Manual ModeCom MC-WR11

64 pages Not applicable
Download

Go to site of 64

Summary
  • ModeCom MC-WR11 - page 1

    1 user ’s manual ...

  • ModeCom MC-WR11 - page 2

    www .modecom.eu 2 Wireless router User’s manual guide 4 Chapter 1 Introduction 4 Features 4 1.2 Operation Environment 5 1.3 System Requirements 6 Chapter 2 Har dware Installation 6 2.1 Led indicators 6 2.2 Back Panel Features 6 2.3 T ypical install 7 Chapter 3 Quick Install Guide 8 3.1 TCP/IP Settings 8 3.2 Getting Started 9 3.3 Setup Wizard 10 C ...

  • ModeCom MC-WR11 - page 3

    3 Wireless router Chapter 4 Advanced Setup 18 4.1 Wireless Advanced setup 18 4.2 Service Setup 21 4.3 Security Setup 24 4.4 QoS Setup 29 4.5 Router Setup 29 4.6 System 30 ...

  • ModeCom MC-WR11 - page 4

    www .modecom.eu 4 Wireless router User’s manual guide Latest versions of manuals, quick start guides, drivers and software are avail- able on www .modecom.eu website. IMPORT ANT NOTE: Provided technical specications are subject to change without prior notice. All brand and product names mentioned in this manual are trademarks and/or reg- ister ...

  • ModeCom MC-WR11 - page 5

    5 Wireless router Quality of Service (QoS) - WMM, WMM-PS Auto wireless transmission channel select for optimal performance Wireless access control (MAC address lter) Advanced Wireless control: Fragment Threshold / RTS Threshold / Beacon Interval Preamble T ype: Long / Short IAPP - Roaming (802.1 1f) Protection / Aggregation / Short GI / WLAN Par ...

  • ModeCom MC-WR11 - page 6

    www .modecom.eu 6 Wireless router Operating T emperature : -10ºC ~50ºC Storage Humidity: 5% ~95% RH Non-condensing Operating Humidity: 10% ~90% RH Non-condensing 1.3 System Requirements An Ethernet-Based Cable or DSL modem 10/100M Ethernet Card on PC TCP/IP network protocol for each PC RJ45 T wisted-pair cable Internet browser: Microsoft Internet ...

  • ModeCom MC-WR11 - page 7

    7 Wireless router LAN(1,2,3,4): 10/100Mbps RJ45 Auto-sensing. These four LAN ports are where you will connect other network devices, such as PCs/Laptops, print servers, remote hard drives, and anything else you want to put on your net- work. If you connect this product with the Network adapter , Hub (or Switch) correctly , the Router ’s correspon ...

  • ModeCom MC-WR11 - page 8

    www .modecom.eu 8 Wireless router Chapter 3 Quick Install Guide 3.1 TCP/IP Settings Before you can access and congure router, you have to setup your net - work adapter IP address. According to the following steps to obtain IP ad- dress automatically from router DHCP Server , The following instruction set up the computer running windows operation ...

  • ModeCom MC-WR11 - page 9

    9 Wireless router 3.2 Getting Started T o access conguration panel open your web browser (MS Internet Explorer, Firefox, Opera or Chrome) and type the router’s IP address: 192.168.1.1 Default User / Password: admin If successful, you can see the status page. ...

  • ModeCom MC-WR11 - page 10

    www .modecom.eu 10 Wireless router 3.3 Setup Wizard Click on “Wizard”, it will guide you to setup your router in six simple steps. Please follow the steps and complete the router conguration. Step 1 - Setup Operation Mode The router supports three operation modes, Gateway , Bridge and Wireless ISP . And each mode is suitable for different us ...

  • ModeCom MC-WR11 - page 11

    11 Wireless router Step 2 - Time Zone Settings The Time Conguration option allows you to congure, update, and main - tain the correct time on the internal system clock. Time Zone Select: Select the Time Zone from the drop-down menu. NTP Server: Select the NTP Server from the drop-down menu. Step 3 - LAN Settings Setup the IP address and Subne ...

  • ModeCom MC-WR11 - page 12

    www .modecom.eu 12 Wireless router Mode 1: DHCP Client Select DHCP Client to obtain IP Address information automatically from your ISP . This mode is commonly used for Cable modem services. Mode 2: Static IP Select Static IP Address if all IP information is provided to you by your ISP . Y ou will need to enter in the IP address, subne t mask, gatew ...

