English dropdown-ico

Manual Supermicro MBD-X8DTU-F-O

89 pages Not applicable
Download

Go to site of 89

Summary
  • Supermicro MBD-X8DTU-F-O - page 1

    X8DTU X8DTU-F USER’S MANUAL Revision 1.1 ...

  • Supermicro MBD-X8DTU-F-O - page 2

    The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: F ...

  • Supermicro MBD-X8DTU-F-O - page 3

    Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X8DTU/ X8DTU-F motherboard. About This Motherboard The X8DTU/X8DTU-F supports the Intel 5500/5600 Series processors, the fi rst dual-processing platform that supports the In ...

  • Supermicro MBD-X8DTU-F-O - page 4

    X8DTU/X8DTU-F User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Co ...

  • Supermicro MBD-X8DTU-F-O - page 5

    Preface v Notes ...

  • Supermicro MBD-X8DTU-F-O - page 6

    vi X8DTU/X8DTU-F User's Manual T able of Contents Preface Chapter 1 Introduction 1-1 Overview ........................................................................................................ 1-1 Checklist .......................................................................................................... 1-1 X8DTU/X8DTU-F Quick R ...

  • Supermicro MBD-X8DTU-F-O - page 7

    T able of Contents vii Unit Identi fi er Switches ............................................................................. 2-17 3. Front Control Panel ................................................................................... 2-18 4. Front Control Panel Pin De fi nitions .......................................................... 2-1 ...

  • Supermicro MBD-X8DTU-F-O - page 8

    viii X8DTU/X8DTU-F User's Manual Before Power On ............................................................................................ 3-1 No Power ........................................................................................................ 3-1 No Video ........................................................................ ...

  • Supermicro MBD-X8DTU-F-O - page 9

    Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Check that the following items have a ...

  • Supermicro MBD-X8DTU-F-O - page 10

    1-2 X8DTU/X8DTU-F User's Manual X8DTU/X8DTU-F Image Note: The drawings and pictures shown in this manual were based on the latest PCB Revision available at the time of publishing of the manual. The motherboard you’ve received may or may not look exactly the same as the graphics shown in the manual. ...

  • Supermicro MBD-X8DTU-F-O - page 11

    Chapter 1: Introduction 1-3 X8DTU/X8DTU-F Motherboard Layout KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JT AG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x ...

  • Supermicro MBD-X8DTU-F-O - page 12

    1-4 X8DTU/X8DTU-F User's Manual X8DTU/X8DTU-F Quick Reference Notes: Jumpers not indicated are for test purposes only. 1. See Chapter 2 for detailed information on jumpers and connectors 2. " " indicates the location of Pin 1. 3. When LE1 LED is on, the onboard power connection is on. Make sure to 4. unplug the power cables before re ...

  • Supermicro MBD-X8DTU-F-O - page 13

    Chapter 1: Introduction 1-5 X8DTU/X8DTU-F Quick Reference Jumper Description Default Setting JBT1 CMOS Clear (See Chapter 2) JI 2 C1/JI 2 C2 SMB to PCI-Exp. Slots Off (Disabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1 LAN1/2 Enable Pins 1-2 (Enabled) JWD W atch Dog Pins 1-2 (Reset) Connector Description COM1/COM2 COM1/COM2 Serial Port/Header F AN 1 ...

  • Supermicro MBD-X8DTU-F-O - page 14

    1-6 X8DTU/X8DTU-F User's Manual Motherboard Features CPU T wo Intel • ® 5500/5600 Series (LGA 1366) processors; each processor supports two full-width Intel QuickPath Interconnect (QPI) links with a total of up to 51.2 GT/s Data T ransfer Rate (6.4 GT/s per direction) Memory T welve 240-pin DIMM sockets support up to 192 GB* of DDR3 Registe ...

  • Supermicro MBD-X8DTU-F-O - page 15

    Chapter 1: Introduction 1-7 Cha ssi s intr us ion d etec ti on • Sys tem re so urc e al er t via S upe ro D oc tor I II • ACPI Features Slow blinking LED for suspend state indicator • Mai n s wit ch o verrid e me chan ism • AC PI Po wer Ma na g em en t • K e y b oa r d W a k e u p f r o m S o ft -o ff • Onboard I/O Intel ICH10R supports ...

