English dropdown-ico

Manual Nilfisk-ALTO E 140.1

19 pages 2.91 mb
Download

Go to site of 19

Summary
  • Nilfisk-ALTO E 140.1 - page 1

    User Manual EN Nilfi sk-AL T O E 130.1, E 140.1 24-01-2006 ...

  • Nilfisk-ALTO E 140.1 - page 2

    Printed in China Copyright © 2006 Nilfisk-AL T O ...

  • Nilfisk-ALTO E 140.1 - page 3

    3 EN Inde x 1 Safety precautions and w ar nings .............................................3 2 Description ............................................................................... 4 3 Before y ou star t using your pressure washer ........................... 5 4 Operating your pressure w ashe ............................................... ...

  • Nilfisk-ALTO E 140.1 - page 4

    4 EN Extension cables should be of a watertight constr uction and comply with the below-men- tioned requirements for length and cable dimensions. 1.0 mm² max. 12.5 m 1.5 mm² max. 20 m 2.5 mm² max. 30 m  Cable connections should be kept dry and off the ground. Mains power connection The follo wing should be ob- served when connecting the high ...

  • Nilfisk-ALTO E 140.1 - page 5

    5 EN 3 Bef ore y ou star t using y our pressure washer 3.1 Mounting of trolle y handle (models with trolley handle) 1. Remove the label on top of machine. 2. Push down the trolley handle (12) into the machine. Secure the handle by tightening the 2 screws. 3. Mount the hose hook (14) on the handle (3 screws). Note: the hose hook can be mounted on th ...

  • Nilfisk-ALTO E 140.1 - page 6

    6 EN 4 Operating y our pressure washer 4.1 Connection of high pressure hose (models without hose reel) 1. Mount the high pressure hose on the outlet (3). 4.2 Mounting of spray lance and Click & Clean nozzles  1. Push the spray lance (6) into the spra y gun (7) and screw it on. Note: The spra y lance (6) has a built-in low pressure nozzle tha ...

  • Nilfisk-ALTO E 140.1 - page 7

    7 EN 4.3 W ater connection 4.4 Start and stop of the ma- chine (when connected to a water supply) The spra y lance is affected by a thrust during operation - therefore alw ays hold it fi rmly with both hands. IMPORT ANT : P oint the nozzle at the ground. 1. Check that the machine is in upright position. NO TE: Do not place the machine in high gras ...

  • Nilfisk-ALTO E 140.1 - page 8

    8 EN 4.5 Start the machine (when connected to open con- tainers (suction mode)) The washer can take in w ater from a rain water tank as an example . The hose f or the wa- ter supply must not be too long, approx. 5 m. Make sure that the water tank is not placed on a lower le vel than the machine. 1. Place the other end of the water hose in the water ...

  • Nilfisk-ALTO E 140.1 - page 9

    9 EN 5 Fields of application and w orking methods 5.1 General Effi cient high presure cleaning is achie ved by f ollowing a f ew guide- lines, combined with your o wn personal experience of specifi c cleaning tasks. Accessories and detergents, when correctly cho- sen, can increase the effi ciency of y our pressure washer . Here is some basic inf ...

  • Nilfisk-ALTO E 140.1 - page 10

    10 EN 5.2 T ypical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure w asher from Nilfi sk-AL T O in association with accessories and detergents. T ask Accessories ‘Click & Clean’ Cleaning method Car Car nozzle, auto brush, underchassis nozzle , Foam spr ayer , Car Comb ...

  • Nilfisk-ALTO E 140.1 - page 11

    11 EN  6 After using y our pressure washer 6.2 Winding up of electric cable and high pressure hose T o av oid accidents, the electric cable and the high pressure hose should alwa ys be winded carefully up. 1. Wind up the electric cable on the appropriate hooks. The high pressure washer comes in two models: A) with hook for stor age of high pres- ...

  • Nilfisk-ALTO E 140.1 - page 12

    12 EN W ARNING! Alwa ys disconnect the electrical plug from the sock et pr ior to maintenance or cleaning. T o ensure a long and problem free working life , please take the follo wing advice:  Wash out water hose , high pressure hose, spra y lance and accessories before mounting.  Clean the connectors of dust and sand.  Make sure that no s ...

