-
Tripp Lite B126-1P0 - page 1
1 Owner ’s Manual 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support Copyright © 2011 T ripp Lite. All rights reserved. HDMI over Cat5 Extenders and Extender/Splitters Extender Kit Model: B126-1A1 and B126-1A1- WP Local Unit Models: B126-002 and B126-004 Remote Unit Models: B126-1P0, B126-1P0- WP-1, B126-1A0, B126-1A0- WP-1 a ...
-
Tripp Lite B126-1P0 - page 2
2 P ackage Contents Product F eatures B126-1A1 B126-1A1- WP B126-002 B126-004 B126-1A0 B126-1A0- WP-1 B126-1P0 B126-1P0- WP-1 B126-110 Local Unit (L), Remote Unit (R), or Both (B) B B L L R R R R R External Power Supplies (0, 1, or 2) 221111001 Mounting Hardware X X X X X Wallplate Screws X X X Screwdriver for Equalization Adjustment X X X X X HDMI ...
-
Tripp Lite B126-1P0 - page 3
3 Product F eatures B126-1A1 • HDMIoverCat5ActiveExtenderKit(Box-style) • Extendsa1080i(60Hz)signalupto200ft.fromthesource,ora 1080p(60Hz)signalupto150ft.fromthesource • FeaturesanadditionalHDMIportonthelocaltransmitterun ...
-
Tripp Lite B126-1P0 - page 4
4 Product F eatures B126-004 • 4-PortHDMIoverCat5Extender/SplitterLocalT ransmitterUnit (Box-style) • SplitsanHDMIsignalinto4 • FeaturesanadditionalHDMIport,whichcanbeusedtoconnecta local monitor or to daisy-chain additional B126-004 units. Upto3B126- ...
-
Tripp Lite B126-1P0 - page 5
5 Product F eatures B126-1A0- WP-1 • HDMIoverCat5ActiveExtenderWallplate • WorkswithB126-002andB126-004extender/splitterstoextend a1080i(60Hz)signalupto200ft.fromthesource,ora1080p (60Hz)signalupto150ft.fromthesource • Features ...
-
Tripp Lite B126-1P0 - page 6
6 Product F eatures B126-110 • HDMIoverCat5ActiveExtenderRemote/RepeaterUnit(Box-style) • ExtendsandexpandsT rippLiteHDMIoverCat5installation,allowing multiple monitors to be located at different points in a chain of up to 700ft. • Extendsa1080i(60Hz)signalupto? ...
-
Tripp Lite B126-1P0 - page 7
7 Mounting Instructions (select models only) The B126-002, B126-004, B126-1A1, B126-1A0 and B126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods.Note:TheB126-004canalsobe? ...
-
Tripp Lite B126-1P0 - page 8
OPTIONAL LOCAL MONIT OR LOCAL TRANSMITTER REMO TE RECEIVER Up to 200 ft. at 1080i (60Hz) Up to 150 ft. at 1080p (60Hz) BLU-RA Y 8 Standard Extender Kit Installation Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) T o achieve maximum distance and performance, use 24 AWG solid wire ...
-
Tripp Lite B126-1P0 - page 9
9 Standard Extender Kit Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-1A1or B126-1A1- WPlocalunitusingaT rippLiteP568-SeriesHDMICable. 3 Optional for B126-1A1: Connect a local monitor to the LOCAL port ontheB126-1A1local ...
-
Tripp Lite B126-1P0 - page 10
OPTIONAL LOCAL MONITOR B126-1A1 LOCAL TRANSMITTER B126-1A1 REMOTE RECEIVER B126-110 REMOTE REPEA TER B126-110 REMOTE REPEA TER B126-110 REMOTE REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) BLU-RA Y Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 17 ...
-
Tripp Lite B126-1P0 - page 11
11 Extender Kit with Remote/R epeater Installation 3 Optional for B126-1A1: Connect a local monitor to the LOCAL HDMIportusingaT rippLiteP568-SeriesHDMICable. 4 Connect the external power supply to the local unit and plug it into a T ripp Lite Surge Suppressor , PDU or UPS. The green LED illuminates to indicate the unit is r ...
-
Tripp Lite B126-1P0 - page 12
12 Extender Kit with Remote/R epeater Installation 11 T oaddathirdremote/repeaterunit,repeatsteps8through10. T onishyourinstallationwiththeB126-1A1orB126-1A1- WP remote receiver unit, proceed to step 12. 12 UsingCat5e/6cable,connecttheRJ45OUTPUTportonthelas ...
-
Tripp Lite B126-1P0 - page 13
B126-004 OPTIONAL LOCAL MONITOR BLU-RA Y B126-1P0-WP-1 B126-1A0-WP-1 B126-1P0 B126-1A0 Up to 100 ft. at 1080i (60Hz) Up to 50 ft. at 1080p (60Hz) Up to 200 ft. at 1080i (60Hz) Up to 150 ft. at 1080p (60Hz) 13 Standard Extender/Splitter Installation Notes: 1) T est to make sure the entire installation works properly before pulling cables through cei ...