  • Supermicro MBD-X8DTU-F-O - page 16

    1-8 X8DTU/X8DTU-F User's Manual Block Diagram of the Intel 5520 Platform Note: This is a general block diagram. See the previous Motherboard Features pages for details on the features of each motherboard. PROCESSOR#0 PROCESSOR#1 QPI DDR3 DIMM C A B D E F DDR3 DIMM DDR3 DIMM DDR3 DIMM DDR3 DIMM DDR3 DIMM B C E F 3,4 BMC VGA ESI SATA 1 SATA SPI ...

  • Supermicro MBD-X8DTU-F-O - page 17

    Chapter 1: Introduction 1-9 1-2 Chipset Overview Bui lt up on th e fun ct io nali ty a nd t he c apab ili t y of the I ntel 5 520 p lat fo rm, t he X8 DTU/ X8 DTU - F m oth er bo ard p rov ide s th e per fo rm anc e an d feat ure s et req uire d fo r du al-p ro ces sor -b as ed hig h-end sy st ems wit h co n fi guration op timized for HPC/ Clu ste ...

  • Supermicro MBD-X8DTU-F-O - page 18

    1-10 X8DTU/X8DTU-F User's Manual 1-3 Special Features Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond when AC power is lost and then restored to the system. Y ou can choose for the system to remain powered off (in which case you must press the power switch to turn it back on) or for it to au ...

  • Supermicro MBD-X8DTU-F-O - page 19

    Chapter 1: Introduction 1-1 1 not if y t he u ser o f ce r t ain sy stem even ts. Fo r examp le, you c an a ls o co n fi gure S u p e r o Do c t o r t o p r o v i d e y o u w i t h wa rn in gs w h e n t h e s y s t em t e m p e r a t u r e, CP U temp er ature s, vol tag es an d fan s pee ds go b eyond a p re - d e fi ned range. 1-5 ACPI Features ...

  • Supermicro MBD-X8DTU-F-O - page 20

    1-12 X8DTU/X8DTU-F User's Manual installed on the motherboard, please connect the UIOP PWR connector to the power supply . It is strongly recommended that you use a high quality power supply that meets A TX power supply Speci fi cation 2.02 or above. It must also be SSI compliant (For more information, please refer to the web site at http://w ...

  • Supermicro MBD-X8DTU-F-O - page 21

    Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o prevent dam- age to your system board, it is important to handle it very carefully . The following measures are generally suf fi cient to protect your equipment from ESD. Precautions Use a grounded wr ...

  • Supermicro MBD-X8DTU-F-O - page 22

    2-2 X8DTU/X8DTU-F User's Manual X8DTU/-F Rev . 2.0 Locate the matching mounting holes on the chassis. Align the mounting holes 3. on the motherboard against the mounting holes on the chassis. Install standoffs in the chassis as needed. 4. Install the motherboard into the chassis carefully to avoid damage to mother- 5. board components. W arnin ...

  • Supermicro MBD-X8DTU-F-O - page 23

    Chapter 2: Installation 2-3 2-3 Processor and Heatsink Installation When handling the processor package, avoid placing direct pressure on the label area of the fan. Notes: Always connect the power cord last and always remove it before adding, re- 1. moving or changing any hardware components. Make sure that you install the processor into the CPU so ...

  • Supermicro MBD-X8DTU-F-O - page 24

    2-4 X8DTU/X8DTU-F User's Manual Socket Keys After removing the plastic cap, 1. using your thumb and the index fi nger , hold the CPU at the north and south center edges. Align the CPU key , the semi- 2. circle cutout, against the socket key , the notch below the gold color dot on the side of the socket. Once both the CPU and the 3. socket are ...

  • Supermicro MBD-X8DTU-F-O - page 25

    Chapter 2: Installation 2-5 Installing a CPU Heatsink Screw#1 Screw#2 Do not apply any thermal 1. grease to the heatsink or the CPU die because the required amount has already been ap- plied. Screw#1 Screw#2 Install Screw#1 Place the heatsink on top of the 2. CPU so that the four mounting holes are aligned with those on the retention mechanism. 3. ...

