English dropdown-ico

Manual Matsushita CF-08TX1A1M

87 pages 4.8 mb
Download

Go to site of 87

Summary
  • Matsushita CF-08TX1A1M - page 1

    ORDER NO. CPD0606050C1 Wireless Display CF-08TX1A1M This is the Service Manual for the follow ing areas. M …for U.S.A. © 2006 Matsushita Electric Industrial C o., Ltd. All rights reserv ed. Una uth oriz ed c opyin g a nd d ist ribut ion is a vi olati on ...

  • Matsushita CF-08TX1A1M - page 2

    1 ...

  • Matsushita CF-08TX1A1M - page 3

    2 ...

  • Matsushita CF-08TX1A1M - page 4

    Precautions Care should be exercised with regard to the follo wing in order to avoid the possibility of overheating, fire or damage. Battery Pack A void Heat Do not throw the battery pack into a fire or expose it to excessive heat. Keep Articles A way Do not place the battery pack togethe r with arti- cles such as necklaces or hairpins when carry- ...

  • Matsushita CF-08TX1A1M - page 5

    Do not touch the terminal s on the battery pack. The battery pack may no longer function prop erly if the contact s are dirty or d amaged. Do not expose the battery pack to water , or allow it to become wet. If the battery pack will not be used for a long period of time (a month or more), cha rge or discharg e (use) the battery pack until the remai ...

  • Matsushita CF-08TX1A1M - page 6

    CONTEN TS 1. S pec ifications ·················································································································· 1- 1 2. Intro ducti on ·································· ...

  • Matsushita CF-08TX1A1M - page 7

    Main Specifications Model No. CF-08TX1A1M CPU Intel ® PXA270 Processor 312 MHz Memory (ROM/RAM) 32 MB (Fl ash) /64 MB Display Method 10.4 XGA type Internal LCD Display 65,536 colors (1024 × 768 pixels) W i r e less LAN B u i lt- i n Blu e t o oth B u i lt- i n LAN IEEE 802.3 10Base-T , IEEE 802.3u 100Base-TX Sound W A VE playback, Monaural speake ...

  • Matsushita CF-08TX1A1M - page 8

    *1 This slot does not support the MultiMedia card. Operation has been confirmed for Panas onic SD Memo ry Cards with up to 2 GB capacity . *2 Theoretical value and not the actual speed. The transfer rate does not become higher even if you use a card tha t supports the higher transfer rate. *3 <Only for North America> The AC adaptor is compati ...

  • Matsushita CF-08TX1A1M - page 9

    2 Introduction Copyright This manual is copyrighted by Matsushita Electric Indu strial Co., Ltd. with a ll rights reserved. No p art of this manual may be r eproduced in any form with out the prior written permission of Mat sushit a Electric Industrial Co., Lt d. No patent liability is assumed with respec t to the use of the information contained h ...

  • Matsushita CF-08TX1A1M - page 10

    3 Description of parts A. LCD (T ouchscreen) B. Wireless LAN antenna C. Bluetooth anten na D. Power st atus E. Power button F . Batter y st atus G. D C - I N j a c k H. LAN port I. Cursor control button J. Keyboard b utton K. USB port L. USER button M. SD Memory Card slot N. SD Memory Card st atus A. Battery cover latch B. Hand strap Adjust the len ...

  • Matsushita CF-08TX1A1M - page 11

    The tether can be att ached to the upper r ight or upper lef t corner of the di splay . It prevents the pen (included) from falling accident ally . Att aching the T ether Using the T ethe r 1 3 2 4 3 - 2 ...

  • Matsushita CF-08TX1A1M - page 12

    4 Starting up/Shutting Down St arting Up 1 T urn on the wireless display . When you log on as a Super visor When you log on as a User Press the power b utton with the USER button pressed. • If you do not do so, even when you set enter the Supervisor Password, the wireless display will run in the User operating environment. Press the power button. ...

  • Matsushita CF-08TX1A1M - page 13

    A. Auto Launch B. W a it for Network Connection • When the Su pervisor does not add the check mark for [Allow Change Auto Launch] in the [User] ta b of the [Security Set- tings (Supervisor)] screen, [Auto Launch] and [W ait for Network Connection] cannot be set here. C. Password T o set the p a ssword • If a User Password has been set in the [U ...

  • Matsushita CF-08TX1A1M - page 14

    When returning the wireless displa y to its condition at the time of shipment Perform the following pr ocedure while the wire less display is turned off. A Co n n e c t y o ur wi r eless display to a pow e r outl e t. B Press the power button with t he keyboard button and USER button p r essed until the message “Reset t he device to factory defau ...

  • Matsushita CF-08TX1A1M - page 15

    OCCURRENCE OF TROUBLE END OF REPAIR WORK Self Test Program NORMAL FINISH ERROR OCCURRENCE TROUBLESHOOTING DISASSEMBLY PROCEDURE Replace defective parts. Self Test Program After repair, make sure that the repaired set operates properly. TEST OK DEFECTIVE PARTS SORTING REPAIR WORK INSPECTION OK FAULT Insert the AC plug. Press the Power button, while ...

  • Matsushita CF-08TX1A1M - page 16

    5.2. Troubleshooting Please t ake n ote of the follow ing two p oint s w ith rega rd to t roubles hooting: 1. Know-h ow of diagnosis u pon o ccurrence of heavy t roubles, e.g. ‘Set cannot be turn ed ON’, ‘ Set f ails to start’ , ‘No di splay o n screen’, etc . 2. Expla nation of ea ch troub le, mainly sympto m of troubl e in opera tion. ...

  • Matsushita CF-08TX1A1M - page 17

    5.3. Self Test Program 1. Introduction This description explains Self- Test Program of this Test. 2. How to Start-up (1) Connect the AC adapto r. ( Unless you connect the AC adapto r, the Self- Test Program does not start. ) (2) Connect the AC adapto r. Press the USER button and Cursor Control button at the same time, then press the Power button to ...

