Manual Planet Technology MGSW-2402

31 pages 0.62 mb
Download

Go to site of 31

Summary
  • Planet Technology MGSW-2402 - page 1

    10/100/1000Mbps Intelligent Ethernet Switch MGSW-2402 User’s Manaul ...

  • Planet Technology MGSW-2402 - page 2

    - 2 - Trademarks Copyright  PLANET Technology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLAN ET Technology Corp. All other trademarks belong to their respective owners. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to ...

  • Planet Technology MGSW-2402 - page 3

    - 3 - TABLE OF CONTENTS 1. INTROUCTION ................................................................................................................. ....................... 4 1.1 C HECKLIST ............................................................................................................................... 4 1.2 A BOUT THE S WIT CH .. ...

  • Planet Technology MGSW-2402 - page 4

    - 4 - 1. INTROUCTION 1.1 Checklist Check the contents of your package for following parts:  MGSW-2402.  User's manual CD.  Power cord.  19” rack mount kit.  RS-232 cable.  Quick Installation Guide. If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton including ...

  • Planet Technology MGSW-2402 - page 5

    - 5 -  Internal power supply  Auto MDI/ MDI-X on each port  Network management configuration: − Web-based management − Console and Telnet Configuration − SNMP network management − IEEE 802.1Q Tagging VLAN ( 256 VLAN Group ) − IEEE 802.1D Spanning Tree Protocol ( STP ) − Port Trunking supported − IGMP and Sniffer ( Port Mirror ...

  • Planet Technology MGSW-2402 - page 6

    - 6 - 2. HARDWARE DESCRIPTION This product series provide three differ ent running speed – 10Mbps, 100Mbps, and 1000Mbps in the same switch and automatically dist inguish the speed of incoming connection. This section describes the hardware features of these Switches. For easier management and control of the switch, familiarize yourself wi th its ...

  • Planet Technology MGSW-2402 - page 7

    - 7 - Power Notice: 1. The device is a power-required device, it means , it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime. 2. In some area, installing a surge suppression dev ice may ...

  • Planet Technology MGSW-2402 - page 8

    - 8 - 3.WEB-BASED MANAGEMENT This chapter describes how to manage the Swit ch through the at-hand browser like Internet Browser IE 4.0 or Netscape Communicator 4. x or above. Please check the JAVA applet is enabled in your browser’s option or preference. 3.1 Configuration The management function of this interface runs as an unsigned Java applet. ...

  • Planet Technology MGSW-2402 - page 9

    - 9 - Figure 3-1 : Password Screen The default user name and password is "root". After the password is entered you will see the main menu screen. Figure 3-2: The start up screen of MGSW-2402 Web Page 3.3 Home The Home page displays the configurati on of the MGSW-2402 Intelligent Switch. System Name An administratively -assigned name of th ...

  • Planet Technology MGSW-2402 - page 10

    - 10 - 3.4 Modules Modules page shows the modules that have inst alled into the MGSW-2402-Slot Intelligent Switch. There are fixed 24x 10/100 Base-TX ports in Module 0, and another 2 slot ( module 1 and module 2 ) are used for expansion. In t he following example, 1-port Gigabit 1000Base-SX ( LX ) Fiber Module, and 4-port 100Base-FX (ST) Fiber Modu ...

  • Planet Technology MGSW-2402 - page 11

    - 11 - 3.6 Statistics The Statistic page displays the detailed in formation about each port. You can compare and evaluate throughput or other port parameters. All screen data is updated automatically and you can also update the data manually. Figure 3-5 The Statistics Page 3.7 VLAN A VLAN ( Virtual LAN ) is a group of switch por ts designated by th ...

  • Planet Technology MGSW-2402 - page 12

    - 12 - Figure 3-6 The VLAN Page In the VLAN management window, you will see 2 VL ANs in the page. To select a certain VLAN, you can do the following: Press " >> " button to display the next two VLANs Press " << " button to display the previous two VLANs Press " >>| " button to display the last two VLA ...

  • Planet Technology MGSW-2402 - page 13

    - 13 - You can add, edit and remove port members of each trunk and then press " Apply " button after you have finished configur ing the trunks you need. ( Note: Make sure trunking ports are in the same VLAN group. ) 3.9 STP (Spanning Tree Protocol) Spanning tree is a link management protocol t hat provides path redundancy while preventing ...