  • Supermicro MBD-X8DTU-F-O - page 26

    2-6 X8DTU/X8DTU-F User's Manual Removing the Heatsink War ni ng: We do not r ec om men d that t he CP U or th e heat sin k be re - m o v e d . H o w e v e r , i f y o u d o n e e d t o r e m o v e t h e h e a t s i n k , p l e a s e f o l l o w th e inst r uct io ns be low to u nins ta ll th e heat sin k and pr event dam age t o th e CPU o r o ...

  • Supermicro MBD-X8DTU-F-O - page 27

    Chapter 2: Installation 2-7 2-4 Memory Installation Note : Chec k the S upe r mic ro we b site fo r re co mme nde d me mor y mo dul es. CAUTI O N E x e r ci s e e xt r e m e ca r e w h e n i n s t a l l i n g o r r e m o v i n g D I M M mo dul es to p revent any po ss ibl e dam age. A ls o note t hat t he me mor y is i nter le aved to i mpr ove pe ...

  • Supermicro MBD-X8DTU-F-O - page 28

    2-8 X8DTU/X8DTU-F User's Manual Memory Support The X8DTU/X8DTU-F supports up to 192 GB* Registered ECC or up to 48 GB of Unbuffered ECC/Non-ECC DDR3 1333 MHz/1066 MHz/800 MHz in 12 DIMMs. (Refer to our website at www .supermicro.com for the recommended memory list. Memory Support for the Motherboard with the 5500 Processor(s) Installed RDIMM P ...

  • Supermicro MBD-X8DTU-F-O - page 29

    Chapter 2: Installation 2-9 1.5V UDIMM Population for the Motherboard w/5600 Processors Installed DIMM Slots per Channel DIMMs Populated per Channel DIMM T ype (Unb.= Unbuffered) Speeds (in MHz) Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank) 3 1 Unb. DDR3 ECC/Non-ECC 800,1066,1333 SR or DR 3 2 Unb. DDR3 ECC/Non-ECC 800 ...

  • Supermicro MBD-X8DTU-F-O - page 30

    2-10 X8DTU/X8DTU-F User's Manual Note: Notch should align with the receptive point on the slot Notch Release Tab Release Tab DIMM DDR3 Notch X8DTU/-F Rev. 2.0 To I n s t a l l : I ns er t m od ule ve r t ic al ly a nd pr es s do wn un til i t sn aps i nto p lac e. Pay at te nt ion t o th e ali gn men t not ch at the bo t tom . Installing and R ...

  • Supermicro MBD-X8DTU-F-O - page 31

    Chapter 2: Installation 2-1 1 X8DTU/-F Rev. 2.0 2-5 Control Panel Connectors/IO Ports Th e I/O p or ts a re c ol or c od ed in c o nfo rm anc e w ith t he P C 9 9 spe ci fi cati on . Se e th e pic tu re be low f or t he c ol or s and l oc at io ns of t he var io us I /O po r t s. 1. Back Panel Connectors/IO Ports Back Panel I/O Port Locations and ...

  • Supermicro MBD-X8DTU-F-O - page 32

    2-12 X8DTU/X8DTU-F User's Manual X8DTU/-F Rev. 2.0 1 2 A TX PS/2 Keyboard and PS/2 Mouse Ports The A TX PS/2 keyboard and PS/2 are located next to the Backpanel USB ports 0/1 on the motherboard. See the table at right for pin de fi ni- tions. PS/2 Keyboard/Mouse Pin De fi nitions PS2 Keyboard PS2 Mouse Pin# De fi nition Pin# De fi nition 1 ...

  • Supermicro MBD-X8DTU-F-O - page 33

    Chapter 2: Installation 2-13 X8DTU/-F Rev . 2.0 1 2 3 4 5 6 Universal Serial Bus (USB) Th ere a re ei ght U SB 2 .0 (U nive rs al Serial Bus ) connections on the mot he rb oa rd. Ba ck pan el US B Po r t s 0/1 are l oc ate d nex t to Keyboa rd / Mo us e Co nne ct or s. US B 2 / 3 ( J 1 1 ), US B 4/ 5 ( J 1 2), USB 6 (J 13 ) and U SB 7 ( J 14 ) ar e ...