  • Matsushita CF-08TX1A1M - page 18

    5-4 3.1.3. Test register check for the source microcompute r. Check the test register of the source microcomputer 3.1.4. ID check for 2700G Confirm the ID of 2700 G. 3.1.5. Chip ID check for LAN9 118 Check the test register and chip ID of LAN9 118. 3.1.6. Card detection pin check and tuple information check for PCMCIA When you cannot obtain the tup ...

  • Matsushita CF-08TX1A1M - page 19

    If the results of all items are OK, the following display appears. *** SELF TEST *** CPU Type : OK SDRAM March Test : OK Embedded Controller : OK 2700G : OK LAN9 118 : OK PCMCI A : OK Overall Result : OK If only the PCMCI A result is N G , the following display appears. *** SELF TEST *** CPU Type : OK SDRAM March Test : OK Embedded Controller : OK ...

  • Matsushita CF-08TX1A1M - page 20

    6 Troubleshooting Follow the instr uctions below whe n a problem has occur red. For a sof tware pr ob- lem, refer to the sof tware’ s instructio n manual. If the problem persist s, cont act your technical support of fice. St arting Up Display T ouchscreen Cannot sta rt up. The power ind ica- tor or battery indica- tor is not lit. Connect the AC a ...

  • Matsushita CF-08TX1A1M - page 21

    Shut Down Sound Wireless Communication Connecting Peripherals Cannot shut down. Press the power button for fo ur seconds or longer to shut down the wireless display . No sound. Confirm the volume for [Qu ick Menu] or [V olume & Sounds] in Control Panel. Unable to hear sound in stereo. Playback conditions vary depending on the server . • If yo ...

  • Matsushita CF-08TX1A1M - page 22

    7 Block Diagram Intel PXA270 C5 Bulverde Micropro cessor I/O 1.8V 13MHz-312MHz ,Core 0.85-1.3V CF-08 Block Diagram Crystal 13.000MHz 32.786KHz AC97 I/F Power-MG I2C I/F AC97 Codec with Touch screen controller WM9712 (Wolfson) Touch Screen on LCD Panel Mic/Amp/Speaker Serial(BT) Serial(FF ) Cradle I/F Mobile DiskOnChip (1Chip) 64MB/128MB SDRAM (2Chi ...

  • Matsushita CF-08TX1A1M - page 23

    AC Adapter (16V/2.5A) FET Voltage Detector & OVP# Main DC/DC LDO (MAX1586) VA3 VCC_CORE(0.8-1.3V) VA3 Charger (LTC40 08) NTC FET Battery 5200mAh 7.4V Voltage Regulator 3.4V Sub Battery Connector PWR_EN SYS_EN VCC_SRAM(1.1V) VCC_PLL(1.3V) Voltage Detector R ACIN VCC_USIM(3.0V) VCC_IO(3.3V) VCC_MEM(1.8V) VCC_BATT(3.3V) BKBT(VBK3) FET Voltage Dete ...

  • Matsushita CF-08TX1A1M - page 24

    8 Wiring Connection Diagram USB PCB IO POWER PCB SW LED PCB MAIN PCB DOCK CON PCB WLAN PCB AUDIO CON PCB LCD Connector by Cable Direct connection by Connectors Parts on Bottom Side SPEAKER ANTENNA PCB R BATTERY PACK INVERTER Microphone Headphone DC-IN USB LAN SD CARD SLOT EXPANSION BUS ANTENNA PCB L CN6 CN7 CN401 CN400 CN500 CN302 CN301 CN300 SW502 ...

  • Matsushita CF-08TX1A1M - page 25

    9-1 9 Disassemb ly/R eassembly Note: Power off the c omputer . Do not shut down to the Suspend o r hibernatio n mode. Do not add peripherals w hile the com puter is i n the Susp end or hib ernation mode ; abnormal operation may result. 9.1. Disassembly Inst ructions 9.1.1. Pr ep ara tion Be sure to make th e follow ing prep ara tions before disass ...

  • Matsushita CF-08TX1A1M - page 26

    9-2 3. Remove the 12 Screw s <N6 >. 4. Remov e the Cable Ho ld Sheet while ope ning the Rear Cabinet ASS'Y slowl y . 5. Remove the Ca ble ho oked on t he Lam p Cable S p ring. 6. Remove both the Inverter an d the I nverter Case. 7. Remove the Conn ector (CN6) co nnect ed to the IO Power PCB. 8. Open the Rear Cabine t. 9. Remov e the Clam ...

  • Matsushita CF-08TX1A1M - page 27

    9-3 9.1.6. Removing th e WLAN PC B 1. Remove the two Antenna Cables . 2. Remove the four Sc rews <N1> . 3. Remove the La mp Cab le S pring. 4. Remove the WLAN PCB. Screws <N1>:XSB2+4F NL 9.1.7. Removing the Audio Con PCB 1. Disconnect the Ca ble fro m the Co nnect or (CN30 0). 2. Remove the Edge Sh eet. 3. Remove the two Scre ws <N1& ...

  • Matsushita CF-08TX1A1M - page 28

    9-4 9.1.10. Removing the WLAN L PCB 1. Remove the Ins ulation She et. 2. Remove the Screw <N7>. 3. Remove both the Ante nna Cab le and the WL AN L PCB. Screw <N7>:DFHE5025 XA 9.1.1 1. Removing the Bluetooth WLAN R PCB 1. Remove the t wo ta pes. 2. Remove the Screw <N7>. 3. Remov e both the Antenna Cabl e and the Blu etooth WLAN R ...

  • Matsushita CF-08TX1A1M - page 29

    9-5 9.1.14. Removing the LCD Unit and t he Inverter 1. Disconnect the Ca ble fro m the I nverter Connec tor . 2. Remove the Inve rter wi th the I nverter C ase. 3. Remove the Pet T ape. 4. Remove the TS Noise T ap e. 5. Remove the Cab le from th e Cla mper . 6. Remove the LCD Unit. Pet T ape Inverter Case Inverter LCD Unit Inverter Connector TS Noi ...