  • ModeCom MC-WR11 - page 13

    13 Wireless router IP Address: Enter the IP address assigned by your ISP Subnet Mask: Enter the Subnet Mask assigned by your ISP . Default Gateway: Enter the Gateway assigned by your ISP . DNS: Enter the DNS server assigned by your ISP . Mode 3: PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Y our IS ...

  • ModeCom MC-WR11 - page 14

    www .modecom.eu 14 Wireless router User Name: Enter your PPPoE user name. Password: Enter your PPPoE password. Mode 4: PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Y our ISP will provide you with IP information and PPTP Server IP Address, of course it also includes a username and password. IP Address: En ...

  • ModeCom MC-WR11 - page 15

    15 Wireless router Mode 5: L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP con- nection. Y our ISP should provide you with a username, password and all necessary data. IP Address: Enter the IP address. Subnet Mask: Enter the subnet Mask. Server IP Address: Enter the PPTP Server IP address provided by your ISP . User Name: Ente ...

  • ModeCom MC-WR11 - page 16

    www .modecom.eu 16 Wireless router Band: Supported standards: 802.1 1B, 802.1 1G, 802.1 1N and mixed. Please choose its band according to standards used by devices which will be con- nected to router . Mode: Support AP , Client, WDS and AP+WDS mode. Network TYPE: This type is only valid in client mode. SSID: Service Set Identier , it identies ...

  • ModeCom MC-WR11 - page 17

    17 Wireless router The following picture shows how to set the WEP security . Key length: WEP supports 64-bit or 128-bit security key . Key Format: User can enter key in ASCII or Hex format. Key Setting: Enter the key , accordingly to chosen format. The keys are used to encryption data transmitted in the wireless network. Fill in the text box by fol ...

  • ModeCom MC-WR11 - page 18

    www .modecom.eu 18 Wireless router Pre-Shared Key Format: Specify the format of the key , passphrase or hex. Pre-Shared Key: Enter the key , accordingly to chosen format. The keys are used to encryption data transmitted in the wireless network. Fill in the text box by following rules below: • 64-bit: Input any 5 ASCII characters or 10 digit Hex v ...

  • ModeCom MC-WR11 - page 19

    19 Wireless router WPS: Checking this box and clicking “OK” will disable WPS function. WPS is turned on by default. WPS Status: When Router ’s settings are factory default, it is set to open security and un-congured state, some registers such as Vista WCN can congure AP . Otherwise If it already shows “Congured”, it means that th ...

  • ModeCom MC-WR11 - page 20

    www .modecom.eu 20 Wireless router Mode: If you choose ‘ Allow Listed ’, only those clients whose wireless MAC addresses are in the access control list will be able to connect to your Ac- cess Point. When ‘Deny Listed’ is selected, these wireless clients on the list will not be able to connect the Access Point. The MAC Address format is 001 ...

  • ModeCom MC-WR11 - page 21

    21 Wireless router WDS: Check this box to enable WDS function. MAC Address: Enter the remote AP MAC address. Security: Set WDS security . Encryption: Y ou may select WEP 64bits, WEP 128bits, WP A (TKIP), WP A (AES). WEP Key Format: Y ou may select to select ASCII Characters or Hexadeci - mal Digits (in the “A-F”, “a-f” and “0-9” range) ...

  • ModeCom MC-WR11 - page 22

    www .modecom.eu 22 Wireless router Protocol & Port Range: The packet with this protocol and port will be re- directed to their local IP . Comment: Y ou can add some comment for this item. Current Filter T able: The table shows all you have congured. Y ou can delete one or all. 4.2.2 T rigger Port Some applications require multiple connection ...

  • ModeCom MC-WR11 - page 23

    23 Wireless router Incoming Protocol: The Protocol used for Incoming Ports Ranges, either TCP or UDP , or both. Comment: Y ou can add some comment for this item. 4.2.3 Demilitarized Zone (DMZ) If you have a client PC that cannot run Internet application properly from behind the NA T rewall or after conguring the Port Forwarding, then you can ...

