-
Digital Stream F1-FOX - page 1
F1-FOX Digital Set - T op Box for Free-T o-Air Remote Control Unit Specification Support & Copyright Safety STB Connections Reference Guide of Functions Guide of Main Menu Motorised System T rouble Shooting Guide Menu T ree 1~2 3~4 5 7~1 1 12~16 17~33 34~37 11 38~39 40 User's manual 6 ...
-
Digital Stream F1-FOX - page 2
Time key Displays the current time on the right side of the screen and is also used as the WHITE key in the menus and reservation. 1 1. Remote Control Unit (RCU) Information key Displays the programme information box on the screen and is also used as the RED key in the menus. i Soundtrack key Selects the soundtrack list for the current service and ...
-
Digital Stream F1-FOX - page 3
P+ Selects the service list and used to select the item in the menu mode. OK Returns to the previous menu and screen. EXIT 2 Standby key Switches between Operation and Standby mode. Selects the TV/ VCR/SAT mode. Numeric key Used to select the service and enter the channel information and PIN Code. Programme Up/Down key Used to tune to the next or p ...
-
Digital Stream F1-FOX - page 4
3 2. STB’S Specification Tuner & Channel Input Connector : F-type, IEC 169-24, Female Frequency Range : 950 MHz to 2150 MHz Input Impedance : 75 Ω unbalanced Signal Level : -25 to -65dBm IF Frequency : 480 MHz IF Band width : 36 MHz LNB Power & Polarisation : Vertical : +13.5V Horizontal : +18V Current : 500mA Max Overload Protection 22 ...
-
Digital Stream F1-FOX - page 5
4 A/V & Data In/Out TV SCART : Video Output(CVBS, RGB, S-VHS) Audio Output (Resolution : 20bit DAC, max 2 Vrms) VCR SCART : Video Output (CVBS) : Video Input(CVBS, RGB, S-VHS) Audio Output (Resolution : 20bit DAC, max 2 Vrms) AUDIO R/L : Cinch volume and Mute Control (Resolution : 20bit DAC, max 2 Vrms) RS232C : Transfer rate 115,200 bps 9 pin ...
-
Digital Stream F1-FOX - page 6
5 First and foremost, our knowledge of the set-top box marketplace along with technical expertise differentiates Humax. Moreover, we maintain very close working relationships with our customers. We take a highly disciplined engineering approach to product design, manufacture, testing, acceptance, and to technical and maintenance support. We conduct ...
-
Digital Stream F1-FOX - page 7
This STB has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully . MAINS SUPPLY : 190 ~ 250V AC 50/60Hz. OVERLOADING : Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS : Keep liquids away from the STB. CLE ...
-
Digital Stream F1-FOX - page 8
7 There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. Finally connect the coaxial cable from the LNB to the LNB IN socket on ...
-
Digital Stream F1-FOX - page 9
8 With Hi Fi System Connect an RCA/Cinch stereo cable from the AUDIO L, R sockets on the STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi Fi System. Set-up 2 STB Connection ...
-
Digital Stream F1-FOX - page 10
9 STB Connection TV with VCR Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. Finally connect the coaxial cable from the LNB to the LNB IN socket o ...
-
Digital Stream F1-FOX - page 11
10 TV with VCR and Motorised System (DiSEqC 1.2) Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. Connect one end of your coaxial cable to the LNB ...
-
Digital Stream F1-FOX - page 12
DiSEqC 1.0 Connection All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB at the same time. If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 swtich. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC sw ...
-
Digital Stream F1-FOX - page 13
LED of STB The message of the LEDs(Lighting-Emitting Diode) on the STB is explained as below. Upgrade via Satellite and Personal Computer To maintain the STB up-to-date, it will be possible to upgrade the software of the STB via satellite and personal computer. New versions of the software may include new or improved functions for the current one. ...
-
Digital Stream F1-FOX - page 14
13 Information Box (I-Plate) I-Plate displays when the key is pressed or when the service is changed. It shows the service part and event part. When you move to another service, the I-Plate should be displayed automatically. The time the I-Plate is displayed on screen is controlled in the Other Setting menu. SERVICE PART The contents of the service ...
