-
Mobi Technologies 70062 - page 1
70062 ...
-
Mobi Technologies 70062 - page 2
T able of Contents Package Contents 1 Features 2 FCC Regulation 3 Monitor Features & Controls 4 Camera Features & Controls 5 Important Safety Instructions 6 Battery Installation & Set-Up 7 Camera Operation & Installation 8 Monitor Operation & Installation 9 T roubleshooting 12 W arranty 13 ...
-
Mobi Technologies 70062 - page 3
Introduction Congratulations on the purchase of the MobiCam ® Digital W ireless V ideo Moni- toring System, which incorporates the latest in wireless technology . W e are sure that you will be pleased with the quality and features of this product. W e recom- mend that you read these instructions carefully before use. The MobiCam ® Digital W irele ...
-
Mobi Technologies 70062 - page 4
Featur es • DigiLock ™ W ireless with (FHSS) technology for private and secure, noise-free performance • No installation needed, ready to use out of the box • Compact design for easy portability • T ransmission range up to 900 ft. outdoors and 450 ft. indoors Note: Actual range can vary depending on the envir onment. • Automatic Night V ...
-
Mobi Technologies 70062 - page 5
FCC Regulation This equipment has been tested and found to comply with the requirements of the FCC. These requirements are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener - ates, uses, and can radiate radio frequency energy , and if not installed and used in accordance with ...
-
Mobi Technologies 70062 - page 6
Monitor Features & Contr ols Monitor Unit Front 1 - 2.4” Color LCD Screen 2 - V olume Control 3 - Brightness Control 4 - Power ON LED Indicator 5 - LCD and Power ON/OFF 6 - A V Output 7 - DC Power input Monitor Unit Rear 8 - Speaker 9 - T ilt Screen Release 10 - Antenna 1 1 - Channel Selector/Scan Mode 12 - Battery Door 8 5 2 11 9 6 3 12 7 4 ...
-
Mobi Technologies 70062 - page 7
Camera Featur es & Controls 14 22 17 21 15 18 13 19 16 20 Camera Unit Bottom 19 - Link/Code Key 20 - DC Power Input 21 - Night Light Mode Switch 22 - V oice Activation (VOX) Switch Camera Unit Front 13 - Night Light 14 - IR Night V ision LED’ s 15 - Lens 16 - Microphone 17 - Light Sensor 18 - Power ON/OFF with LED 5 ...
-
Mobi Technologies 70062 - page 8
Important Safety Instructions Please read this instruction manual before using your MobiCam ® Digital W ire- less Monitor . When using electrical appliances, basic safety precautions should always be followed. Please keep this information for future reference. • Periodically examine this product for damage to the cord, housing or other parts tha ...
-
Mobi Technologies 70062 - page 9
• Remove the battery from the Monitor during long periods of non-use. • Unplug the AC adaptors from the Monitor and Camera during periods of non use. T o disconnect from the power supply , grip the transformer and pull from the power socket. Never pull by the cord. • Replace battery with the same equivalent type. Please dispose of old, defect ...
-
Mobi Technologies 70062 - page 10
Camera Operation & Installation Power ON/OFF T o turn ON the camera unit, press the ON/OFF button located at the front of the camera (18) for about 1 second or until back lighting of the switch is turned on. CAMERA MODES: V oice Activation Mode (VOX) V oice Activation (VOX) mode allows your camera to go to sleep when there is no sound in the ro ...
-
Mobi Technologies 70062 - page 11
Monitor Operation & Installation NOTE: For best performance it is r ecommended to keep units at least 7-8 feet away fr om other wir eless devices. Power ON/OFF T o turn on the monitor unit, slide the LCD Power On/Of f switch (5), located on the right side of the monitor , to the “ON” position. LCD Off When the LCD Power On/Off switch (5) is ...
-
Mobi Technologies 70062 - page 12
• Slide the channel selection switch (1 1) to select the desired Channel (A, B, C). • Press and hold the “+” brightness button marked B (3) and turn the monitor ON (5) simultaneously . • The monitor will display the word “P AIRED” • T urn off both the Camera and Monitor , then turn both units back on and the pairing process is compl ...
-
Mobi Technologies 70062 - page 13
Brightness Control & V olume Control The brightness control of the LCD can be adjusted by pressing the Brightness Control Button (“B”) located on the front of the Monitor (3). Press the “ + ” to increase and “ – ” to decrease the brightness of the LCD. The volume control of the LCD can be adjusted by pressing the V olume Control B ...
-
Mobi Technologies 70062 - page 14
T r oubleshooting 12 PROBLEM Screen turns on and off No reception at Monitor No picture display but can hear sound Only Black & White picture displayed Batteries cannot be recharged Camera will not link Channels Keep Switching Back and Forth NORMAL SOLUTIONS • The “VOX” mode is selected on the camera, when there is no noise detected by th ...
-
Mobi Technologies 70062 - page 15
Limited W arranty Mobi T echnologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi T echnologies, Inc. will, at its option, either replace or repair it without charge. A ...
-
Mobi Technologies 70062 - page 16
CAM- 1 CAM- 2 CAM- 3 Expand Y our Monitoring Possibilities... The available MobiCam ® Digital Additional Camera (#70063, sold separately) can be added to your system (for a total of 2 or 3) so you can switch between them, either automatically , or at the touch of a button. Look for these accessories at your favorite retailer or online at www .getm ...
Do you have a question concerning Mobi Technologies 70062?
Use the form below
If you did not solve your problem by using a manual Mobi Technologies 70062, ask a question using the form below. If a user had a similar problem with Mobi Technologies 70062 it is likely that he will want to share the way to solve it.