  • ModeCom MC-WR11 - page 24

    www .modecom.eu 24 Wireless router 4.3 Security Setup The router provides extensive rewall protection by restricting connection parameters to limit the risk of intrusion and defending against a wide array of common hacker attacks. 4.3.1 Security The rewall will allow or block some services according to the following settings. Ping Access on W ...

  • ModeCom MC-WR11 - page 25

    25 Wireless router 1. IP Filter Allow or block the computers according to its IP address.  Allow or block the computers according to its MAC address. ...

  • ModeCom MC-WR11 - page 26

    www .modecom.eu 26 Wireless router  Y ou can block some URL according to URL Key words. If Source IP or MAC is blank, it means all computers can not access this URL, otherwise the rule will be only valid to one computer with this IP or MAC address. Example 1: Block “testurl.com” at all computers. Example 2: B ...

  • ModeCom MC-WR11 - page 27

    27 Wireless router Example 3: Block all URL at all computers from 09:00 to 18:00 on working days. 4. Port lter Y ou can limit some or all computers to access some destination IP and port. Example 1, block all computer to access port 21. Example 2, block one computer with IP address 192.168.1.101 to access port 21. ...

  • ModeCom MC-WR11 - page 28

    www .modecom.eu 28 Wireless router 4.3.3 Denial of Service (DoS) This page used to Block DoS attack. ...

  • ModeCom MC-WR11 - page 29

    29 Wireless router 4.4 QoS Setup The QoS helps improve your network gaming performance by prioritizing applications. By default the bandwidth control is disabled and application priority is not classied automatically . In order to complete this settings, Please follow the steps below . Enable this function. Enter the total speed or choose automa ...

  • ModeCom MC-WR11 - page 30

    www .modecom.eu 30 Wireless router Static Route: Click this box to enable static route. IP Address: The network or host IP address desired to access. Subnet Mask: The subnet mask of destination IP . Default Gateway: The gateway is the router or host’s IP address to which packet was sent. It must be the same network segment with the WAN or LAN por ...

  • ModeCom MC-WR11 - page 31

    31 Wireless router  Y ou can backup or restore the system conguration in this page. Save to File: Save the router’s settings and store it in your local computer. Load from File: Restore the settings from saved le. Resotore to factory: Restore the system settings to factory defau ...

  • ModeCom MC-WR11 - page 32

    www .modecom.eu 32 Wireless router Instr ukcja instalacji 34 Rozdział 1 - Wprowadz enie 3 4 1.1 Specykacja 3 4 1.2 Środowisko pracy 3 5 1.3 Wymagania systemowe 36 Rozdział 2 - Instalacja 3 6 2.1 Diody LED 36 2.2 Panel tylny urządzenia 3 6 2.3 T ypowa instalacja 3 7 Rozdział 3 - Skrócona instrukcja instalacji 3 8 3.1 Ustawienia TCP / IP 38 ...

  • ModeCom MC-WR11 - page 33

    33 Wireless router Rozdział 4 - Advanced Setup 4 8 4.1 Ustawienia zaawansowane sieci bezprzewodowej (WLAN) 4 8 4.2 Ustawienia usług 5 0 4.3 Ustawienia zabezpieczeń 5 3 4.4 Konguracja QoS 5 9 4.5 Router Setup 60 4.6 System 60 ...

  • ModeCom MC-WR11 - page 34

    www .modecom.eu 34 Wireless router Instr ukcja instalacji Najnowsze wersje instrukcji, sterowników i oprogramowania dostępne są na stronie www .modecom.pl WAŻNA INFORMACJA: Podane dane techniczne mogą ulec zmianie bez wcze - śniejszego powiadomienia. Wszystkie znaki towarowe umieszczone w instrukcji należą do ich właścicieli. © 2010 MODE ...

  • ModeCom MC-WR11 - page 35

    35 Wireless router Szyfrowanie 64/128-bit WEP Obsługa Quality of Service (QoS) - WMM, WMM-PS Automatyczny wybór optymalnego kanału transmisji bezprzewodowej Kontrola dostępu do sieci bezprzewodowej (ltr adresów MAC) Zaawansowane ustawienia sieci bezprzewodowych: Próg fragmentacji / Próg mechanizmu RTS / Częstotliwość wysyłania Beacon ...