-
Digital Stream F1-FOX - page 15
14 Service Change To change the service, enter the number by using the 0 ~ 9 keys. It is also possible to change the service by using the P+/ P- keys, / keys, Recall, Service list or EPG mode. To switch between the video and audio service, press the key. To select the previously viewed service list, press the RCL key in the normal A/V playback mode ...
-
Digital Stream F1-FOX - page 16
15 Subtitle The display of the subtitle are tramitted from the EBU teletext specification and DVB Bitmap. Press the key to bring up the subtitle language list for the current service. Use the / keys to select the desired language. Then press the OK key to select the highlighted language, the subtitles will now be displayed. To cancel the subtitle m ...
-
Digital Stream F1-FOX - page 17
16 In the advanced Service List, it is possible to list All or Favourite service list by using the colour keys as follows: (red) key - Service List All (green) key - Favourite A. Service All The / keys moves the highlight bar to the previous or next service, using the / keys moves the higlight bar forwards or backwards by 10 services. Select the de ...
-
Digital Stream F1-FOX - page 18
17 Main Menu The contents of main menu are as follows: 1. TV GUIDE It shows the programme information and the timer programming process of the service. Select the TV Guide mode by pressing the EPG key in the Video/Audio playback mode. 2. P ARENT AL CONTROL It is possible to control access to certain programmes by set- ting the parental level or cha ...
-
Digital Stream F1-FOX - page 19
1. TV GUIDE You can set the reservation and view the programme (event name) for each service in the TV Guide mode. To access this mode press the EPG key or selec t the TV Guide in the Main Menu. Change between the TV Guide and Radio Guide by pressing the key. In the TV guide mode, you can select between four different modes. (red) key - Shows Now o ...
-
Digital Stream F1-FOX - page 20
19 TV GUIDE-Quick mode. This mode shows in the A/V playback mode. The red line represents the current time and shows the programme progress status using a Black/White progress bar. The time range of the bar is made up from the past one hour and the next two hours. 2. P ARENT AL CONTROL In the Parental Control Menu, you can set the censorship classi ...
-
Digital Stream F1-FOX - page 21
move the cursor select the language you want to set on the language list return to the previous menu exit from the menu screen select the language you want to set confirm the language and returns to the Language Setting menu return to the language setting menu Language List 20 A. Language Setting Menu Language You can select the desired language on ...
-
Digital Stream F1-FOX - page 22
21 B. Time Setting Current time To set the current time, input the offset value by using the standardized information of current service area. The time setting will be used as the standardised time for the I-Plate, TV Guide and Wake-up / Sleep timer. Current time is based on the TDT(Time Description Table) at the stream of the current service. The ...
-
Digital Stream F1-FOX - page 23
22 D. Other Setting OSD Transparency Sets the level of transparency for the menus displayed on top of the video picture. Information Box Display Time Sets the length of time the information box displayed on the screen after changing the service. 3-2. Service Organising This menu gives users access to options that allow them to organise their Networ ...
-
Digital Stream F1-FOX - page 24
23 Skip 1. You can skip the services using the (blue) key. 2. The symbol " " will be marked beside the service name. 3. When skip is set for service, you will not be able to view it when moving through the channels using the P+/ P- keys. You will be able to view these services when selecting the channel using the 0 ~ 9 keys, service list ...
-
Digital Stream F1-FOX - page 25
24 To group the services into Favourite; 1. Move the cursor to 'All TV Services'- plate (right) by using the key. 2. Select the service you want to group into Favourite. 3. Press the OK key. 4. Move the cursor to "Favourite-plate"(left) by using the key. 5. Press the OK key to save the selected group. Note: You can move the curs ...
-
Digital Stream F1-FOX - page 26
25 C. Organise Networks You can edit the service by using the unit of network. In the above mentioned picture, the network names are displayed on the left side and the TV/Radio services con tained within the highlighted network are displayed on the right side. When the number of TV/Radio services for the network is too many to be displayed in the w ...
