English dropdown-ico

Manual Elation Professional CMY Zoom 575

52 pages 2.81 mb
Download

Go to site of 52

Summary
  • Elation Professional CMY Zoom 575 - page 1

    Rev . 04/07/2006 CMY Zoom 575 User Manual Elation Professional 4295 Charter Street Los Angeles, Ca 90058 www.elationlighting.com ...

  • Elation Professional CMY Zoom 575 - page 2

    CMY Zoom 575™ ©Elation Professional® 2 CMY Zoom 575™ ...

  • Elation Professional CMY Zoom 575 - page 3

    CMY Zoom 575™ ©Elation Professional® 3 CMY Zoom 575™ CONTENTS 1. General Information……………………………………………………………………… 3 a. Introduction………………………………………………………………………. 3 b. Unpacking………………………………………………………. ...

  • Elation Professional CMY Zoom 575 - page 4

    CMY Zoom 575™ ©Elation Professional® 4 CMY Zoom 575™ 1. GENERAL INFORMA TION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The CMY Zoom 575,™ has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read a ...

  • Elation Professional CMY Zoom 575 - page 5

    CMY Zoom 575™ ©Elation Professional® 5 CMY Zoom 575™ Please do not discard the shipping carton in the trash. Please recycle whenever possible. W ARRANTY REGISTRA TION : The CMY Zoom 575™ carries a two year (730 days) limited warranty . Please fill out the enclosed warranty card to validate your purchase. All returned service items whether u ...

  • Elation Professional CMY Zoom 575 - page 6

    CMY Zoom 575™ ©Elation Professional® 6 CMY Zoom 575™ Thus, lamp should always be replaced at the end of their recommended duty cycle. Extreme caution should be used when operated this or any fixture fitted with a gas discharge lamp. Never open this fixture while in use! During the initial operation of this fixture, a light smoke or smell may ...

  • Elation Professional CMY Zoom 575 - page 7

    CMY Zoom 575™ ©Elation Professional® 7 CMY Zoom 575™ 2. SAFETY INSTRUCTIONS The CMY Zoom 575™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not accept responsibility for damages resulting from the mis ...

  • Elation Professional CMY Zoom 575 - page 8

    CMY Zoom 575™ ©Elation Professional® 8 CMY Zoom 575™ may increase the risk of damage and/or personal injury. 10. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture. 11. Do not attempt to operate this fixture if the power cord has become damaged or frayed. Important Notice: Damages resulting from the disregard ...

  • Elation Professional CMY Zoom 575 - page 9

    CMY Zoom 575™ ©Elation Professional® 9 CMY Zoom 575™ 3. FEA TURES • 3 operation mode: o DMX controlled, o Stand alone o Sound activated • 10 Dichroic Filters (7 Colors, UV Filter, CTB 64K Filter, CTC 32K Filter, plus white) • User selectable color change (mode 1: full colors, mode 2: split-colors) • CMY Subtractive Color Mixing • St ...

  • Elation Professional CMY Zoom 575 - page 10

    CMY Zoom 575™ ©Elation Professional® 10 CMY Zoom 575™ 4. GENERAL GUIDELINES This fixture is a professional lighting ef fect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to so. This fixture was designed for indoor use only , use of this fixture outside wi ...

  • Elation Professional CMY Zoom 575 - page 11

    CMY Zoom 575™ ©Elation Professional® 1 1 CMY Zoom 575™ 5. LAMP INST ALLA TION INSTRUCTIONS Installing or replacing the lamp Only install the lamp with the device unplugged from the mains. The lamp has to be replaced when it is damaged or deformed. Before replacing the lamp, be sure the unit has had ample time to cool. To avoid self injury, ne ...

  • Elation Professional CMY Zoom 575 - page 12

    CMY Zoom 575™ ©Elation Professional® 12 CMY Zoom 575™ equivalent). Please remember there is only one way to insert the lamp and the lamp should fit completely in the lamp socket. 5. Once the lamp has been inserted into the socket, gently slide the socket assembly back into place and secure with the two Phillips screws. 6. Always be sure to op ...

