Manual Kenwood KDC-W4527G

36 pages 0.56 mb
Download

Go to site of 36

Summary
  • Kenwood KDC-W4527G - page 1

    KDC-W4527 KDC-W4527G © B64-2691-00/00 (EF) CD-RECEIVER INSTRUCTION MANUAL KDC-W4527_Cover/E_r2.1 03.11.14 1:10 PM Page 1 ...

  • Kenwood KDC-W4527G - page 2

    — 2 — English Contents Safety precautions ......................3 About CDs ...................................5 Notes on playing MP3/WMA.......6 General features .........................8 Power Selecting the Source V olume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Theft Deterrent Faceplate TEL Mute T uner fe ...

  • Kenwood KDC-W4527G - page 3

    — 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) ...

  • Kenwood KDC-W4527G - page 4

    — 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer . •P ress the reset button if the Disc auto changer fails to operate correctly . Normal operatio ...

  • Kenwood KDC-W4527G - page 5

    — 5 — About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...

  • Kenwood KDC-W4527G - page 6

    — 6 — English Notes on playing MP3/WMA This unit can play MP3(MPEG1, 2 Audio Layer 3)/WMA. Note, however , that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Acceptable media The MP3/WMA recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW . When ...

  • Kenwood KDC-W4527G - page 7

    — 7 — MP3/WMA playing order When selected for play , Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played. Y ou may be able to set the ...

  • Kenwood KDC-W4527G - page 8

    Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" CD "CD" External disc ( Optional accessory )" C D CH" Auxiliary input ( Optional accessory )" AUX EXT" Standby (Illumination only mode) "ST ANDBY&qu ...

  • Kenwood KDC-W4527G - page 9

    Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "FLA T" Rock "ROCK" T op 40 "TOP40" Pops "POPS" Ja ...

  • Kenwood KDC-W4527G - page 10

    Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Program Service name or Frequency Radio text, Program Service name or Frequency "R-TEXT" Clock Switching Display 3 Select the Speaker type Press the [ 4 ] or [ ¢ ] button ...

  • Kenwood KDC-W4527G - page 11

    The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while ...

  • Kenwood KDC-W4527G - page 12

    F. SE L SCAN AUD TI RDM REP M.RDM DISP MENU VOL ADJ OFF SCRL PTY L O U D EXTERNAL MEDIA CONTROL AM FM MENU SRC ¢ 4 1 - 6 T uner features The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL& ...

  • Kenwood KDC-W4527G - page 13

    Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. Preset T uning Putting a station with good reception in the memory automatically . 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for a ...

  • Kenwood KDC-W4527G - page 14

    Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the T raffic Information function turns ON or OFF . When it's ON, "TI" indicator is ON. When a traffic information station isn't being received the ...

  • Kenwood KDC-W4527G - page 15

    14. Light Classical "LIGHT M" 15. Serious Classical "CLASSICS" 16. Other Music "OTHER M" 17. Weather "WEA THER" 18. Finance "FINANCE" 19. Children's programs "CHILDREN" 20. Social Affairs "SOCIAL" 21. Religion "RELIGION" 22. Phone In "PHONE IN" 23. T rave ...

  • Kenwood KDC-W4527G - page 16

    Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 15). 2 Enter Changing Language mode Press the [DISP] button. 3 Select the language Press the desired [1] — [3] button. Button Language [1] English [2] French [3] German 4 Exit Changing Language mode Press the [DISP] button. Changing Language ...

  • Kenwood KDC-W4527G - page 17

    When a disc is inserted Press the [SRC] button. Select the "CD" display . When a disc is inserted, the "IN" indicator is ON. Eject the disc Press the [ 0 ] button. 3 in. (8cm) disc cannot be played. Using an adapter and inserting them into this unit can cause damage. The MP3/WMA media that this unit can play are CD-ROM, CD-R, an ...

  • Kenwood KDC-W4527G - page 18

    Replaying the song, disc in the Disc changer or MP3/WMA folder you're listening to. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below . In CD & External disc source Repeat play Display T rack Repeat "REP ON"/ "TREP ON" Disc Repeat (In Disc Changer) "DREP ON" OFF &q ...

  • Kenwood KDC-W4527G - page 19

    Play the songs on all the discs in the disc changer in random order . Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF . When it's ON, "MRDM ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts. Magazine Random Play (Function of disc changer) Play all the s ...

  • Kenwood KDC-W4527G - page 20

    Attaching a title to a CD. 1 Play the disc you want to attach a name to 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode Press the [FM] or [AM] button. Select the "NAME SET" display . 4 Enter Name set mode Press the [ 4 ] or [ ¢ ] button for at least 2 seconds. 5 Move ...

