-
JVC 0807TNH-II-IM - page 1
Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. LCT2329-001A- ...
-
JVC 0807TNH-II-IM - page 2
2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit. 2. A void damaging the AC plug and power cord. 3. Avoid Improper ...
-
JVC 0807TNH-II-IM - page 3
3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat ...
-
JVC 0807TNH-II-IM - page 4
4 15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 16) Avoid improper installation and never position the unit where good ventilation is impossible. When installing this TV , distance recommendations must be maintained between the set and the wall, as we ...
-
JVC 0807TNH-II-IM - page 5
5 W arnings Displaying fi xed images for extended periods of time can leave a subtle but temporary ghost image on your screen. T o avoid this, mix your viewing pattern. Examples include, but are not limited to the following: A voiding Ghost Images XYZ XYZ TV on TV off For example... • Stock-market report bars • Shopping channel logos and prici ...
-
JVC 0807TNH-II-IM - page 6
6 W arnings Caring for the Cabinet Caring for the Screen Normally , light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water . Y ou can add a few drops of mild liquid detergent to the water to help remove spot ...
-
JVC 0807TNH-II-IM - page 7
7 W arnings Disconnecting the stand If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole. 1) Place the TV face down on a soft cloth on a table. 2) Remove the four screws from the back of the TV . 3) Pull out the stand from the TV . 4) Cover the hole with a bottom cover and tighten the screw . Note: • T o re- ...
-
JVC 0807TNH-II-IM - page 8
8 T able of Contents Important Safety Precautions . . 2 W arnings . . . . . . . . . . . . . . . 5 Quick Setup . . . . . . . . . . . . . . 9 Unpacking your TV . . . . . . . . . . . . 9 TV Models . . . . . . . . . . . . . . . . 10 TV Remote Control . . . . . . . . . . . 1 1 Getting Started . . . . . . . . . . . . . 12 The Remote Control . . . . . . . ...
-
JVC 0807TNH-II-IM - page 9
9 Quick Setup Thank you for your purchase of a JVC LCD Flat T elevision. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: POWER D/A MODE TV STB VCR DVD AUDIO INPUT 123 456 789 0 TUNE TV RETURN + LIGHT MUTING – CH + – VOL ...
-
JVC 0807TNH-II-IM - page 10
10 INPUT 5 UDIO OUT FOR HDMI 1 R A U D I O I N P U T L INPUT 4 Y V I D E O R - A U D I O - L V I D E O R - A U D I O - L P C I N ( D - S U B ) INPUT 3 Y P R P B V I D E O R- A UD I O - L S - V I D E O AUDIO OUT AUDIO OUT R- A UD I O - L P R P B RS-232C SERVICE ONLY DIGITAL AUDIO OPTICAL OUT INPUT 5 INPUT 2 INPUT 1 INPUT 5 UDIO OUT FOR HDMI 1 R AU D ...
-
JVC 0807TNH-II-IM - page 11
11 Quick Setup Notes: • For information on remote control buttons, see pages 58 - 68. • SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an A TSC antenna or Digital Cable, you can use these buttons. • This remote control is capable of operating many external device brands. See page 69 - 74 for how to program ...
-
JVC 0807TNH-II-IM - page 12
12 Quick Setup These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Before you can operate your remote control, you first need to i ...
-
JVC 0807TNH-II-IM - page 13
13 Step 2 - Connecting your devices Quick Setup Notes: • The following connection diagrams are examples. • After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV . • If you follow these diagrams and the television does not work properly , contact your local cable operator . • T o ...
-
JVC 0807TNH-II-IM - page 14
14 Quick Setup Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before start ...
-
JVC 0807TNH-II-IM - page 15
15 Quick Setup Diagram #2 INPUT 5 UDIO OUT FOR HDMI 1 R AUDIO INP UT L INPUT 4 Y V I D E O R - AU D I O - L V I D EO R - A U D I O - L P C IN (D -S U B ) INPUT 3 Y P R P B V I DEO R - AU D I O -L S - VID EO UDIO OUT AUDIO OUT R - A U D I O - L P R P B TV Rear Panel Coaxial Cable VCR DVD Player OR IN OUT IN OUT R L V Y P B P R OUT AUDIO OUT R L Gree ...