  • Matsushita CF-08TX1A1M - page 30

    9-6 9.2. Reassembly Instructi ons 9.2.1. A ttention whe n CF-0 8 series is rep aired • Please ex ecute writing BI OS ID w hen you e xchange the M ain Boa rd. • Parts (She et and rubber) e tc. relate d vario us the Con ductiv e Cloth and Hea t S preader cannot b e recy cled. U se new p arts . 9.2.2. S etting the LC D Unit and th e Invert er 1. A ...

  • Matsushita CF-08TX1A1M - page 31

    9-7 ■ Prep aration s for back light LCD Prism Sheet LCD Prism Sheet LCD Prism Sheet LCD Panel Frame LCD Panel Frame T ape Holder Sheet Holder Sheet 1 A 0~0.5mm 0~0.5mm 0~0.5mm Insert into the inside the ribs. (4 places in total) wide side Remove the protection films. (both sides) For appearance standard information of the LCD process, refer to th ...

  • Matsushita CF-08TX1A1M - page 32

    9-8 ■ Assembly o f the LCD LCD Refrection Sheet Holder Sheet Holder Sheet LCD Refrection Sheet LCD Refrection Sheet Prism Sheet LIGT GUIDE PANEL LCD FRAME 0~0.5mm Insert after attaching 1. Make the silver side inside. Insert into the inside the ribs. (4 places in total) T o avoid deflection, do not attach 2 too close to the Frame. Positional Rela ...

  • Matsushita CF-08TX1A1M - page 33

    9-9 LCD PWB Sheet Refrect T ape Pet T ape 1 CN 0~0.5mm Standard attaching position of 1 Match to the PWC outline. Run over the end of the CN metal (0.5 to 1 mm) Parts for electricity removing work Press the Sheet along the edge of the Reflector (Avoid floating.). Attach here. Lengthwise: Match to the top end of the Reflector . Crosswise: Match to t ...

  • Matsushita CF-08TX1A1M - page 34

    9-10 ■ Prep arati ons for T ouchscreen ■ Asse mbly of th e T ou chsc reen Front Case Assy TS T ape Attachment Standard Attachment Standard Attachment Standard TOUCH SCREEN ASSY TOUCH SCREEN ASSY Protect Sheet TS FPC Spacer T ouch Screen LCD Side Cushion T5 LCD Side Cushion T2 LCD Side Cushion T5 TS Spacer A LCD Side Cushion T8 LCD Side Cushion ...

  • Matsushita CF-08TX1A1M - page 35

    9-1 1 ■ Assembly of the LCD Block 9.2.3. Setting the SW LED P CB 1. Connec t the Ca ble to the con necto r (CN501) o f the SW LED PCB. 2. Attac h the tape. 3. Fix the SW LED PCB and SW Board S topper Plate usin g three Screws <N2> . No1 to No3 4. Put the Cable in to the Clampe r . Note: T ighten the Scre ws in t he number ed orde r (No1 to ...

  • Matsushita CF-08TX1A1M - page 36

    9-12 ■ Assembly o f the SW LED PCB LED Lens SW Rubber Power Button Power Button Sheet SW Board T ape SW Board Stopper Plate Screw-2 Screw-3 Screw-1 T ape Scroll Button Sheet Scroll Button User Button 1~2mm 0~1mm Attach. Asymmetric shape Ensure it is attached in the notch. in FPC direction Place the stiffening plate downward. After attaching FPC, ...

  • Matsushita CF-08TX1A1M - page 37

    9-13 9.2.4. Setting the Dock Con PCB 1. Fix the Doc king PCB Sheet, the Bas e Joint Cover and the Dock Con PC B using f ive Screws <N3>. No1 to No5 2. Connec t the two C ables to th e two con nectors (CN600, CN601) of the Dock Con PCB. 3. Attac h the FFC Hold Cush ion. Note: T ighten the Scre ws in the numbered order (No1 t o No5 ). Screws &l ...

  • Matsushita CF-08TX1A1M - page 38

    9-14 ■ Assembly of the DOCK CON PCB Base Joint Cover Docking PCB Sheet FFC Hold Cushion Cradle Relay Card FFC (Docking Card) Busterade Screw-4 Screw-3 Screw-5 Screw-1 Screw-2 Caption T ape 0~1mm 10+1mm Ensure the direction is right. Attach to the top side of CN. Attach. Docking PCB side Attach the Hook firmly.Ensure the Connector Terminals of the ...

  • Matsushita CF-08TX1A1M - page 39

    9-15 9.2.5. Setting the Bluetooth WLAN R PCB 1. Fix the Antenna Ca ble and the Bluetooth WLAN R PCB using on e Screw <N7 >. 2. Fix the Antenna C able s with t he two t apes . Screw <N7> :DFHE5025XA 9.2.6. Setting the WLAN L PCB 1. Fix th e Antenna C able an d the W LAN L PC B using on e Screw <N7>. 2. Fix the Antenna C able w ith ...

  • Matsushita CF-08TX1A1M - page 40

    9-16 9.2.7. S etting the U SB PCB 1. Fix the USB Hold Plate and the USB PCB using two Screws <N1>. 2. Attach the Edg e Sheet. Screws <N1>:XSB2+4 FNL 9.2.8. S etting t he S peake r 1. Attach the S peaker . 2. Fix the S peaker Hold S heet usin g two Scre ws <K 1-1-2>. Screws <K1-1-2>: XSB2+4FNL 9.2.9. Setting the Audio Con PCB ...

