English dropdown-ico

Manual Vulcan-Hart VMX

32 pages 1.5 mb
Download

Go to site of 32

Summary
  • Vulcan-Hart VMX - page 1

    ELECTRIC HEAVY DUTY RANGES MODELS VR, VS, VM, VEX, VMX AND VRC INSTALLATION & OPERATION MANUAL F33210 (Rev. A 1-04) www.vulcanhart.com VR4 Range VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC P.O. BOX 696, LOUISVILLE, KY 40201-0696 TEL. (502) 778-2791 For additional information on Vulcan-Hart or to locate an authorized parts and service ...

  • Vulcan-Hart VMX - page 2

    2 The following models have been discontinued and are no longer available: VR1(C) VS1 VM1 through VM7 VEX1 VR3(C) VS3 VMX1 VR6(C) VS6 VMX2 VR7(C) VS7 VMX3 ...

  • Vulcan-Hart VMX - page 3

    3 INSTALLATION AND OPERATION MANUAL FOR ELECTRIC RANGES MODELS VR, VS, VM, VEX, VMX AND VRC INDEX SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Vulcan ranges are produced with quality workmanship and material. Proper installation, usage and maintenance of your range will result in many years of satisfactory performance. The manufacturer suggests tha ...

  • Vulcan-Hart VMX - page 4

    4 VR1, VR2 VR SERIES VM1, VM2 VS1, VS2 VR3, VR6 VM3, VM6 VS3, VS6 VR5 VM5 VS5 VR4 VM4 VS4 VR3, VR6 VM3, VM6 VS3, VS6 (SHOWN WITH OPTIONAL HIGH SPEED ELEMENTS) VR7 VS7 VM7 VRC SERIES VS SERIES VULCAN RANGE CONFIGURATIONS VR1C, VR2C VR3C, VR6C VR5C VR4C VR3C, VR6C VR7C PL - 51130-1 ...

  • Vulcan-Hart VMX - page 5

    5 VEX1 VMX1 VMX3 VEX3 VMX2 VEX2 VM1 VM2 VULCAN RANGE CONFIGURATIONS PL - 51130-2 ...

  • Vulcan-Hart VMX - page 6

    6 The various Vulcan electric VR, VS, VM, VEX and VMX Family Series standard ranges and VRC Series convection ranges are equipped as follows: MODEL DESCRIPTION RANGES WITH STANDARD OVEN VR1 (3) 12" x 24" (305 x 610) hot tops. VR2 (3) 12" x 24" (305 x 610) all purpose plates, (2) with grease troughs on right and left sides and (1 ...

  • Vulcan-Hart VMX - page 7

    7 MODEL DESCRIPTION RANGES WITH CABINET BODY VS1 (3) 12" x 24" (305 x 610) hot tops. VS2 (3) 12" x 24" (305 x 610) all purpose plates, (2) with grease troughs on right and left sides and (1) without grease trough in the center. VS3 (2) 9 1 / 2 " (241) dia. round French hot plates at left and (2) 12" x 24" (305 x 6 ...

  • Vulcan-Hart VMX - page 8

    8 PL-40033-1 Bumper Bar Mounting Location Bumper Bar Mounting Location BUMPER BAR INSTALLATION (RANGES ON CASTERS ONLY) There are 2 sets of bumper bars packaged separately and placed inside the oven compartment for shipping. Bumper bars must be installed on the side(s) of the convection oven that is placed near a combustible wall during operation. ...

  • Vulcan-Hart VMX - page 9

    9 ELECTRICAL DATA CHARTS VR RANGES WITH STANDARD OVENS OR VS RANGES WITH CABINET BODY "N/A" RANGES NOT AVAILABLE 480 VOLT 3 PHASE LOAD NOMINAL AMPS PER LINE WIRE TOTAL KW PER PHASE 3 PHASE 1 PHASE KW 208V 240V 480V 208V 240V 480V 208V 240V 480V MODEL CONN. X-Y Y-Z X-Z X Y Z X Y Z X Y Z XYZ XYZ XYZ VR1,2,5 21.7 7.7 5 9 70 53 58 6 0 46 51 3 ...

  • Vulcan-Hart VMX - page 10

    10 220/380, 240/415 VOLT VS/VM RANGES AND VR RANGES WITH OVEN 3 PHASE LOAD NOMINAL AMPS PER LINE WIRE TOTAL KW PER PHASE 240/415 VOLT KW 3 PHASE 1 PHASE MODEL CONN. X-N Y-N Z-N X Y Z X Z VR1,2,5 21.7 7.7 5 9 32 21 38 32 58 VR1,2,5 / VB73 27.7 10.7 8 9 45 33 38 45 71 VS,VM1,2,5 15 5 5 5 21 21 21 21 42 VS,VM1,2,5 / VB73 21 8 8 5 33 33 21 33 54 VR3,6, ...