  • Nilfisk-ALTO E 140.1 - page 13

    13 EN 7.1 Cleaning of water inlet fi lter Clean the water inlet fi lter regularly once a month or more frequently according to use. Carefully loosen the fi lter with a pair of pliers and clean it. Check that it is intact before re-mount- ing it. The inlet fi lter must alw ays be fi tted inside the w ater inlet pipe to fi lter out sand, limest ...

  • Nilfisk-ALTO E 140.1 - page 14

    14 EN 8 T r ouble-shooting T o av oid unnecessar y disappointments, you should chec k the following bef ore contacting the Nilfi sk- AL TO service organization: Symptom Cause Recommended action Machine refuses to start Machine not plugged in Plug in machine. Defectiv e socket T ry another socket. Fuse has blown Replace fuse. Switch off other machi ...

  • Nilfisk-ALTO E 140.1 - page 15

    15 EN 9 Fur ther inf ormation 9.1 Recycling the washer Make the old cleaner un usable immediately . 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste. As specifi ed in European Direc- tive 2002/96/EC on old electri- cal and electronic appliances, used electrical goods must be collected se ...

  • Nilfisk-ALTO E 140.1 - page 16

    16 EN 9.3 Accessories Only use original accessories. Click & Clean Car nozzle Special nozzle for enameled surf aces. Optimal distance: 30 - 50 cm. Click & Clean Undershassis nozzle 90° angled special nozzle for undercarriage and wheel arches. Integrated guide shoes. Click & Clean Multiangle adaptor Adjusted in angles from 0° - 90° fo ...

  • Nilfisk-ALTO E 140.1 - page 17

    17 EN EU Declaration of Conf ormity Product: High Pressure Washer T ype: Nilfi sk-AL T O E 130.1, E 140.1 Description: 230 V 1~, 50 Hz - IP X5 The design of the unit corres- ponds to the following pertinent regulations: EC Machine Directive 98/37/EC EC Low-v oltage Directive 73/23/EEC EC EMV Directive 89/336/EEC Applied harmonised standards: EN 60 ...

  • Nilfisk-ALTO E 140.1 - page 18

     ...

  • Nilfisk-ALTO E 140.1 - page 19

    126487135 http://www .nilfi sk-alto .com FRANCE Nilfi sk-AL TO AL TO Fr ance SAS Aéroparc 1 19 rue Icare 67960 Entzheim T el.: +33 3 88 28 84 00 F ax: +33 3 88 30 05 00 E-mail: info@nilfi sk-alto .fr www .nilfi sk-alto.com GERMANY Nilfi sk-AL TO Division of Nilfi sk-Adv ance AG Guido-Oberdorfer-Strasse 10 89287 Bellenberg T el.: +49 0180 5 3 ...

Manufacturer Nilfisk-ALTO Category Pressure Washer

Documents that we receive from a manufacturer of a Nilfisk-ALTO E 140.1 can be divided into several groups. They are, among others:
- Nilfisk-ALTO technical drawings
- E 140.1 manuals
- Nilfisk-ALTO product data sheets
- information booklets
- or energy labels Nilfisk-ALTO E 140.1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nilfisk-ALTO E 140.1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nilfisk-ALTO E 140.1, service manual, brief instructions and user manuals Nilfisk-ALTO E 140.1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nilfisk-ALTO E 140.1.

Similar manuals

A complete manual for the device Nilfisk-ALTO E 140.1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nilfisk-ALTO E 140.1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nilfisk-ALTO E 140.1.

A complete Nilfisk-ALTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nilfisk-ALTO E 140.1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nilfisk-ALTO E 140.1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nilfisk-ALTO E 140.1, that we can find in the current document
3. Tips how to use the basic functions of the device Nilfisk-ALTO E 140.1 - which should help us in our first steps of using Nilfisk-ALTO E 140.1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nilfisk-ALTO E 140.1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nilfisk-ALTO E 140.1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nilfisk-ALTO E 140.1?

Use the form below

If you did not solve your problem by using a manual Nilfisk-ALTO E 140.1, ask a question using the form below. If a user had a similar problem with Nilfisk-ALTO E 140.1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)