Manual Life Fitness Strength 8215

21 pages 1.32 mb
Download

Go to site of 21

Summary
  • Life Fitness Strength 8215 - page 1

    8215 MULTI-PRES S Part # 6875601 Revision:3/17/00 1 ASSEMB L Y INSTRUCTIONS ...

  • Life Fitness Strength 8215 - page 2

    IMPORTANT NOTES Please note: Tools Required for Assembly * Thank you for purchasing the LIFE FITNESS 8215 MULTI-PRESS. Please read these instruc- tions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. 2 NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD O ...

  • Life Fitness Strength 8215 - page 3

    3 PARTS LIST PART # 6795203 6784303 6755602 6755903 6878202 6783403 6781303 6784703 6784103 6624302 6624203 6651602 6780304 6780004 6791102 6214501 6284501 6714601 3116101 6782301 6784601 6382301 3108002 3109602 3118401 6757701 3203501 3103302 3202105 KE Y 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 QT Y 1 1 1 1 1 ...

  • Life Fitness Strength 8215 - page 4

    4 STEP 1: FIGURE 1 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • LOOSELY assemble LOWER SUPPORT (6) to the TOWER (1) and PRESS FRAME (2) using four 1/2 X 4 ” BOLTS (31), four 1/2 ” WASHERS (41), and three 1/2 ” LOCK NUTS (43). See FIGURE 1. • LOOSELY assemble UPPER SUPPORT (8) to the TOWER (1) and PRESS FRAME (2) using four 1/2 X 3 ” BOLTS (32 ...

  • Life Fitness Strength 8215 - page 5

    STEP 2: FIGURE 2 5 • SECURE LY assemble one 3/8 ” SPRING PIN (48) to the WOLFF SLEEVE (3) as shown in FIGURE 2. (IMPORTANT! Tighten nut of SPRING PIN completely.) • Attach one U-PIN (50) to the WOLFF SLEEVE (3) using one 1/2 ” P AL NUT (24). Slide one 4 ” VINYL CAP (25) onto the U-PIN (50) as shown in FIGURE 2. • Pull back on SPRING PIN ...

  • Life Fitness Strength 8215 - page 6

    STEP 3: FIGURE 3 6 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECURE LY assemble the PRESS FRAME (9) to the PRESS BASE (2) using one 1/2 X 3 ” BOLT (32), two 1/2” WASHERS (41), and one 1/2 ” LOCK NUT (43), as well as two 3/8 X 3 ” FL AT HEAD BOLTS (36), one 1/4 X 8” PLATE (56), two 3/8” WASHERS (42), and two 3/8 ” LOCK NUTS (45) as show ...

  • Life Fitness Strength 8215 - page 7

    7 STEP 4: FIGURE 4 • Slide two HINGE TABS (46) onto the WOLFF SLEEVE (3) and SECUREL Y assemble SE AT PAD (14) using two 3/8 X 1-1/4 ” BO LTS (39), and two 3/8 ” W ASHERS (42). See FIGURE 4. (NOTE: Please note the HINGE TAB direction.) 39 3/8 X 1-1/4 ” 3 46 14 42 ...

  • Life Fitness Strength 8215 - page 8

    STEP 5: 8 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Slide the RIGHT BACK PAD ANGLE (10) and the LEFT BACK PAD ANGLE (11) onto the shaft on the WOLFF SLEEVE (3) as shown in FIGURE 5. • Assemble the 1/2 X 2 X 15-1/2 ” PLATES (12) to the RIGHT BACK PAD ANGLE (10) and the LEFT BACK PAD ANGLE (11) using two 1/2 X 1-1/4 ” BOLTS (33), two 1/2 ” WAS ...

  • Life Fitness Strength 8215 - page 9

    FIGURE 6 9 • SECURELY assemble the BACK PAD (13) to the LEFT & RIGHT BACK PAD ANGLES (11 & 10) using four 3/8 X 1-1/4 ” BO LTS (39) and four 3/8 ” W ASHERS (42). See FIGURE 6. STEP 6: 39 3/8 X 1-1/4 ” 13 10 42 11 ...

  • Life Fitness Strength 8215 - page 10

    FIGURE 7 10 • Slide two PILLOW BLOCKS (27) over the shaft on the PRESS ARM ADJUST (5) and SECURELY assemble the two PILLOW BLOCKS (27) to the UPPER SUPPORT (8) using four 3/8 X 3-1/4 ” BOLTS (35), four 3/8 ” WASHERS (42), and four 3/8 ” LOCK NUTS (45) as shown in FIGURE 7. STEP 7: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Center PRESS ARM AD ...

  • Life Fitness Strength 8215 - page 11

    FIGURE 8 11 • SECURELY assemble one 1/2 ” SPRING PIN (47) to the PRESS ARM (4) as shown in FIGURE 8. (IMPORTANT! Tighten spring pin completely.) STEP 8: 29 1/2 X 7-1/2 ” 4 5 44 1/2 ” LOW HEIGHT 47 • SECURELY assemble the PRESS ARM (4) to the PRESS ARM ADJUST (5) using one 1/2 X 7-1/2 ” BOLT (29), two 1/2 ” WASHERS (41), and one 1/2 ? ...

  • Life Fitness Strength 8215 - page 12

    12 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 9 STEP 9: • Snap two WEIGHT PLATE BUSHINGS (22) into the top side of all twenty WEIGHT PLATES (16) as shown in FIGURE 9. 22 16 ...

