-
IBM CI5VGM Series - page 1
CI5VGM Series Full-Size Pentium All-in-one CPU Card Version 1.0A Industrial CPU Card PC-Based Computer Boards for Industrial Automation User’s Manu al ...
-
IBM CI5VGM Series - page 2
ii CI5VGM User’s Manual Copy right Notice This publication is protected by copy rig h t an d all rig h ts are res erv ed. No part of it m ay be reproduced or transmitted by an y m eans or in an y form , with out prior consent of the original m anuf acturer. The inform ation in this documen t has been caref ully checked and is believed to be accur ...
-
IBM CI5VGM Series - page 3
Contents CI5VGM User’s Manual iii Contents Chapter 1 Introduction............................................. 1 Checklist ..................................................................... 3 Description ................................................................. 3 Features ................................................................ ...
-
IBM CI5VGM Series - page 4
...
-
IBM CI5VGM Series - page 5
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 1 Below are addi ti onal i nf ormat ion f or LCD Panel Type Select and settings f or newer CP Us SW3: LCD Panel Ty pe Select 1 2 3 4 TFT LCD Panel ON ON O N ON 640x480 –18 OFF O N ON ON 800x600 –18 ON OFF ON ON 1024x 768 –18 OFF OF F ON ON 1024x768 –18+18 ON ON OFF ON 1280x 1024 –18+18 1 2 ...
-
IBM CI5VGM Series - page 6
Chapter 1 I ntroduction 2 CI5VG M User ’s Manual 1 Introduction This manual is designed to give y ou information on th e CI5VGM CPU card. It is divided into the following sections: Checklis t ....................................................................................... 3 Description....................................................... ...
-
IBM CI5VGM Series - page 7
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 3 Check list Please check that y our package is com plete and contains the item s below . If y o u discover damag ed or missin g item s, please cont act your dealer. • • • • T he CI 5VGM Industr ia l CPU Card • • • • This User’s Manual • • • • 1 IDE Ribbon C able • • ? ...
-
IBM CI5VGM Series - page 8
Chapter 1 I ntroduction 4 CI5VG M User ’s Manual Features • • • • Socket 7, CPU Speed 90~550MHz • • • • Bus Speed 60/ 66/75/83/95/100MHz • • • • VI A MV P 3 AG P se t • • • • Up to 384MB of sy stem m emory , ECC fun ction supporte d • • • • Trident 9520/25 A GP VGA chipset for LC D & CRT display • • ...
-
IBM CI5VGM Series - page 9
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 5 • • • • Memory Sockets : Three 168-pin D IMM sockets Memory types: SDR AM (Sy nchronous DR AM) DI MMs: EDO DRAM or SDRA M (Synch ronous DRAM) DI MM Si ze : 8MB, 16MB, 32MB, 64MB, 128MB • • • • BIOS : Y2K compl iant Aw ard BIOS, PnP su pport • • • • FLA SH EEPROM (256K B) fo ...
-
IBM CI5VGM Series - page 10
Chapter 1 I ntroduction 6 CI5VG M User ’s Manual • • • • Onboa rd Audio (o pt ional): T he onboard audi o consis ts of a YAMA HA YMF715-S (OPL3- SA3) s ingl e audio chi p that integrates OPL3 and its DAC, 16bit Sigma- delta CODEC, MPU401 MIDI interface, joystick with tim er, and a 3D enhanced controller including all th e analog component ...
-
IBM CI5VGM Series - page 11
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 7 Intelligence • • • • Temp erature Mo nitoring and Alert : A sensor for the CPU temperature on the CI5VGM monitors th e CPU temperature an d alerts the user through the sp eaker or b uzzer when temperature exceeds the s afe heat level. • • • • Windows 95 shut-off: A llo ws shut-off ...
-
IBM CI5VGM Series - page 12
Chapter 1 I ntroduction 8 CI5VG M User ’s Manual Board Dimensions ...
-
IBM CI5VGM Series - page 13
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 9 This page is intentionally left blank . ...
-
IBM CI5VGM Series - page 14
Chapter 2 I nstallations 10 CI5VGM U ser’ s Manual 2 Installations This chapter provides inform ation on how to use the jumpers an d connectors on the C I5VGM in order to set up a w orkable syst em. The topics covered are: CPU Installation.......................................................................... 11 Memory Installation ........... ...
-
IBM CI5VGM Series - page 15
Chapter 2 I nstallations CI5VGM U ser’ s Manual 11 CPU Inst all atio n The CI5VGM Indu strial CPU Ca rd support s a ZIF proces sor socket f or Pentium- level processors. Unlike PGA sockets , ZIF (Z ero Insertion Force) s ockets come w ith a lever to secure the processor. Make su re the notch on the corner of the CPU correspo nds with the n otch o ...
-
IBM CI5VGM Series - page 16
Chapter 2 I nstallations 12 CI5VGM U ser’ s Manual Mem ory Installation The CI5VGM In dustrial CPU Card su pports three 168- pin DIMM sockets for a m axim um tota l me mory of 384MB. The mem ory modu les can com e in s izes of 16MB, 32MB, 64MB, 128MB i n EDO DR AM or SDRAM ty pe. In populat ing th e DIMM sockets, DIMM1, DIMM2 or DIMM3 can be popu ...
-
IBM CI5VGM Series - page 17
Chapter 2 I nstallations CI5VGM U ser’ s Manual 13 168Pin DIMM (3.3V) - SDRAM or EDO DRAM (continued) (DIMM 3 ) (DIMM 2 ) (DIMM1) Total M emory 16MB 16MB 16MB 48MB 32MB 16MB 16MB 64MB 64MB 16MB 16MB 96MB 128MB 16MB 16MB 160MB 32 MB 32M B ----- 64 MB 64 MB 32M B ----- 96 MB 128MB 32MB ----- 160MB 32MB 32MB 8MB 72MB 64MB 32MB 8MB 104MB 128MB 32MB 8 ...
