English dropdown-ico

Manual JVC 1004MKH-VT-VT

99 pages 3.71 mb
Download

Go to site of 99

Summary
  • JVC 1004MKH-VT-VT - page 1

    1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 500 5807 3 L T -17C50BJ WIDE LCD P ANEL TV INSTRUCTIONS ENGLISH D:Aldus Page Maker OnemliIB-NEWJVCAk-452835 (16-9)3D-(AV28-GT20U)COVER PAGE-2835-AK45-1512UK-16-9-(AV-28GT20U)-50053856.cdr 19 Ekim 2004 Sal 10:24:11 Color profile: Disabled Composite Default screen ...

  • JVC 1004MKH-VT-VT - page 2

    - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety . They are of a general nature, intended to help you with all ...

  • JVC 1004MKH-VT-VT - page 3

    - 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug be- for ...

  • JVC 1004MKH-VT-VT - page 4

    - 3 - W ARNING  Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.  The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.  Do not allow children to hang from the TV , place their el- bows on the TV or lea ...

  • JVC 1004MKH-VT-VT - page 5

    - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by:  fire;  earthquake;  accidental damage;  intentional misuse of the product;  use of the product in improper conditions;  loss and/or damage caused to the product whilst in the p ...

  • JVC 1004MKH-VT-VT - page 6

    - 5 - Remote Control Buttons / I = (St and By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT-2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button = V olume + / - buttons T eletext / VCR /DVD Control bu ...

  • JVC 1004MKH-VT-VT - page 7

    - 6 - Control Panel Buttons With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:40 6 ...

  • JVC 1004MKH-VT-VT - page 8

    - 7 - Using the stand This TV comes with a T able T op St and already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right. Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt th ...

  • JVC 1004MKH-VT-VT - page 9

    - 8 - Remove the terminal Cover There are connection terminals behind the covers of the rear of the TV . Remove the cover before connecting an antenna, DVD or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side or bottom of the covers against the TV and insert the hooks.  Leave the covers off if they do not fi ...

  • JVC 1004MKH-VT-VT - page 10

    - 9 - Where to install Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Place on a sturdy platform, the mounting surface should be flat and steady , it should then be secured to the wall with a sturdy tie using the hook on the back of the TV , this will prevent it from fallin ...

  • JVC 1004MKH-VT-VT - page 11

    - 10 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set. Features  It is a remote controlled colour television and PC monitor .  100 programmes ...

  • JVC 1004MKH-VT-VT - page 12

    - 11 - Connections to the RF input socket  Connect the aerial or cable TV plug to the RF input socket located at the back of the TV and connect the cable plug coming out from the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT A NT : Switch off the TV before connect- ing any extern ...

  • JVC 1004MKH-VT-VT - page 13

    - 12 - Operating the TV You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area. T o cancel APS before starting, press BLUE button. ...

  • JVC 1004MKH-VT-VT - page 14

    - 13 - download was not performed correctly . Before trying to download again, check that:  The VCR power is turned on.  The VCR is T -V LINK compatible.  The VCR is connected to the Ext-2.  The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV . For details, read the manual ...

  • JVC 1004MKH-VT-VT - page 15

    - 14 - Programme Selection (Previous or next programme)  Press   button to select the previous programme.  Press   button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9. TV will switch to the selected programme. T o select ...

  • JVC 1004MKH-VT-VT - page 16

    - 15 -  By pressing   or   button you may choose one of these options: Soft, S tandard and Bright. Setting Contrast  Using   or   button select Contrast.  Press   button to increase contrast level.  Press   button to decrease contrast level. Setting Bright-1  Using   or   button select ...

  • JVC 1004MKH-VT-VT - page 17

    - 16 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once. Note 2: At moving pictures, while Noise Reduction is at maximum level, some pict ...

  • JVC 1004MKH-VT-VT - page 18

    - 17 - Use this settings to adjust volume for audio out terminal which is located at the right side of the TV .  Using   or   button select Audio Out.  Press   or   button or directly press  OK  button on Audio Out , to enter the Audio Out menu. Audio Out V olume  As you enter the Audio Out sound menu, V ol- u ...