  • Planet Technology MGSW-2402 - page 14

    - 14 - 3.10 Port Security Port Security allows you to restrict specific MAC addresses to reside in some port. For example, a dummy hub is attached to some port for extens ion, and you just only allow 2 users to access this port at the same time, you can use the port security window to set the parameters. Figure 3-9. The Port Security page To restri ...

  • Planet Technology MGSW-2402 - page 15

    - 15 - Figure 3-10. Port Priority – 802.1p page Programmable Mapping of 802.1p to Internal Priority The received packets with 802.1q tag are assi gned priority according to a flexible and programmable mapping of the 802.1p user-priority tag (3 bits, value from 0 to 7) to the internal priority queue. The default is to assign a packet to high prior ...

  • Planet Technology MGSW-2402 - page 16

    - 16 - 3.13 IGMP Multicasting is used to support r eal-time applications such as video conferencing or streaming audio. IGMP ( Internet Group Management Protocol ) allow you to query for any attached hosts who want to receive a specific multicast serv ice. The switch looks up the IP Multicast Group used for this service and adds any port which re c ...

  • Planet Technology MGSW-2402 - page 17

    - 17 - Static addresses are manually entered in to the Static Address Table. 1. Enter the MAC address in the MAC Addre ss field (ex. 00-00-00-00-00-01) and VLAN ID (default is 1) 2. Select the Module and Port you want to asso ciate with this entry with from the Port drop-down box. 3. Click <<Add…<<. 4. Press “ Apply “ button. Once ...

  • Planet Technology MGSW-2402 - page 18

    - 18 - 3-15 The Port Mirroring page If you want to monitor all receive and transmit packets of one port. You can do the following: Choose the monitored port in " Mirror Source Port " choice box in the corresponding mirror source module. Only one port can be monitored in one module at the same time. Choose the corresponding target module, ...

  • Planet Technology MGSW-2402 - page 19

    - 19 - Enter the same password in "Password" and "Confirm Password" edit box Press the "Apply" button You should reboot system to let your settings take effect if you have changed one of the IP address, subnet mask and default gateway. 3.18 SNMP You can manage the Switch using third-party’s SNMP ( Simple Network Mana ...

  • Planet Technology MGSW-2402 - page 20

    - 20 - Figure 3-18 Save & Reboot page 3.20 Upgrade You can on-line upgrade the firmware of the managed unit. The following steps is needed to upgrade the firmware: Use HTTP or FTP to download the new ve rsion firmware from our website. Enter password in the "Password" edit box. Enter the file downloaded in the "File Path" ed ...

  • Planet Technology MGSW-2402 - page 21

    - 21 - ...

  • Planet Technology MGSW-2402 - page 22

    - 22 - 4 CONSOLE INTERFACE 4.1 CONNECT TO PC RS-232 serial cable Prepare a RS-232 serial cable. Attach the 9- pin female connector to the male connector on the switch. Plug the other side of this cable to your PC. Hyper Terminal In Windows 95/98/2000/XP,launch “HyperTermi nal”, create a new connection, and adjust settings as below: 4.2 Main Men ...

  • Planet Technology MGSW-2402 - page 23

    - 23 - Figure 4-1 The Main Menu of Console Management 4.2.1. Device settings This menu contains system parameters to disp lay and configure the switch to your network. Menu items are: ● Version (RO): display the firmware version of MGSW-2402 ● MAC Address (RO): display the MAC Address of MGSW-2402 ● System Up Time (RO): display the work time ...

  • Planet Technology MGSW-2402 - page 24

    - 24 - • Speed/Duplex: allow set Auto- negotiation,100Mbps-f ull/half duplex,10Mbps-full/half duplex • Flow Control: allow enable or disable flow control on each port • Back Pressure: allow enable or disable Back Pressure on each port • VLAN Tagged: allow enable or disable VLAN Tagged on each port • Default VLAN ID: allow set VLAN ID 1~40 ...