-
IBM CI5VGM Series - page 18
Chapter 2 I nstallations 14 CI5VGM U ser’ s Manual Jumpers on the C I5VGM The jumpers on the CI5VGM allow s you to conf igure y our CPU card according to th e needs of y our applications . If y ou hav e doubts about the best jum p er configuration f or your n eeds, contact y our dealer or sales representative. T he follow ing table lists the con ...
-
IBM CI5VGM Series - page 19
Chapter 2 I nstallations CI5VGM U ser’ s Manual 15 Jumper Locations on the CI5VGM ...
-
IBM CI5VGM Series - page 20
Chapter 2 I nstallations 16 CI5VGM U ser’ s Manual SW1(1-8): CPU Frequency Selector For Intel Pentium , IDT WinChip 2- 3D / C6 SW1 CPU Cloc k AGP Cloc k M ultiplier CPU FREQ. o n o n o n o ff o ff o ff o ff o n 60MHz 60MHz 1.5x P54C-90 o ff o n o n o ff o ff o ff o ff o n 66MHz 66MH z 1.5x P54C-100 on on on of f on off of f on 60MHz 60MHz 2x P54C ...
-
IBM CI5VGM Series - page 21
Chapter 2 I nstallations CI5VGM U ser’ s Manual 17 For Cyrix 6x86, 6x86L, 6x86MX. MII CPU SW1 CPU Clock AGP Clock Multiplier CPU FREQ. o ff o n o n o ff o n o ff off o n 66MHz 66MHz 2x P166+ (133MHz) o ff o ff o n o ff on o ff o ff o n 75MHz 75MHz 2x P200+ (150MHz) of f on on of f on on of f on 66MHz 66MHz 2.5x PR200 (166MHz) o ff o n o n o ff o ...
-
IBM CI5VGM Series - page 22
Chapter 2 I nstallations 18 CI5VGM U ser’ s Manual For AMD K5, K6, K6 -2 CPU SW1 CPU Cloc k AGP Cloc k M ultiplier CPU FREQ. on on on off off off of f on 60MHz 60MHz 1.5x PR90 off on o n off off off off o n 66MHz 66MHz 1.5x PR100 off on on off on off of f on 66MHz 66MHz 2x PR133 off on on off on on off on 66MHz 66MHz 2.5x PR166 / K6-166 off on on ...
-
IBM CI5VGM Series - page 23
Chapter 2 I nstallations CI5VGM U ser’ s Manual 19 off off off on on of f on off 100MHz 66MHz 4x K6-2/400 off off off on on on on off 100MHz 66MHz 4.5x K6-2/450 JP2: SDRAM Operating Frequency JP2 SDRAM Frequency pin 1-2 short Run CPU Clock pin 2-3 short Run AGP Clock NOTE : Set the SDRAM Fr equency to Run CPU Clock only when the CPU clock is 100M ...
-
IBM CI5VGM Series - page 24
Chapter 2 I nstallations 20 CI5VGM U ser’ s Manual For Dual Voltage CPU: Intel P55C, Cy rix 6x86L/ MX/MII, A MD K6/K6- 2, IDT WinC hip 2-3D SW2 V IO V CORE CPU o ff o ff o n o n 3.3V 3.2V K6-233 (0.35 µ ) on on off on 3.3V 3.1V o ff o n o ff o n 3.3V 3.0V o n o ff o ff o n 3.3V 2.9V K6-166/ 200 6x86MX o ff o ff o ff o n 3.3V 2.8V WinChip 2- 3D ( ...
-
IBM CI5VGM Series - page 25
Chapter 2 I nstallations CI5VGM U ser’ s Manual 21 For Dual V oltage CPU: Intel P55C, Cy rix 6x86L/MX /MII , AMD K 6/K6-2 SW2 V IO V CORE CPU o ff o n o ff o ff 3.3V 2.2V K6, K6-2 (0.25 µ ) o n o ff o ff o ff 3.3V 2.1V o ff o ff o ff o ff 3.3V 2.0V JP3: LCD Power Setting The CI5VGM XGA interf ace supports 5V and 3.3V LCD dis plays. Us e JP3 to c ...
-
IBM CI5VGM Series - page 26
Chapter 2 I nstallations 22 CI5VGM U ser’ s Manual JP6: D iskOnChip BIOS Expansion Address Sele ct JP6 Address JP6 Address 1 2 3 D0000-D7FFF 1 2 3 D8000-DFFFF (default) J11: RS232/422/485 (COM2) Selection COM1 is fixe d for RS- 232 use only . COM2 is s electable for RS232, R S-422 an d RS-485. The following table describes the jumper settings of ...
-
IBM CI5VGM Series - page 27
Chapter 2 I nstallations CI5VGM U ser’ s Manual 23 J24: Clear CMOS Content J24 Setting Function 1 2 3 Pin 2- 3 Short/Closed Clear CMOS Content 1 2 3 Pin 1- 2 Short/Closed Normal Operation (default) W1: Powe r Supply Select W1 Function W1 Function short AT X P ower open AT P o wer Note : Failure to set W1 correctly m ay cause the system not to boo ...
-
IBM CI5VGM Series - page 28
Chapter 2 I nstallations 24 CI5VGM U ser’ s Manual Connectors on the CI5VGM The connectors on the CI5VGM allow s you to conn ect external devices such as key board, floppy disk driv es, hard dis k drives, print ers, etc. The followin g table lists the connectors on CI5VGM and their respective functio ns. Connector L o cations on the CI5VGM....... ...
-
IBM CI5VGM Series - page 29
Chapter 2 I nstallations CI5VGM U ser’ s Manual 25 Connector Locations on the CI5VGM ...