-
Tripp Lite B126-1P0 - page 14
14 Standard Extender/Splitter Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-002or B126-004usingaT rippLiteP568-SeriesHDMICable. 3 Optional for B126-004: Connect an HDMI monitor to the LOCAL portontheB126-004usingaT ri ...
-
Tripp Lite B126-1P0 - page 15
15 Standard Extender/Splitter Installation 10 Repeat step 9 for each additional monitor you are connecting. 11 T urnonthepowertotheHDMIsource.TheorangeRJ45LEDs illuminate on the B126-002 and B126-004 to indicate the unit is receiving a signal from the source. The screen should now be displayed on the connected mo ...
-
Tripp Lite B126-1P0 - page 16
OPTIONAL LOCAL MONITOR B126-004 LOCAL TRANSMITTER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) BLU-RA Y B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 ...
-
Tripp Lite B126-1P0 - page 17
17 Extender/Splitter with Remote/R epeater Installation 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-002or B126-004usingaT rippLiteP568-SeriesHDMICable. 3 Optional for B126-004: Connect a local monitor to the LOCAL HDMIportusingaT ripp ...
-
Tripp Lite B126-1P0 - page 18
18 Extender/Splitter with Remote/R epeater Installation 10 Connect the external power supply to the remote/repeater unit and plug it into a T ripp Lite Surge Suppressor , PDU or UPS. The green powerLEDandthegreenRJ45LEDsilluminatetoindicatetheunit is receiving power . 11 T oaddathirdremote/repeater ...
-
Tripp Lite B126-1P0 - page 19
19 Extender/Splitter Daisy-Chain Installation (B126-004 only) Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) T o achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24 AWG, ...
-
Tripp Lite B126-1P0 - page 20
Le vel 1 Le vel 2 Le vel 3 OPTIONAL LOCAL MONIT OR BLU-RA Y 20 Extender/Splitter Daisy-Chain Installation (B126-004 only) 201109206-93-3023-EN.indd 20 10/24/2011 10:01:23 AM ...
-
Tripp Lite B126-1P0 - page 21
21 Extender/Splitter Daisy-Chain Installation (B126-004 only) 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-004using aT rippLiteP568-SeriesHDMICable. 3 ConnecttheLOCALportontheB126-004totheINPUTportona second B126-0 ...
-
Tripp Lite B126-1P0 - page 22
22 12 ConnecttheB126-1P0HDMIconnectortoamonitor;or ,connect the B126-1P0- WP-1, B126-1A0 or B126-1A0- WP-1 to a monitor usingaT rippLiteP568-SeriesHDMICable.Boththegreenand orangeRJ45LEDsontheB126-1P0,andthegreenLEDonthe B126-1P0- WP-1, illuminate to ...
-
Tripp Lite B126-1P0 - page 23
23 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) Notes: 1) T est to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) T o achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) siz ...
-
Tripp Lite B126-1P0 - page 24
OPTIONAL LOCAL MONITOR B126-004 LOCAL TRANSMITTER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) BLU-RA Y B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 REMOTE/ REPEA TER B126-110 ...
-
Tripp Lite B126-1P0 - page 25
25 1 Make sure the HDMI source is powered OFF . 2 ConnecttheHDMIsourcetotheINPUTportontheB126-004using aT rippLiteP568-SeriesHDMICable. 3 ConnecttheLOCALportontheB126-004totheINPUTportona second B126-004 using the included 1-ft. HDMI daisy-chain cable. 4 Repea ...
-
Tripp Lite B126-1P0 - page 26
26 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) 11 UsingCat5e/6cable,connecttheRJ45OUTPUTportontherst remote/repeaterunittotheRJ45INPUTportonasecondremote/ repeater unit. 12 Connect a monitor to the HDMI OUTPUT port on the remote/repeater unitth ...
-
Tripp Lite B126-1P0 - page 27
27 Extender/Splitter Daisy-Chain with Remote/R epeater Installation (B126-004 only) 20 If necessary , use the Equalization control on the remote/repeater unit(s) and remote receiver unit to adjust the video image. Note: An improper Equalization setting can cause the monitor not to display a picture at all. T ry each Equalization setting until an ac ...
-
Tripp Lite B126-1P0 - page 28
28 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/support 201109206•933023 WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from T ri ...
Do you have a question concerning Tripp Lite B126-1P0?
Use the form below
If you did not solve your problem by using a manual Tripp Lite B126-1P0, ask a question using the form below. If a user had a similar problem with Tripp Lite B126-1P0 it is likely that he will want to share the way to solve it.