  • Supermicro MBD-X8DTU-F-O - page 34

    2-14 X8DTU/X8DTU-F User's Manual X8DTU/-F Rev. 2.0 1 2 3 GLAN Ports Pin De fi nition Pin# De fi nition 9 P2V5SB 18 SGND 10 TD0+ 19 Act LED 1 1 TD0- 20 P3V3SB 12 TD1+ 21 Link 100 LED (Y ellow, +3V3SB) 13 TD1- 22 Link 1000 LED (Y ellow, +3V3SB) 14 TD2+ 23 Ground 15 TD2- 24 Ground 16 TD3+ 27 Ground 17 TD3- 28 Ground (NC: No Connection) 1. LAN 1 ...

  • Supermicro MBD-X8DTU-F-O - page 35

    Chapter 2: Installation 2-15 X8DTU/-F Rev. 2.0 1 2 Serial Ports T wo COM connections (COM1 & COM2) are located on the moth- erboard. COM1 is located next to the Video port on the Backplane IO panel. COM2 (JCOM2) is located next to the BMC Controller to provide front accessible serial connection. See the table on the right for pin de fi nitions ...

  • Supermicro MBD-X8DTU-F-O - page 36

    2-16 X8DTU/X8DTU-F User's Manual X8DTU/-F Rev. 2.0 1 VGA Connector A VGA connector is located next to COM Port1 on the IO backplane. This connector provides video and CRT display . Refer to the board layout below for the location. VGA/CRT Pin De fi nitions Pin# De fi nition Pin# De fi nition 1 Red 10 Ground 2 Green 1 1 MS0 3 Blue 12 MS1: SD ...

  • Supermicro MBD-X8DTU-F-O - page 37

    Chapter 2: Installation 2-17 X8DTU/-F Rev. 2.0 1 2 1. Rear UID Switch & LED 2. Front Control Panel 3. Front UID Switch 4. Front UID LED Unit Identi fi er Switches T wo Unit Identi fi er (UID) Switches and two LED Indicators are located on the mother- board. The Rear UID Switch (JUID) is located next to LAN 2 port on the backplane. The Front P ...

  • Supermicro MBD-X8DTU-F-O - page 38

    2-18 X8DTU/X8DTU-F User's Manual Po w e r Butto n 1 NIC1 (Link) L ED Re s e t Button 2 HDD LED FP PWR LED Res et PWR 3.3V ID_UID/3.3V SB Gr ound Gr ound 19 20 3.3 V Key Gr ound NMI PWR Fail LED NIC2 (Link) LED Blue+(OH/Fan Fail/PWR Fail/Blue_UID LED Red+(Blue LED_ Cathode_UID) NIC1 (Activity) L ED NIC2 (Activity) LED Key X8DTU/-F Rev. 2.0 3. F ...

  • Supermicro MBD-X8DTU-F-O - page 39

    Chapter 2: Installation 2-19 Po we r Butt o 1 NIC1 (Link) LE D Re set Butt o 2 HDD LED FP PWR LED Reset PWR 3.3V ID_UID/3.3V SB Gr ound Gr ound 19 20 3.3 V Key Grou nd NMI PWR Fail LED NIC2 (Link) LED Blue+(OH/Fan Fail/PWR Fail/Blue_UID LED Red+(Blue LED_ Cathode_UID) NIC1 (Activity) L E NIC2 (Activity) L E Key Power LED Th e Power LED c o nne ct i ...

  • Supermicro MBD-X8DTU-F-O - page 40

    2-20 X8DTU/X8DTU-F User's Manual Po we r Butto n 1 NIC1 (Link) L ED Re set Bu tto n 2 HDD LED FP PWR LED Reset PWR 3.3V ID_UID/3.3V SB Grou nd Gr ound 19 20 3.3 V Key Gr ound NMI PWR Fail LED NIC2 (Link) LED Blue+(OH/Fan Fail/PWR Fail/Blue_UID LED Red+(Blue LED_ Cathode_UID) NIC1 (Activity) LED NIC2 (Activity) LED Key X8DTU/-F Rev . 2.0 NIC1/N ...