  • Vulcan-Hart VMX - page 11

    11 OPERATION WARNING: THE RANGE AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, SERVICING AND CLEANING THE RANGE. WARNING (CONVECTION OVEN MODELS ONLY): WHEN USING CONVECTION OVENS, DO NOT STAND DIRECTLY IN FRONT OF OVEN WHILE OPENING DOOR. ALTHOUGH OPENING OVEN DOOR WILL AUTOMATICALLY SHUT OFF THE FAN, SOME HEAT ESCAPES. STEP AWAY TO AVOID HOT AIR ...

  • Vulcan-Hart VMX - page 12

    12 Oven Controls Thermostat — (located on the right side of the switch panel) controls and maintains oven temperature around the desired set temperature. Temperature range of the oven is from 175°F to 550°F (79-288). VRC Oven ON-OFF Switch (Convection Oven) — a rocker-type switch that works in conjunction with the electric supply of the therm ...

  • Vulcan-Hart VMX - page 13

    13 High-Speed Units High-speed units furnished on 208 and 240 volt models are controlled by infinite switches. Optional French Hot Plate French hot plates are furnished in lieu of high-speed units. Designed for bulk cooking and stock pot work (up to 20 Qt. stock pots or 9-10" [229-254] dia. pans). Stock pots of over 5-gallon capacity are not r ...

  • Vulcan-Hart VMX - page 14

    14 To operate the convection oven, arrange oven racks as required, turn the power switch to ON and set the thermostat dial to the desired temperature setting. Allow the oven indicator light to cycle on and off at least twice to ensure that the oven has reached the preset cooking temperature. Load product as quickly as possible. Place pans on center ...

  • Vulcan-Hart VMX - page 15

    15 CLEANING WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING. Daily (Or As Necessary) 1. Empty and clean grease drains and troughs. Do not line trays or trough with heat reflecting foil. 2. While still warm, wipe surface tops with a cloth or other grease absorbing material (or scrape if necessary) to remove spillover, grease, etc., befor ...

  • Vulcan-Hart VMX - page 16

    16 This page intentionally left blank ...

  • Vulcan-Hart VMX - page 17

    Cette page a été intentionnellement laissée en blanc 16 ...

  • Vulcan-Hart VMX - page 18

    NETTOYAGE AVERTISSEMENT : COUPER L’ALIMENTATION ÉLECTRIQUE AVANT DE PROCÉDER AU NETTOYAGE. Nettoyage quotidien (ou au besoin) 1. Nettoyer et vider les plateaux et les godets à graisse à tous les jours. Ne pas recouvrir de papier d’aluminium réfléchissant la chaleur. 2. Pendant qu’elles sont encore chaudes, essuyer (ou racler au besoin) ...

  • Vulcan-Hart VMX - page 19

    Positionner les clayettes selon les besoins, mettre l’interrupteur général à «ON» (MARCHE) et régler le thermostat à la température désirée. Laisser le voyant s’allumer et s’éteindre au moins deux fois pour s’assurer que le four a atteint la température de cuisson désirée. Charger les aliments aussi rapidement que possible. D? ...

  • Vulcan-Hart VMX - page 20

    Éléments à chauffe rapide Les éléments à chauffe rapide utilisés avec les modèles fonctionnant à 208 et 240 V sont commandés par des commutateurs à réglage continu. Plaque circulaire en option Les plaques circulaires en remplacement des éléments chauffants à chauffe rapide conviennent à la cuisson en vrac d’aliments et l’utilisa ...

  • Vulcan-Hart VMX - page 21

    Commandes du four Thermostat – (Situé du côté droit du tableau de commande) Commande et maintient le four à la température désirée. La gamme de température du four varie de 79 à 288 °C (175 à 550 °C). Interrupteur «ON-OFF» (MARCHE-ARRÊT) du four VRC (four à air pulsé) – Interrupteur à berceau fonctionnant conjointement avec l? ...

  • Vulcan-Hart VMX - page 22

    FONCTIONNEMENT AVERTISSEMENT : LA CUISINIÈRE ET SES COMPOSANTS SONT CHAUDS. EXERCER UNE EXTRÊME PRUDENCE LORS DE SON UTILISATION, ENTRETIEN ET NETTOYAGE. AVERTISSEMENT (FOUR À AIR PULSÉ SEULEMENT) : NE PAS SE TENIR DEVANT LE FOUR À L’OUVERTURE DE LA PORTE. MÊME SI LE VENTILATEUR SE MET AUTOMATIQUEMENT EN MARCHE À L’OUVERTURE DE CELLE-CI, ...

  • Vulcan-Hart VMX - page 23

    CUISINIÈRES VS, VM ET VR À FOUR 220-380 ET 240-415 V TRIPHASÉ INTENSITÉ NOMINALE PAR FIL DE LIGNE (A) PUIS. KW PAR PHASE 240-415 V TOT. TRIPHASÉ MONOPHASÉ MODÈLE KW X-N Y-N Z-N X Y Z X Z VR1,2,5 21,7 7,7 5 9 32 21 38 32 58 VR1,2,5 / VB73 27,7 10,7 8 9 45 33 38 45 71 VS,VM1,2,5 15 5 5 5 21 21 21 21 42 VS,VM1,2,5 / VB73 21 8 8 5 33 33 21 33 54 ...