  • JVC 1004MKH-VT-VT - page 19

    - 18 - T o Store Settings In Feature menu all settings are stored auto- matically . Install Menu Press " MENU " button, now you are in main menu. In the main menu, select  Install  using  or   button. Then enter the In- stall menu pressing  /   or  OK  but- ton. In EXT mode, Install menu appears like this: ...

  • JVC 1004MKH-VT-VT - page 20

    - 19 - T o Store Settings  Press   /   or  OK  button on Store option to store Install menu settings.  After stored, T -V LINK menu will appear . If you do not need to do T -V LINK, press BLUE but- ton to exit the menu. Program Menu Press " MENU " button, now you are in main menu. In the main menu, select  Progr ...

  • JVC 1004MKH-VT-VT - page 21

    - 20 - ton. T o learn the features of this function see " Autostore " below . Autostore, searches and stores all channels automatically on your TV , according to the transmission of programme systems in your area. First of all choose the  Country  by using   or   button. After Autostore is finalized, a programme list wil ...

  • JVC 1004MKH-VT-VT - page 22

    - 21 - Picture Mode Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright. Sleep Timer Sleep Timer mode OSD is displayed when YELLOW button is pressed. The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed betwee ...

  • JVC 1004MKH-VT-VT - page 23

    - 22 - Zoom Modes Zoom mode can be changed by pressing Red button. Y ou can change the screen size ac- cording to the picture aspect ratio. Select the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) sig- nal, which shows the aspect ratio of the pic- ture, is included in the broadcast signal or the signal from an ...

  • JVC 1004MKH-VT-VT - page 24

    - 23 - PC Mode Installation  Power off both Computer and Display before making any connections.  Set your PCs resolution correctly before con- necting to the TV . See the table in page 30 for supported modes.  Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal. If you want to listen to the sou ...

  • JVC 1004MKH-VT-VT - page 25

    - 24 - PC Picture Menu In the Main menu, select  PC Picture  using   or   button, then enter the PC Picture menu pressing   /   or  OK  buttons. Contrast, Bright-1 and Colour T emperature adjustments in this menu are identical to ad- justments defined in TV picture menu. R, G , and B adjust the TV image colour in ...

  • JVC 1004MKH-VT-VT - page 26

    - 25 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume c ...

  • JVC 1004MKH-VT-VT - page 27

    - 26 -  T eletext page number will be displayed on the upper left corner of the screen when the selected page is found.  Press   button to display the selected T eletext p age. T o exit T eletext  Press   button. The screen will switch to TV mode. Fastext and T optext Y our TV supports the 7 page T eletext system. When the page ...

  • JVC 1004MKH-VT-VT - page 28

    - 27 - If you have a device which outputs component signal, connect it to the EXT -3 terminal with a component video cable. V ia the ANT (aerial) socket If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.  T o store the test signal that ...

  • JVC 1004MKH-VT-VT - page 29

    - 28 - Peripheral Equipment Connections JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:41 28 ...

  • JVC 1004MKH-VT-VT - page 30

    - 29 - Peripheral Equipment Connections DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:41 29 ...

  • JVC 1004MKH-VT-VT - page 31

    - 30 - PC Input T ypical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. The native resolution of the TFT -LCD Panel is 1280 x 768. Therefore using Mode ...

  • JVC 1004MKH-VT-VT - page 32

    - 31 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abnormal Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equip- ment or neon ligh ...

  • JVC 1004MKH-VT-VT - page 33

    - 32 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VH F (V H) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1- S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - ...

  • JVC 1004MKH-VT-VT - page 34

    1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 500 5833 4 INSTRUCTIONS ENGLISH DEUTSCH FRANÇAIS BREITBILD-LCD-TV BEDIENUNGSANLEITUNG TÉLÉVISEUR À GRAND ÉCRAN LCD MANUEL D'INSTRUCTIONS IT ALIANO TV A PIENO SCHERMO LCD ISTRUZIONI L T -17C50BU L T -17C50SU WIDE LCD P ANEL TV D:Aldus Page Maker OnemliIB-NEWJVCAk-452835 (16-9)3 ...

  • JVC 1004MKH-VT-VT - page 35

    ENGLISH - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety . They are of a general nature, intended to help you w ...