  • Supermicro MBD-X8DTU-F-O - page 41

    Chapter 2: Installation 2-21 Po we r Butt o 1 NIC1 (Link) LE D Re set Butt o 2 HDD LED FP PWR LED Reset PWR 3.3V ID_UID/3.3V SB Gr ound Gr ound 19 20 3.3 V Key Grou nd NMI PWR Fail LED NIC2 (Link) LED Blue+(OH/Fan Fail/PWR Fail/Blue_UID LED Red+(Blue LED_ Cathode_UID) NIC1 (Activity) L E NIC2 (Activity) L E Key X8DTU/-F Rev . 2.0 A B A. OH/Fan Fail ...

  • Supermicro MBD-X8DTU-F-O - page 42

    2-22 X8DTU/X8DTU-F User's Manual X8DTU/-F Rev . 2.0 Po we r Butt o 1 NIC1 (Link) LED Rese t Butt o 2 HDD LED FP PWR LED Reset PWR 3.3V ID_UID/3.3V SB Gr ound Gr ound 19 20 3.3 V Key Gr ound NMI PWR Fail LED NIC2 (Link) LED Blue+(OH/Fan Fail/PWR Fail/Blue_UID LED Red+(Blue LED_ Cathode_UID) NIC1 (Activity) L E NIC2 (Activity) L E Key Power Butt ...

  • Supermicro MBD-X8DTU-F-O - page 43

    Chapter 2: Installation 2-23 KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 SXB3: PCI- ...

  • Supermicro MBD-X8DTU-F-O - page 44

    2-24 X8DTU/X8DTU-F User's Manual KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 S ...

  • Supermicro MBD-X8DTU-F-O - page 45

    Chapter 2: Installation 2-25 KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 SXB3: PCI- ...

  • Supermicro MBD-X8DTU-F-O - page 46

    2-26 X8DTU/X8DTU-F User's Manual KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 S ...

  • Supermicro MBD-X8DTU-F-O - page 47

    Chapter 2: Installation 2-27 KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 SXB3: PCI- ...

  • Supermicro MBD-X8DTU-F-O - page 48

    2-28 X8DTU/X8DTU-F User's Manual KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 S ...

  • Supermicro MBD-X8DTU-F-O - page 49

    Chapter 2: Installation 2-29 KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 SXB3: PCI- ...

  • Supermicro MBD-X8DTU-F-O - page 50

    2-30 X8DTU/X8DTU-F User's Manual KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 S ...

  • Supermicro MBD-X8DTU-F-O - page 51

    Chapter 2: Installation 2-31 IPMI_LAN (X8DTU-F) KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E ...

  • Supermicro MBD-X8DTU-F-O - page 52

    2-32 X8DTU/X8DTU-F User's Manual KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 S ...

  • Supermicro MBD-X8DTU-F-O - page 53

    Chapter 2: Installation 2-33 KB /MS Fan8 (CPU1Fan) IPMI LAN USB 0/1 COM1 PHY VGA LAN1 LAN2 LAN CTRL BMC CTRL BIOS COM2 USB6 USB7 USB4/5 JTAG Of CPLD JPI2C P1-DIMM3A P1-DIMM3B P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A P2-DIMM3B P2-DIMM3A LE2 JUIDB JPL1 J10 UIOP SXB2: PCI-E 2.0 x 8 SXB1: PCI-E 2.0 x 16 SXB3: PCI- ...

  • Supermicro MBD-X8DTU-F-O - page 54

    2-34 X8DTU/X8DTU-F User's Manual Notes ...

  • Supermicro MBD-X8DTU-F-O - page 55

    3-1 Chapter 3: T roubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘T echnical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter . ...

  • Supermicro MBD-X8DTU-F-O - page 56

    3-2 X8DTU/X8DTU-F User's Manual Use the speaker to determine if any beep codes exist. Refer to the Appendix 2. for details on beep codes. Losing the System’ s Setup Con fi guration Make sure that you are using a high quality power supply . A poor quality 1. power supply may cause the system to lose the CMOS setup information. Refer to Secti ...