  • ModeCom MC-WR11 - page 36

    www .modecom.eu 36 Wireless router Wilgotność otoczenia podczas przechowywania urządzenia: 10% ~ 90% RH (bez kondensacji) 1.3 Wymagania systemowe Połączenie Ethernet lub modem DSL Karta Ethernet na PC 10/100M Obsługa protokołu TCP / IP dla każdego komputera Kabel Ethernet RJ45 Przeglądarka internetowa Microsoft Internet Explorer , Firefox, ...

  • ModeCom MC-WR11 - page 37

    37 Wireless router LAN (1,2,3,4): RJ45 10/100Mbps. Do tych czterech portów LAN, można podłączyć urządzenia sieciowe, takie jak komputery PC/Laptopy , serwery wydruku, zewnętrzne dyski twarde i wszystko, co chcesz podłączyć do sie - ci. Jeśli router jest poprawnie połączony z kartą sieciową, Hubem (lub prze - łącznikiem), diody na r ...

  • ModeCom MC-WR11 - page 38

    www .modecom.eu 38 Wireless router Rozdział 3 - Skrócona instrukcja instalacji 3.1 Ustawienia TCP / IP Aby uzyskać dostęp do panelu konguracyjnego routera, należy skongu - rować kartę sieciową. Postępuj zgodnie z instrukcją w celu uzyskania adre - su IP automatycznie z serwera DHCP routera, Poniższa instrukcja opisuje kongurowan ...

  • ModeCom MC-WR11 - page 39

    39 Wireless router 3.2 Wprowadzenie Aby uzyskać dostęp do panelu konguracyjnego, należy otworzyć przeglą - darkę internetową, taką jak Internet Explorer / Firefox / Opera / Chrome i wpisać adres IP routera: 192.168.1.1 Domyślne parametry logowania: nazwa użytkownika: admin hasło: admin Jeśli połączenie jest ustanowione i logowanie ...

  • ModeCom MC-WR11 - page 40

    www .modecom.eu 40 Wireless router  Aby uruchomić kreator, który przeprowadzi cię krok po kroku przez proces konguracji kliknij na „Wizard”. Kreator podzielony jest na sześć etapów . Postępuj zgodnie z poleceniami by przep ...

  • ModeCom MC-WR11 - page 41

    41 Wireless router  Ustawienia serwera czasu umożliwiają kongurowanie, aktualizowanie i utrzymanie właściwego czasu na wewnętrznym zegarze systemowym. Time Zone Select: Wybierz odpowiednią strefę czasową z menu rozwija - nego. NTP Ser ...

  • ModeCom MC-WR11 - page 42

    www .modecom.eu 42 Wireless router T ryb 1: Klient DHCP Wybierz DHCP Clent w celu uzyskania adresu IP automatycznie od do - stawcy Internetu (ISP). Tryb ten jest powszechnie stosowany w przypadku stosowania modemu kablowego. T ryb 2: Static IP Wybierz opcję Static IP (stałego adresu IP), jeśli wszystkie informacje o adre - sie IP zostały dostar ...

  • ModeCom MC-WR11 - page 43

    43 Wireless router Adres IP: Wpisz adres IP przypisany przez usługodawcę internetowego (Inter - net Service Provider). Maska podsieci: Wprowadź maskę podsieci przypisaną przez ISP . Default Gateway: Wpisz adres bramy przydzielony przez ISP . DNS: Wpisz adres serwera DNS podany przez ISP . T ryb 3: PPPoE Wybierz PPPoE (Point to Point Protocol o ...

  • ModeCom MC-WR11 - page 44

    www .modecom.eu 44 Wireless router Adres IP: Wpisz adres IP . Maska podsieci: Wprowadź maskę podsieci. Adres IP serwera: Wprowadź adres IP serwera PPTP dostarczone przez ISP . Nazwa użytkownika: Wprowadź swoją nazwę użytkownika PPTP . Hasło: Wprowadź hasło PPTP . T ryb 5: L2TP Wybierz L2TP (Layer 2 Tunneling Protocol), jeśli usługodawc ...

  • ModeCom MC-WR11 - page 45

    45 Wireless router  Interfejs bezprzewodowy: Jeśli nie chcesz korzystać z bezprzewodowego, usuń zaznaczenie pola wyboru, aby wyłączyć wszystkie połączenia bez - przewodowe. Band: Obsługa 802.1 1b, 802.1 ...