  • Elation Professional CMY Zoom 575 - page 13

    CMY Zoom 575™ ©Elation Professional® 13 CMY Zoom 575™ adjustment screws ( "1, 2, 3”) counterclockwise turn until the light is bright and evenly distributed. Please remember that a MSD 575/2 lamp is not a hot- restrike lamp therefore, you should wait at least 15 minutes before attempting to strike the lamp once it has been turned of f. ...

  • Elation Professional CMY Zoom 575 - page 14

    CMY Zoom 575™ ©Elation Professional® 14 CMY Zoom 575™ 6. MOUNTING and INST ALLA TION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal. Before mounting the fixture to any surface, make sure that the installation area can hold ...

  • Elation Professional CMY Zoom 575 - page 15

    CMY Zoom 575™ ©Elation Professional® 15 CMY Zoom 575™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications ...

  • Elation Professional CMY Zoom 575 - page 16

    CMY Zoom 575™ ©Elation Professional® 16 CMY Zoom 575™ Clamp Mounting The CMY Zoom 575™ provides a unique mounting bracket assembly that integrates the hanging yoke as well as the safety cable rigging point in one unit (see the illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamp to the hang ...

  • Elation Professional CMY Zoom 575 - page 17

    CMY Zoom 575™ ©Elation Professional® 17 CMY Zoom 575™ 7. Understanding DMX Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): Your fixture and your DMX controller require a standard 3-pin XLR connector for data input and data output (see figure below). If you are constructing your own cables be sure to use two conductor ...

  • Elation Professional CMY Zoom 575 - page 18

    CMY Zoom 575™ ©Elation Professional® 18 CMY Zoom 575™ other side to the male 3-pin XLR input of the moving head (Please refer to the diagram below .). Y ou can chain multiple moving heads together through ser ial linking. The cable needed should be two conductor , shielded cable with XLR input and output connectors. Always be sure daisy chain ...

  • Elation Professional CMY Zoom 575 - page 19

    CMY Zoom 575™ ©Elation Professional® 19 CMY Zoom 575™ Fixture DMX addressing; All fixtures should be given a DMX starting address when using a DMX controller , so the correct fixture responds to the correct control signal. This digital starting address is the channel number from which the fixture starts to “listen” to the digital control ...

  • Elation Professional CMY Zoom 575 - page 20

    CMY Zoom 575™ ©Elation Professional® 20 CMY Zoom 575™ signal the display will flash "A.XXX" (XXX representing the actual DMX address). If your fixture is connected to a DMX controller and the display is flashing (not receiving a DMX signal), please check the following: - The 3 PIN XLR plug (cable with DMX signal from controller) is ...

  • Elation Professional CMY Zoom 575 - page 21

    CMY Zoom 575™ ©Elation Professional® 21 CMY Zoom 575™ 8. DISPLA Y LED INDICA T ORS The CMY Zoom 575™ has two LED indicators on the display . These indicators are designed to give a quick visual indication of the fixtures’ status. The illustration below details the functionality of the LED indicators. . . . . Lamp on Lamp on DMX OK DMX OK ...

  • Elation Professional CMY Zoom 575 - page 22

    CMY Zoom 575™ ©Elation Professional® 22 CMY Zoom 575™ 9. FIXTURE MENU On-Board System Menu: The CMY ZOOM 575™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the top, front of the fixture allows you to access the main ...

  • Elation Professional CMY Zoom 575 - page 23

    CMY Zoom 575™ ©Elation Professional® 23 CMY Zoom 575™ COLR Reset only motors for colors SHTR Reset only motors for shutter and/or dimmer OTHR Reset other motors LIFE 0000~9999 Displays the total fixture running time LAMP 0000~9999 Displays a lamps running time 5 TIME CLMP Clear lamp running time 6 MIC M-XX M-70 Mic sensitivity V ALU D–XX D- ...

  • Elation Professional CMY Zoom 575 - page 24

    CMY Zoom 575™ ©Elation Professional® 24 CMY Zoom 575™ Main Menu Functions 0. ADDRESS MENU - AOO1 - A51 1 (V alue) - This is where you set the fixtures DMX address. Setting/Changing the DMX Address After applying power to the CMY ZOOM 575™ the LED will display the fixture’s current DMX address immediately after the reset sequence. If the f ...