-
JVC 0807TNH-II-IM - page 16
16 Quick Setup 1) Connect a yellow composite cable from the camcorder VIDEO OUT to the VIDEO IN on the back of the TV . 2) Connect a white cable from the camcorder LEFT AUDIO OUT to the LEFT AUDIO IN on the back of the TV . 3) Connect a red cable from the camcorder RIGHT AUDIO OUT to the RIGHT AUDIO IN on the back of the TV . Y ou can connect a cam ...
-
JVC 0807TNH-II-IM - page 17
17 Quick Setup UDIO OUT FOR HDMI 1 R AUD I O I NP UT L INPUT 3 P R P B V I DEO R - AU D I O - L S - V ID E O UDIO OUT AUDIO OUT R - A U D I O - L Speaker Speaker Amplifier TV Rear Panel 1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier . 2) Connect a red cable from the RIGHT AUDIO OUT ...
-
JVC 0807TNH-II-IM - page 18
18 Quick Setup By connecting a Digital TV Receiver , high definition pictures can be displayed on your TV in their digital form. RS-232C SERVICE ONLY DIGITAL AUDIO OPTICAL OUT INPUT 5 INPUT 2 INPUT 1 UDIO OUT FOR HDMI 1 R A UD IO INP UT L R - AU D I O -L UDIO OUT AUDIO OUT R - A U D I O - L DTV Decoder HDMI to DVI Cable A fter the connections have ...
-
JVC 0807TNH-II-IM - page 19
19 Quick Setup By connecting an HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or other HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provi ...
-
JVC 0807TNH-II-IM - page 20
20 Quick Setup Connecting to an amplifier using your optical output Y ou can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or DOLBY DIGIT AL. RS-232C SERVICE ONLY DIGITAL AUDIO OPTICAL OUT INPUT 5 INPUT 2 INPUT 1 TV Rear Panel Amplifier ...
-
JVC 0807TNH-II-IM - page 21
21 Quick Setup By connecting your A V Receiver to your television's V3 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV . This allows you to free up the other input connections so you can connect more devices to your television. Connecting to an A V R ...
-
JVC 0807TNH-II-IM - page 22
22 Quick Setup This TV can be used as a computer screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer , use a commercially available RCA cable to connect the INPUT -5 audio input terminal to the computer&apo ...
-
JVC 0807TNH-II-IM - page 23
23 Quick Setup T able of signals for each type of computer Resolution 640 x 480 (VGA) 1024 x 768 (XGA) V ertical Frequency (Hz) 60.0 60.0 Horizontal Frequency (kHz) 31.5 48.4 When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60Hz. Computers ...
-
JVC 0807TNH-II-IM - page 24
24 When you turn your television on for the first time the interactive plug in menu will appear . The plug in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear . • Setting the TV’s clock to the correct time so your timer functions will work properl ...
-
JVC 0807TNH-II-IM - page 25
25 T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o set the hour † T o minute √ ® T o set the minute † T o TIME ZONE √ ® T o select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) † T ...
-
JVC 0807TNH-II-IM - page 26
26 Quick Setup When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Y our quick setup is now complete. Y ou can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewin ...
-
JVC 0807TNH-II-IM - page 27
27 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’ s side panel instead of the remote, an additional menu screen showing VIDEO ST A TUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST . The “INTERACT ...
-
JVC 0807TNH-II-IM - page 28
28 T o open the onscreen menu system, press the M ENU button on the remote control. Y ou navigate within the onscreen menus by using the four directional arrow buttons on the remote control. The selected feature and option on a menu screen are highlighted in a different color . T o move to a different feature use the π † arrows to move up or dow ...
-
JVC 0807TNH-II-IM - page 29
29 Press the M ENU button Onscreen Menus INITIAL SETUP SELECT OPERA TE EXIT MENU NEXT P AGE PREVIOUS OFF ON (3/5) ILLUMINA TION LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID ENG. FRAN. ESP . LOW INITIAL SETUP 03 INITIAL SETUP SELECT OPERA TE EXIT MENU NEXT P AGE PREVIOUS (4/5) AUTO TUNER SETUP CHANNEL SUMMARY V-CHIP SET LOCK CODE AUTO DEMO ON INITIA ...