-
IBM CI5VGM Series - page 30
Chapter 2 I nstallations 26 CI5VGM U ser’ s Manual J1: Floppy Drive Connector J1 is a 34-pin h eader and w ill support up to 2.88MB floppy drives. Signal Nam e Pin # Pin # Sign al Nam e Groun d 1 2 RM/ LC Ground 3 4 No connect Ground 5 6 No connect Groun d 7 8 Index Groun d 9 10 Motor enable 0 Ground 11 12 Drive select 1 Ground 13 14 Drive select ...
-
IBM CI5VGM Series - page 31
Chapter 2 I nstallations CI5VGM U ser’ s Manual 27 IDE1, IDE2: EIDE Connectors IDE1: Prim ary IDE Connector Signal Nam e Pin # Pin # Sign al Nam e Reset IDE 1 2 Grou nd Host data 7 3 4 Host data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host dat a 11 Host data 3 11 12 Host dat a 12 Host data 2 13 14 Host dat a 13 ...
-
IBM CI5VGM Series - page 32
Chapter 2 I nstallations 28 CI5VGM U ser’ s Manual J3: External ATX Power Connector Pin # Signal Nam e 1 Du al fu nction pow er button 2 GND 3 Du al fu nction pow er button 4 GND 5 PS-ON (s oft on/of f) 6 5V SB (st andby +5V) J3 1 6 J18: AT Power Connector Pin # Signal Nam e 1 N/A 2 +5V 3 +12V 4 -12V 5 GND 6 GND J18 J4: Audio I/O Connector (optio ...
-
IBM CI5VGM Series - page 33
Chapter 2 I nstallations CI5VGM U ser’ s Manual 29 J4: Audio I/O Connector (Continued) The J 4 Audio I/O Connector connec ts to the EXT V GM Audio Da ughter C ard with the 26-pin ribbon cable supplied w ith the packag e. The EXTVG M Audio Daug hter car d provides two CD -AU DIO IN inte rnal connectors and exte rnal connecto rs for LINE OUT, LINE ...
-
IBM CI5VGM Series - page 34
Chapter 2 I nstallations 30 CI5VGM U ser’ s Manual J6: COM1 Serial Port Pin # Signal Nam e 1 DCD, Data carrier detect 2 RXD, Receive data 3 TXD, T ransmit data 4 DTR, Data terminal ready 5 GND, ground 6 DSR, Data set ready 7 RTS, Request to send 8 CTS, Cle ar to se nd J6 9 RI, Rin g indicator 10 NC J7: COM2 Serial Port J7, a 10- pin h eader conn ...
-
IBM CI5VGM Series - page 35
Chapter 2 I nstallations CI5VGM U ser’ s Manual 31 J8: Front Bezel Connector The front bezel of th e case has a con trol panel w hich provides ligh t indication of the comput er activities and switches to chang e the computer status. J8 is a 20- pin header that prov ides interfaces for the f o llowing functio ns. Hard Disk Drive LED Re set Switch ...
-
IBM CI5VGM Series - page 36
Chapter 2 I nstallations 32 CI5VGM U ser’ s Manual ATX Power O N Switch: P ins 7 and 17 This 2-pi n conn ector is an “A TX Power S upply On/Off Sw itch” on the sy stem th at connects to the pow er sw itch on the case. When pressed, the power sw itch will force th e system to p ower on. When pressed again, it will force th e system to power of ...
-
IBM CI5VGM Series - page 37
Chapter 2 I nstallations CI5VGM U ser’ s Manual 33 J9: LCD Panel Connector J9 is a dual-in- line header for flat panel L CD displays . T he follow ing show s the pin assig nm ents of th is connector. Signal Nam e Pin # Pin # Sign al Nam e +12V 1 2 +12V GND 3 4 GND +5V/3.3V 5 6 +5V/3.3V ENPVEE 7 8 GND P0 9 10 P1 58 57 P2 11 12 P3 P4 13 14 P5 P6 15 ...
-
IBM CI5VGM Series - page 38
Chapter 2 I nstallations 34 CI5VGM U ser’ s Manual J14: Chassis Fan Power Connector J14 is a 3-pin h eader for the chas sis f an. The fan m ust be a 12V fan . Pin # S ignal Nam e 1 Rotation 2 +12V 1 2 3 3 Groun d J22, J23: CPU Fan P ow er Connectors J22 and J23 are pin h eaders f or th e C PU fa n . The fa n m ust be a 12V fan . Pin # S ignal Nam ...
-
IBM CI5VGM Series - page 39
Chapter 2 I nstallations CI5VGM U ser’ s Manual 35 J17: External Mouse Connector Pin # Signal Nam e 1 Mouse data 2 Groun d 3 5V J17 4 Mouse Clock J19: PS/2 Keyboard Connector Pin # Signal Nam e 1 Key board data 2 N.C. 3 Groun d 4 5V 5 Key board clock J19 6 N.C. J20: PS/2 Mouse Connector Pin # Si gnal Nam e 1 Mouse data 2 N.C. 3 Groun d 4 5V 5 Mou ...
-
IBM CI5VGM Series - page 40
Chapter 2 I nstallations 36 CI5VGM U ser’ s Manual J21: VGA CRT Connector Signal Nam e Pin # Pin # Signal Nam e Red 1 2 Green Blue 3 4 N.C. GND 5 6 GND GND 7 8 GND N.C. 9 10 GND N.C. 11 12 N.C. HSYNC 13 14 VSYNC J21 NC 15 J25: RJ45 Connector This conn ector is f or the 10/100Mbps Ethern et capability of the CPU card The figu re below s how s the ...
-
IBM CI5VGM Series - page 41
Chapter 2 I nstallations CI5VGM U ser’ s Manual 37 Watchdog Timer Configuration The function of the w atchdog timer is to reset the system au tomatically and is def ined at I/O port 0443H. To enable t he w atchdog tim er and allow the s y stem to res et , w rite I/O port 0443H. To disable t h e ti m er, write I/ O port 0441H for th e sy stem to s ...