  • Kenwood KDC-W4527G - page 21

    F .SEL SCAN AUD TI RDM REP M.RDM DISP MENU VOL ADJ OFF SCRL PTY L O U D EXTERNAL MEDIA CONTROL MENU SRC AM FM ¢ 4 Menu system Scrolling the displayed CD text, MP3/WMA text, or MD title. Press the [SCRL] button for at least 1 second. T ext/T itle Scroll — 21 — Menu display RDS indicator AUTO indicator KDC-W4527_U.S 03.11.13 2:06 PM Page 21 ...

  • Kenwood KDC-W4527G - page 22

    Synchronizing the RDS station time data and this unit's clock. Display Setting "SYNC ON" Synchronizes the time. "SYNC OFF" Adjust the time manually . It takes 3 to 4 minutes to synchronize the clock. Synchronize Clock This adjustment can be done when the <Synchronize Clock> (page 22) is set as OFF . 1 Select Clock Adj ...

  • Kenwood KDC-W4527G - page 23

    Only stations whose reception is good are searched for in auto seek tuning. Display Setting "LO.S OFF" The local seek function is OFF . "LO.S ON" The local seek function is ON. Local Seek <In T uner mode> • If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the firs ...

  • Kenwood KDC-W4527G - page 24

    Noise can be reduced when stereo broadcasts are received as monaural. Display Setting "MONO OFF" The monaural reception is OFF . "MONO ON" The monaural reception is ON. Monaural Reception <In FM reception> When the TI function is ON and poor reception conditions are experienced when listening to a traffic information stati ...

  • Kenwood KDC-W4527G - page 25

    Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power . Display Setting "OFF – – –" Power OFF T imer function is OFF . "OFF 20M" T urns the power OFF after 20 minutes. (Original setting) "OFF 40M" T urns the pow ...

  • Kenwood KDC-W4527G - page 26

    When there is a problem on playing a CD with special format, this setting play the CD by force. Display Setting "CD READ1" Play CD and MP3/WMA. "CD READ2" Play CD by force. Setting "CD READ2" cannot play MP3/WMA. Some music CDs may not be played back even in the "CD READ2" mode. CD Read Setting <In Standby ...

  • Kenwood KDC-W4527G - page 27

    — 27 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. ..........................................1 ..........................................2 ..........................................1 1 2 3 External view Number of items 1. T ...

  • Kenwood KDC-W4527G - page 28

    English — 28 — 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT REAR L R REMO.CONT Rear right output (Red) 4 10 Rear left output (White) Connector Function Guide Pin Numbers for ISO Connectors Cable Color Functions External Power Connector A–4 A–5 A–7 A–8 Speaker Connector B–1 B–2 B–3 B–4 B–5 B–6 B–7 B–8 Y ellow ...

  • Kenwood KDC-W4527G - page 29

    — 29 — — 29 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Metal mounting strap (commercially available) Self-tapping screw (commercially available) Firewall or m ...

  • Kenwood KDC-W4527G - page 30

    English — 30 — — 30 — ■ Removing the hard rubber frame 2 When the lower level is removed, remove the upper two locations. The frame can be removed from the top side in the same manner . Catch Lock 1 Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the fi ...

  • Kenwood KDC-W4527G - page 31

    — 31 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the ...

  • Kenwood KDC-W4527G - page 32

    — 32 — English Disc source ? " AUX EXT " is displayed without achieving External disc control mode. 50 ✔ Unsupported disc changer is connected. 51 ☞ Use the disc changer mentioned in the IMPORT ANT INFORMA TION of the section on <Safety precautions> (page 3). ? The specified disc does not play , but another one plays instead ...

  • Kenwood KDC-W4527G - page 33

    — 33 — HOLD: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. E0d ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playing again. NO NAME: Attempte ...

  • Kenwood KDC-W4527G - page 34

    English — 34 — FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................. 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) .............................. 1.6 µV/75 Ω Frequency response ( ± 3 dB) .................................30 Hz – 15 kHz Signa ...

  • Kenwood KDC-W4527G - page 35

    KDC-W4527_U.S 03.11.13 2:06 PM Page 35 ...

  • Kenwood KDC-W4527G - page 36

    KDC-W4527_Cover/E_r2.1 03.11.14 1:10 PM Page 36 ...

Manufacturer Kenwood Category CD Player

Documents that we receive from a manufacturer of a Kenwood KDC-W4527G can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-W4527G manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-W4527G
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-W4527G.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-W4527G, service manual, brief instructions and user manuals Kenwood KDC-W4527G. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-W4527G.

Similar manuals

A complete manual for the device Kenwood KDC-W4527G, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-W4527G by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-W4527G.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-W4527G - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-W4527G, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-W4527G, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-W4527G - which should help us in our first steps of using Kenwood KDC-W4527G
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-W4527G
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-W4527G in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-W4527G?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-W4527G, ask a question using the form below. If a user had a similar problem with Kenwood KDC-W4527G it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)