  • Supermicro MBD-X8DTU-F-O - page 57

    3-3 Chapter 3: T roubleshooting users, so it is best to fi rst check with your distributor or reseller for troubleshooting services. They should know of any possible problem(s) with the speci fi c system con fi guration that was sold to you. Please go through the ‘T roubleshooting Procedures’ and 'Frequently Asked 1. Question' (F A ...

  • Supermicro MBD-X8DTU-F-O - page 58

    3-4 X8DTU/X8DTU-F User's Manual site. Select your motherboard model and download the BIOS fi le to your computer . Also, check the current BIOS revision and make sure that it is newer than your BIOS before downloading. Y ou can choose from the zip fi le and the .exe fi le. If you choose the zip BIOS fi le, please unzip the BIOS fi le onto ...

  • Supermicro MBD-X8DTU-F-O - page 59

    Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X8DTU/X8DTU-F . The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens. Starting BIOS Setup Utility T o enter the AMI BIOS Setup Ut ...

  • Supermicro MBD-X8DTU-F-O - page 60

    4-2 X8DTU/X8DTU-F User ’s Manual Starting the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility . From the main menu, you can access the other setup screens. An AMI BIOS identi fi cation ...

  • Supermicro MBD-X8DTU-F-O - page 61

    Chapter 4: AMI BIOS 4-3 AMI BIOS V ersion • : This item displays the BIOS revision used in your system. Build Date • : This item displays the date when this BIOS was complete. Processor The AMI BIOS will automatically display the status of the processor used in your system: CPU T ype • : This item displays the type of CPU used in the motherbo ...

  • Supermicro MBD-X8DTU-F-O - page 62

    4-4 X8DTU/X8DTU-F User ’s Manual 4-3 Advanced Setup Con fi gurations Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items:  Boot Features Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled and Disabled. Quiet Boot This o ...

  • Supermicro MBD-X8DTU-F-O - page 63

    Chapter 4: AMI BIOS 4-5 W ait For 'F1' If Error Th is fo rc es t he sys tem to wa it unt il th e ' F 1' key is pr es sed i f an e rr or o cc ur s. T he opt io ns ar e Dis ab led a nd Enable d . Hit 'Del' Message Display Th is feat ure d isp lays " Pre ss D EL to r un S etup" d ur ing P OST . The options are E ...

  • Supermicro MBD-X8DTU-F-O - page 64

    4-6 X8DTU/X8DTU-F User ’s Manual Hardware Prefetcher (A vailable when supported by the CPU) If set to Enabled, the hardware pre fetcher will pre fetch streams of data and instruc- tions from the main memory to the L2 cache in the forward or backward manner to improve CPU performance. The options are Disabled and Enabled . Adjacent Cache Line Pref ...

  • Supermicro MBD-X8DTU-F-O - page 65

    Chapter 4: AMI BIOS 4-7 C1E Support Select Enabled to use the feature of Enhanced Halt State. C1E signi fi cantly reduces the CPU's power consumption by reducing the CPU's clock cycle and voltage during a "Halt State." The options are Disabled and Enabled . Intel® C-ST A TE T ech If enabled, C-State is set by the system automa ...

  • Supermicro MBD-X8DTU-F-O - page 66

    4-8 X8DTU/X8DTU-F User ’s Manual QPI Links Speed This feature selects QPI's data transfer speed. The options are Slow-mode, and Full Speed . QPI Frequency This selects the desired QPI frequency . The options are Auto , 4.800 GT , 5.866GT , 6.400 GT . QPI L0s and L1 This enables the QPI power state to low power. L0s and L1 are automatically s ...

  • Supermicro MBD-X8DTU-F-O - page 67

    Chapter 4: AMI BIOS 4-9 Hysteresis Temperature (This feature is available when Closed Loop is enabled.) T emperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM temperature threshold is reached before Closed Loop Throttling begins. The options are Disabled , 1.5 o C, 3.0 o C, and 6.0 o C. Guardband T emperature (This f ...

