English dropdown-ico

Manual Beko CDA 540

17 pages 0.7 mb
Download

Go to site of 17

Summary
  • Beko CDA 540 - page 1

    ...

  • Beko CDA 540 - page 2

    Congratulations on your choice of a quality Appliance which has been designed to give you service for many years. WARNING ! IMPORTANT ! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if t ...

  • Beko CDA 540 - page 3

    CONTENTS PAGE SAFETY FIRST / ELECTRIC AL REQUIREMENTS 3 TRANSPORTA TIO N INSTRUCTION S 4 INSTALLATION INSTRUCTIONS 4 GETTING TO KNOW YOUR COMB I BEKO FRIDGE / FREEZER 6 REVERSING THE DOOR 7 SUGGESTED ARRANGEMENT OF F OOD IN THE FRIDGE/FREEZ ER 8 TEMPERATURE ADJUSTMENT 9 BEFORE OPERATING 9 STORING FROZEN FOOD 9 FREEZING FR ES H FO OD 10 MAKING ICE C ...

  • Beko CDA 540 - page 4

    ELECTRICAL REQUIREMENTS Before you insert the plug into the wall so cket make sure that the voltage and the frequency shown in the rating plate inside the appliance corr esponds to your el ectricity supply. Rating label is on the left ha nd side of fridge inner liner. We recommend that this appliance is conn ected to the mains supply vi a a suitabl ...

  • Beko CDA 540 - page 5

    TRANSPORTATION INSTRUCTIONS 1. The appliance should be transported only in an upright positi on. The packing as supplied must be intact during transportation. 2. If during the course of transport t he appliance has to be transporte d horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringin ...

  • Beko CDA 540 - page 6

    4. Make sure that suffi cient room is provided around the appliance to ensure free air circulation. Fit the two plastic wall spacer supplied with the appliance rotating 1/4 turn to the condenser at the back of the refrigerator (see diagram). 5. The fridge/freezer should be located on a smooth surface. The tw o front feet can be adjusted as required ...

  • Beko CDA 540 - page 7

    GETTING TO KNOW YOUR COMB I BEKO FRIDGE / FREEZER 1 - Thermostat knob and interior light 2 - Interior light button 3 - Cabinet shelves 4 - Defrost wate r collection channel 5 - Salad crisper cover 6 - Salad crispers 7 - Ice Bank & ice cube tray 8 - Fast Freeze compartment 9 - Frozen froods storage drawer 10 - Adjustable feet 11 - Egg tray 11 - ...

  • Beko CDA 540 - page 8

    REVERSING THE DOORS 1- Switch off the appliance at the socket outlet and pull out the mains plug. 2- Remove all loose items and fittings and food, if any, from inside the appliance and doo r racks. 3- Unscrew the bolts and remove the middle hing e while holding doors. (1) 4- Remove the fridge door from the top hinge. (2 ) 6- Remove the plastic cove ...

  • Beko CDA 540 - page 9

    SUGGESTED ARRANGEMENT OF FO OD IN THE FRIDGE/FREEZER Arrangement Examples (See diagram) 1. Baked, chilled cooked food, dairy products, cans. 2. Meat, saus ages, co ld cuts . 3. Fruit, vegetables, salads. 4. Making, storing ice cubes. 5. Frozen food and freezing of fresh food. 6. Frozen food. 7. Butter, cheese, eggs, small bottles, cans, tubes. 8. T ...

  • Beko CDA 540 - page 10

    TEMPERATURE ADJUSTMENT Operating temperatures are co ntrolled by the thermostat kn ob (Item 5) and may be set at any position between 1 and 5 (the coldest position). The average temperature insi de the fridge should be around +5°C (+41°F). Therefore adjust the thermostat to obtain th e desire d temper ature. Some sections of the fridge may be coo ...

  • Beko CDA 540 - page 11

    FREEZING FRESH FOOD Please observe the following instruct ions to obtain th e best results. Do not freeze too large a quantity at any one time. The quality of the f ood is best preserved when it is frozen right thro ugh to the core as quickly as possible. Do not exceed the freezi ng capacity of your ap pliance in 24 h. Placing warm food into the fr ...

  • Beko CDA 540 - page 12

    B) Freezer compartment Defrosting is very straightforward and without mess, thanks to a special defrost collection basin. Defrost twice a year or when a frost layer of around 7 (1/4") mm has formed. To start the defrosting procedure, switch off the appliance at the socket outlet and pul l out the mains plug. All food should be wrapped in sever ...

  • Beko CDA 540 - page 13

    CLEANING AND CARE 1. We recommend that y ou switch off the appliance at th e socket outlet and pull out the mains plug bef ore cleaning. 2. Never use any sharp inst rument s or abrasive subs tances, soap, household cleaner, detergent or wax polish for cleaning. 3. Use luke warm water to clean the ca binet of the applianc e and wipe it dry. 4. Use a ...

  • Beko CDA 540 - page 14

    DO’S AND DON’TS Do- Clean and defrost your appliance regularly (See "Cleaning and Care") Do- Keep raw meat and poultry below cooked food and dairy products. Do- Take off any unusable leaves on vegetables and wipe off any soil. Do- Leave lettuce, cabbage, parsley and cauliflower on the stem. Do- Wrap cheese firstly in greaseproof paper ...

  • Beko CDA 540 - page 15

    ENERGY SAVING TIPS 1- Ensure your appliance is instolled in a well ventilated area. If the ambient temperature is low (but in no case lower t han 5 degrees C), then the energy sa ving will be more. In this case, check temperatures of fridge and freezer compartments with an accurate thermometer and lower the thermostat se tting (towards 1) if necess ...

  • Beko CDA 540 - page 16

    GUARANTEE DETAILS Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a re sult of faulty materials, defective components or manufacturing defect. • The cost of functional replacement pa rts, but excluding consumable items. ? ...

  • Beko CDA 540 - page 17

    HOW TO OBTAIN SERVICE Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the prod uct require attenti on under guarantee. You should also complete the de tails below; it will help us assist you when requesting service. (The model number is printed on the Instruction Booklet and the serial n ...

Manufacturer Beko Category Refrigerator

Documents that we receive from a manufacturer of a Beko CDA 540 can be divided into several groups. They are, among others:
- Beko technical drawings
- CDA 540 manuals
- Beko product data sheets
- information booklets
- or energy labels Beko CDA 540
All of them are important, but the most important information from the point of view of use of the device are in the user manual Beko CDA 540.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Beko CDA 540, service manual, brief instructions and user manuals Beko CDA 540. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Beko CDA 540.

Similar manuals

A complete manual for the device Beko CDA 540, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Beko CDA 540 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Beko CDA 540.

A complete Beko manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Beko CDA 540 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Beko CDA 540, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Beko CDA 540, that we can find in the current document
3. Tips how to use the basic functions of the device Beko CDA 540 - which should help us in our first steps of using Beko CDA 540
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Beko CDA 540
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Beko CDA 540 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Beko CDA 540?

Use the form below

If you did not solve your problem by using a manual Beko CDA 540, ask a question using the form below. If a user had a similar problem with Beko CDA 540 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)