-
U-Line SS1095 - page 1
Use and Car e Guide MARINE SERIES Ice Maker Model: SS1095 ...
-
U-Line SS1095 - page 2
2S S 1 0 9 5 MARINE SERIES Congratulations on your purchase of a U-Line refrigeration product. A pioneer in the field for more than 40 years, U-Line Corporation is the world’ s numbe r one manufacturer of bu ilt-in, under -counter , specialt y refri geration and ic e making products. U- Line dedicat es 100% of its resea rch and develo pment to th ...
-
U-Line SS1095 - page 3
SS1095 3 MARINE SERIES Introduction .. ................. .............. .............. ................. .............. .............. ...... Inside Front Cov er Warranty Registration ............ ................. ..... ...... ................. .............. ... Inside Front Cover Please Record Your M odel Information ............... ............ ...
-
U-Line SS1095 - page 4
4S S 1 0 9 5 MARINE SERIES IMPORT ANT IMPORT ANT PLEASE READ all instruct ions completely before attempting to install, operate, or ser vice your unit. • Proper installation pr ocedures must be followed if this unit is being initially installed, or is moved to a new location after being in service. An INST ALLA TION GUIDE for your unit, providing ...
-
U-Line SS1095 - page 5
SS1095 5 MARINE SERIES Origins Ice Maker Model SS1095 All Origins Ice Makers provi de high daily ice production and storage capab ilities, and conserve on wa ter , us ing only 2-3/4 gallons (10.4 L) to produc e approximat ely 22 lbs (10 kg) of ice. • Model SS1095 produces up to 23 lbs (10.4 kg) of ice per day and will store 12 lbs (5.4 kg). • T ...
-
U-Line SS1095 - page 6
6S S 1 0 9 5 MARINE SERIES Figure 5 Ice producti on may be interrupte d by raising the bi n arm into an upright an d locked posi tion (Figure 5) . The unit will maintain temperature for ice storage. IMPORT ANT IMPORT ANT If you are not intending to use the ice maker and turn the supply v alve off, it is imperative to raise the bin arm of the ice m ...
-
U-Line SS1095 - page 7
SS1095 7 MARINE SERIES WAR NI NG Electrical Shock Hazard. Disconnect power before servicing. Before operating, r eplace all panels. Failure to do so may r esult in death or electrical shock. 1. Remove all consumable contents from the unit. 2. Disconnect power to the unit. 3. Shut off water supply to the unit at the main water source. IMPORT ANT IMP ...
-
U-Line SS1095 - page 8
8S S 1 0 9 5 MARINE SERIES Proper cleaning and maintenanc e of y our U-Line produc t will ensure efficiency , top pe rformance and long life. The maintenance intervals li sted are based on normal conditions . Y ou may want to shorten the intervals if you have pet s or ot her sp ecial considerations. Interior Cleaning (As Required) • T urn unit of ...
-
U-Line SS1095 - page 9
SS1095 9 MARINE SERIES 1. Disconnect electrical power to the unit. 2. With a standard blade screwdriver or 1/4" nut driver , remove the grille screw (Figure 8) . 3. Remove the gril le. WAR NI NG DO NOT touch the condenser fins. The condenser fins are SHARP and c an be easily damaged. IMPORT ANT IMPORT ANT DO NOT use any type of clea ner on the ...
-
U-Line SS1095 - page 10
10 SS1095 MARINE SERIES SS1095FD model: Align the tabs on the bottom of the grille with the slots in the flange and swing grille up into position. Align the grille and cabinet screw holes (Figure 8) . 10. Insert the grille screw (Figure 8) and tighten. Do not over-tighten. 11. Reconnect power to the unit. Ice Cube Thickness Adjustm ent Interval - A ...
-
U-Line SS1095 - page 11
SS1095 11 MARINE SERIES Door Alignment Check and Adjustment IMPORT ANT IMPORT ANT Properly aligned, the door’ s gasket should be firmly in contact with the cabinet all the way ar ound the door (no gaps). Carefully examine the door’ s gasket to assure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on ...
-
U-Line SS1095 - page 12
12 SS1095 MARINE SERIES 6. Install hinge on opposite side, bottom of cabinet (Figure 18) . Align hinge outer ed ge with cabinet before tightening screws. Figure 18 Figure 19 7. Relocate plastic spacer/bushing (Figure 19) on top and bottom of door to oppos ite side. Clean out bushing hole in doo r bottom with a screwdriver if necessary . 8. Using a ...
-
U-Line SS1095 - page 13
SS1095 13 MARINE SERIES 13. Remove all three screws on the opposite side of the hinge and carefully lift of f the door latch assembly (Figure 23) . Figure 23 14. Place the door latch assembly on opposite side of unit . Be sure to tighten all three screws securely (Figure 24). 15. Place door on lower hinge pin. Invert and install upper hinge on door ...
-
U-Line SS1095 - page 14
14 SS1095 MARINE SERIES DANGER ELECTROCUTION HAZA RD! Never att empt to repair or perform maintenance on the unit unitl the main electrical power has been disconnecte d. T roubleshooting - What to check when problems occur: 8 T roubleshooting Guide PROBLEM POSSIBLE CAU SE REMEDY The unit frosts up. Unit is manual defrost mode l. Defrost unit manual ...
-
U-Line SS1095 - page 15
SS1095 15 MARINE SERIES U-LINE CORPORATION LIMITED W ARRANTY U-Line Corporation warrants each U-Line product to be free from defects in m aterials and workmanship for a period of one year from the date of purchase; and warra nts the sealed system (consist ing of the co mpressor , the condenser , the evaporator , the hot gas bypass valve, the dryer ...
-
U-Line SS1095 - page 16
For General Inquiries: P .O. Box 245040 Milwaukee, Wisconsin 53224-9540 U.S.A. Phone (800) 779-2547 F AX (414) 354-5696 www .U-Line.com For Service and Parts Assistance: Phone (800) 779-2547 (414) 354-0300 F AX (414) 354-5696 Email: OnLineService@U-Line.com www .U-LineService.com E-mail: OnlineParts@u-line.com For more than four decades, U-Line has ...
Do you have a question concerning U-Line SS1095?
Use the form below
If you did not solve your problem by using a manual U-Line SS1095, ask a question using the form below. If a user had a similar problem with U-Line SS1095 it is likely that he will want to share the way to solve it.