-
IBM CI5VGM Series - page 42
Chapter 3 BIOS Config ura tion 38 CI5VGM U ser’ s Manual This page was intentionally left blank. ...
-
IBM CI5VGM Series - page 43
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 39 3 BIOS Configuration This chapter describes the different settings av ailable in the Aw ard BIOS that comes w ith the CI5VGM CPU card. The topics covered in th is chapter are as follow s: BIOS Introduction.............................................................. 42 BIOS Setup ........ ...
-
IBM CI5VGM Series - page 44
Chapter 3 BIOS Config ura tion 40 CI5VGM U ser’ s Manual PCI/VGA Palette Snoop .......................................... 49 OS Select for DRA M > 64MB ................................ 49 HDD S.M.A.R.T. Capability ................................... 49 Video BIOS Shadow................................................ 50 C8000 - CBFFF Sh adow/D ...
-
IBM CI5VGM Series - page 45
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 41 Load BIOS Defau lts ........................................................... 59 Load Setup Def aults ........................................................... 59 Integrated Peripherals ........................................................ 60 OnChip IDE Firs t/Second Chan nel....... ...
-
IBM CI5VGM Series - page 46
Chapter 3 BIOS Config ura tion 42 CI5VGM U ser’ s Manual BIOS Introduction The Award BIOS (Basic Input/Output System ) installed in your compu ter sy stem’ s ROM su pports Intel Penti um II processors in a standard IBM-A T compatible I/O sy stem. The BIOS provides critical low -lev el su pport for stan dard devices such as disk dri ves, seri al ...
-
IBM CI5VGM Series - page 47
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 43 ROM PCI/ISA BIOS CMO S SETUP UTILITY AW A RD S OFTW ARE, I NC. STA NDARD CMOS SETUP INTEGRATED PERIPHERAL S BIOS FEATURES SETU P SUPERVISOR PASSWORD CHIPSET FEATUR ES SETUP USER PASSW ORD POW E R MA NA GEMENT S E TUP IDE HDD AUTO DE T E CTION PNP/P CI CONFIG URA TION HDD LOW LEVE L FORMAT ...
-
IBM CI5VGM Series - page 48
Chapter 3 BIOS Config ura tion 44 CI5VGM U ser’ s Manual Standard CM OS Setup “Stan dard CMOS Setup” choice allow s you to record som e basic hardw are configurations in you r computer s ys tem an d set the sy stem clock and error h andling. If the m otherboard is already installed in a workin g sy stem, you w ill not need to select this opti ...
-
IBM CI5VGM Series - page 49
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 45 Time The time form at is: Ho ur : 00 to 23 M inu te : 00 to 59 Second : 00 to 59 To set the tim e, high light th e “Tim e” field an d use the <PgUp>/ <PgDn > or +/- key s to set the current tim e. Prim ary HDDs / Seconda ry HDDs The onboard PCI IDE conn ectors provide Prim ...
-
IBM CI5VGM Series - page 50
Chapter 3 BIOS Config ura tion 46 CI5VGM U ser’ s Manual NOTE : The specification s of your drive must match with the d rive table. The h ard disk will no t work prope rly if you enter incorrect information in these fields. If your hard d isk drive type is not matched or l iste d, you can use Type U ser to define your own dr ive type manually . D ...
-
IBM CI5VGM Series - page 51
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 47 BIOS Feat ures Set up This section allow s you to configure and im prove y our system and allows you to set up som e sy stem features accordin g to y our preference. ROM / PCI ISA BIOS BIOS FEAT URES SETUP AW ARD SOFT W ARE, INC. Virus W arning : Disabled Video BIOS Shadow : Enabled CPU In ...
-
IBM CI5VGM Series - page 52
Chapter 3 BIOS Config ura tion 48 CI5VGM U ser’ s Manual Quick Power On Self Test When enabled, th is f i eld speeds u p th e Pow er On Self Test (POST) after the system is turned on. If it is set to Enabled , BIOS w ill skip some item s. Boot Sequence This field determ ines the drive that the system searches firs t for an operating sy stem. The ...
-
IBM CI5VGM Series - page 53
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 49 Typem atic Rate Setting When disabled, continually hold ing down a key on your key board will generate only one instance. When enabled, you can set the tw o ty pematic controls listed next. By default, th is field is set to Dis abled. Typem atic Rate (Chars/Sec) When the typem atic rate is ...
-
IBM CI5VGM Series - page 54
Chapter 3 BIOS Config ura tion 50 CI5VGM U ser’ s Manual Video BIOS Shado w This item allow s you to chan ge the Video BIOS location from ROM to RAM. Video Shadow w ill increase the video speed. C8000 - CBFFF Shadow/DC000 - DFFFF Shad ow Shadow ing a ROM reduces the mem ory availabl e betw een 640KB to 1024KB. These fields determ ine wheth er or ...
-
IBM CI5VGM Series - page 55
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 51 Chipset F eatures Setup This Setup menu controls the configu ration of the moth erboard chipset. ROM PCI/ISA BIOS CHIPSET FEAT URES SETUP AW ARD SOFT W ARE I NC. Bank 0/1 DRAM Timing : SDRAM 8ns CPU W arning Temperature : 66 ° C/151 ° F Bank 2/3 DRAM Timing : SDRAM 8ns Current System Tem ...
-
IBM CI5VGM Series - page 56
Chapter 3 BIOS Config ura tion 52 CI5VGM U ser’ s Manual Video BIOS Cacheable When en abled, access to video BIOS addressed at C0000H to C7FFFH is cached, provided th at the cache controller is disabled. System BIOS Cacheable When enabled, access to the system BIOS ROM addressed at F0000H-FFFFFH is cached, prov ided that the cache controller is d ...