  • Supermicro MBD-X8DTU-F-O - page 68

    4-10 X8DTU/X8DTU-F User ’s Manual providing the user with greater reliability , security and availability in networking and data-sharing. The options are Enabled and Disabled . SR-IOV Supported Select Enabled to enable Single Root I/O Virtualization (SR-IOV) support which works in conjunction with the Intel Virtualization T echnology and allow mu ...

  • Supermicro MBD-X8DTU-F-O - page 69

    Chapter 4: AMI BIOS 4-1 1 USB Functions This feature allows the user to decide the number of onboard USB ports to be en- abled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 Ports, 10 Ports and 12 USB ports . USB 2.0 Controller This item indicates if the onboard USB 2.0 controller is activated. The default set- ting is Enabled ...

  • Supermicro MBD-X8DTU-F-O - page 70

    4-12 X8DTU/X8DTU-F User ’s Manual SA T A AHCI (A vailable when the option-AHCI is selected.) Select Enable to enable the function of Serial A T A Advanced Host Interface. (T ake caution when using this function. This feature is for advanced program- mers only .) IDE Detect Timeout (sec) Use this feature to set the time-out value for the BIOS to d ...

  • Supermicro MBD-X8DTU-F-O - page 71

    Chapter 4: AMI BIOS 4-13 PCI-E Slot from SXB1/PCI-E Slot from SXB2/PCI-E Slot from SXB3 Se lec t Enab led t o enab le P CI - E SX B 1 slot , PCI - E SXB2 s lot o r PCI - E SXB 3 slot . It c an a lso e nab le O pti on RO Ms to boot computer using a network interface from these slots. (SXB1, a x16 slot, can be con fi gured into two x8 slots. SXB2, a ...

  • Supermicro MBD-X8DTU-F-O - page 72

    4-14 X8DTU/X8DTU-F User ’s Manual Serial Port Mode This feature allows the user to set the serial port mode for Console Redirection. The options are 1 15200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1. Flow Control This feature allows the user to set the fl ow control for Console Redirection. The options are None , Har ...

  • Supermicro MBD-X8DTU-F-O - page 73

    Chapter 4: AMI BIOS 4-15 The options are: The Early Alarm: Select this setting if you want the CPU overheat alarm (includ- • ing the LED and the buzzer) to be triggered as soon as the CPU temperature reaches the CPU overheat threshold as prede fi ned by the CPU manufacturer . The Default Alarm • : Select this setting if you want the CPU overhe ...

  • Supermicro MBD-X8DTU-F-O - page 74

    4-16 X8DTU/X8DTU-F User ’s Manual User intervention: No action is required. However , consider checking the CPU fans and the chassis ventilation for blockage. High – The processor is running hot. This is a ‘caution’ level since the CPU’ s ‘T em- perature T olerance’ has been reached (or has been exceeded) and may activate an overheat ...

  • Supermicro MBD-X8DTU-F-O - page 75

    Chapter 4: AMI BIOS 4-17 High Performance Event Timer Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing the de- pendency on other timestamp calculation devices, s ...

  • Supermicro MBD-X8DTU-F-O - page 76

    4-18 X8DTU/X8DTU-F User ’s Manual Status of BMC Working The Baseboard Management Controller (BMC) manages the interface between system management software and platform hardware. This item displays the status of the current BMC controller .  View BMC System Event Log Th is feat ure d isp lays th e BM C Sy stem Event Lo g (SEL). It shows the tot ...

  • Supermicro MBD-X8DTU-F-O - page 77

    Chapter 4: AMI BIOS 4-19  Set LAN Con fi guration Set this feature to con fi gure the IPMI LAN adapter with a network address as shown in the following graphics. Channel Number - Enter the channel number for the SET LAN Con fi g com- mand. This is initially set to [1] . Press "+" or "-" on your keyboard to change the Chann ...

  • Supermicro MBD-X8DTU-F-O - page 78

    4-20 X8DTU/X8DTU-F User ’s Manual  SET PEF Con fi guration PEF Support Select Enabled to enable the function of Platform Event Filter (PEF) which will interpret BMC events and perform actions based on pre-determined settings or 'traps' under IPMI 1.5 speci fi cations. Powering the system down or sending an alert when a triggering e ...

