English dropdown-ico

Manual Summit SCFF-55

9 pages 0.13 mb
Download

Go to site of 9

Summary
  • Summit SCFF-55 - page 1

    FELIX ST OR CH, INC. SUMMIT APPLIANCE DIVISION® INSTRUCTION MANUAL FOR MODEL: SCFF-55 ALL-FREEZER ...

  • Summit SCFF-55 - page 2

    *Before Putting Into UsE* Before connecting the appliance to the power supply, leave it standing for about 2 hours, this will reduce the possibility of malfunctions in the cooling system due to transport handling. Clean the appliance thoroughl y; especially in the in terior (See Cleaning and Maintenance). In case the interior accessories are no t c ...

  • Summit SCFF-55 - page 3

    IMPORTANT If you bought this appliance to repla ce an old one equipped with a lock that cannot be opened fro m inside (lock, bolt), make sure that the lock is broken. This will make it impossib le for children to lock themselves inside the appliance and suffocate. The appliance must be correctly connected to the power supply. If the food has a stra ...

  • Summit SCFF-55 - page 4

    PLACING AND INSTALLATION It is important to make sure the applian ce is leveled evenly to prevent falling. Two spacers attached to the appliance mu st be fitted onto the upper edge of the condenser, thus preventing the applia nce from being installed too close to the wall. Spacers are manufactured for all-pu rpose functions depending on the distanc ...

  • Summit SCFF-55 - page 5

    Storing Fresh Foods Food to be stored in the freezer should be properly packed as to prevent mixing various moisture degrees and odors (in polyethylene bags or sheet, alum inum foil, wax paper, covered containers or bottles). Never store any inflammable, volatile or explosive substances. Food should not touch the rear wall of the freezer. Some orga ...

  • Summit SCFF-55 - page 6

    Self-defrosting There is no need to defrost the fre ezer, because this appliance is self-defrosting. Cleaning the Appliance Disconnect the power supply before cleaning the appliance. Do not use coarse or aggressive cleaning ag ents as you can damage the surface. Clean the exterior with water and a m ild detergent. Varnished surfaces are cleaned wit ...

  • Summit SCFF-55 - page 7

    Trouble-Shooting Guide During the service of your appliance, you can come across some trouble that in most cases result from improper handling of the appliance th at can easily be eliminated. Appliance Fails to Operate Aft er Connecting to the Power Supply : Check the supply in the outlet socket and make sure the appliance is switched on (thermosta ...

  • Summit SCFF-55 - page 8

    Door swing reversal ( Stainless steel models with towel bar handles do not have reversible doors.) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared at the factory 1. Remove the top hinge cover and hinge (on models w ith a tabletop, remove the botto ...

  • Summit SCFF-55 - page 9

    Noise During the operation of the compressor, a liquid n oise is heard and when the compressor is not op erating a refrigerant flow is heard. This is a normal condition and it has no influence whatsoever on the lif etim e of the appliance. After starting the appliance, the operation of the compressor and the refrigerant flow may be louder and this ...

Manufacturer Summit Category Freezer

Documents that we receive from a manufacturer of a Summit SCFF-55 can be divided into several groups. They are, among others:
- Summit technical drawings
- SCFF-55 manuals
- Summit product data sheets
- information booklets
- or energy labels Summit SCFF-55
All of them are important, but the most important information from the point of view of use of the device are in the user manual Summit SCFF-55.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Summit SCFF-55, service manual, brief instructions and user manuals Summit SCFF-55. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Summit SCFF-55.

Similar manuals

A complete manual for the device Summit SCFF-55, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Summit SCFF-55 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Summit SCFF-55.

A complete Summit manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Summit SCFF-55 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Summit SCFF-55, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Summit SCFF-55, that we can find in the current document
3. Tips how to use the basic functions of the device Summit SCFF-55 - which should help us in our first steps of using Summit SCFF-55
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Summit SCFF-55
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Summit SCFF-55 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Summit SCFF-55?

Use the form below

If you did not solve your problem by using a manual Summit SCFF-55, ask a question using the form below. If a user had a similar problem with Summit SCFF-55 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)