-
IBM CI5VGM Series - page 57
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 53 USB Keybo ard Support The field en ables or dis ables th e support f or a USB key board. CPU Warning Tem perature This field sets th e threshold tem perature at which an alert is sounded through t he system’s speaker . The CPU t e mperat ur e i s monito red b y t he onboard therm al sens ...
-
IBM CI5VGM Series - page 58
Chapter 3 BIOS Config ura tion 54 CI5VGM U ser’ s Manual Powe r Manage ment Setup The Power Mana gement Setup a llows you to sa ve ene rgy of your system effectively . It w ill shut down the hard disk an d turn off video display after a period of inactivity. ROM PCI/ISA BIOS POW ER MANAGEMENT SETUP AW ARD SOF T W ARE, INC. ACPI function : Enabled ...
-
IBM CI5VGM Series - page 59
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 55 PM Co ntrol by APM Thi s field all ows you to use t he Advanc ed P ower Manage ment devi ce to enhan ce the Max. Pow er Savin g mode and stop th e CP U’s internal clock . If the Max. Power Sav ing is n ot enabled, this w ill be preset to NO. Video Off Option The Video Off options are Sus ...
-
IBM CI5VGM Series - page 60
Chapter 3 BIOS Config ura tion 56 CI5VGM U ser’ s Manual Suspend Mo de When enabled, and after th e set time of sy stem inactivity , all d evices except the CPU will be shut of f. PM Events The VGA, LPT & COM, HDD & FDD, DMA/m aster, P WR-ON by Modem/L AN, RTC Alarm Resume, an d Primary INTR sections are I/O events w hich can prev ent th ...
-
IBM CI5VGM Series - page 61
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 57 PNP/ PCI C on f ig ur ati o n This o ption co nfigures the PCI b u s system. All PCI bus systems on the system use INT# , thus all installed PCI cards must be set to this value. ROM PCI/ISA BIOS PNP/PCI CONFIGURATION AW ARD SOFT W ARE I NC. PNP OS Installed : No CPU to PCI W rite Buffer : ...
-
IBM CI5VGM Series - page 62
Chapter 3 BIOS Config ura tion 58 CI5VGM U ser’ s Manual CPU to PCI Write Buffer When enabled, th is option increas es the eff iciency of the PCI bus to and speed up the execution in the processor. By default, this field is set to Enabled . PCI Dynam ic Bursting When enabled, th is option com bines several PCI cycles into one. By default, this fi ...
-
IBM CI5VGM Series - page 63
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 59 Load BIOS Defaults This optio n allows y ou to lo ad the troubleshooting defau lt values perman ently stored in the BIOS ROM. These default setting s are non-optim al and disable all high -performan ce features. ROM PCI/ISA BIOS CMO S SETUP UTILITY AW A RD S OFTW ARE, I NC. STANDARD CMOS S ...
-
IBM CI5VGM Series - page 64
Chapter 3 BIOS Config ura tion 60 CI5VGM U ser’ s Manual Integrated Peripheral s Thi s o pti o n sets your hard disk c onfigur atio n, mode and p or t. ROM PCI/ISA BIOS INTEGRAT ED PERIPHERALSP AW ARD SOFT W ARE I NC. OnChip IDE First Channel : Enabled Onboard FDD Controller : Enabled OnChip IDE Second Channel : Enabled Onboard Serial Port 1 : 3F ...
-
IBM CI5VGM Series - page 65
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 61 IDE Prim ary/Secondary Master/Slave UDM A The se fiel ds all ow your system to impro ve di sk I/O thro ughput to 33Mb/sec w ith the Ultra DMA/33 featu re. The options are Auto and Disabled . Init AGP Display First This field allows the sy stem to initialize first the VGA card in the AGP sl ...
-
IBM CI5VGM Series - page 66
Chapter 3 BIOS Config ura tion 62 CI5VGM U ser’ s Manual Supervis or / User Password These tw o options set t he sy stem pass word. Superv isor Pass word s ets a password that will b e u sed to pro tect th e system and Setup utility. User Password sets a password that w ill be used exclusiv ely on th e system . To specify a password, hi ghligh t ...
-
IBM CI5VGM Series - page 67
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 63 IDE HDD Auto Detection This option detects th e paramet ers of an IDE hard di sk drive, an d automatically enters them into the Stan d ard CMOS Setup screen. ROM PCI/ISA BIOS STANDARD CMOS SETUP AW ARD SOFT W ARE, INC. HARD DISKS TYPE SIZ E CYLS HEAD PRECOMP LANDZ SECTOR MODE Primary Maste ...
-
IBM CI5VGM Series - page 68
Chapter 3 BIOS Config ura tion 64 CI5VGM U ser’ s Manual Save & Exit Se tup This option allows you to determ ine wh ether or not to accept the modifications. If y ou ty pe “Y”, y ou w ill quit the setup utility and save all changes in to the CMOS mem o ry. If you ty pe “N”, you w ill return to Setup utility. ROM PCI/ISA BIOS CMO S SET ...
-
IBM CI5VGM Series - page 69
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 65 4 Audio Driver Installation Guide This chapter describes the audio driver installation proced ure for the onboard YA MAHA YMF715-S audio ch ip. T he YMF715- S (OPL3- SA3) s ingl e audio chi p integ rates OPL3 an d its DA C, 16bit Sigm a-delta CODEC, MPU401 MIDI interface, joys t ...
-
IBM CI5VGM Series - page 70
Chapter 4 Audio D river Installation Guide 66 CI5VGM U ser’ s Manual Installing the Audio Drivers for Windows 95 Step 1. After i nstal ling Window s 95, insert t he CD or au dio drivers floppy disk that comes w ith y our moth erboard in the CD-R OM or floppy disk drive (labeled YA MAHA Audio YMF715 Wi ndow s 95 Drivers ). Step 2. Click on Start ? ...