  • Elation Professional CMY Zoom 575 - page 25

    CMY Zoom 575™ ©Elation Professional® 25 CMY Zoom 575™ will test the color channel, changing the color one by one and show the rainbow ef fect with different speeds. Again please remember , there are 10 DMX channels, and all except channels 3, 6, and 10 can be tested 4. Press MODE/ESC to exit. 2. PLAY MENU - RUN – This feature is used to run ...

  • Elation Professional CMY Zoom 575 - page 26

    CMY Zoom 575™ ©Elation Professional® 26 CMY Zoom 575™ 4. T ap the UP or DOWN button to select “ OFF”, “RUN” or “ AUDI” and press ENTER to confirm. 5. Press MODE/ESC to return to the main menu. 3. LAMP MENU - – This menu function will manually turn the lamp on and of f. Follow the procedure below to enter the lamp menu: 1. Access ...

  • Elation Professional CMY Zoom 575 - page 27

    CMY Zoom 575™ ©Elation Professional® 27 CMY Zoom 575™ COLR - When you activate this reset function, the fixture will only reset the color wheel motor . 1. Access the main menu. 2. T ap the UP button until “RESE” is displayed, press ENTER. 3. T ap the UP button until “COLR” is displayed, then press ENTER to confirm and begin the reset ...

  • Elation Professional CMY Zoom 575 - page 28

    CMY Zoom 575™ ©Elation Professional® 28 CMY Zoom 575™ 2. T ap the UP button until “RESE” is displayed, press ENTER. 3. T ap the UP button un til “OTHR” is displayed, press ENTER to con firm and begin the reset process. 4. Press MODE/ESC to return to the main menu. 5. TIME MENU - LIFE - Displays the fixtures total running time. LAMP - ...

  • Elation Professional CMY Zoom 575 - page 29

    CMY Zoom 575™ ©Elation Professional® 29 CMY Zoom 575™ 3. T ap the UP button until “CLMP” is displayed, then press ENTER to reset the lamp running time. 4. Press MODE/ESC to return to the main menu. 6. MIC MENU - This function allows for electronic control of the internal microphone’s sound sensitivity . 1. Access the main menu. 2. T ap ...

  • Elation Professional CMY Zoom 575 - page 30

    CMY Zoom 575™ ©Elation Professional® 30 CMY Zoom 575™ 2. T ap the UP button until “DISP” is displayed. 3. Press ENTER, the display will show “V ALU”. 4. T ap the UP button until ”D-ON” is displayed and tap the ENTER button. 5. Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this functio ...

  • Elation Professional CMY Zoom 575 - page 31

    CMY Zoom 575™ ©Elation Professional® 31 CMY Zoom 575™ feature on and of f. 1. Access the main menu. 2. T ap the UP button until “SPEC” is displayed, press ENTER. 3. T ap the UP button until “LAAU” is displayed, press ENTER. 4. The display will show “ON/OFF .” 5. Press the UP button to display “ON” to activate this function, or ...

  • Elation Professional CMY Zoom 575 - page 32

    CMY Zoom 575™ ©Elation Professional® 32 CMY Zoom 575™ 2 to a value of “7” and use channel 3 to set your address to 57 by selecting a channel value of 57. Example 2: If you want to set the starting address to 420, set channel 1 to a value of “7,” channel 2 to "8" and channel 3 to "164" (256+164=420). 4. W ait for ap ...

  • Elation Professional CMY Zoom 575 - page 33

    CMY Zoom 575™ ©Elation Professional® 33 CMY Zoom 575™ 1. Access the main menu. 2. T ap the UP button until “SPEC” is displayed, press ENTER. 3. T ap the UP button until “DFSE” is displayed, press ENTER. 4. The display will show “ON/OFF .” 5. Press the UP button to display “ON” to activate this function, or “OFF” to deactiv ...

  • Elation Professional CMY Zoom 575 - page 34

    CMY Zoom 575™ ©Elation Professional® 34 CMY Zoom 575™ 5. Press UP or DOWN button to select “HIGH” or “AUTO”. 6. Press ENTER to confirm. 7. Press MODE/ESC to return to the main menu. VER - Use this function to display the Software version of the unit. 1. Access the main menu. 2. T ap the UP button until “SPEC” is displayed, press E ...