-
JVC 0807TNH-II-IM - page 30
30 Initial Setup Menus This feature is used if you have a DVI or HDMI compatible component connected to your TV . Press the M ENU button π † T o VIDEO-1 AUDIO √ ® T o select ANALOG, DIGIT AL or AUTO Press the Menu button when fi nished Notes: • If your DVI or HDMI component is capable of digital audio and video, choose DIGIT AL. If your DV ...
-
JVC 0807TNH-II-IM - page 31
31 This feature inserts a blank gray screen over channels which are not broadcasting or are too weak to be received clearly . Press the M ENU button π † T o NOISE MUTING √ ® T o turn ON or OFF Press the M ENU button when finished Notes: • Noise muting will not work during auto tuner setup or when you operate channel summary . • Noise muti ...
-
JVC 0807TNH-II-IM - page 32
32 Initial Setup Menus This function is used to label video input connections for the onscreen displays. Press the M ENU button π † T o VIDEO INPUT LABEL √ ® T o enter π † T o select the desired video input √ ® T o select the desired preset input label (see chart below) Press the OK button to save Press the M ENU button when finished Vi ...
-
JVC 0807TNH-II-IM - page 33
33 Initial Setup Menus Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama or cinema. Press the M ENU button π † T o POSITION ADJUSTMENT √ ® T o enter π † √ ® T o adjust the position Press the M ENU button to finish Notes: • T o reset the adjustment to the ce ...
-
JVC 0807TNH-II-IM - page 34
34 Initial Setup Menus The illumination feature allows you to adjust the brightness of the light on the front of the television. When you turn the power on the televison, the front panel light remains on when illumination is set to LOW or HIGH. Press the Menu button π † T o ILLUMINA TION √ ® T o choose HIGH, LOW or OFF Press the M ENU button ...
-
JVC 0807TNH-II-IM - page 35
35 Initial Setup Menus Digital Auto Setting Press the M ENU button π † T o CLOSED CAPTION √ ® T o enter π † T o T ype √ ® T o select Auto, Advanced or Basic Auto: Shows closed caption a priority for digital channels over analog channels. It is set automatically . Advanced: Shows only the digital closed caption. Basic: Shows only the ana ...
-
JVC 0807TNH-II-IM - page 36
36 Initial Setup Menus • Closed caption subtitles are usually found on closed caption channel CC1. Some programs may include additional text information which is usually found on text channel T1. The other channels are available for future use. • Closed captioning may not work correctly if the signal being received is weak or if you are playing ...
-
JVC 0807TNH-II-IM - page 37
37 Initial Setup Menus This function automatically shuts off your TV when there is no signal from the channel or no operation while the TV is on for 10 minutes. Press the M ENU button π † T o AUT O SHUT OFF √ ® T o turn ON or OFF Press the M ENU button when finished • If the channel that you have on does not receive a signal for more than o ...
-
JVC 0807TNH-II-IM - page 38
38 Initial Setup Menus Channel Summary Channel summary allows you to customize the line-up of channels received by your TV . Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the only channels that will appear are the ones ...
-
JVC 0807TNH-II-IM - page 39
39 Initial Setup Menus How to set the channel label. (This is only for analog broadcasting.) Press the M ENU button π † T o CHANNEL SUMMARY √ ® T o operate √ ® T o the ID column Press the O K button to enter √ ® T o select the character you want π † T o move to the next space ...continue to follow these directions for all four spaces ...
-
JVC 0807TNH-II-IM - page 40
40 Initial Setup Menus When a viewer attempts to watch a guarded channel, the following message appears: T o watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen. The channel cannot be accessed until the correct code is entered. N ...
-
JVC 0807TNH-II-IM - page 41
41 Initial Setup Menus Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ® T o VIEW or BLOCK Press M ENU when done Directions to Block Unrated Programs Unrated Programs Unrated programming refers to any ...
-
JVC 0807TNH-II-IM - page 42
42 Initial Setup Menus U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitab ...
-
JVC 0807TNH-II-IM - page 43
43 Initial Setup Menus Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example: T o block viewing of all TV 14 shows, ...