  • Matsushita CF-08TX1A1M - page 41

    9-17 9.2. 10. Setti ng the W LAN PCB 1. Fix the WLAN PCB and the lamp Ca ble S pring usin g four Screws <N1>. 2. Fix the two Antenna Cables . Screws <N1>:XSB2+4F NL 9.2. 1 1 . S etti ng th e IO Pow er P CB 1. Fix th e IO Power PCB u sin g eigh t Sc rews <N1> . No 1 to No8 2. Connec t the Ca ble to the Co nnecto r (CN8) of the IO P ...

  • Matsushita CF-08TX1A1M - page 42

    9-18 9.2.12. Set ting the M ain PCB 1. Connect the Ca ble to the Conn ector (CN7 ) of the Main PCB. 2. Fix the Main PCB using four Scre ws <N1>. No1 t o No4 3. Connect the Ca bles to th e six C onnectors (CN3,CN4,CN9,CN10,CN12,CN13) of the Main PCB. Note: T ighte n the Screw s in the numbered order (No1 to No4). Screws <N1>:XSB2+4 FNL & ...

  • Matsushita CF-08TX1A1M - page 43

    9-19 ■ Assembly of the USB PCB, Audio Con PCB, WLAN PCB, I O Power PCB, and Main PCB Lamp Cable Spring Edge Sheet WLAN PCB BA TT CN Cover Sheet Audio Con PCB Screw x2 Screw x4 Screw x8 4 1 2 3 5 3 2 4 6 1 7 8 a b IO Power PCB Screw x4 1~2mm 1~2mm Hook on the boss and tighten together with the Board. (Fix the short hand of the Hook.) Direction; le ...

  • Matsushita CF-08TX1A1M - page 44

    9-20 Shield T ape BT FFC Edge Sheet Shield T ape FFC (Wireless Card) FFC (Wireless Card) Busterade Edge Sheet T ape T ape Power Cable FFC(Audio Card) FFC(Audio Card) A a b c Shield T ape 0~1mm 1~3mm 1~3mm 0~0.5mm 0~0.5mm 1 0.5mm * Paste Sheets firmly . 20~30N(2.0~3.0Kgf) *Note Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf) Attachment Standard ...

  • Matsushita CF-08TX1A1M - page 45

    9-21 9.2.13. Setting the Display Unit 1. Conn ect the C ables to th e conn ectors (CN 2, CN6) of th e Main PCB. 2. Put the two Cable s into the Clampe r . 3. Connec t the Inverte r Cable to t he con nector (CN6 ) of the Pow er PCB as clo sin g the Re ar Ca binet . 4. Attach both th e Inve rter Case and the Inver ter . 5. Hook the Cable on the lamp ...

  • Matsushita CF-08TX1A1M - page 46

    9-22 8. Fix the Rear Ca se ASS'Y usi ng 12 Sc rews <N6>. No1 to No12 9. Fix the Antenna Cove r R using t wo Screw s <N4>. 10. Fix the Antenna Cove r L using two Screw s <N4> . Note: T ighte n the Screw s in the numbered order (No1 to No12 ). Screws <N4>:D XSB2+6FNL Screws <N6>:D XYN26+J6FNL ■ Assembly o f the Di ...

  • Matsushita CF-08TX1A1M - page 47

    9-23 Cable Hold Sheet A A B *Note Ensure the Cable does not run over the Cushions (a,b,c). Note Avoid any stress on the transformer and the coil. Insert the cushions on the both sides with the "Caution to High Voltage" label facing front until they reach the bottom while matching the cushions to the A boss and the rib..(Top of the A boss ...

  • Matsushita CF-08TX1A1M - page 48

    9-24 9.2.14. Set ting the Bat tery Pa ck 1. Open the hand strap cov er . 2. Re move th e hand strap. 3. Sl ide th e Bat tery c over l atc h. 4. Open and remo ve the Battery cove r . 5. F irmly attach the ba tter y pack t o the c onnec tor . 6. Fit the battery co ver , and then clos e the b attery cover . 7. Slide the batte ry cover latch. 8. Attac ...

  • Matsushita CF-08TX1A1M - page 49

    9-25 ■ Assembl y of the Ba ttery Pack Pen Battery Cover Assy Battery Pack Coa Label(Win Ce) Information Label Model Label Serial Label 10~15mm Important Parts for Safety Important Parts for Safety guide to match the end –2 mm Allowable displacement: max. 1 mm *Reuse the bag used on delivery. Do not remove through the whole process. Slide the kn ...

  • Matsushita CF-08TX1A1M - page 50

    9-26 Screw Screw Hand Strap Ensure the direction is right. The side with fewer stitches is placed on the surface. Turn the metal clasp on both sides to the inside. Slide the knob to the outside and lock firmly. ...

  • Matsushita CF-08TX1A1M - page 51

    CF-08TX1A1M 10 Exploded V iew N7 N7 N7 N3 N3 K8 K51 K53 E6 K42 K29 K45 E14 E16 E16 K26 K9 K10 K10 K43 K50 K18 K20 K19 K22 K7 K28 K48 K6 K5 K21 K16 E7 N7 N7 N6 N6 N6 N6 N6 N6 N6 N6 N6 N6 N7 N7 N3 N3 E8 N7 E5 E17 K15 K49 K12 N4 E2 E1 K24 K36 K46 E9 E4 K15 K15 K3 K44 K1 1 K39 N1 N1 N1 N1 N4 N1 E1 1 K1 1 N1 N1 N1 E18 N1 N1 N1 N1 N1 N1 K35 K23 K52 E15 K ...

  • Matsushita CF-08TX1A1M - page 52

    CF-08TX1A1M K1 K1-1-7 K1-1-5 K1-1-13 K1-1-1 K1-1-4 K1-1-6 K1-1-3 K1-1-12 K1-9 K1-2 K1-6 K1-3 K1-10 K1-3 K1-6 K1-3 K1-7 K1-7 K1-8 K1-7 K1-8 K1-1-12 K1-1-14 K1-1-1 1 K1-1-9 K1-1-10 K1-1-8 K1-1-2 K1-1 K1-5 K1-4 Capton tape (10 25) Capton tape (10 25) Screw tightening torque 0.2 _ 0.02N m (2.0 _ 0.2kgf cm) A + + A 1 0-2 ...

