English dropdown-ico

Manual Tripp Lite SmartPro Datacenter INT

8 pages 0.29 mb
Download

Go to site of 8

Summary
  • Tripp Lite SmartPro Datacenter INT - page 1

    1 Copyright ©2000 Tripp Lite. All rights reserved. SmartPro ® is a registered trademark of Tripp Lite. Quic k Installation: p. 3 - 4 Basic Operation: p. 5 - 7 Storage & Service: p. 8 Specifications: p. 8 Safety: p. 2 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Owner's Manual Smar tPr o ® ...

  • Tripp Lite SmartPro Datacenter INT - page 2

    2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperature between 0° C and 40° ...

  • Tripp Lite SmartPro Datacenter INT - page 3

    3 Quick Installation P osition y our External Battery Pack(s). • If positioning multiple Battery Packs, place them side by side or stack them no more than three high. P osition y our P ower Module. • The Module may be stacked on top of your Battery Packs or placed beside them. Plug your External Battery Pack into y our P o wer Module's Ext ...

  • Tripp Lite SmartPro Datacenter INT - page 4

    4 DB9 P or t Connection –Optional–* Using the grey or tan Tripp Lite cable that came with your UPS, connect your primary server’s DB9 port to the single DB9 port labeled “LAN 4.1” or "Smart LAN Primary" (which provides complete intelligent RS-232 communications).** If you have additional computers: Connect them to the DB9 ports ...

  • Tripp Lite SmartPro Datacenter INT - page 5

    5 Basic Operation Switches System Switch (Middle Back Panel) This switch activates the UPS's battery charger and intelligent microprocessor. ALWAYS leave it in the “ENABLE” (RIGHT) position when your UPS is plugged in. Only set the switch to “DISABLE” (LEFT) to reduce battery drain when you unplug your UPS for storage or shipping. Note ...

  • Tripp Lite SmartPro Datacenter INT - page 6

    6 Indicator Lights Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. This green light will shine constantly to indicate AC power is available at the receptacles. It will flash to indicate AC power is not available. (See “System Enable Switch” and “On/Standby Switch” descriptions above.) This multi-colored li ...

  • Tripp Lite SmartPro Datacenter INT - page 7

    7 Other UPS Features AC Receptacles (Rear Panel) These 230V IEC-320 receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect your equipment against damaging surges and line noise. You can remotely reboot connected equipment by turning receptacles OFF ...

  • Tripp Lite SmartPro Datacenter INT - page 8

    8 Storage & Service Storage Turn your UPS OFF: first engage the ON/Standby Switch and release it to place your UPS in the “Standby” mode, then move the System Enable Switch to the “DISABLE” (DOWN) position to prevent battery drain, then disconnect the UPS power cord from the wall outlet. If you plan on storing your UPS for an extended p ...

Manufacturer Tripp Lite Category Power Supply

Documents that we receive from a manufacturer of a Tripp Lite SmartPro Datacenter INT can be divided into several groups. They are, among others:
- Tripp Lite technical drawings
- SmartPro Datacenter INT manuals
- Tripp Lite product data sheets
- information booklets
- or energy labels Tripp Lite SmartPro Datacenter INT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tripp Lite SmartPro Datacenter INT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tripp Lite SmartPro Datacenter INT, service manual, brief instructions and user manuals Tripp Lite SmartPro Datacenter INT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tripp Lite SmartPro Datacenter INT.

Similar manuals

A complete manual for the device Tripp Lite SmartPro Datacenter INT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tripp Lite SmartPro Datacenter INT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tripp Lite SmartPro Datacenter INT.

A complete Tripp Lite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tripp Lite SmartPro Datacenter INT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tripp Lite SmartPro Datacenter INT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tripp Lite SmartPro Datacenter INT, that we can find in the current document
3. Tips how to use the basic functions of the device Tripp Lite SmartPro Datacenter INT - which should help us in our first steps of using Tripp Lite SmartPro Datacenter INT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tripp Lite SmartPro Datacenter INT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tripp Lite SmartPro Datacenter INT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tripp Lite SmartPro Datacenter INT?

Use the form below

If you did not solve your problem by using a manual Tripp Lite SmartPro Datacenter INT, ask a question using the form below. If a user had a similar problem with Tripp Lite SmartPro Datacenter INT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)