  • JVC 1004MKH-VT-VT - page 36

    ENGLISH - 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug ...

  • JVC 1004MKH-VT-VT - page 37

    ENGLISH - 3 - W ARNING  Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.  The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.  Do not allow children to hang from the TV , place their elbows on the TV ...

  • JVC 1004MKH-VT-VT - page 38

    ENGLISH - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by:  fire;  earthquake;  accidental damage;  intentional misuse of the product;  use of the product in improper conditions;  loss and/or damage caused to the product whilst ...

  • JVC 1004MKH-VT-VT - page 39

    ENGLISH - 5 - Remote Control Buttons / I = (S tand By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT-2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button = V olume + / - buttons T eletext / VCR /DVD Co ...

  • JVC 1004MKH-VT-VT - page 40

    ENGLISH - 6 - Control Panel Buttons With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. 01-ENG-1724W-17MB08P-1860UK-(LT-17C50BU&SU)-50058334.p65 18.11.2004, 14:10 6 ...

  • JVC 1004MKH-VT-VT - page 41

    ENGLISH - 7 - Using the stand This TV comes with a T able T op St and already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right. Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly ...

  • JVC 1004MKH-VT-VT - page 42

    ENGLISH - 8 - Remove the terminal Cover There are connection terminals behind the covers of the rear of the TV . Remove the cover before connecting an antenna, DVD or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side or bottom of the covers against the TV and insert the hooks.  Leave the covers off if they d ...

  • JVC 1004MKH-VT-VT - page 43

    ENGLISH - 9 - Where to install Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Place on a sturdy platform, the mounting surface should be flat and steady , it should then be secured to the wall with a sturdy tie using the hook on the back of the TV , this will prevent it fro ...

  • JVC 1004MKH-VT-VT - page 44

    ENGLISH - 1 0 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set. Features  It is a remote controlled colour television and PC monitor .  100 p ...

  • JVC 1004MKH-VT-VT - page 45

    ENGLISH - 1 1 - the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT A NT : Switch off the TV before connect- ing any external device. Sockets for external connections are at the back of the TV . For connection of other devices via Euroconnector refer to the manuals of the related devi ...

  • JVC 1004MKH-VT-VT - page 46

    ENGLISH - 1 2 - Operating the TV You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area. T o cancel APS before starting, press BLU ...

  • JVC 1004MKH-VT-VT - page 47

    ENGLISH - 1 3 - download was not performed correctly . Before trying to download again, check that:  The VCR power is turned on.  The VCR is T-V Link compatible.  The VCR is connected to the Ext-2.  The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV . For details, read th ...

  • JVC 1004MKH-VT-VT - page 48

    ENGLISH - 1 4 - Programme Selection (Previous or next programme)  Press   button to select the previous programme.  Press   button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9. TV will switch to the selected programme. T ...

  • JVC 1004MKH-VT-VT - page 49

    ENGLISH - 1 5 -  By pressing   or   button you may choose one of these options: Soft , Standard and Bright . Setting Contrast  Using   or   button select Contrast .  Press   button to increase contrast level.  Press   button to decrease contrast level. Setting Bright-1  Using   or   but ...

  • JVC 1004MKH-VT-VT - page 50

    ENGLISH - 1 6 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once. Note 2: At moving pictures, while Noise Reduction is at maximum level, ...

  • JVC 1004MKH-VT-VT - page 51

    ENGLISH - 1 7 - Use this settings to adjust volume for audio out terminal which is located at the right side of the TV .  Using   or   button select Audio Out .  Press   or   button or directly press  OK  button on Audio Out , to enter the Audio Out menu. Audio Out V olume  As you enter the Audio Out sound men ...

  • JVC 1004MKH-VT-VT - page 52

    ENGLISH - 1 8 - Blue Back (During No Signal) The Blue Back Feature can be set by   or   button to either On or Off . T o Store Settings In Feature menu all settings are stored auto- matically . Install Menu Press  MENU  button, now you are in main menu. In the main menu, select  Install  using  or   button. Then ent ...

  • JVC 1004MKH-VT-VT - page 53

    ENGLISH - 1 9 -  If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode on. For this, while the cursor is on this item press the  or   buttons to set it  On .  If you want to watch a DVD , then you must set this item off; because DVD is not a source like a VCR and to see ...