  • Matsushita CF-08TX1A1M - page 53

    CF-08TX1A1M A A K200 K31 K33 E3 K17 K30 K2 N2 N2 K32 K200-4 K200-3 K200-3 K200-6 K200-4 K200-1 K200-4 K200-3 K200-2 K200-2-1 K11 K14 E19 E19-1-1 E19-2 E19-1-2 E20 K201 E19-3 E19-1-3 E19-1 K201 K13 K27 E10 E12 E13 K38 K200-2-6 K200-2-3 K200-2-2 K200-2-5 K200-2-4 K200-2-5 K200-2-6-1 K200-3 K37 K37 K200-4 K200-5 Screw tightening torque 0.2 _ 0.02N m ( ...

  • Matsushita CF-08TX1A1M - page 54

    11 Replacement Parts List Note: Important Safety Notice Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts. CF-08TX1A1M REF.NO. and AREA PART NO. DESCRIPTION Q'TY Main Block Unit E1 DL3UP1486AAA PCB, MAIN RTL 1 E2 DL3U11487AAA PCB ...

  • Matsushita CF-08TX1A1M - page 55

    K1-1-7 DFHR3C73ZA SPEAKER HOLD SHEET 1 K1-1-8 DFHR3C75ZA BATTERY BOTTOM BLIND SHEET 1 K1-1-9 DFHR3C76YA USB SHEET 1 K1-1-10 DFHR3C78ZA LAN SHEET 1 K1-1-11 DFHR3C79ZA SD SHEET 1 K1-1-12 DFHR3C80ZA PEN HOLD SHEET 2 K1-1-13 DFHR3C82ZA MAIN PCB INS. SHEET 1 K1-1-14 DFQT9976ZA-0 SD LED SIGN LABEL 1 K1-2 DFMD1197ZA KENSINGTON PLATE 1 K1-3 DFMC0867ZA EMI ...

  • Matsushita CF-08TX1A1M - page 56

    K43 DFHR3C43ZA-0 CARD BLIND SHEET 1 K44 DFHR3C74ZA BATTERY CN COVER SHEET 1 K45 DFHR3C77YA AUDIO SHEET 1 K46 DFHR3C81YA MAIN PCB HOLD SHEET 1 K47 DFHR3E39ZA CAPTON TAPE 1 K48 DFHR6207ZA PEN 1 K49 DFHR6224ZA-0 ANTENNA COVER L 1 K50 DFHR6225ZA-0 ANTENNA COVER R 1 K51 DFHR6226ZA-0 PEN COVER 1 K52 DFHR6227ZA-0 BASE JOINT COVER 1 K53 DFGT1079ZA-0 INFORM ...

  • Matsushita CF-08TX1A1M - page 57

    Replacement Parts List CF-08TX1A1M PART NO. DESCRIPTION Q'TY MAIN PCB C 1 F1G1E103A062 CAPACITOR, 25V, 0.01µF 25 C1 0 C5 0 C 150 C 151 C 164 C 169 C 171 C 187 C 188 C 207 C 245 C 247 C 250 C 266 C 278 C 279 C 280 C 311 C 312 C 313 C 314 C 324 C 325 C 326 C 5 F1G1H1R0A543 CAPACITOR, 50V, 1pF 1 C 7 F1G1A104A014 CAPACITOR, 10V, 0.1µF 152 C8 C9 ...

  • Matsushita CF-08TX1A1M - page 58

    C2 7 C2 8 C2 9 C3 0 C3 1 C3 2 C3 3 C3 4 C3 5 C3 6 C3 7 C3 8 C3 9 C4 0 C4 1 C4 2 C4 3 C4 4 C4 9 C5 2 C5 3 C5 5 C5 6 C5 7 C6 5 C6 6 C6 7 C6 8 C6 9 C7 0 C7 1 C7 4 C7 5 C8 1 C8 2 C8 3 C8 4 C8 5 C8 6 C8 7 C8 8 C8 9 C9 0 C9 1 C9 2 C9 3 C9 4 C9 5 C9 6 C9 7 11- 5 ...

  • Matsushita CF-08TX1A1M - page 59

    C9 8 C 102 C 103 C 104 C 105 C 106 C 107 C 108 C 109 C 110 C 111 C 112 C 113 C 114 C 115 C 116 C 117 C 118 C 119 C 120 C 121 C 122 C 125 C 126 C 127 C 138 C 139 C 140 C 141 C 142 C 147 C 148 C 152 C 163 C 170 C 172 C 173 C 175 C 176 C 177 C 178 C 179 C 180 C 181 C 182 C 184 C 186 C 215 C 226 C 230 11- 6 ...

  • Matsushita CF-08TX1A1M - page 60

    C 232 C 233 C 234 C 239 C 241 C 265 C 274 C 276 C 277 C 281 C 282 C 283 C 284 C 285 C 286 C 287 C 288 C 293 C 294 C 295 C 296 C 297 C 298 C 299 C 300 C 301 C 303 C 304 C 306 C 310 C 315 C 316 C 317 C 318 C 319 C 320 C 323 C 11 F1G1H102A496 CAPACITOR, 50V, 1000pF 3 C 216 C 217 C 45 F1G1H680A451 CAPACITOR, 50V, 68pF 4 C4 6 C4 7 C4 8 C 54 F1H1A1050015 ...

  • Matsushita CF-08TX1A1M - page 61

    C 221 C 229 C 231 C 235 C 257 C 258 C 259 C 262 C 263 C 268 C 308 C 100 F1J0J1060004 CAPACITOR, 6.3V, 10µF 23 C 101 C 124 C 135 C 137 C 149 C 174 C 183 C 190 C 191 C 236 C 237 C 238 C 242 C 246 C 248 C 252 C 254 C 255 C 256 C 302 C 305 C 307 C 165 F1G1H8R0A452 CAPACITOR, 50V, 8pF 2 C 166 C 167 F1G1E682A062 CAPACITOR, 25V, 6800pF 2 C 168 C 189 F1G1 ...