-
IBM CI5VGM Series - page 71
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 67 Step 3. W hen the f igure below appears , press the Next to search for the driver. Step 4. W hen the f igure below appears , click Other Locations …, then type d :soundya715w i n95 or a: and click OK . ...
-
IBM CI5VGM Series - page 72
Chapter 4 Audio D river Installation Guide 68 CI5VGM U ser’ s Manual Step 5. The Update Device Driver Wizard will fin d YAM AH A OPL3-SAx Sound System and show th e followin g figu re. Click Finish . Step 6. When the Opl3sa.drv on OPL3-SA x driver cou ld not be foun d , type the driver location as d:soundya715w in95 or a: as show n below. Cli ...
-
IBM CI5VGM Series - page 73
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 69 Step 7. W hen f ile copyin g is done an d the fig ure below appears, insert the Windows 95 CD into the CD-R OM, and then click OK . Step 8. When the driver installation is fin ished, continue to install the YSTATI ON so ftware. Pr ess Start → Run , then type d:SoundYA715W i ...
-
IBM CI5VGM Series - page 74
Chapter 4 Audio D river Installation Guide 70 CI5VGM U ser’ s Manual Step 9. W hen the f igure below appears , click Typic al , and then con tinue the installation by followin g Install Wizard. It is recomm e nded that the default settings assigned by th e Install Wizard be applied during the f irst time installation. ...
-
IBM CI5VGM Series - page 75
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 71 Setting the 3D Function Step 1. Click Start in the task bar, and then select Settings . Click C ontrol Panel . ...
-
IBM CI5VGM Series - page 76
Chapter 4 Audio D river Installation Guide 72 CI5VGM U ser’ s Manual Step 2. Double click the OPL3-SAx Conf ig icon. Step 3. Move Ymersion slide bar to adjust th e 3D effects . ...
-
IBM CI5VGM Series - page 77
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 73 Using YAMAHA So ftwa re Waveta ble for Windows 95 The audio driver inclu des the YAMA HA Soft GM softw are. After finishin g the audio d river installation, y o u can use th is software to change some setting s for better MIDI sound quality. Step 1. To switch to FM or Soft GM (S ...
-
IBM CI5VGM Series - page 78
Chapter 4 Audio D river Installation Guide 74 CI5VGM U ser’ s Manual Step 2. In the Control Panel w indow , double click th e Multimedia icon. ...
-
IBM CI5VGM Series - page 79
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 75 Step 3. W hen th e win dow below appears, choose th e MI DI tab. Three items are show n. These items are: • OPL3-SA FM Synthesizer Select OPL3 FM synthesize r . • OPL3-SA MPU401 Select Hardware Wavetable . • OPL3-S A SoftSynth Select Soft GM (S/W Wavetable). Dep e nding o ...
-
IBM CI5VGM Series - page 80
Chapter 4 Audio D river Installation Guide 76 CI5VGM U ser’ s Manual Installing the Audio Drivers for Windows NT 4.0 Step 1. Bef ore instal ling the audi o drivers f or Windows NT 4.0, you must f irst in stall the f ile pnpisa.inf . This file can be found in the Window s NT 4.0 CD or the Service Pack3 CD. It is recomm ended that the file in the S ...
-
IBM CI5VGM Series - page 81
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 77 5 VGA Driver Installation Guide This chapter describe the VGA driver installation procedure for the onboard Trident 9520/ 25. This chapter contains the follow ing sections: Instal ling Trident 9520/25 Drivers for Window s 95................... 78 Instal ling Trident 9520/25 Drivers ...
-
IBM CI5VGM Series - page 82
Chapter 5 VGA Driver Installation Guide 78 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows 95 Step 1. In the Wi ndow s 95 screen , click Start . Select Settings , then click the Control Panel icon. ...
-
IBM CI5VGM Series - page 83
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 79 Step 2. Double click Displ ay , then click Settings . ...
-
IBM CI5VGM Series - page 84
Chapter 5 VGA Driver Installation Guide 80 CI5VGM U ser’ s Manual Step 3. Click Advanced Properties , then click Change.... ...
-
IBM CI5VGM Series - page 85
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 81 Step 4. Click Have Disk ... . If "D:" is your CDR OM, type D:VGAT rid9520W IN95 and click OK . If you ar e using the floppy disk label ed Tr ident 9520/25 VGA Driver W indows 95/98 , type A: an d click OK . ...
-
IBM CI5VGM Series - page 86
Chapter 5 VGA Driver Installation Guide 82 CI5VGM U ser’ s Manual Step 5. Select Trident Cyber 9520/25 PCI/AGP (VX .XX. XXXX.9 5) , then click OK . ...
-
IBM CI5VGM Series - page 87
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 83 Step 6. After th e files are copied, click Close . Step 7. Click Yes to restart your com puter and for the new settings to ...
-
IBM CI5VGM Series - page 88
Chapter 5 VGA Driver Installation Guide 84 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows 98 Step 1. Click Start . Select Settings , then click the Control Panel icon. ...
-
IBM CI5VGM Series - page 89
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 85 Step 2. Double click Displa y . ...
-
IBM CI5VGM Series - page 90
Chapter 5 VGA Driver Installation Guide 86 CI5VGM U ser’ s Manual Step 3. Click Settings . ...
-
IBM CI5VGM Series - page 91
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 87 Step 4. Click Adv anced . ...
-
IBM CI5VGM Series - page 92
Chapter 5 VGA Driver Installation Guide 88 CI5VGM U ser’ s Manual Step 5. Click Adapter . ...
-
IBM CI5VGM Series - page 93
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 89 Step 6. Click Change... . ...
-
IBM CI5VGM Series - page 94
Chapter 5 VGA Driver Installation Guide 90 CI5VGM U ser’ s Manual Step 7. Click Nex t . Step 8. Select Display a list of all the driv ers in a specific location, so you can select the driver y ou want. ...
