English dropdown-ico

Manual Huffy Universal Elevator Mount

11 pages 0.44 mb
Download

Go to site of 11

Summary
  • Huffy Universal Elevator Mount - page 1

    1 10/01 P/N 211125A Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. A Huffy Company Required T ools and Materials: NOTE: Due to various mounting methods, additional tools and materials may be required. • Two People • Tape Measure • Pencil • Wrenches: (Two) 7/16”, 1/2”, 9/16”, 3/4” or Large and Small ...

  • Huffy Universal Elevator Mount - page 2

    2 P/N 211125A 10/01  WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit.  See instruction manual for proper installation and  maintenance. Use caution when performing dunk type activities on this ...

  • Huffy Universal Elevator Mount - page 3

    3 10/01 P/N 211125A IMPORT ANT! WRITE DOWN MODEL NUMBER FROM BOX ON P AGE 1 OF THIS OWNERS MANUAL 1. ROOF MOUNTING 2. 3 4 Secure struts (3) to upper holes on u-channel (2). NOTE: Position flat side of strut on u-channel. Tighten until snug. SLANT ROOF FLA T ROOF Install angle brackets (6 and 7) to lower holes on u-channel (2) and position angle bra ...

  • Huffy Universal Elevator Mount - page 4

    4 P/N 211125A 10/01 Drill holes in roof. Position angled brackets and secure to roof. NOTE: Hardware for this procedure not included due to various roof construction materials and design structure. NOTE: Two people recommended for this procedure. Hold angled brackets (6 and 7) on roof and keep u-channel (2) upright. Measure from top of playing surf ...

  • Huffy Universal Elevator Mount - page 5

    5 10/01 P/N 211125A 19 11 21 17 22 19 20 10 IMPORT ANT! Test fit bolts into holes of brackets (8) and carefully rock them in a circular motion to ream out paint from holes if necessary. IMPORT ANT! Finger tighten nuts and bolts until instructed to fully tighten later. Fit spacer (11) into pawl (13) and fit pin of pawl through end slot of release le ...

  • Huffy Universal Elevator Mount - page 6

    6 P/N 211125A 10/01 Assemble elevator tubes (17) to backboard bracket (8). 22 19 18 17 Backboard and Rim NOT Included 8 17 13. Starting with nuts flush against bracket (8), secure rim and bracket to backboard. NOTE: Mounting nuts and bolts not included. Bend bracket (8) to line up with holes in backboard and secure. 1 1. 12. 8 19 NOTE: Do not use w ...

  • Huffy Universal Elevator Mount - page 7

    7 10/01 P/N 211125A 14. NOTE: Two people are required for this procedure, use caution, elevator assembly is heavy. Attach backboard and elevator assembly to u-channel (2). Insert the end of a broom handle or wooden dowel 3/4”-7/8” diameter (19-22 mm) into the release lever. 15. HEIGHT ADJUSTMENT Push up and move away from tube to raise and lowe ...

  • Huffy Universal Elevator Mount - page 8

    8 P/N 211125A 10/01 FOR POLE MOUNTING ONL Y 1. Assemble mounting brackets (24) to 3-1/2” (8.9 cm) pole as shown. Position bracket assembly to approx. 106” (2.7 m) above level playing surface. Tighten nuts (28) completely. NOTE: Equal rotations of nuts on each side of u-bolt (25) are necessary. 2. NOTE: Two people required for this procedure, el ...

  • Huffy Universal Elevator Mount - page 9

    9 10/01 P/N 211125A FLA T SURF ACE MOUNTING 1. A solid mounting base and/or surface, capable of withstanding normal recreational use forces, must be provided by the customer. A reliable carpenter or building contractor should be consulted if there are questions regarding this procedure. W ARNING MOUNTING HOLE PATTERN 2. Secure mounting brackets (24 ...

  • Huffy Universal Elevator Mount - page 10

    10 P/N 211125A 10/01 3. NOTE: Two people required for this procedure, elevator assembly is heavy. Mount assembled elevator components to mounting brackets (24) as shown. (Refer to Steps 6 through 13 for elevator assembly.) 22 18 10 ft. (3.05 m) REGULATION RIM HEIGHT IS 10 FEET (3.05 m). 24 ...

  • Huffy Universal Elevator Mount - page 11

    11 10/01 P/N 211125A Item #5 (2) HARDW ARE IDENTIFIER PA R TS LIST * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. Item #4 (2) Item Qty. Part No. Description 11 206117 Label, Warning 21 906377 U-Channel 32 906206 Struts 42 202662 Bolt, Hex Head 5/16-18 x 4-1/2 52 203099 Nut, Lock 5/16-18 61 906350 Bracket, Angled, Left 71 906349 Bracket, Angled, Right ...

Manufacturer Huffy Category Board Games

Documents that we receive from a manufacturer of a Huffy Universal Elevator Mount can be divided into several groups. They are, among others:
- Huffy technical drawings
- Universal Elevator Mount manuals
- Huffy product data sheets
- information booklets
- or energy labels Huffy Universal Elevator Mount
All of them are important, but the most important information from the point of view of use of the device are in the user manual Huffy Universal Elevator Mount.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Huffy Universal Elevator Mount, service manual, brief instructions and user manuals Huffy Universal Elevator Mount. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Huffy Universal Elevator Mount.

Similar manuals

A complete manual for the device Huffy Universal Elevator Mount, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Huffy Universal Elevator Mount by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Huffy Universal Elevator Mount.

A complete Huffy manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Huffy Universal Elevator Mount - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Huffy Universal Elevator Mount, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Huffy Universal Elevator Mount, that we can find in the current document
3. Tips how to use the basic functions of the device Huffy Universal Elevator Mount - which should help us in our first steps of using Huffy Universal Elevator Mount
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Huffy Universal Elevator Mount
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Huffy Universal Elevator Mount in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Huffy Universal Elevator Mount?

Use the form below

If you did not solve your problem by using a manual Huffy Universal Elevator Mount, ask a question using the form below. If a user had a similar problem with Huffy Universal Elevator Mount it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)