  • Life Fitness Strength 8215 - page 13

    FIGURE 10 13 • Insert the two GUIDE RODS (20) into the base of the TOWER (1) as shown in FIGURE 10. Lubricate the GUIDE RODS with a slicon or teflon spray that is available at most hardware stores. • Slide two WEIGHT STACK CUSHIONS (23) down over the GUIDE RODS (20). See FIGURE 10. • Using EXTREME CARE slide twenty WEIGHT PLATES (16) down ove ...

  • Life Fitness Strength 8215 - page 14

    14 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 11 FIGURE 12 STEP 11: • SECURELY assemble two 4-1/2 ” PULLEYS (19) to the TOWER BRACE (7) using two 3/8 X 2 ” BOLTS (38), and two 3/8 ” LOCK NUTS (45). See FIGURE 11. • Place TOWER BRACE (7) over the GUIDE RODS (20) and SECURELY assemble TOWER BRACE (7) to the TOWER (1) using two 1/2 X 4 ” ...

  • Life Fitness Strength 8215 - page 15

    FIGURE 13 15 STEP 13: • Wrap the CABLE (21) around one 4-1/2 ” PULLEY (19) and SECURELY assemble the pulley to the REAR slot of the PRESS ARM ADJUST (5) using one 3/8 X 2-3/4 ” BO LT (37), two 3/8 ” FLANGE SPACERS (52), and one 3/8 ” LOCK NUT (45) as shown in FIGURE 13. (NOTE: Loop the cable over the pulley prior to inserting it into the ...

  • Life Fitness Strength 8215 - page 16

    FIGURE 14 16 STEP 14: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Route the threaded end of the CABLE (21) through the large hole in the PRESS FRAME (9) as shown in FIGURE 14. • Wrap the CABLE (21) around one 4-1/2 ” PULLEY (19) and SECURE LY assemble the 4-1/2 ” PULLEY (19) to the vertical pulley bracket on the PRESS FRAME (2) using two 3/8 X 2 ...

  • Life Fitness Strength 8215 - page 17

    FIGURE 15 17 STEP 15: • Wrap the CABLE (21) around one 4-1/2 ” PULLEY (19) and SECURELY assemble the 4-1/2 ” PULLEY (19) to the horizontal pulley bracket on the PRESS FRAME (2) using one 3/8 X 2 ” BOLT (38), one 2-7/8 ” CABLE CLIP (26), and one 3/8 ” LOCK NUT (45) as shown in FIGURE 15. (NOTE: Before tightening, make sure CABLE CLIP (26 ...

  • Life Fitness Strength 8215 - page 18

    FIGURE 16 18 STEP 16: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • Wrap the CABLE (21) around one 4-1/2 ” PULLEY (19) and SECURE LY assemble the 4-1/2 ” PULLEY (19) to the vertical pulley bracket on the LOWER SUPPORT (6) using two 3/8 X 2 ” BO LTS (38) and two 3/8 ” LOCK NUTS (45) as shown in FIGURE 16. (NOTE: Make sure CABLE (21) runs over the ...

  • Life Fitness Strength 8215 - page 19

    19 FIGURE 17 STEP 17: • Screw the treaded end of the CABLE (21) approximately 3/4 ” into the end of the WEIGHT STACK SHAFT (17) and tighten jam nut securely. See FIGURE 17. • If the HEAD PL ATE (18) does not sit on top of the first WEIGHT PL ATE (16), push the head plate down, insert the SELECTOR PIN (49) and perform several repetitions on th ...

  • Life Fitness Strength 8215 - page 20

    STEP 18: • Slide the SHROUD (15) between the TOWER (1) as shown in FIGURE 18. FIGURE 18 20 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 15 1 ...

  • Life Fitness Strength 8215 - page 21

    21 FIGURE 19 STEP 19: 1 15 Thank you for purchasing the LifeFitness 8215 MU LTI-PRESS. If unsure of proper use of equipment, call your local LifeFitness distributor or call the LifeFitness customer service department at (800) 328-9714. • SECURELY assemble the SHROUD (15) to the TOWER (1) using four 3/8 X 1 ” BUTTON HEAD CAP SCREWS (40) as shown ...

Manufacturer Life Fitness Category Home Gym

Documents that we receive from a manufacturer of a Life Fitness Strength 8215 can be divided into several groups. They are, among others:
- Life Fitness technical drawings
- Strength 8215 manuals
- Life Fitness product data sheets
- information booklets
- or energy labels Life Fitness Strength 8215
All of them are important, but the most important information from the point of view of use of the device are in the user manual Life Fitness Strength 8215.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Life Fitness Strength 8215, service manual, brief instructions and user manuals Life Fitness Strength 8215. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Life Fitness Strength 8215.

A complete manual for the device Life Fitness Strength 8215, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Life Fitness Strength 8215 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Life Fitness Strength 8215.

A complete Life Fitness manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Life Fitness Strength 8215 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Life Fitness Strength 8215, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Life Fitness Strength 8215, that we can find in the current document
3. Tips how to use the basic functions of the device Life Fitness Strength 8215 - which should help us in our first steps of using Life Fitness Strength 8215
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Life Fitness Strength 8215
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Life Fitness Strength 8215 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Life Fitness Strength 8215?

Use the form below

If you did not solve your problem by using a manual Life Fitness Strength 8215, ask a question using the form below. If a user had a similar problem with Life Fitness Strength 8215 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)