-
IBM CI5VGM Series - page 95
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 91 Step 9. Click Have Disk ... . Step 10 . I f "D :" is your CD ROM, type D:VGATrid9520WIN98 , If you are usin g the floppy disk labeled Tr ident 9520/25 VGA Dr iver W indows 95/98 , ty pe A: and click OK . ...
-
IBM CI5VGM Series - page 96
Chapter 5 VGA Driver Installation Guide 92 CI5VGM U ser’ s Manual Step 11. Select Trident Cy ber 9520/25 PCI/AGP(vx .xx . xxxx. 98 ) , then click OK . Step 12. Cli ck Next . ...
-
IBM CI5VGM Series - page 97
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 93 Step 13. After th e files are copied, click Finish . ...
-
IBM CI5VGM Series - page 98
Chapter 5 VGA Driver Installation Guide 94 CI5VGM U ser’ s Manual Step 12. Cli ck Close . ...
-
IBM CI5VGM Series - page 99
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 95 Step 13. Cli ck Close . Step 14. Click Yes to restart your computer and f or the new settings to take eff ect. ...
-
IBM CI5VGM Series - page 100
Chapter 5 VGA Driver Installation Guide 96 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows NT 4.0 IMPORTANT: You shou ld ins tall th e Window s NT 4.0 Service Pack 3 firs t before ins tallin g the Trident 9520/25 VGA dri vers. If you don't h ave the Window s NT 4.0 Service Pack 3, please contact y our softw are vendor o ...
-
IBM CI5VGM Series - page 101
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 97 6 System Monitor Utility This chapter introduces System Mo nitor Utility th at comes w ith the motherboard in conjunction with the onboard hardware m onitoring IC. The sections in the follow ing pages give th e functions of th e utility. ...
-
IBM CI5VGM Series - page 102
Chapter 6 System Monitor Utility 98 CI5VGM U ser’ s Manual System Monitor is a utility softw are th at oversee th e gen eral performance of sy stems, coverin g areas like s ystem temperature, sy stem voltage, C PU and system fan rotational speeds. If conditions become adversed, that is, wh en voltages are erratic or CPU temperature ex ceeds the s ...
-
IBM CI5VGM Series - page 103
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 99 The follow ing sc reen appears upon clicking on the Sy stem Monitor icon. Clicking on th e upper left corner button w o uld show you the latest compan y in formation . " Sum mary " provides the current s ystem status. The section below describes the different fu nctions of Sy st ...
-
IBM CI5VGM Series - page 104
Chapter 6 System Monitor Utility 100 CI5VGM U ser’ s Manual 2. Po wer - disp lays the cur rent vo ltage status. ...
-
IBM CI5VGM Series - page 105
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 101 3. Memory - displays the curren t memory usage status . ...
-
IBM CI5VGM Series - page 106
Chapter 6 System Monitor Utility 102 CI5VGM U ser’ s Manual 4. Fan Speed - display s the curren t rotational speeds of CPU and chassis fans. 5. Disk - display s the disk supported f o rmats and disk space. ...
-
IBM CI5VGM Series - page 107
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 103 6. Heat - displays th e CPU and sy stem temperatures . 7. Error Log - display s errors occurring af ter Sy stem Monitor is started. ...
-
IBM CI5VGM Series - page 108
Chapter 6 System Monitor Utility 104 CI5VGM U ser’ s Manual 8. Setting - s ets the values at wh ich an alarm is sounded. Voltage : the acceptable voltage ran ge betw een the "MAX" a nd "M IN" va lue. Temperature : temperature th reshold. Fan Rotation Speed : the min imum rotation speed . NOTE : Intel has defined a ma rgin of d ...
-
IBM CI5VGM Series - page 109
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 105 7 LANDesk Client Manager This chapter gives a brief introduction to the optional LANDesk Client Manager (LDCM) u tility, as w ell as the installation procedures. The following items are covered in this chapter: Introduct ion ......................................................... ...
-
IBM CI5VGM Series - page 110
Chapter 7 LAN Desk Clie nt Manager 106 CI5VGM U ser’ s Manual Introduction LANDesk Client Manager provides the capability f or managi ng compon ents (netw ork interface cards , mem ory, printers, sof tw are applications, etc.) w ithin a PC sys tem. It u ses the Desk top Management Interface (DMI) s tandard establish ed by th e Desktop Manag ement ...
-
IBM CI5VGM Series - page 111
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 107 Installation The optio nal LANDesk utility that comes with th e CPU card runs in Window s NT or Window s 95 operating s ystem . Upon en tering the Win dows NT 4.0 or Window s 95 env ironm ent, insert the CD. Windows w ill autorun the installation program and show the followi ng screen. ...
-
IBM CI5VGM Series - page 112
Chapter 7 LAN Desk Clie nt Manager 108 CI5VGM U ser’ s Manual Installing the Loca l Versio n of LDCM Double Click on ‘LA NDesk Client Man ager’ in the initial screen and the followin g screen will appear. Double click on the local version of LANDesk Cli e nt Ma na ger. When the Welcom e screen appears, click on “Ne xt” to co ntinue with S ...
-
IBM CI5VGM Series - page 113
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 109 Choose the directory location wh ere Setup will in stall LANDesk Clien t Manage r. Cl ick “Browse” if y ou want to change the dir ect ory sugge sted . Otherw ise, click “Next” to start installing L DCM. When Setup is finish ed, changes w ill have been made to the file AUTOEXEC. ...
-
IBM CI5VGM Series - page 114
Chapter 7 LAN Desk Clie nt Manager 110 CI5VGM U ser’ s Manual Installing the Administrative Version of LDCM After double clicking on ‘LA NDesk Client Manager’ in the initial screen, select the adm inistrative version of the LDCM and th e Welcome screen below w ill ap p ear. Click on “Next” to continue. The screen below allows y ou to inst ...