-
JVC 0807TNH-II-IM - page 44
44 Initial Setup Menus ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming includi ...
-
JVC 0807TNH-II-IM - page 45
45 Initial Setup Menus Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter ratings menu For example: T o block viewing of programming rated 14+ shows, move the cursor to the 14+ column and add a lock icon. Onc ...
-
JVC 0807TNH-II-IM - page 46
46 Initial Setup Menus Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below . Press the M ENU button π † T o SET LOCK CODE √ ® T o operate (lock icon appears) ...
-
JVC 0807TNH-II-IM - page 47
47 Initial Setup Menus Auto Demo Use this function when you are receiving a digital broadcast. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter The onscreen will appear Notes: • Software Update will only appear when the USB memory is inserted into the USB connector . • If you are watching an analog channel, you can still access ...
-
JVC 0807TNH-II-IM - page 48
48 Initial Setup Menus Digital Sound Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories. Y ou can select the optical digital sound output, either PCM or DOLBY DIGIT AL when your TV is connected to an amplifier that has DOLBY DIGIT AL decoder . If you select DOLBY DIGIT ...
-
JVC 0807TNH-II-IM - page 49
49 Initial Setup Menus At first, connect the USB memory into the USB connector . This function will appear only when the USB memory is inserted into the USB connector . Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter π † T o Software Update √ ® T o enter π † Checks if it needs an update or not Press the M ENU button when ...
-
JVC 0807TNH-II-IM - page 50
50 Picture Adjust Menus Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT , DET AIL or ENERGY SA VER MODE √ ® T o enter √ ® T o adjust the setting π † T o back to the picture main menu π † T o move to the next setting Press the M ENU button when finished Notes: • DET AIL menu cannot be selected when the Video Status mode ...
-
JVC 0807TNH-II-IM - page 51
51 Picture Adjust Menus Color Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. Press the M ENU button π † T o COLOR MANAGEMENT √ ® T o enter π † T o turn ON or OFF Press the M ENU button when finished COLOR MANAGEMENT ON OFF Dynamic Gamma JVC's Dynamic Gamma Circu ...
-
JVC 0807TNH-II-IM - page 52
52 Picture Adjust Menus Natural Cinema Natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges of these programs, choose N A TURAL C INEMA and set it to AUTO. Natural Cinema helps correct conversion errors that occ ...
-
JVC 0807TNH-II-IM - page 53
53 Picture Adjust Menus This function effects the block noise removal and mosquito NR (Noise Reduction) simultaneously . Press the M ENU button π † T o MPEG NR √ ® T o enter π † T o turn ON or OFF Press the M ENU button when finished Notes: • When you are receiving digital channels, block noise removal will have no effect. • When you a ...
-
JVC 0807TNH-II-IM - page 54
54 Reset Reset resets all picture adjustments except for Natural Cinema at once to the default settings. Press the M ENU button π † T o RESET Press the O K button The onscreen menu disappears for a moment, and then the settings are reset to the default setting for all the picture adjustments except for NA TURAL CINEMA. Press the M ENU button whe ...
-
JVC 0807TNH-II-IM - page 55
55 Sound Adjust Menus These settings allow you to change and adjust the sound on your television. Four sound settings (MaxxBass, MaxxT reble, MaxxStereo and MaxxV olume) are referred as "MaxxAudio". See page 64. MaxxBass – Compensates for low frequencies and widens the frequency band. MaxxT reble – Compensates for high frequencies and ...
-
JVC 0807TNH-II-IM - page 56
56 Clock/T imers Menus Set Clock The set clock function is described on page 25 as the interactive plug in menu. Y ou can choose to set the clock automatically or manually . If you need to set the clock again, follow the steps below . Press the M ENU button π † T o SET CLOCK √ ® T o enter When you set the clock automatically , choose AUTO by ...
-
JVC 0807TNH-II-IM - page 57
57 Clock/T imers Menus The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the M ENU button π † T o ON/OFF TIMER √ ® T o enter (begins with ON TIME) √ ® T o set the hour (AM/PM) you want the ...
-
JVC 0807TNH-II-IM - page 58
58 Button Functions T urns the TV on or off. Press the P OWER button Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12: 1 (One) 2 (T wo) T une Lets you decide the input channel and select it. After you press the number buttons on the remote, press the T UNE button. For example, t ...