  • JVC 1004MKH-VT-VT - page 54

    ENGLISH - 2 0 - 3. Press   /   /   /   button to choose new programme number. 4. Press the GREEN button to insert the chan- nel to the chosen programme number . Autostore: T o enter Autostore menu, press the BLUE but- ton. T o learn the features of this function see  Autostore  below . Autostore, searches and stores al ...

  • JVC 1004MKH-VT-VT - page 55

    ENGLISH - 2 1 - ence between left and right channels. Hyper Sound selection will be displayed on the screen when the TV S tatus button is pressed or programme is changed. Picture Mode Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright. Sleep Timer Sleep Timer mode OSD is displayed wh ...

  • JVC 1004MKH-VT-VT - page 56

    ENGLISH - 2 2 - In order to quit the EXT mode press any digit buttons or   or  . Zoom Modes Zoom mode can be changed by pressing Red button. Y ou can change the screen size ac- cording to the picture aspect ratio. Select the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) sig- nal, which shows the as ...

  • JVC 1004MKH-VT-VT - page 57

    ENGLISH - 2 3 - PC Mode Installation  Power off both Computer and Display before making any connections.  Set your PCs resolution correctly before con- necting to the TV . See the table in page 30 for supported modes.  Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal. If you want to listen t ...

  • JVC 1004MKH-VT-VT - page 58

    ENGLISH - 2 4 - PC Picture Menu In the Main menu, select  PC Picture  using   or   button, then enter the PC Picture menu pressing   /   or  OK  buttons. Contrast, Bright-1 and Colour T emperature adjustments in this menu are identical to ad- justments defined in TV picture menu. R, G , and B adjust the TV image ...

  • JVC 1004MKH-VT-VT - page 59

    ENGLISH - 2 5 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but ...

  • JVC 1004MKH-VT-VT - page 60

    ENGLISH - 2 6 - the upper left corner of the screen when the selected page is found.  Press   button to display the selected T eletext p age. T o exit T eletext  Press   button. The screen will switch to TV mode. Fastext and T optext Y our TV supports the 7 page T eletext system. When the page number of any of the 7 pages in memor ...

  • JVC 1004MKH-VT-VT - page 61

    ENGLISH - 2 7 - signal, connect it to the EXT -3 terminal with a component video cable. Via the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.  T o store the test signal that comes from the equipment, see  ...

  • JVC 1004MKH-VT-VT - page 62

    ENGLISH - 2 8 - Peripheral Equipment Connections 01-ENG-1724W-17MB08P-1860UK-(LT-17C50BU&SU)-50058334.p65 18.11.2004, 14:10 28 ...

  • JVC 1004MKH-VT-VT - page 63

    ENGLISH - 2 9 - Peripheral Equipment Connections DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections 01-ENG-1724W-17MB08P-1860UK-(LT-17C50BU&SU)-50058334.p65 18.11.2004, 14:10 29 ...

  • JVC 1004MKH-VT-VT - page 64

    ENGLISH - 3 0 - PC Input T ypical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. The native resolution of the TFT -LCD Panel is 1280 x 768. Therefore us ...

  • JVC 1004MKH-VT-VT - page 65

    ENGLISH - 3 1 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abnormal Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equip- ment or ...

  • JVC 1004MKH-VT-VT - page 66

    ENGLISH - 3 2 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VHF ( VH ) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timi ...

  • JVC 1004MKH-VT-VT - page 67

    1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 50 05 87 83 L T -17C88SJ WIDE LCD P ANEL TV INSTRUCTIONS ENGLISH D:Aldus Page Maker OnemliIB-NEWJVCAk-452835 (16-9)3D-(AV28-GT20U)COVER PAGE-2835-AK45-1512UK-16-9-(AV-28GT20U)-50053856.cdr 21 Aral k 2004 Sal 16:28:08 Color profile: Disabled Composite Default screen ...

  • JVC 1004MKH-VT-VT - page 68

    - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety . They are of a general nature, intended to help you with all ...

  • JVC 1004MKH-VT-VT - page 69

    - 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug be- for ...