  • Matsushita CF-08TX1A1M - page 62

    C 240 C 243 C 227 F1G1H100A452 CAPACITOR, 50V, 10pF 2 C 228 C 251 F1J0J226A048 CAPACITOR, 6.3V, 22µF 6 C 253 C 269 C 336 C 337 C 338 C 260 F1G1H331A450 CAPACITOR, 50V, 330pF 3 C 261 C 264 C 267 F1G1H332A496 CAPACITOR, 50V, 3300pF 1 C 270 EEFUD0J101ER CAPACITOR, 6.3V, 100µF 2 C 271 C 330 F1L1H100A072 CAPACITOR, 50V, 10pF 2 C 331 CN 1 K1KA10BA0014 ...

  • Matsushita CF-08TX1A1M - page 63

    IC 11 IC 15 C3FBRY000001 IC, FLASH MEMORY 1 IC 16 C3ABPY000009 IC, SDRAM 1 IC 19 C0CBCAC00161 IC 1 IC 22 C0JBCZ000523 IC 1 IC 23 C0JBAZ002770 IC, LOGIC 1 IC 26 C0JBAZ002758 IC, LOGIC 1 IC 27 C0JBAZ002239 IC, GATE LOGIC 4 IC 34 IC 35 IC 37 IC 28 C0ZBZ0001023 IC 2 IC 30 IC 31 C0JBAA000350 IC, LOGIC 1 IC 32 C0JBAC000338 IC, GATE LOGIC 1 IC 39 C1CB0000 ...

  • Matsushita CF-08TX1A1M - page 64

    Q4 4 Q 27 UNR9113J0L TRANSISTOR 3 Q3 3 Q3 6 Q 34 XP0421300L TRANSISTOR 3 Q3 5 Q3 8 R 1 ERJ2GEJ473X RESISTOR, 1/16W, 47K Ω 21 R2 8 R2 9 R3 0 R3 1 R3 2 R3 3 R3 6 R3 8 R 168 R 171 R 177 R 178 R 179 R 310 R 311 R 312 R 353 R 354 R 355 R 356 R 2 ERJ2GEJ102X RESISTOR, 1/16W, 1K Ω 9 R6 2 R 172 R 174 R 241 R 242 R 307 R 308 R 309 R 5 ERJ2GE0R00X RESISTOR ...

  • Matsushita CF-08TX1A1M - page 65

    R 265 R 275 R 277 R 279 R 283 R 284 R 292 R 325 R 327 R 7 ERJ2GEJ103X RESISTOR, 1/16W, 10K Ω 11 R8 R9 R2 4 R3 7 R4 3 R 243 R 244 R 253 R 255 R 256 R 10 ERJ2GEJ100X RESISTOR, 1/16W, 10 Ω 16 R1 1 R1 2 R1 3 R1 4 R1 5 R1 6 R1 7 R1 8 R1 9 R2 0 R2 1 R2 7 R4 6 R 187 R 331 R 22 ERJ2GEJ122X RESISTOR, 1/16W, 1.2K Ω 9 R2 3 R4 4 R4 5 R 195 R 196 R 197 R 199 ...

  • Matsushita CF-08TX1A1M - page 66

    R 221 R 222 R 223 R 357 R 358 R 359 R 360 R 35 ERJ2GEJ104X RESISTOR, 1/16W, 100K Ω 58 R4 9 R7 7 R7 8 R8 9 R9 2 R9 4 R9 6 R9 8 R9 9 R 101 R 102 R 103 R 108 R 111 R 112 R 113 R 114 R 117 R 133 R 134 R 135 R 136 R 145 R 146 R 147 R 149 R 150 R 151 R 152 R 153 R 155 R 156 R 157 R 160 R 161 R 164 R 169 R 183 R 185 R 188 R 189 R 219 11- 13 ...

  • Matsushita CF-08TX1A1M - page 67

    R 224 R 235 R 245 R 252 R 259 R 260 R 261 R 262 R 287 R 319 R 320 R 341 R 344 R 345 R 346 R 39 ERJ3GEY0R00V RESISTOR, 1/16W, 0 Ω 18 R4 2 R5 3 R7 0 R7 4 R 107 R 123 R 124 R 127 R 129 R 132 R 143 R 269 R 270 R 272 R 273 R 285 R 286 R 54 ERJ2GEJ150X RESISTOR, 1/16W, 15 Ω 4 R5 5 R5 8 R5 9 R 56 ERJ2GEJ153X RESISTOR, 1/16W, 15K Ω 4 R5 7 R 137 R 139 R ...

  • Matsushita CF-08TX1A1M - page 68

    R 361 R 362 R 363 R 364 R 365 R 366 R 204 ERJ2RKF49R9X RESISTOR, 1/16W, 49.9 Ω 4 R 205 R 206 R 207 R 210 ERJ3EKF1202V RESISTOR, 1/10W, 12K Ω 1 R 211 ERJ3EKF1242V RESISTOR, 1/10W, 12.4K Ω 1 R 236 ERJ2GEJ101X RESISTOR, 1/16W, 100 Ω 9 R 237 R 238 R 239 R 240 R 290 R 291 R 367 R 368 R 246 ERJ2GEJ472X RESISTOR, 1/16W, 4.7K Ω 3 R 247 R 251 R 248 ERJ ...