  • Planet Technology MGSW-2402 - page 25

    - 25 - Figure 4-5: Spanning Tree 4.2.5 Broadcast Storm Filter This menu contains three items to enabl e or disable Broadcast Storm Filter: ● Enable ● Disable ● Quit Figure 4-6: Broadcast Storm Filter 4.2.6. IGMP This menu contains three items to enable or disable IGMP: ● Enable ● Disable ● Quit Figure 4-7: IGMP ...

  • Planet Technology MGSW-2402 - page 26

    - 26 - 4.2.7. VLAN Mode (2 modes) This menu contains two items for 2 VLAN mode selection: ● VLAN is valid for all packets Disable ● VLAN is valid for broadcast and multic ast packets, not for unicast packets. ● Quit Figure 4-8: VLAN Mode( 2 modes) 4.2.8. VLAN for CPU (2 VLANs) This menu contains two items for 2 VLANs for CPU: ● Current firs ...

  • Planet Technology MGSW-2402 - page 27

    - 27 - 4.2.9.1 Secure IP for Telnet : disable allow any PC login in MGSW-2402 by Telnet , enable allow the PC of secure IP login in MGSW-2402. 4.2.9.2 Secure IP for HTTP : disable allow any PC login in MGSW-2402 by H TTP, enable allow PC of secure IP login in MGSW-2402. 4.2.9.3 Secure IP 1.2.3.4 : allow to set 4 Secure IP address of 4 PCs Figure 4- ...

  • Planet Technology MGSW-2402 - page 28

    - 28 - Figure 4-12: Factory Default Settings & Reboot System 4.2.12 Reboot System This menu provide reboot the Switch Figure 4-13: Reboot System 4.2.13 Quit T HIS MENU PROVIDE LOGOUT OUT THE S WITCH Figure 4-14: Quit ...

  • Planet Technology MGSW-2402 - page 29

    - 29 - 5 SOFTWARE UPGRADE PROCEDURE The application software is field upgradable. The upgrade procedure and the required equipment is described in the following section. Note that once the system is up, it is contro lled by an executing application image residing in the flash memory. No software upgrade is possible during this mode. The upgrade can ...

  • Planet Technology MGSW-2402 - page 30

    - 30 - APPENDIX A NETWORKING CONNECTION When attaching an end-station to the device, a standard straight-through CAT5 cable may be used, even when the end-station is attached via a patch panel. However, when attaching another switch or attaching workstations via hubs, a crosso ver cable will need to be used. Please see the following wire diagrams f ...

  • Planet Technology MGSW-2402 - page 31

    - 31 - APPENDIX B TECHNICAL SPECIFICATIONS Standard IEEE802.3, IEEE802.3u, IEEE802. 3z, IEEE802.3ab,IEEE802.1Q,IEEE802.1d Interface RJ-45 10/100M Ethernet Port 24 - front RS232 Male connector 1 - front Slide-in Slot 2 - front Indicator PWR LED 1 per unit Diag LED 1 per unit Port LEDs 100M 1 per port LNK/ACT 1 per port FDX/COL 1 per port Power Input ...

Manufacturer Planet Technology Category Switch

Documents that we receive from a manufacturer of a Planet Technology MGSW-2402 can be divided into several groups. They are, among others:
- Planet Technology technical drawings
- MGSW-2402 manuals
- Planet Technology product data sheets
- information booklets
- or energy labels Planet Technology MGSW-2402
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planet Technology MGSW-2402.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planet Technology MGSW-2402, service manual, brief instructions and user manuals Planet Technology MGSW-2402. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planet Technology MGSW-2402.

A complete manual for the device Planet Technology MGSW-2402, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planet Technology MGSW-2402 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planet Technology MGSW-2402.

A complete Planet Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planet Technology MGSW-2402 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planet Technology MGSW-2402, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planet Technology MGSW-2402, that we can find in the current document
3. Tips how to use the basic functions of the device Planet Technology MGSW-2402 - which should help us in our first steps of using Planet Technology MGSW-2402
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planet Technology MGSW-2402
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planet Technology MGSW-2402 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planet Technology MGSW-2402?

Use the form below

If you did not solve your problem by using a manual Planet Technology MGSW-2402, ask a question using the form below. If a user had a similar problem with Planet Technology MGSW-2402 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)