  • JVC 1004MKH-VT-VT - page 70

    - 3 - W ARNING  Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.  The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.  Do not allow children to hang from the TV , place their el- bows on the TV or lea ...

  • JVC 1004MKH-VT-VT - page 71

    - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by:  fire;  earthquake;  accidental damage;  intentional misuse of the product;  use of the product in improper conditions;  loss and/or damage caused to the product whilst in the p ...

  • JVC 1004MKH-VT-VT - page 72

    - 5 - Remote Control Buttons / I = (St and By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT-2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button = V olume + / - buttons T eletext / VCR /DVD Control bu ...

  • JVC 1004MKH-VT-VT - page 73

    - 6 - Control Panel Buttons With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. JVC LT-17C88SJ-50058783.p65 15.02.2005, 13:48 6 ...

  • JVC 1004MKH-VT-VT - page 74

    - 7 - Using the stand This TV comes with a T able T op St and already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right. Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt th ...

  • JVC 1004MKH-VT-VT - page 75

    - 8 - Remove the terminal Cover There are connection terminals behind the covers of the rear of the TV . Remove the cover before connecting an antenna, DVD or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side or bottom of the covers against the TV and insert the hooks.  Leave the covers off if they do not fi ...

  • JVC 1004MKH-VT-VT - page 76

    - 9 - Where to install Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Place on a sturdy platform, the mounting surface should be flat and steady , it should then be secured to the wall with a sturdy tie using the hook on the back of the TV , this will prevent it from fallin ...

  • JVC 1004MKH-VT-VT - page 77

    - 10 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set. Features  It is a remote controlled colour television and PC monitor .  100 programmes ...

  • JVC 1004MKH-VT-VT - page 78

    - 11 - the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT A NT : Switch off the TV before connect- ing any external device. Sockets for external connections are at the back of the TV . For connection of other devices via Euroconnector refer to the manuals of the related devices. Inse ...

  • JVC 1004MKH-VT-VT - page 79

    - 12 - Operating the TV You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area. T o cancel APS before starting, press BLUE button. ...

  • JVC 1004MKH-VT-VT - page 80

    - 13 - download was not performed correctly . Before trying to download again, check that:  The VCR power is turned on.  The VCR is T -V LINK compatible.  The VCR is connected to the EXT -2 .  The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV . For details, read the manu ...

  • JVC 1004MKH-VT-VT - page 81

    - 14 - Programme Selection (Previous or next programme)  Press   button to select the previous programme.  Press   button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9. TV will switch to the selected programme. T o select ...

  • JVC 1004MKH-VT-VT - page 82

    - 15 -  By pressing   or   button you may choose one of these options: Soft , Standard and Bright . Setting Contrast  Using   or   button select Contrast .  Press   button to increase contrast level.  Press   button to decrease contrast level. Setting Bright-1  Using   or   button selec ...

  • JVC 1004MKH-VT-VT - page 83

    - 16 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once. Note 2: At moving pictures, while Noise Reduction is at maximum level, some pict ...

  • JVC 1004MKH-VT-VT - page 84

    - 17 - Use this settings to adjust volume for audio out terminal which is located at the right side of the TV .  Using   or   button select Audio Out .  Press   or   button or directly press  OK  button on Audio Out, to enter the Audio Out menu. Audio Out V olume  As you enter the Audio Out sound menu, V ol- u ...

  • JVC 1004MKH-VT-VT - page 85

    - 18 - T o Store Settings In Feature menu all settings are stored auto- matically . Install Menu Press " MENU " button, now you are in main menu. In the main menu, select  Install  using  or   button. Then enter the In- stall menu pressing  /   or  OK  but- ton. In EXT mode, Install menu appears like this: ...

  • JVC 1004MKH-VT-VT - page 86

    - 19 - T o Store Settings  Press   /   or  OK  button on Store option to store Install menu settings.  After stored, T -V LINK menu will appear . If you do not need to do T -V LINK, press BLUE but- ton to exit the menu. Program Menu Press " MENU " button, now you are in main menu. In the main menu, select  Progr ...