  • Supermicro MBD-X8DTU-F-O - page 79

    Chapter 4: AMI BIOS 4-21 BMC W atch Dog TimeOut [Min:Sec] This option appears if BMC W atch Dog T imer Action (above) is enabled. This is a timed delay in minutes or seconds, before a system power down or reset after an operating system failure is detected. The options are [5 Min] , [1 Min], [30 Sec], and [10 Sec].  DMI Event Log Con fi guratio ...

  • Supermicro MBD-X8DTU-F-O - page 80

    4-22 X8DTU/X8DTU-F User ’s Manual Supervisor Password This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password has not been used. User Password This item indicates if a user password has been entered for the system. " N ot In - st all ed" means t hat a u ser pass ...

  • Supermicro MBD-X8DTU-F-O - page 81

    Chapter 4: AMI BIOS 4-23 4-5 Boot Con fi guration Use this feature to con fi gure boot settings.  Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot Device. The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 5th boot device and Disabled. 1st Boot Device - [USB: X ...

  • Supermicro MBD-X8DTU-F-O - page 82

    4-24 X8DTU/X8DTU-F User ’s Manual 4-6 Exit Options Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system con fi guration changes, select this option to leave the BIOS Setup Utility and reboot the computer , so the new system con- fi guration param ...

  • Supermicro MBD-X8DTU-F-O - page 83

    A-1 Appendix A: BIOS POST Error Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal e ...

  • Supermicro MBD-X8DTU-F-O - page 84

    A-2 X8DTU/X8DTU-F User's Manual Notes ...

  • Supermicro MBD-X8DTU-F-O - page 85

    Appendix B: Software Installation Instructions B-1 Appendix B Software Installation Instructions B-1 Installing Software Programs After you've installed the Windows Operating System, a screen as shown below will appear . Y ou are ready to install software programs and drivers that have not yet been installed. T o install these software program ...

  • Supermicro MBD-X8DTU-F-O - page 86

    B-2 X8DTU/X8DTU-F User's Manual Supero Doctor III Interface Display Screen-I (Health Information) B-2 Con fi guring Supero Doctor III The Supero Doctor III program is a Web-based management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called the SD III Client. The Sup ...

  • Supermicro MBD-X8DTU-F-O - page 87

    Appendix B: Software Installation Instructions B-3 Supero Doctor III Interface Display Screen-II (Remote Control) Note : SD III S of t wa re Revi sio n 1 .0 c an be d own lo ade d fro m our We b site at : f tp:// f tp. supe r mic ro.c om /ut ilit y/ Supe ro _ D oc to r_I II/ . Y o u ca n als o download SDIII User's Guide at: http:/ /w w w .sup ...

  • Supermicro MBD-X8DTU-F-O - page 88

    B-4 X8DTU/X8DTU-F User's Manual Notes ...

  • Supermicro MBD-X8DTU-F-O - page 89

    (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signi fi cant injury ...

Manufacturer Supermicro Category Motherboard

Documents that we receive from a manufacturer of a Supermicro MBD-X8DTU-F-O can be divided into several groups. They are, among others:
- Supermicro technical drawings
- MBD-X8DTU-F-O manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro MBD-X8DTU-F-O
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro MBD-X8DTU-F-O.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro MBD-X8DTU-F-O, service manual, brief instructions and user manuals Supermicro MBD-X8DTU-F-O. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro MBD-X8DTU-F-O.

Similar manuals

A complete manual for the device Supermicro MBD-X8DTU-F-O, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro MBD-X8DTU-F-O by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro MBD-X8DTU-F-O.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro MBD-X8DTU-F-O - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro MBD-X8DTU-F-O, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro MBD-X8DTU-F-O, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro MBD-X8DTU-F-O - which should help us in our first steps of using Supermicro MBD-X8DTU-F-O
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro MBD-X8DTU-F-O
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro MBD-X8DTU-F-O in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro MBD-X8DTU-F-O?

Use the form below

If you did not solve your problem by using a manual Supermicro MBD-X8DTU-F-O, ask a question using the form below. If a user had a similar problem with Supermicro MBD-X8DTU-F-O it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)