-
JVC 0807TNH-II-IM - page 59
59 Button Functions Use these buttons to raise or lower the TV’ s volume level. The maximum is the level you set in V olume Limit. See page 55. The M UTING button instantly turns the volume down completely when you press it. Press M UTING and the volume level will instantly go to zero. T o restore the volume to its previous level, press M UTING a ...
-
JVC 0807TNH-II-IM - page 60
60 Button Functions The R ETURN +/TV button has three functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. TV - Returns to the TV mode. Press the R ETURN +/TV and hold for three sec ...
-
JVC 0807TNH-II-IM - page 61
61 Button Functions The Favorite button allows you to select your favorite channels easily . First, you must register the channels that you like. See how to register below . Press the F A VORITE button The favorite channel list will appear . π † T o select the channel you want to watch Press the O K button It will change to the channel you have ...
-
JVC 0807TNH-II-IM - page 62
62 Button Functions This feature will help you adjust the picture you are watching to give you the best possible picture quality . Aspect FULL NA TIVE - This ratio displays 100% of the ratio. Normally , all aspects except for Full Native display about 95%. Aspect Ratios P ANORAMA - With this ratio a normal 4:3 aspect picture is stretched to fit the ...
-
JVC 0807TNH-II-IM - page 63
63 Button Functions When you change the aspect ratios, it is different from their broadcast or recorded program. Aspect Ratios (Continued) Press the A SPECT button • By pressing the A SPECT button, you can change the size. ASPECT P ANORAMA CINEMA FULL REGULAR ASPECT P ANORAMA ZOOM CINEMA ZOOM FULL SLIM Notes: • Y ou can also choose the size by ...
-
JVC 0807TNH-II-IM - page 64
64 Button Functions By pressing the S OUND button, you can change the sound mode of the MaxxAudio function. The sound mode has four settings (HIGH, MID, LOW and OFF). Press the S OUND button π † T o MaxxAudio √ ® T o choose HIGH, MID, LOW or OFF Press the M ENU when finished Sound SOUND EFFECT OPERA TE EXIT MENU MaxxAudio MID Note: • T o se ...
-
JVC 0807TNH-II-IM - page 65
65 Button Functions The V IDEO S T ATUS button gives you a choice of TV picture display settings, including a display of your own preferences. Every input (TV , V1 - V5) can use the Video Status Mode. ST ANDARD - Resets the picture display to the factory settings. DYNAMIC - Gives a vivid picture with better contrast when viewing in a brightly lit r ...
-
JVC 0807TNH-II-IM - page 66
66 Button Functions The Sleep T imer can turn the TV off for you after you fall asleep. Program it to work for a total time of up to 180 minutes. At first, select TV mode to use the sleep timer function. Press the S LEEP button Sleep Timer Message 60 seconds before the automatic shutoff, this message will appear: Y ou then have 60 seconds to press ...
-
JVC 0807TNH-II-IM - page 67
67 Button Functions T win Activate the split-screen option by pressing T WIN on the remote control. The channel (or input) you were watching before pressing T WIN will appear on the left, the new channel will appear on the right. The sound will continue to come from the main screen channel (or input). T o turn split-screen off and return to normal ...
-
JVC 0807TNH-II-IM - page 68
68 Button Function Freeze With SELECT , you can select the picture (channel) while viewing TWIN screen. When you press S ELECT button, the channel number on the top will be highlighted. Each press of S ELECT will shift the channel. At first, select TV mode to use the Select function. Select Pressing the F REEZE button causes the screen to change to ...
-
JVC 0807TNH-II-IM - page 69
69 Remote Programming Cable Set T op Box Cable/PVR Combination Satellite Set T op Box DBS/PVR Combination VCR, DBS/PVR Combination PVR, DVD/PVR Combination DVD Player , DVD Recorder Home Theater in Box Amplifier , Home Theater in Box, Receiver Power on/off, Channel up/down, V olume up/down, Number 0 - 9, Tune, Return+/ TV , Muting, Favorite Channel ...