  • JVC 1004MKH-VT-VT - page 87

    - 20 - ton. T o learn the features of this function see " Autostore " below . Autostore, searches and stores all channels automatically on your TV , according to the transmission of programme systems in your area. First of all choose the  Country  by using   or   button. After Autostore is finalized, a programme list wil ...

  • JVC 1004MKH-VT-VT - page 88

    - 21 - Picture Mode Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright. Sleep Timer Sleep Timer mode OSD is displayed when YELLOW button is pressed. The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed betwee ...

  • JVC 1004MKH-VT-VT - page 89

    - 22 - AUTO: When a WSS (Wide Screen Signalling) sig- nal, which shows the aspect ratio of the pic- ture, is included in the broadcast signal or the signal from an external device, the TV auto- matically changes the ZOOM mode to 16:9 ZOOM mode P ANORAMIC or FULL mode ac- cording to the WSS signal.  When the AUTO mode does not function cor- rectl ...

  • JVC 1004MKH-VT-VT - page 90

    - 23 - PC Mode Installation  Power off both Computer and Display before making any connections.  Set your PCs resolution correctly before con- necting to the TV . See the table in page 30 for supported modes.  Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal. If you want to listen to the sou ...

  • JVC 1004MKH-VT-VT - page 91

    - 24 - PC Picture Menu In the Main menu, select  PC Picture  using   or   button, then enter the PC Picture menu pressing   /   or  OK  buttons. Contrast, Bright-1 and Colour T emperature adjustments in this menu are identical to ad- justments defined in TV picture menu. R, G , and B adjust the TV image colour in ...

  • JVC 1004MKH-VT-VT - page 92

    - 25 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume c ...

  • JVC 1004MKH-VT-VT - page 93

    - 26 - the upper left corner of the screen when the selected page is found.  Press   button to display the selected T eletext p age. T o exit T eletext  Press   button. The screen will switch to TV mode. Fastext and T optext Y our TV supports the 7 page T eletext system. When the page number of any of the 7 pages in memory is ente ...

  • JVC 1004MKH-VT-VT - page 94

    - 27 - signal, connect it to the EXT -3 terminal with a component video cable. V ia the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.  T o store the test signal that comes from the equipment, see  Install ...

  • JVC 1004MKH-VT-VT - page 95

    - 28 - Peripheral Equipment Connections JVC LT-17C88SJ-50058783.p65 15.02.2005, 13:49 28 ...

  • JVC 1004MKH-VT-VT - page 96

    - 29 - Peripheral Equipment Connections DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections JVC LT-17C88SJ-50058783.p65 15.02.2005, 13:49 29 ...

  • JVC 1004MKH-VT-VT - page 97

    - 30 - PC Input T ypical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. The native resolution of the TFT -LCD Panel is 1280 x 768. Therefore using Mode ...

  • JVC 1004MKH-VT-VT - page 98

    - 31 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abnormal Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equip- ment or neon ligh ...

  • JVC 1004MKH-VT-VT - page 99

    - 32 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VH F (V H) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1- S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - ...

Manufacturer JVC Category Flat Panel Television

Documents that we receive from a manufacturer of a JVC 1004MKH-VT-VT can be divided into several groups. They are, among others:
- JVC technical drawings
- 1004MKH-VT-VT manuals
- JVC product data sheets
- information booklets
- or energy labels JVC 1004MKH-VT-VT
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC 1004MKH-VT-VT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC 1004MKH-VT-VT, service manual, brief instructions and user manuals JVC 1004MKH-VT-VT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC 1004MKH-VT-VT.

Similar manuals

A complete manual for the device JVC 1004MKH-VT-VT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC 1004MKH-VT-VT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC 1004MKH-VT-VT.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC 1004MKH-VT-VT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC 1004MKH-VT-VT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC 1004MKH-VT-VT, that we can find in the current document
3. Tips how to use the basic functions of the device JVC 1004MKH-VT-VT - which should help us in our first steps of using JVC 1004MKH-VT-VT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC 1004MKH-VT-VT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC 1004MKH-VT-VT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC 1004MKH-VT-VT?

Use the form below

If you did not solve your problem by using a manual JVC 1004MKH-VT-VT, ask a question using the form below. If a user had a similar problem with JVC 1004MKH-VT-VT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)