  • ModeCom MC-WR11 - page 46

    www .modecom.eu 46 Wireless router  Zabezpiecz sieć bezprzewodową poprzez włączenie funkcji zabezpieczeń WP A lub WEP na routerze. W tej sekcji możesz ustawić tryb za ...

  • ModeCom MC-WR11 - page 47

    47 Wireless router • 128-bit: minimalna długość klucza: 13 znaków (dla kluczy składających się ze znaków “A-F”, “a-f”) 26 znaków (dla kluczy składających się z cyfr 0-9) Zalecane jest używanie kluczy składających się z małych i wielkich liter oraz cyfr – na przykład: “01234567890123456789aBcDEf” Poniższy rysunek p ...

  • ModeCom MC-WR11 - page 48

    www .modecom.eu 48 Wireless router    (WLAN) 4.1.1 WPS WPS został stworzony w celu ułatwienia konguracji sieci bezprz ...

  • ModeCom MC-WR11 - page 49

    49 Wireless router poczęta zostanie sesja WPS, w tym czasie migać będzie dioda WPS. Inne urządzenie sieciowe może połączyć się w tym czasie z routerem przez roz - poczęcie sesji WPS za pośrednictwem oprogramowania lub sprzętowego przycisku WPS. Dodatkowa uwaga – przytrzymanie przycisku WPS/Reset od 2 do 5 sekund spowoduje ponowne uruc ...

  • ModeCom MC-WR11 - page 50

    www .modecom.eu 50 Wireless router następnie włączyć funkcję WDS i podać adres MAC innego punktu dostę - powego, z którym router ma się komunikować. WDS obsługuje szyfrowanie WEP i tryb zabezpieczeń WP A. Oczywiście w celu prawidłowej pracy punktu dostępowego, musisz ustawić ten sam kanał i tryb zabezpieczeń co w źró - dłowym p ...

  • ModeCom MC-WR11 - page 51

    51 Wireless router na serwery lokalne posiadające prywatny adres IP . Innymi słowy , w zależno - ści od usługi (numeru portu TCP / UDP), router przekierowuje zewnętrzne żądanie usługi do odpowiedniego serwera wewnątrz sieci lokalnej. Status: Zaznacz pole „Enable” by aktywować funkcję przekierowania por- tów (Port Forwarding). Adres ...

  • ModeCom MC-WR11 - page 52

    www .modecom.eu 52 Wireless router Status: Włączenie i wyłączanie funkcji. T rigger Port Range: Zakres portów monitorowanych przez router dla ruchu wychodzącego. Połączenie wychodzące za pośrednictwem portu z tego za - kresu wyzwoli ustanawianie reguł . T rigger Protocol: Protokół używany przez Port Trigger: TCP , UDP lub oba (Both). ...

  • ModeCom MC-WR11 - page 53

    53 Wireless router Status: Włączenie i wyłączanie funkcji. Host IP Address: Wpisz adres IP hosta DMZ – używanie tej funkcji może narazić ten komputer na wiele zagrożeń. 4.2.4 Universal Plug and Play (UPnP) Funkcja UPnP pozwala urządzeniom uzyskać dostęp do lokalnych zaso - bów komputera lub innych urządzeń. Urządzenia UPnP mogą b ...

  • ModeCom MC-WR11 - page 54

    www .modecom.eu 54 Wireless router Ping Access on WAN: Czy zezwolić lub zablokować usługę ping z inter - fejsu WAN. IGMP Proxy: Prosty , dynamiczny Demon Multicast Routing używający tylko sygnalizacji IGMP . Jest on przeznaczony do łatwego przekazywania ruchu Multicast pomiędzy sieciami. Web Server Access on W AN: Czy pozwolić na dostęp d ...

  • ModeCom MC-WR11 - page 55

    55 Wireless router 2. Filtrowanie adresów MAC Przepuść lub zablokuj połączenia komputerów w oparciu o ich adresy MAC. 3. Filtr URL Możesz blokować niektóre adresy URL według słów kluczowych. Jeśli pole Source IP lub MAC jest puste, oznacza to, że wszystkie komputery nie mają ...