-
JVC 0807TNH-II-IM - page 70
70 Remote Programming ABC Americast Bell South Digeo Director General Instrument GoldStar Hamlin Jerrold Memorex Motorola Pace Panasonic Paragon Philips Pioneer Pulsar Quasar Regal Runco Samsung Scientific Atlanta Sony Starcom Supercable T orx T oshiba Zenith Americast Digeo General Instrument Jerrold Motorola Pace Pioneer Scientific Atlanta Sony S ...
-
JVC 0807TNH-II-IM - page 71
71 Remote Programming ABS Admiral Adventura Aiko Aiwa Akai Alienware America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Daytron Dell Denon DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex Emerson 1972 0048, 0209 0000 0 ...
-
JVC 0807TNH-II-IM - page 72
72 Remote Programming VCR VCR VCR mode Philips Pilot Pioneer Polk Audio Portland Presidian Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RadioShack Radix Randex RCA Realistic ReplayTV Ricavision Runco Samsung Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Singer Sonic Blue Sony Stack 9 STS Sylvania 0035, 0081, 0000, 0563, 0593, 0618, ...
-
JVC 0807TNH-II-IM - page 73
73 Remote Programming DVD DVD DVD mode Accurian Advent Aiwa Akai Alco Allegro Apex Digital Arrgo Aspire Digital Audiovox Blaupunkt Blue Parade Broksonic Cinea Cine Vision Citizen Coby Craig Curtis Mathes CyberHome Daewoo Denon Disney Durabrand DVD2000 Emerson Enterprise ESA Fisher Funai Gateway GE Go Video GoldStar Greenhill Harman/Kardon Hitachi H ...
-
JVC 0807TNH-II-IM - page 74
74 Remote Programming Amstrad Bose Curtis Mathes Durabrand GE Harman/Kardon JVC Left Coast Lenoxx Linn Marantz NEC Optimus Philips Pioneer Polk Audio RCA Shure Sony Soundesign Victor War d s Y amaha ADC Aiwa Akai Alco Amphion Media Works AMW Anam Apex Digital Audiotronic Audiovox Bose Brix Cambridge Soundworks Capetronic Carver Classic Coby Criteri ...
-
JVC 0807TNH-II-IM - page 75
75 OSD Information This OSD appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal Weak Signal 0 It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen. It moves automatically every two seconds ...
-
JVC 0807TNH-II-IM - page 76
76 T roubleshooting Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television. There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines a ...
-
JVC 0807TNH-II-IM - page 77
77 T roubleshooting PROBLEMS CHECK Static electricity Y ou hear occasional crackling sounds • It is normal to feel static electricity if you brush or touch the screen. • It is normal for the TV to make crackling sounds when first turned on or off. Unless the sound or picture become abnormal, this is fine. It does not operate correctly • Press ...
-
JVC 0807TNH-II-IM - page 78
78 Specifications LCD Flat T elevision T ype Reception Format Power Source Power Consumption Model NTSC, BTSC System (Multi-Channel Sound) ATSC T errestrial, Digital Cable AC 120V , 60 Hz Screen Size Speakers Audio Output 10W + 10W Antenna T erminal (VHF/UHF , A TSC/DIGIT AL CABLE IN) 75 ohms (VHF/UHF)(F-type connector) Refer to "unpacking you ...
-
JVC 0807TNH-II-IM - page 79
79 ...
-
JVC 0807TNH-II-IM - page 80
80 ...
-
JVC 0807TNH-II-IM - page 81
81 Notes ...
-
JVC 0807TNH-II-IM - page 82
82 Notes ...
-
JVC 0807TNH-II-IM - page 83
83 Notes ...
-
JVC 0807TNH-II-IM - page 84
84 Notes ...
-
JVC 0807TNH-II-IM - page 85
85 Notes ...
-
JVC 0807TNH-II-IM - page 86
86 Notes ...
-
JVC 0807TNH-II-IM - page 87
87 Notes ...
-
JVC 0807TNH-II-IM - page 88
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 ...
Do you have a question concerning JVC 0807TNH-II-IM?
Use the form below
If you did not solve your problem by using a manual JVC 0807TNH-II-IM, ask a question using the form below. If a user had a similar problem with JVC 0807TNH-II-IM it is likely that he will want to share the way to solve it.