  • Matsushita CF-08TX1A1M - page 69

    C6 0 C6 1 C6 2 C6 8 C7 3 C 4 F1J0J1060004 CAPACITOR, 6.3V, 10µF 6 C5 C4 4 C5 5 C5 6 C5 8 C 6 F1G1E103A062 CAPACITOR, 25V, 0.01µF 7 C1 1 C4 7 C4 8 C6 9 C7 0 C7 1 C 8 F1H1H104A748 CAPACITOR, 50V, 0.1µF 11 C1 0 C1 6 C1 9 C2 0 C2 1 C2 6 C3 0 C3 3 C4 5 C6 5 C 9 F1J1E105A009 CAPACITOR, 25V, 1µF 1 C 12 F1H1A1050015 CAPACITOR, 10V, 1µF 3 C2 2 C7 2 C 1 ...

  • Matsushita CF-08TX1A1M - page 70

    C 35 F1G1H220A542 CAPACITOR, 50V, 22pF 4 C3 8 C7 6 C7 9 C 36 F1G1H221A450 CAPACITOR, 50V, 220pF 2 C3 7 C 52 F1H0J1050022 CAPACITOR, 6.3V, 1µF 1 C 63 F1G1A683A014 CAPACITOR, 10V, 0.068µF 1 C 66 F1L3D102A012 CAPACITOR, 2000V, 1000pF 2 C6 7 C 74 F1G1H100A452 CAPACITOR, 50V, 10pF 4 C7 5 C7 7 C7 8 CN 1 K1MN50B00046 CONNECTOR 1 CN 3 K1NA09E00076 CONNEC ...

  • Matsushita CF-08TX1A1M - page 71

    IC 1 C0ZBZ0001023 IC 1 IC 3 C0ABZA000047 IC, AMP 1 IC 4 C0ABBA000093 IC, OP AMP 1 IC 5 C0DBDJH00009 IC, LINEAR 1 IC 6 C0DBALH00003 IC 1 IC 7 C0EBH0000336 IC 1 IC 8 C2CBYY000186 IC, MICROCONTROLLER 1 IC 9 C0CBCBC00137 IC, REGURATOR 1 IC 10 C0EBE0000348 IC 1 L 4 J0JKC0000007 INDUCTOR 2 L5 L 6 G1A160H00001 INDUCTOR 1 L 7 G1C100MA0106 INDUCTOR 1 L 8 G1 ...

  • Matsushita CF-08TX1A1M - page 72

    R6 R7 R8 R2 9 R8 1 R 101 R 9 ERJ2GEJ103X RESISTOR, 1/16W, 10K Ω 11 R1 0 R2 2 R4 7 R7 0 R7 3 R7 4 R 108 R 109 R 110 R 111 R 11 ERJ2GEJ104X RESISTOR, 1/16W, 100K Ω 19 R1 2 R2 3 R2 4 R2 5 R2 6 R 137 R 151 R 152 R 153 R 154 R 155 R 156 R 157 R 158 R 159 R 161 R 162 R 164 R 13 ERJ2GEJ471X RESISTOR, 1/16W, 470 Ω 1 R 14 ERJ2GEJ101X RESISTOR, 1/16W, 100 ...

  • Matsushita CF-08TX1A1M - page 73

    R 27 ERJ2GEJ105X RESISTOR, 1/16W, 1M Ω 1 R 28 ERJ2GEJ3R3X RESISTOR, 1/16W, 3.3 Ω 1 R 30 ERJ2GEJ562X RESISTOR, 1/16W, 5.6K Ω 4 R3 1 R3 2 R5 0 R 33 ERJ2RHD103X RESISTOR, 1/16W, 10K Ω 3 R3 4 R8 3 R 35 ERJ2RKF1003X RESISTOR, 1/16W, 10K Ω 3 R3 6 R4 8 R 37 ERJ2RKF1503X RESISTOR, 1/16W, 150K Ω 2 R3 8 R 39 ERJ3GEYJ562V RESISTOR, 1/16W, 5.6K Ω 2 R4 5 ...

  • Matsushita CF-08TX1A1M - page 74

    R9 8 R 140 R 160 R 99 ERJ6GEYJ222V RESISTOR, 1/10W, 2.2K Ω 2 R 100 R 102 ERJ2GEJ223X RESISTOR, 1/16W, 22K Ω 1 R 122 ERJ2GEJ102X RESISTOR, 1/16W, 1K Ω 5 R 123 R 126 R 127 R 141 R 143 ERJ2RKF75R0X RESISTOR, 1/16W, 75 Ω 2 R 144 R 145 ERJ2RKF49R9X RESISTOR, 1/16W, 49.9 Ω 6 R 146 R 147 R 148 R 149 R 150 X 1 H2D800400015 OSCILLATOR, 8MHz 1 SW LED PC ...

  • Matsushita CF-08TX1A1M - page 75

    C 303 C 304 F1J0J1060004 CAPACITOR, 6.3V, 10µF 2 C 308 C 305 F1G0J224A001 CAPACITOR, 6.3V, 0.22µF 1 C 306 F1G1A104A014 CAPACITOR, 10V, 0.1µF 4 C 309 C 310 C 311 C 307 F1G1H471A496 CAPACITOR, 50V, 470pF 1 CN 300 K1MN10B00146 CONNECTOR 1 CN 301 K2HC103B0197 CONNECTOR, HEADPHONE/MICROPHONE 2 CN 302 IC 300 C0ABBA000093 IC, OP AMP 1 L 300 J0MAB000017 ...

  • Matsushita CF-08TX1A1M - page 76

    CN 3 K1QZA1AE0001 CONNECTOR 1 F 1 K5H5011A0015 FUSE, 5A 1 IC 1 N5HZD0000006 IC, LAN MODULE 1 IC 2 N5HZZ0000045 IC, BLUETOOTH MODULE 1 R 4 ERJ2GEJ104X RESISTOR, 1/16W, 100K Ω 1 L 2 J0JDC0000045 INDUCTOR 2 L4 L 3 DDB5Z031I-L INDUCTOR 1 11- 23 ...