  • Elation Professional CMY Zoom 575 - page 35

    CMY Zoom 575™ ©Elation Professional® 35 CMY Zoom 575™ 9. Once you reach your desired calibration press ENTER to confirm and lock in your calibration. 9. EDIT MENU - T his menu item allows you to write a program into the fixture’s memory (EEPROM) via the control panel or via an external DMX controller . STEP (S-01 - S-48) - These are the ste ...

  • Elation Professional CMY Zoom 575 - page 36

    CMY Zoom 575™ ©Elation Professional® 36 CMY Zoom 575™ STEP - With this function you can program the number of steps in your individual Program. 1. Access the main menu. 2. T ap the UP button until “EDIT” is displayed, press ENTER. 3. T ap the UP button until “STEP” is displayed, press ENTER. 4. The display shows “S-01”, this indic ...

  • Elation Professional CMY Zoom 575 - page 37

    CMY Zoom 575™ ©Elation Professional® 37 CMY Zoom 575™ 5. The display will show the DMX value for the channel that is being edited. It will be displayed as “07XX,” it stands for Channel 7 of the editing scene, the DMX value is “XX.” 6. Adjust the DMX value by tapping the UP button, until you get the expected ef fect for this channel. 7 ...

  • Elation Professional CMY Zoom 575 - page 38

    CMY Zoom 575™ ©Elation Professional® 38 CMY Zoom 575™ the first scene. 9. Adjust the Step-time as described above. 10. Call up the second scene in your controller now . 11. Repeat steps 5-1 1 until all desired scenes are downloaded. 12. Press MODE/ESC to exit. The number of steps can be defined under “STEP” and the scenes can be called up ...

  • Elation Professional CMY Zoom 575 - page 39

    CMY Zoom 575™ ©Elation Professional® 39 CMY Zoom 575™ 10 . DMX CHANNEL TRAITS The chart below details the channel layout for 11 DMX channels. CHANNEL 1: Color Wheel CHANNEL 2: Cyan Filter CHANNEL 3: Magenta Filter CHANNEL 4: Y ellow Filter CHANNEL 5: Strobe Control CHANNEL 6: Mechanical Dimmer CHANNEL 7: Effect Wheel (Beam Shape, Frost Filter ...

  • Elation Professional CMY Zoom 575 - page 40

    CMY Zoom 575™ ©Elation Professional® 40 CMY Zoom 575™ DMX channel function and values: Channel 1 - Color Wheel: 0-15 Open / white 16-31 Red 32-47 Blue 48-63 Green 64-79 Light Y ellow 80-95 UV filter 96-1 1 1 CTB 1 12-127 CTO 128-189 Forwards rainbow effect from fast to slow 190-191 No rotation 192-255 Backwards rainbow ef fect from slow to fa ...

  • Elation Professional CMY Zoom 575 - page 41

    CMY Zoom 575™ ©Elation Professional® 41 CMY Zoom 575™ Channel 8 - Zoom: 0-255 Zoom 27 - Zoom 19 Channel 9 - Color macros - CMY and color wheel 0-7 Off 8-15 Macro1 16-23 Macro2 24-31 Macro3 32-39 Macro4 40-47 Macro5 48-55 Macro6 56-63 Macro7 64-71 Macro8 72-79 Macro9 80-87 Macro10 88-95 Macro1 1 96-103 Macro12 104-1 1 1 Macro13 1 12-1 19 Macro ...

  • Elation Professional CMY Zoom 575 - page 42

    CMY Zoom 575™ ©Elation Professional® 42 CMY Zoom 575™ 246-255 No function Channel 1 1 – Lamp on/off, reset, internal programms 0-19 Color change normal 20-39 Color change to any position 40-59 Lamp on 60-79 Lamp switch of f 80-84 All motor reset 85-87 No function 88-90 Colors motor reset 91-93 No function 94-96 Shutter & Dimmer motor re ...

  • Elation Professional CMY Zoom 575 - page 43

    CMY Zoom 575™ ©Elation Professional® 43 CMY Zoom 575™ 1 1. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer” ...

