English dropdown-ico

Manual Swann RedAlert/BlueAlert SW242-WDB

16 pages 0.86 mb
Download

Go to site of 16

Summary
  • Swann RedAlert/BlueAlert SW242-WDB - page 1

    RedAlert™ / BlueAlert™ If this device does not work when you first plug it in, do not take it back to the store. Contact the Swann Helpdesk using our fast e-mail service tech@swann.com.au or call us on one of the T oll-Free numbers shown on the back cover of this booklet. Most problems can be quickly and easily fixed with a simple e-mail or a q ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 2

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder T able of Contents 2 15 T able of Contents Package Contents RedAlert/BlueAlert Features Using the SD Card Slot Changing the Wireless Camera Channel on the DVR Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture) M ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 3

    3 14 T roubleshooting Wireless Camera Images Poor Picture : Realign antennas until image quality improves, slightly adjust the position of the Camera or Receiver . Change the location of the Camera, or use a different height or angle to see if the image improves. In some cases interference may be caused by another device on a similar frequency to t ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 4

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture) The RedAlert/BlueAlert DVR can display a wired and wireless camera in PIP mode. Note when viewing PIP only the main full screen image will be recorded. T o switch cameras and view PIP 1. Press the Displ ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 5

    3. Press OK to toggle Motion Detection ON or OFF . 4. Press Left/Right to highlight the desired option ( Delete One, Delete All, Format, Exit ) and then press OK to confirm the selection. 5. Press Left/Right to select Confirm (check) or Cancel (X) option, and then press OK to select. 4. Press the Left/Right buttons to highlight Exit and then press ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 6

    2. Press the Left/Right buttons to highlight Capture Format Photo/A VI (Video). 11. Press Left/Right to highlight the Exit option and then press OK to return menu interface. SHORTCUT : T o exit or go to previous menus press the Menu button on the DVR 3. T o delete an image, in playback mode press Menu to bring up the delete menu. Viewing and Deleti ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 7

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder TV Mode and Picture Quality Settings 1. Press the Menu button to enter menu interface. 2. Press Left/Right to highlight Setup and then press OK . 8. Press Left/Right in the Setup menu and highlight Motion Detect Sensitivity and press OK . 9. This screen shows the bo ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 8

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder Advanced Motion Detection Setup 1. From the Setup menu, press the Left/Right buttons to highlight Motion Detection Area and press OK . 2. Press Left/Right to change the size of the area of detection (Large, Medium or Small Box) and then press OK . Motion will be det ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 9

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder Advanced Motion Detection Setup 1. From the Setup menu, press the Left/Right buttons to highlight Motion Detection Area and press OK . 2. Press Left/Right to change the size of the area of detection (Large, Medium or Small Box) and then press OK . Motion will be det ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 10

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder TV Mode and Picture Quality Settings 1. Press the Menu button to enter menu interface. 2. Press Left/Right to highlight Setup and then press OK . 8. Press Left/Right in the Setup menu and highlight Motion Detect Sensitivity and press OK . 9. This screen shows the bo ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 11

    2. Press the Left/Right buttons to highlight Capture Format Photo/A VI (Video). 11. Press Left/Right to highlight the Exit option and then press OK to return menu interface. SHORTCUT : T o exit or go to previous menus press the Menu button on the DVR 3. T o delete an image, in playback mode press Menu to bring up the delete menu. Viewing and Deleti ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 12

    3. Press OK to toggle Motion Detection ON or OFF . 4. Press Left/Right to highlight the desired option ( Delete One, Delete All, Format, Exit ) and then press OK to confirm the selection. 5. Press Left/Right to select Confirm (check) or Cancel (X) option, and then press OK to select. 4. Press the Left/Right buttons to highlight Exit and then press ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 13

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture) The RedAlert/BlueAlert DVR can display a wired and wireless camera in PIP mode. Note when viewing PIP only the main full screen image will be recorded. T o switch cameras and view PIP 1. Press the Displ ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 14

    3 14 T roubleshooting Wireless Camera Images Poor Picture : Realign antennas until image quality improves, slightly adjust the position of the Camera or Receiver . Change the location of the Camera, or use a different height or angle to see if the image improves. In some cases interference may be caused by another device on a similar frequency to t ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 15

    RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder RedAlert/BlueAlert Digital Video Recorder T able of Contents 2 15 T able of Contents Package Contents RedAlert/BlueAlert Features Using the SD Card Slot Changing the Wireless Camera Channel on the DVR Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture) M ...

  • Swann RedAlert/BlueAlert SW242-WDB - page 16

    RedAlert™ / BlueAlert™ If this device does not work when you first plug it in, do not take it back to the store. Contact the Swann Helpdesk using our fast e-mail service tech@swann.com.au or call us on one of the T oll-Free numbers shown on the back cover of this booklet. Most problems can be quickly and easily fixed with a simple e-mail or a q ...

Manufacturer Swann Category Security Camera

Documents that we receive from a manufacturer of a Swann RedAlert/BlueAlert SW242-WDB can be divided into several groups. They are, among others:
- Swann technical drawings
- RedAlert/BlueAlert SW242-WDB manuals
- Swann product data sheets
- information booklets
- or energy labels Swann RedAlert/BlueAlert SW242-WDB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Swann RedAlert/BlueAlert SW242-WDB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Swann RedAlert/BlueAlert SW242-WDB, service manual, brief instructions and user manuals Swann RedAlert/BlueAlert SW242-WDB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Swann RedAlert/BlueAlert SW242-WDB.

Similar manuals

A complete manual for the device Swann RedAlert/BlueAlert SW242-WDB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Swann RedAlert/BlueAlert SW242-WDB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Swann RedAlert/BlueAlert SW242-WDB.

A complete Swann manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Swann RedAlert/BlueAlert SW242-WDB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Swann RedAlert/BlueAlert SW242-WDB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Swann RedAlert/BlueAlert SW242-WDB, that we can find in the current document
3. Tips how to use the basic functions of the device Swann RedAlert/BlueAlert SW242-WDB - which should help us in our first steps of using Swann RedAlert/BlueAlert SW242-WDB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Swann RedAlert/BlueAlert SW242-WDB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Swann RedAlert/BlueAlert SW242-WDB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Swann RedAlert/BlueAlert SW242-WDB?

Use the form below

If you did not solve your problem by using a manual Swann RedAlert/BlueAlert SW242-WDB, ask a question using the form below. If a user had a similar problem with Swann RedAlert/BlueAlert SW242-WDB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)