 5400s that are “ Not Alive” are shown in re d color ...

  • Moxa Technologies 5400 Series - page 77

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-20 11. The NPort 5400s that were reconnected, and are now “Alive,” will be shown in black color. Port Monitor The process de scribed here i s the same as i n the previous “ Monitor” secti on. The only difference is that you can select more items und er Port Monitor than und ...

  • Moxa Technologies 5400 Series - page 78

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-21 COM Mapping Windows Admin istration Suite comes with Windows 95 /98/ME/NT/2000/XP Real COM dr ivers. After you install NPort 5400 Administration Suite , there are two w ays to set up the NPort 5400 serial port as your host’s remote COM port. The first way is with On-line COM M ...

  • Moxa Technologies 5400 Series - page 79

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-22 3. Add the target to which you would like to map COM ports. 4. The NPort 5400 list that appears is the list gene rated by the previous Br oadcast Search. S elect the NPort 5400 to which you would like to map COM ports. 5. Select COM Settin gs to modify COM No., default setting, ...

  • Moxa Technologies 5400 Series - page 80

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-23 6. Select the COM Number . This assigns a COM Num ber that your PC host can use to a ccess the NPort’s serial port. Available COM Numbers and status are shown in the drop-down list. COM Num bers that are already being used by the sys tem, includi ng COM Num bers that are alrea ...

  • Moxa Technologies 5400 Series - page 81

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-24 However, it might take more time (on the order of several hundred milliseconds) than a native COM1, because it needs to work via Ethernet. That ’s why the native COM ports on the motherboard can work fast with this function call, but the NPort requires much more tim e. In orde ...

  • Moxa Technologies 5400 Series - page 82

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-25 9. After setting the COM Mapping, remember to select Appl y Change to save the information in the host system registry. The host computer will not have the ability to use the COM port until after Apply Change is selected. 10. Select Discar d Change to tell Administrator NOT to s ...

  • Moxa Technologies 5400 Series - page 83

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-26 11. To save the configuration to a text file, select Export COM Mappin g . You will then be ab le to import this configu ration file to another host and use t he same C OM Mapping settings in the other host. Off-line COM Mapping 1. Add a target by inputting the IP addr ess and s ...

  • Moxa Technologies 5400 Series - page 84

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-27 2. Modify t he port sett ings as needed. 3. Right click in the NPort list section and select Apply Change . ...

  • Moxa Technologies 5400 Series - page 85

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-28 IP Address Report When the NPort 5400 is used in a dynamic IP envi ronment, users must spend more time with IP management tasks. To m ake things easier, t he NPort 5400 can periodically report its IP address t o the IP location server, in case the address has changed. The IP l o ...

  • Moxa Technologies 5400 Series - page 86

    NPort 5400 Series User’s Manual Configuring NPort Administrator 6-29 4. Click Go to start receiving the Auto IP address report from the NPort 5400 Automatic Message Log Since NPort Administrator may be used in a multi-user environment, it is possible for a user to modify a de vice server’s co nfiguration wi th othe r users una ware of the cha n ...

  • Moxa Technologies 5400 Series - page 87

    7 7 Chapter 7 IP Serial LIB The following topics are covered in this chapter:  Overview  IP Serial LIB Function Groups  Example Program ...

  • Moxa Technologies 5400 Series - page 88

    NPort 5400 Series User’s Manual IP Serial LIB 7-2 Overview What is IP Seri al Library? IP Serial Library is a Windows library w ith freq uently used serial comm and sets and su broutines. IP Serial Library is designed to reduce t he comple xity and poor effici ency of serial c ommunicatio n over TCP/IP. For exam ple, Telnet can only transfer data ...

  • Moxa Technologies 5400 Series - page 89

    NPort 5400 Series User’s Manual IP Serial LIB 7-3 IP Serial LIB Function Groups Server Control Port Co ntro l Input/O utput Data Po rt Status Inquiry Miscellaneous nsio_init nsio_end nsio_resetserv er nsio_checkalive nsio_ope n nsio_close nsio_ioctl nsio_flowct rl nsio_DTR nsio_RTS nsio_lctrl nsio_baud nsio_resetp ort nsio_read nsio_SetReadTim eo ...

  • Moxa Technologies 5400 Series - page 90

    A A Appendix A Pinouts and Cable Wiring In this appendix, we cover th e following topics.  Port Pinout Diagrams ¾ Ethernet Port Pinouts ¾ Serial Port Pinouts  Cable Wiring Diagrams ¾ Ethernet Cables ¾ Serial Cables ...

  • Moxa Technologies 5400 Series - page 91

    NPort 5400 Series User’s Manual Pinouts and Cable Wiring A-2 Port Pinout Diagrams Ethernet Port Pinouts Serial Port Pinouts DB9 Male RS-232 Po rt Pinouts for NPort 5410 /5450/5450I Terminal Block RS-232 & RS-422/ 485 Pinouts for NPort 5430/5430I ...

  • Moxa Technologies 5400 Series - page 92

    NPort 5400 Series User’s Manual Pinouts and Cable Wiring A-3 Cable Wiring Diagrams Ethernet Cables Serial Cables DB9 Female to DB9 Male for N Port 5410 ...

  • Moxa Technologies 5400 Series - page 93

    NPort 5400 Series User’s Manual Pinouts and Cable Wiring A-4 DB9 Female to DB25 Male fo r NPort 5410 ...

  • Moxa Technologies 5400 Series - page 94

    B B Appendix B Well Known Port Numbers This appendix is for your reference about the W ell Known port numbers that may cause networ k problem if you set the NPort into the same port. Refer to RFC 1700 for Well Known port numbers of refer to the following introduction from the IANA. The port num bers are divide d into three ranges: the Wel l Known P ...