  • Vulcan-Hart VMX - page 24

    TABLEAU DES CARACTÉRISTIQUES ÉLECTRIQUES CUISINIÈRES VR À FOUR CONVENTIONNEL ET CUISINIÈRES VS AUTOPORTANTES N/O = CUISINIÈRES 480 V NON OFFERTES TRIPHASÉ INTENSITÉ NOMINALE PAR FIL DE LIGNE (A) PUIS. KW PAR PHASE TRIPHASÉ MONOPHASÉ TOT. 208 V 240 V 480 V 208 V 240 V 480 V 208 V 240 V 480 V MODÈLE KW X-Y Y-Z X-Z X Y Z X Y Z X Y Z XYZ XYZ ...

  • Vulcan-Hart VMX - page 25

    Emplacement des trous de fixation de la barre de choc Emplacement des trous de fixation de la barre de choc INSTALLATION DES BARRES DE CHOC (CUISINIÈRES SUR ROULETTES SEULEMENT) Deux paires de barres de choc emballées séparément sont expédiées dans l’enceinte du four. Poser ces barres du ou des côtés du four à air pulsé qui se trouvent ...

  • Vulcan-Hart VMX - page 26

    MODÈLE DESCRIPTION CUISINIÈRES AUTOPORTANTES VS1 Trois plaques à bouillir de 305 x 610 mm (12 x 24 po). VS2 Trois plaques tout usage de 305 x 610 mm (12 x 24 po); les plaques de droite et de gauche sont pourvues d’une rainure de récupération de la graisse, mais non celle du centre. VS3 Deux plaques circulaires de 241 mm (9 1/2 po) de diam. ? ...

  • Vulcan-Hart VMX - page 27

    Les cuisinières électriques Vulcan à four conventionnel des séries VR, VS, VM, VEX et VMX et à four à air pulsé de la série VRC offrent les caractéristiques suivantes : MODÈLE DESCRIPTION CUISINIÈRES À FOUR CONVENTIONNEL VR1 Trois plaques à bouillir de 305 x 610 mm (12 x 24 po). VR2 Trois plaques tout usage de 305 x 610 mm (12 x 24 po) ...

  • Vulcan-Hart VMX - page 28

    VEX1 VMX1 VMX3 VEX3 VMX2 VEX2 VM1 VM2 VULCAN RANGE CONFIGURATIONS CONFIGURATIONS DES CUISINIÈRES VULCAN 5 ...

  • Vulcan-Hart VMX - page 29

    VR1, VR2 VR SERIES VM1, VM2 VS1, VS2 VR3, VR6 VM3, VM6 VS3, VS6 VR5 VM5 VS5 VR4 VM4 VS4 VR3, VR6 VM3, VM6 VS3, VS6 (SHOWN WITH OPTIONAL HIGH SPEED ELEMENTS) VR7 VS7 VM7 VRC SERIES VS SERIES VR1C, VR2C VR3C, VR6C VR5C VR4C VR3C, VR6C VR7C PL - 51130-1 (ÉLÉMENTS À CHAUFFE RAPIDE EN OPTION) CONFIGURATIONS DES CUISINIÈRES VULCAN SÉRIE VR SÉRIE VR ...

  • Vulcan-Hart VMX - page 30

    Installation et fonctionnement CUISINIÈRES ÉLECTRIQUES À SERVICE INTENSE MODÈLES VR, VS, VM, VEX, VMX ET VRC DOCUMENT À CONSERVER EN CAS DE BESOIN. Les appareils Vulcan sont fabriqués avec le plus grand soin et à partir des meilleurs matériaux. Leur installation, utilisation et entretien appropriés permettront d’en obtenir un rendement o ...

  • Vulcan-Hart VMX - page 31

    Leur fabrication ayant cessé, les modèles suivants ne sont plus offerts : VR1(C) VS1 VM1 à VM7 VEX1 VR3(C) VS3 VMX1 VR6(C) VS6 VMX2 VR7(C) VS7 VMX3 2 ...

  • Vulcan-Hart VMX - page 32

    CUISINIÈRE ÉLECTRIQUE À SERVICE INTENSE MODÈLES VR, VS, VM, VEX, VMX ET VRC MODE D'EMPLOI F33210 (Rév. A 1-04 ) www.vulcanhart.com Cuisinière électrique VR4 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC P.O. BOX 696, LOUISVILLE, KY 40201-0696 TÉL. (502) 778-2791 ...

Manufacturer Vulcan-Hart Category Range

Documents that we receive from a manufacturer of a Vulcan-Hart VMX can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- VMX manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart VMX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart VMX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart VMX, service manual, brief instructions and user manuals Vulcan-Hart VMX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart VMX.

Similar manuals

A complete manual for the device Vulcan-Hart VMX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart VMX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart VMX.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart VMX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart VMX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart VMX, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart VMX - which should help us in our first steps of using Vulcan-Hart VMX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart VMX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart VMX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart VMX?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart VMX, ask a question using the form below. If a user had a similar problem with Vulcan-Hart VMX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)