-
IBM CI5VGM Series - page 115
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 111 After LANDesk Client Manager Setup is complete, restart your com puter to be able to use the LANDesk Client Manager. ...
-
IBM CI5VGM Series - page 116
Chapter 7 LAN Desk Clie nt Manager 112 CI5VGM U ser’ s Manual This page is intentionally left blank. ...
-
IBM CI5VGM Series - page 117
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 113 8 Ethernet Setup User’s Guide This chapt er gives a brief introduct ion to th e Intel 82558 Fa st Ethern et PCI controller. The following items are covered in this chapter: Introduct ion .............................................................................. 114 Featur ...
-
IBM CI5VGM Series - page 118
Chapter 8 Et hernet Se tup User’ s Guide 114 CI5VGM U ser’ s Manual Introduction Intel 82558B i s a 32-bi t 10/100MBps Eth ernet controller f or PCI local bus- compli ant PCs . It supports th e bus m astering arch itecture, an d Auto-n egotiation feature w hich m ake it possible to co mbine one com mon type of Ethernet cablin g – an RJ- 45 co ...
-
IBM CI5VGM Series - page 119
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 115 LAN D r iver Installation for Windows 95 The CI5VGM comes with a diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers that is to b e used in conjunction w ith the LA N drivers installation. You mu st use the correct drivers in order for LAN to fu nctio ...
-
IBM CI5VGM Series - page 120
Chapter 8 Et hernet Se tup User’ s Guide 116 CI5VGM U ser’ s Manual 2. Click Sy s tem . 3. Click Device Manager . ...
-
IBM CI5VGM Series - page 121
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 117 4. Expand Other Devices . 5. Select PCI Ethernet Controller , then click Properties . [ ...
-
IBM CI5VGM Series - page 122
Chapter 8 Et hernet Se tup User’ s Guide 118 CI5VGM U ser’ s Manual 6. Click Driver . [ 1. ...
-
IBM CI5VGM Series - page 123
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 119 7. Click Update Driver . ...
-
IBM CI5VGM Series - page 124
Chapter 8 Et hernet Se tup User’ s Guide 120 CI5VGM U ser’ s Manual 8. Insert the diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers into the floppy disk dri ve, then cli ck Next . 9. Click Fini sh . Ensure th e updated driv er men tioned is for In tel 82558 Fast Ethernet. ...
-
IBM CI5VGM Series - page 125
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 121 10. Click OK . 11. Type A:, then click OK . 12. Click OK . ...
-
IBM CI5VGM Series - page 126
Chapter 8 Et hernet Se tup User’ s Guide 122 CI5VGM U ser’ s Manual 13. Type the Computer Name and Workgr oup , then click Close . 14. Insert the W indows 95 CD RO M , then click OK . ...
-
IBM CI5VGM Series - page 127
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 123 15. Type D:W in95 (Assuming D:Win95 is the director y location of the Windows 95 files), then click OK . 16. Click Yes to restart the com puter and for th e settings to tak e effect. ...
-
IBM CI5VGM Series - page 128
Chapter 8 Et hernet Se tup User’ s Guide 124 CI5VGM U ser’ s Manual LAN Driver Ins tall ation fo r Window s NT 4.0 The CI5VGM comes with a diskette labeled Intel 82558B LAN W i ndows 95/98 & W indows NT 4.0 Driv ers that is to be used in conjunction of the LAN drivers installation. Follow the steps below to install the drivers for Window s ...
-
IBM CI5VGM Series - page 129
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 125 Running Diagnostics The CI5VGM comes w ith a diskette contain ing the diagnostic sof tw are supporti ng the Intel 82558B Ethern et controll er. Follow the steps below to use the Setup Utility . 1. Run the file SETUP.EX E typing a:setup in the DOS prompt , assu min g your f lop ...
-
IBM CI5VGM Series - page 130
Chapter 8 Et hernet Se tup User’ s Guide 126 CI5VGM U ser’ s Manual 3. Selecting Test adapter w ill show the f ollowing screen . 8255x-based PCI EtherE xpress™ adapter Set up V4.16 Test adapter Bus=0 Dev=0Bh S lot=11 Addr=004063001000 I RQ=10 Diagnosti c test s: Adapter test s ……………………………. Passed Onboard loopback tes ts ...
-
IBM CI5VGM Series - page 131
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 127 5. Upon selectin g Others under the Install network drivers main me nu screen, the followin g screen w ill app ear. 8255x-based PCI EtherE xpress™ adapter Set up V4.16 Other 1. LANtas tic 6. 0 2. Banyan 6.00 NDI S workst at i on 3. NDIS 2. x driver notes (OS/2*, LA N Manager* ...
-
IBM CI5VGM Series - page 132
Appendix 128 CI5VGM U ser’ s Manual Appendix A. I/O Port Address M ap B. Interrupt Request Lines (IRQ) ...
-
IBM CI5VGM Series - page 133
Appendix CI5VGM U ser’ s Manual 129 A. I/O Port Address M ap Each peripheral devi ce in the sy stem is ass igned a s et of I/O port addresses wh ich also becomes the identity of the device. There are a total of 1K port address s pace available. The follow ing table lists the I/O port addresses u sed on th e Industrial C P U Card. Address Device D ...
-
IBM CI5VGM Series - page 134
Appendix 130 CI5VGM U ser’ s Manual B. Interrupt Request Lines (IRQ) There are a total of 15 IR Q lines available on the Indus trial CPU Card. Peripheral devices use interrupt request lines to notify CPU for the service required. The f ollow ing table show s the IRQ us ed by the devices on the In dustrial CPU Card. Level Function IRQ0 Sys tem Tim ...
Do you have a question concerning IBM CI5VGM Series?
Use the form below
If you did not solve your problem by using a manual IBM CI5VGM Series, ask a question using the form below. If a user had a similar problem with IBM CI5VGM Series it is likely that he will want to share the way to solve it.