  • ModeCom MC-WR11 - page 56

    www .modecom.eu 56 Wireless router dostępu do tego adresu URL, w przeciwnym razie reguła jest ważna tylko dla jednego komputera z tym adresem IP lub MAC. Przykład 1: Blokuj adres „testurl.com” dla wszystkich komputerów . Przykład 2: Blokuj dostęp do adresów zawierających słowo kluczowe „test - keyword” dla jednego komputera o adre ...

  • ModeCom MC-WR11 - page 57

    57 Wireless router 4. Filtrowanie portów . Można ograniczyć dostęp niektórym lub wszystkim komputerom dostęp do adresu IP i portu docelowego. Przykład 1: Blokowanie dostępu do portu 21. Przykład 2: Blokowanie jednemu komputerowi (o adresie IP 192.168.1.101) dostępu do portu 21. ...

  • ModeCom MC-WR11 - page 58

    www .modecom.eu 58 Wireless router 4.3.3 Blokowanie ataków typu Denial of Service (DoS) T a strona zawiera ustawienia blokowania ataków DoS. ...

  • ModeCom MC-WR11 - page 59

    59 Wireless router  QoS pozwala zwiększyć wydajność np. w grach przez nadawanie priorytetu aplikacjom. Domyślnie kontrola pasma jest wyłączona, a pierwszeństwo aplikacji nie jest automatycznie klasykowane. W celu skongurowania Qos, wykonaj następujące kroki: Włącz QoS. Wpisz ...

  • ModeCom MC-WR11 - page 60

    www .modecom.eu 60 Wireless router 4.5 Router Setup Statyczna trasa to z góry określony szlak, którym pakiety danych muszą podróżować by dotrzeć do określonego hosta lub sieci. Static Route: Zaznacz pole „Enable”, aby umożliwić ustawienie trasy sta - tycznej. Adres IP: Adres IP docelowej sieci lub hosta. Subnet Mask: Docelowa maska p ...

  • ModeCom MC-WR11 - page 61

    61 Wireless router  Można wykonać kopię zapasową lub przywrócić kongurację systemu na tej stronie. Save to File (Zapisz do pliku): Zapisz ustawienia routera na komputerze lokalnym.   ? ...

  • ModeCom MC-WR11 - page 62

    www .modecom.eu 62 Wireless router  Aby zapewnić bezpieczeństwo routera, użytkownik zostanie poproszony o podanie nazwy użytkownika i hasła przy próbie dostępu do panelu kon - guracyjnego routera.     ? ...

  • ModeCom MC-WR11 - page 63

    63 Wireless router ENVIRONMENT PROTECTION: This symbol on our product nameplates proves its compatibility with the EU Direc- tive2002/96 concerning proper disposal of waste electric and electronic equipment (WEEE). By using the appropriate disposal systems you prevent the potential negative consequences of wrong product take-back that can pose risk ...

  • ModeCom MC-WR11 - page 64

    www .modecom.eu Copyright© 2010. MODECOM S.A. All rights reserved. MODECOM Logo is a registered trademark of MODECOM S.A. ...

Manufacturer ModeCom Category Router

Documents that we receive from a manufacturer of a ModeCom MC-WR11 can be divided into several groups. They are, among others:
- ModeCom technical drawings
- MC-WR11 manuals
- ModeCom product data sheets
- information booklets
- or energy labels ModeCom MC-WR11
All of them are important, but the most important information from the point of view of use of the device are in the user manual ModeCom MC-WR11.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ModeCom MC-WR11, service manual, brief instructions and user manuals ModeCom MC-WR11. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ModeCom MC-WR11.

A complete manual for the device ModeCom MC-WR11, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ModeCom MC-WR11 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ModeCom MC-WR11.

A complete ModeCom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ModeCom MC-WR11 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ModeCom MC-WR11, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ModeCom MC-WR11, that we can find in the current document
3. Tips how to use the basic functions of the device ModeCom MC-WR11 - which should help us in our first steps of using ModeCom MC-WR11
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ModeCom MC-WR11
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ModeCom MC-WR11 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ModeCom MC-WR11?

Use the form below

If you did not solve your problem by using a manual ModeCom MC-WR11, ask a question using the form below. If a user had a similar problem with ModeCom MC-WR11 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)