  • Elation Professional CMY Zoom 575 - page 44

    CMY Zoom 575™ ©Elation Professional® 44 CMY Zoom 575™ the reset. ...

  • Elation Professional CMY Zoom 575 - page 45

    CMY Zoom 575™ ©Elation Professional® 45 CMY Zoom 575™ 12. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall. 2. There must n ...

  • Elation Professional CMY Zoom 575 - page 46

    CMY Zoom 575™ ©Elation Professional® 46 CMY Zoom 575™ 13. 2-YEAR LIMITED WARRANTY A. Elation Professional ® hereby warrants, to the original purchaser , Elation Professional ® products to be free of manufacturing defects in material and workmanship for a period of two years, (730 days) from the date of purchase. This warranty shall be valid ...

  • Elation Professional CMY Zoom 575 - page 47

    CMY Zoom 575™ ©Elation Professional® 47 CMY Zoom 575™ identifying marks to that effect. E. Elation Professional ® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F . No warranty , whether expressed or implied, is given ...

  • Elation Professional CMY Zoom 575 - page 48

    CMY Zoom 575™ ©Elation Professional® 48 CMY Zoom 575™ 14. PHOTOMETRIC DA T A ...

  • Elation Professional CMY Zoom 575 - page 49

    CMY Zoom 575™ ©Elation Professional® 49 CMY Zoom 575™ 15. DIMENSIONAL DRAWINGS ...

  • Elation Professional CMY Zoom 575 - page 50

    CMY Zoom 575™ ©Elation Professional® 50 CMY Zoom 575™ 16. CIRCUIT SCHEMA TIC ...

  • Elation Professional CMY Zoom 575 - page 51

    CMY Zoom 575™ ©Elation Professional® 51 CMY Zoom 575™ 18. TECHNICAL SPECIFICA TIONS Power supply: Operating Voltage _98V AC, 50Hz; _ 120V AC, 50Hz; _ 208V AC, 50Hz; _ 220V AC, 50Hz; _ 230V AC, 50Hz; _ 240V AC, 50Hz; or _ 98VAC,60Hz; _ 120VAC,60Hz; _ 208VAC,60Hz; _ 220VAC,60Hz; _ 230VAC,60Hz; _ 240VAC,60Hz; Fuse protection 120V = 6A/250V, GMA ...

  • Elation Professional CMY Zoom 575 - page 52

    CMY Zoom 575™ ©Elation Professional® 52 CMY Zoom 575™ Elation Professional 4295 Charter Street Los Angeles, CA. 90058 323-582-3322 / 323-582-3108 fax www .ElationLighting.com /Info@ElationLighitng.com ...

Manufacturer Elation Professional Category Indoor Furnishings

Documents that we receive from a manufacturer of a Elation Professional CMY Zoom 575 can be divided into several groups. They are, among others:
- Elation Professional technical drawings
- CMY Zoom 575 manuals
- Elation Professional product data sheets
- information booklets
- or energy labels Elation Professional CMY Zoom 575
All of them are important, but the most important information from the point of view of use of the device are in the user manual Elation Professional CMY Zoom 575.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Elation Professional CMY Zoom 575, service manual, brief instructions and user manuals Elation Professional CMY Zoom 575. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Elation Professional CMY Zoom 575.

Similar manuals

A complete manual for the device Elation Professional CMY Zoom 575, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Elation Professional CMY Zoom 575 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Elation Professional CMY Zoom 575.

A complete Elation Professional manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Elation Professional CMY Zoom 575 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Elation Professional CMY Zoom 575, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Elation Professional CMY Zoom 575, that we can find in the current document
3. Tips how to use the basic functions of the device Elation Professional CMY Zoom 575 - which should help us in our first steps of using Elation Professional CMY Zoom 575
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Elation Professional CMY Zoom 575
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Elation Professional CMY Zoom 575 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Elation Professional CMY Zoom 575?

Use the form below

If you did not solve your problem by using a manual Elation Professional CMY Zoom 575, ask a question using the form below. If a user had a similar problem with Elation Professional CMY Zoom 575 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)