English dropdown-ico

Manual Smeg PGF95F-1

16 pages 0.99 mb
Download

Go to site of 16

Summary
  • Smeg PGF95F-1 - page 1

    Summary 1 INSTRUCTIONS FOR SAFE AND PROPER USE ______________ 20 2 POSITIONING OF THE HOB ______________________________ 22 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS ______________ 29 4 FINAL OPERATIONS ____________________________________ 31 5 USING THE HOB _______________________________________ 32 6 CLEANING AND MAINTENANCE ________________________ ...

  • Smeg PGF95F-1 - page 2

    Introduction 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS EN TIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE HOB. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION ...

  • Smeg PGF95F-1 - page 3

    Introduction THE APPLIANCE DATA PLATE, WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME, IS POSITIONED AT A VISIBLE POINT UNDER THE SAFETY COVER. THE DATA PLATE ON THE PROTECTIVE COVER MUST NEVER BE REMOVED . DO NOT PUT PANS WITHOUT PERFECTLY PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE HOB PANSTAND GRIDS. DO NOT USE COOKING RECEPTACLES THAT EXT ...

  • Smeg PGF95F-1 - page 4

    Instructions for the installer 2 POSITIONING OF THE HOB The following operation requires buildi ng and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminat ed wood, as long as they are heat- resistant (T 90°C). 2.1 Attachment to ...

  • Smeg PGF95F-1 - page 5

    Instructions for the installer 2) 3) 4) 23 ...

  • Smeg PGF95F-1 - page 6

    Instructions for the installer 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in the figure in the work surface, observing a minimum distance of 50 mm from the rear edge. The lower part of the protective cover must be fully accessible when the appliance is installed. This appliance can be insta ...

  • Smeg PGF95F-1 - page 7

    Instructions for the installer Overall dimensions: location of gas and electrical connection points (all measures in mm). Caution: surface temperature underneath may exceed 125 degrees C. To avoid a hazard, under-bench access must be restricted. Refer to installation instruction IMPORTANT: when installing the app liance above a cupboard, a dividing ...

  • Smeg PGF95F-1 - page 8

    Instructions for the installer 2.3 Electrical connection Make sure that the voltage and capacit y of the power supply cable conform to the data shown on the plate loca ted under the protective cover. Do not remove this plat e for any reason . The power supply cable plug and the wa ll socket must be of the same type and conform to the current electr ...

  • Smeg PGF95F-1 - page 9

    Instructions for the installer 2.4 Ventilation requirements The appliance may be installed only in rooms with permanent ventilation, as required by UNI-CIG 7129 / 7131 st andards. The room in which the appliance is installed must have sufficient air flow to satisfy the requirements of normal gas combus tion and of necessary air exchange in the room ...

  • Smeg PGF95F-1 - page 10

    Instructions for the installer 2.6 Gas connection Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe conforming to the prov isions defined by UNI-CIG 7129. After connection operations, check for leaks using a soapy solution. The hob has been inspected for G20 natural gas (2H) at a pressure of 20 mbar. For use w ...

  • Smeg PGF95F-1 - page 11

    Instructions for the installer 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, unplug th e appliance from the mains. The hob is set for natural gas G20 (2H) at a pressure of 20 mbar. In the case of functioning with other types of gas the burner nozzles must be changed and the minimum flame adjust ed on the ...

  • Smeg PGF95F-1 - page 12

    Instructions for the installer 3.2 Burner and nozzle characteristics table Burner Rated heating capacity (kW) LPG – G30/G31 30/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flow rate (W) Flow rate g/h G30 Flow rate g/h G31 Auxiliary (1) 1.05 50 27 (*) 28 (**) 350 76 75 Semi rapid (2) 1.8 65 33 (*) 32 (**) 450 130 128 Rapid (3) 2.3 75 ...

  • Smeg PGF95F-1 - page 13

    Instructions for the installer 4 FINAL OPERA TIONS After carrying out the above adjustments, remount in reverse order to the instructions given in paragraph “3.1 Replacement of nozzles on the hob”. After adjustment to a different kind of gas from the one for which the appliance has been tested, replace the plate inside the storage compartment w ...

  • Smeg PGF95F-1 - page 14

    Instructions for the user 5 USING THE HOB 5.1 Ignition of the burners Before turning on the burners, make sure that the flame-spreader crowns and respective caps are proper ly fitted in their housings. Ensure the flame-spreader holes A are aligned with the ignition plugs and the thermocouples. Panstand grid B , available upon request, is intended f ...

  • Smeg PGF95F-1 - page 15

    Instructions for the user 5.2 Practical advice for using the burners For better use of the burners and lowe r gas consumption, use covered cooking receptacles that have a flat, smooth bottom and are proportional in size to the burner to prevent the flame from licking the sides (see paragraph “5.3 Diameter of receptac les”). When water reaches b ...

  • Smeg PGF95F-1 - page 16

    Instructions for the user 6 CLEANING AND MAINTENANCE Before any intervention, disconnect the appliance from the mains. 6.1 Cleaning the stainless steel To keep stainless steel in good c ondition it should be cleaned regularly after use. Let it cool first. 6.1.1 Routine daily cleaning To clean and preserve the stainl ess steel surfaces, always use o ...

Manufacturer Smeg Category Cooktop

Documents that we receive from a manufacturer of a Smeg PGF95F-1 can be divided into several groups. They are, among others:
- Smeg technical drawings
- PGF95F-1 manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg PGF95F-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg PGF95F-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg PGF95F-1, service manual, brief instructions and user manuals Smeg PGF95F-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg PGF95F-1.

Similar manuals

A complete manual for the device Smeg PGF95F-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg PGF95F-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg PGF95F-1.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg PGF95F-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg PGF95F-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg PGF95F-1, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg PGF95F-1 - which should help us in our first steps of using Smeg PGF95F-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg PGF95F-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg PGF95F-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg PGF95F-1?

Use the form below

If you did not solve your problem by using a manual Smeg PGF95F-1, ask a question using the form below. If a user had a similar problem with Smeg PGF95F-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)