-
Digital Stream F1-FOX - page 27
26 Satellite Name Selects the satellite name that corresponds to the value of the Antenna Alternative. 1. Press the / keys to display the Satellite List box. 2. Select the wanted satellite name. 3. If the desired satellite name is not in the list then select User Defined. 4. The keyboard will appear and you can input the satellite name directly. Th ...
-
Digital Stream F1-FOX - page 28
27 Motorized System It is used to set the DiSEqC 1.2 motor by Eutelsat specifica- tion. If you wish to use this system, please refer to page 34 for instructions. Service Search OSD If you press the EXIT key during the search, service search stops and the searching menu appears. When you find all the services the following picture appears. Before sa ...
-
Digital Stream F1-FOX - page 29
move the cursor select the searching parameters input the frequency, symbol rate directly exit from the menu screen start the SMATV search return to the previous menu 28 B. Manual Search After setting the search parameters like frequency, symbol rate etc., you can find the services manually in the transponder you have selected. Antenna Alternative ...
-
Digital Stream F1-FOX - page 30
29 Polarisation Select the polarisation of the transponder you want to find. (Horizontal/ Vertical/ Auto.) In horizontal case, 18V and in vertical case, 13V are output through LNB line. Symbol Rate Inputs the symbol rate of the transponder you want to find. FEC (Forward Error Correction) Select the FEC of the transponder you want to find. You can s ...
-
Digital Stream F1-FOX - page 31
30 Advanced... Performs a manual search with the ability to enter PID(Video/Audio/PCR) values. This mode is necessary when the signal you search for a signal. The setting of the sub items is the same as Manual Search. Video PID/ Audio PID/ PCR PID You can set the PID to search the service. It is possible that you input PID by decimal or hexadecimal ...
-
Digital Stream F1-FOX - page 32
move the cursor select the searching parameters and type exit from the menu screen start the Automatic search return to the previous menu input the symbol rate directly 31 C. Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency. Antenna Alt ...
-
Digital Stream F1-FOX - page 33
32 Automatic Skip Option to search only Free-To-Air services. The picture on the right tries to search with varying frequency, symbol rate and FEC etc. Note: But, the user should select the satellite name in Antenna Setting menu and when the user inputs the satellite name separately, you should select the Detail mode. Press the OK key anywhere to s ...
-
Digital Stream F1-FOX - page 34
33 C. STB Upgrade You can download and upgrade the software of this STB through ASTRA satellite when the software of new version is released. During downloading don’t turn off the STB. In case of power off turn on the STB and the downloading process will be continued. 3-5 Default Setting When you press the OK key at the screen as blow, the data o ...
-
Digital Stream F1-FOX - page 35
DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can take advantage of the DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites and to search for the channels(STAB Rotor Sat motor recommended). 1. Satellite Setting Menu Option ...
-
Digital Stream F1-FOX - page 36
...
-
Digital Stream F1-FOX - page 37
10. Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish. 11. Use the / keys to stop the motor when required. 12. When you have the best position of the dish go to the Motor Control option and using the / keys select Store and press the OK key. The position of the satellite should now be stored. ...
-
Digital Stream F1-FOX - page 38
...
-
Digital Stream F1-FOX - page 39
T rouble Shooting Guide About STB Problem Solution Does not display any message on the front panel or STB has no power. Check the main power cable and check that it is plugged into a suitable power outlet. Check whether STB is in Standby mode. No Picture Ensure that the STB is switched on (see above). Check the video output port (SCART) is firmly c ...
-
Digital Stream F1-FOX - page 40
...
-
Digital Stream F1-FOX - page 41
40 ...
-
Digital Stream F1-FOX - page 42
...
-
Digital Stream F1-FOX - page 43
HQFOX.200 ...
Do you have a question concerning Digital Stream F1-FOX?
Use the form below
If you did not solve your problem by using a manual Digital Stream F1-FOX, ask a question using the form below. If a user had a similar problem with Digital Stream F1-FOX it is likely that he will want to share the way to solve it.