  • Moxa Technologies 5400 Series - page 95

    NPort 5400 Series User’s Manual Well Known Port Numbers B-2 49 (Login Host Prot ocol) (Logi n) 53 Domai n Name Server ( domain) 79 Finger protocol (Finger) 80 W orld W i de W eb HTTP 1 19 Network Ne ws T ransfe r Proto col (NNTP ) 123 Network T im e Protocol 213 IPX 160 – 223 Reserved for future use UDP Socket Application Service 0 reserved 2 M ...

  • Moxa Technologies 5400 Series - page 96

    C C Appendix C SNMP Agents with MIB II & RS-232 like group The NPort 5400 has built-in SNMP (Simple Network Management Protocol) agent software. It supports SNMP Tr ap, RFC1317 RS-232 like gr oup and RFC 1213 MIB-II. Th e following table lists the standard MIB-II group, as well as the v ariable implementation for the NPort 5400. RFC1213 MIB-II ...

  • Moxa Technologies 5400 Series - page 97

    NPort 5400 Series User’s Manual SNMP Agents C-2 System MIB Interfaces MIB IP MIB ICMP MIB SysServices ifInUnknownProtos ipReasm Fails IcmpOutT imeExcds ifOutOctets ipFragOKs IcmpOutParmProbs ifOutUcastPkts ipFragFails IcmpOutSrcQuenchs ifOutNUcastPkts ipFrag Creates IcmpOutRedirects ifOutDiscards ipAdEntAddr IcmpOutEchos ifOutErrors ipAdEntIfI nd ...

  • Moxa Technologies 5400 Series - page 98

    NPort 5400 Series User’s Manual SNMP Agents C-3 Addre ss T ranslation MIB TCP MIB SNMP MIB AtNetAddress tcpRetransSegs snmpInT otalSetV ars tcpConnState snmpInGetRequests tcpConnLocal Address snmpInGetNe xts tcpConnLocal Port snmpInSetRe quests tcpConnRem Address snmpInGetRespo nses tcpConnRem Port snmpInT raps tcpInErrs snmpOutT ooBigs tcpOutRst ...

  • Moxa Technologies 5400 Series - page 99

    D D Appendix D Auto IP Report Protocol NPort de vice servers pr ovide several ways to configure Ethernet IP addresses. O ne of them is DHCP Client. When you set up the NPort to use DHCP Client to configur e Ethernet IP add resses, it will automatically send a DHCP request over the Ethernet to find the DHCP Server. And then the DHCP Server will send ...

  • Moxa Technologies 5400 Series - page 100

    NPort 5400 Series User’s Manual Auto IP Report Protocol D-2 Auto IP Repo rt Format “MOXA ” , 4 bytes Info[0] Info[1] … Info[n] Info [n] Field ID Length Data Length 1 1 V ariable, Length is “Len gth Field” ID List ID V alue Description Length Note 1 Server Name V ariable ASCII char 2 Hardware ID 2 Little-endian 3 MAC Address 6 6 bytes MA ...

  • Moxa Technologies 5400 Series - page 101

    E E Appendix E Service Information This appen dix shows y ou how to co ntact MOXA for inform ation about t his and ot her products, and how to report problems. In this appendix, we cover th e following topics.  MOXA Internet Services  Problem Report Form  Product Return Procedure ...

  • Moxa Technologies 5400 Series - page 102

    NPort 5400 Series User’s Manual Service Information E-2 MOXA Internet Services Customer satisfaction is our num b er one concern, and to ensure that customers receive the full benefit of our products, MOXA Inter net Services has been set up t o provide tech nical support , driver updates , product i nformati on, and user’s m anual updates. The ...

  • Moxa Technologies 5400 Series - page 103

    NPort 5400 Series User’s Manual Service Information E-3 Problem Report Form MOXA NPort 5400 Series Customer name: Comp any: T el: Fax: Email: Date: 1. MOXA Pr oduct:  NPort 5410  NPort 5430  N Port 5430I  NPort 5450  NPort 5450I 2. Serial Number: ___________ ______ Problem Desc ription: Please describe the sym ptoms of the problem ...

  • Moxa Technologies 5400 Series - page 104

    NPort 5400 Series User’s Manual Service Information E-4 Product Return Procedure For product repair, exc hange, o r refund, the customer m ust:  Provide e vidence of origi nal purchase.  Obtain a Product Return Agreement (PRA) from the sales representative or dealer.  Fill out the Problem Report Fo rm (PRF). Include as much detail as pos ...

Manufacturer Moxa Technologies Category Network Card

Documents that we receive from a manufacturer of a Moxa Technologies 5400 Series can be divided into several groups. They are, among others:
- Moxa Technologies technical drawings
- 5400 Series manuals
- Moxa Technologies product data sheets
- information booklets
- or energy labels Moxa Technologies 5400 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Moxa Technologies 5400 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Moxa Technologies 5400 Series, service manual, brief instructions and user manuals Moxa Technologies 5400 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Moxa Technologies 5400 Series.

Similar manuals

A complete manual for the device Moxa Technologies 5400 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Moxa Technologies 5400 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Moxa Technologies 5400 Series.

A complete Moxa Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Moxa Technologies 5400 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Moxa Technologies 5400 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Moxa Technologies 5400 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Moxa Technologies 5400 Series - which should help us in our first steps of using Moxa Technologies 5400 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Moxa Technologies 5400 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Moxa Technologies 5400 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Moxa Technologies 5400 Series?

Use the form below

If you did not solve your problem by using a manual Moxa Technologies 5400 Series, ask a question using the form below. If a user had a similar problem with Moxa Technologies 5400 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)