  • Matsushita CF-08TX1A1M - page 77

    CF-08 Printed Circuit Board 1 3 7 2 4 5 6 8 BC D F H L A EG I J K Main PCB ...

  • Matsushita CF-08TX1A1M - page 78

    1 3 7 2 4 5 6 8 BC D F H L A EG I J K Main PCB ...

  • Matsushita CF-08TX1A1M - page 79

    1 3 7 2 4 5 6 8 BC D F H L A EG I J K Dock Con PCB Audio Con PCB USB PCB SW LED PCB IO Power PCB ...

  • Matsushita CF-08TX1A1M - page 80

    IO Power 1 I/F CONNECT OR CF- 08 Schematic Diagram Note: All Schematic Diagrams are confidential. 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J SD slot(Reverse) SIGN50660 SDVCC SDVCC PXSDCLK SDDET# PXSDD2 C3 0.1u SDWP PXSDD1 SDVCC R10 10k FPS009-2608-0(01) CN3 1 2 3 4 5 6 7 8 9 10 12 11 13 6.3V C4 10u MIC2548-1YMM IC1 MICREL 8MSOP 1 EN 2 FLG 8 OUT 3 GN ...

  • Matsushita CF-08TX1A1M - page 81

    IO Power 2 DCIN/ BA TTER Y 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J NJM12904V(TE1) IC4 - 2 1 O + 3 SMBCLKE C13 0.1u R42 0.1 NJM12904V(TE1) IC4 V- 4 V+ 8 VSEL R40 0.27 VSENSEB C11 0.01u R41 0.1 C12 1u B NJM12904V(TE1) IC4 - 6 7 O + 5 BATDTCT# ISENSEB SENSON SMBDATAE BATVOL ACIN DCIN&BATT BD3181FVM-TR IC3 ROHM 1 ST 2 IN- 8 VCC 7 VCC 6 OUT 3 IN+ ...

  • Matsushita CF-08TX1A1M - page 82

    IO Power 3 CHARGER 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J C24 10u 25V B R53 3K 0.5% R49 36.5K 1% CHGPWM CHGEN CHARGE DCIN PGND PGND PGND UNR9213J0L Q13 3 1 2 #919AS-160M=P3 L6 1 2 R55 100k 0.1% ERA3YKB104V R56 33K 0.1% ERA3YEB333V R54 100k 0.1% ERA3YKB104V UPA1792G Q16 NEC SOP8 1 S1 2 G1 3 S2 4 G2 8 D1 7 D1 6 D2 5 D2 PGND EP10QY03-TE8L3 D20 2 1 ...

  • Matsushita CF-08TX1A1M - page 83

    IO Power 4 V A3,V A5 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J Nch-MOSFET Nch-MOSFET 1608 3225 C C A 1005 1005 1005 1005 A A C 1005 2012 3225 1005 1608 1608 1608 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 2012 1/4W 2012 1/4W 1608 1005 1005 1608 2012 1608 2012 2012 1/4W 2012 1/4W 005:G5 1005 1005 1005 FDS6912A Q19 FAIRCHILD SOP8 1 S ...

  • Matsushita CF-08TX1A1M - page 84

    IO Power 5 EC 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J 005:E7 2012 001:H6 005:E7;005:G10 005:E7 005:E7 002:D4 002:E8;005:B8;005:D3 005:D10;005:F3 002:F10;005:A11;005:C6 003:C8 002:E8;005:A8;005:D3 002:F8 005:D3 002:E7 005:D4 002:F10 2012 1005 1005 001:B4 001:B5 1005 1005 003:G8 001:B6 005:D5 1005 1005 1005 1005 001:B6 001:B6 001:B6 001:B7 005:D4 0 ...

  • Matsushita CF-08TX1A1M - page 85

    IO Power 6 OVERPROTECT 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J 03P2J-T2-AZ D28 2 3 1 UDZS6.2B D31 2 1 UDZS6.2B D30 2 1 DAN222 D27 2 1 3 ACIN R105 100 BATVOL R99 2.2k R100 2.2k 50V C65 0.1u R102 22k R104 100 UNR9113J0L Q24 3 1 2 R101 47k UNR9213J0L Q25 3 1 2 OVP# VCC_3P3V VCC_5P0V A A C 1005 2012 2012 1608 1005 1005 1005 002:F4;002:G8 ...

  • Matsushita CF-08TX1A1M - page 86

    WLAN 1 SYCHIPWLAN/ BT BOARD 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J ...

  • Matsushita CF-08TX1A1M - page 87

    WLAN 2 SYCHIPWLAN/ BT BOARD 11 10 9 8 7 6 5 4 3 2 1 BC D F H A EG I J ...

Manufacturer Matsushita Category Laptop

Documents that we receive from a manufacturer of a Matsushita CF-08TX1A1M can be divided into several groups. They are, among others:
- Matsushita technical drawings
- CF-08TX1A1M manuals
- Matsushita product data sheets
- information booklets
- or energy labels Matsushita CF-08TX1A1M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Matsushita CF-08TX1A1M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Matsushita CF-08TX1A1M, service manual, brief instructions and user manuals Matsushita CF-08TX1A1M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Matsushita CF-08TX1A1M.

Similar manuals

A complete manual for the device Matsushita CF-08TX1A1M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Matsushita CF-08TX1A1M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Matsushita CF-08TX1A1M.

A complete Matsushita manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Matsushita CF-08TX1A1M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Matsushita CF-08TX1A1M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Matsushita CF-08TX1A1M, that we can find in the current document
3. Tips how to use the basic functions of the device Matsushita CF-08TX1A1M - which should help us in our first steps of using Matsushita CF-08TX1A1M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Matsushita CF-08TX1A1M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Matsushita CF-08TX1A1M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Matsushita CF-08TX1A1M?

Use the form below

If you did not solve your problem by using a manual Matsushita CF-08TX1A1M, ask a question using the form below. If a user had a similar problem with Matsushita CF-08TX1A1M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)