English dropdown-ico

Manual Transition Networks CSDTF1022-100

6 pages 0.4 mb
Download

Go to site of 6

Summary
  • Transition Networks CSDTF1022-100 - page 1

    COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR22/EN55022 Class A + EN55024 CE Mark FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equip ...

  • Transition Networks CSDTF1022-100 - page 2

    CSDTF10xx IN THE NETWORK NOTE: THE CSDTF10xx REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK. NOTE: T1/E1 MEDIA CONVERTERS MUST BE USED IN PAIRS. A TRANSITION Networks CSDTF10xx chassis media converter can be used with another CSDTF10xx chassis media converter, a SSDTF10xx stand-alone media converter, or with a previous ...

  • Transition Networks CSDTF1022-100 - page 3

    CABLE SPECIFICA TIONS (continued) T wisted-Pair Copper Cable Twisted pair connection requires two active pairs. The two active pairs in a T1/E1 network are pins 1 & 2 and pins 4 & 5. Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & white/orange) for the active pins. Category 3 or better twisted-pair cop ...

  • Transition Networks CSDTF1022-100 - page 4

    INST ALLA TION CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting switch and when installing Media Converter Slide-in- Module in the Media Conversion Center. Failure to observe this caution could result in damage to, and subsequent failure of, the Media Converter Slide-in- Module. Set Loopback T est Switch ...

  • Transition Networks CSDTF1022-100 - page 5

    F AUL T ISOLA TION and CORRECTION If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1. Is the P(o)W(e)R LED on the media converter illuminated? NO • Is the media converter inserted properly into the chassis? • Is the power cord properly insta ...

  • Transition Networks CSDTF1022-100 - page 6

    INST ALLA TION (continued) Install Slide-In-Module in PointSystem ™ Chassis CAUTION: Any Slide-in-Module installation slot in which a Media Converter Slide-in-Module is NOT installed MUST have a protective plate instead. Failure to observe this caution will void Class A and/or Class B compliance. NOTE: Install Media Converter Slide-in-Modules in ...

Manufacturer Transition Networks Category TV Converter Box

Documents that we receive from a manufacturer of a Transition Networks CSDTF1022-100 can be divided into several groups. They are, among others:
- Transition Networks technical drawings
- CSDTF1022-100 manuals
- Transition Networks product data sheets
- information booklets
- or energy labels Transition Networks CSDTF1022-100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Transition Networks CSDTF1022-100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Transition Networks CSDTF1022-100, service manual, brief instructions and user manuals Transition Networks CSDTF1022-100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Transition Networks CSDTF1022-100.

Similar manuals

A complete manual for the device Transition Networks CSDTF1022-100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Transition Networks CSDTF1022-100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Transition Networks CSDTF1022-100.

A complete Transition Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Transition Networks CSDTF1022-100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Transition Networks CSDTF1022-100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Transition Networks CSDTF1022-100, that we can find in the current document
3. Tips how to use the basic functions of the device Transition Networks CSDTF1022-100 - which should help us in our first steps of using Transition Networks CSDTF1022-100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Transition Networks CSDTF1022-100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Transition Networks CSDTF1022-100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Transition Networks CSDTF1022-100?

Use the form below

If you did not solve your problem by using a manual Transition Networks CSDTF1022-100, ask a question using the form below. If a user had a similar problem with Transition Networks CSDTF1022-100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)