English dropdown-ico

Manual Delkin Devices EI - 25-1

44 pages 1.31 mb
Download

Go to site of 44

Summary
  • Delkin Devices EI - 25-1 - page 1

    INSTALLER: Please leave this manual with the appliance owner for futur e reference. NOT FOR USE WITH SOLID FUEL 200-0215 FEBRUARY 2005 EUR O 25 EUR O 25 - - 1 1 Vented Gas F ireplace Insert Heating Appliance For use with natural gas or propane* Do not store or use gasoline or othe r flammable vapors and liquids in the vicinity of this or any other ...

  • Delkin Devices EI - 25-1 - page 2

    ...

  • Delkin Devices EI - 25-1 - page 3

    Congratulations on purchasing the Archgard Euro-25 Gas Fireplace Insert Heater! The Euro-25 is one of the most advanced gas he ating appliances on the market. It is designed using the latest technology and manu factured to the highest quality. Some of the many features of the Euro 25 are: Realistic Flames Three-dimensional flames similar to a real ...

  • Delkin Devices EI - 25-1 - page 4

    EUR O 25 -1 4 5.08: M odifications to NFPA-54, Ch apter 10 (2) Revise 10.8.3 by adding the following additional re quir ements: (a) For all side wall horizontally vented ga s fueled equipment installed in every dwe lling, building or structure used in whole or in par t for residential purposes, including those owne d or operated by the Commonwealth ...

  • Delkin Devices EI - 25-1 - page 5

    T ABLE OF CONTENTS Caution & Safety Information 5 General Information 6 Appliance Description and Dimensions 7 Installation Instructions 8 Operation Instructions 20 Maintenance 22 Troubleshooting Instructions 23 Servicing 25 APPENDIX A - Installation Into Vented Gas Fireplaces 28 Suitable Host Fireplaces / Specifi c Installation Instructions 32 ...

  • Delkin Devices EI - 25-1 - page 6

    EUR O 25 -1 6 Due to high temperatures, the appliance should be located out of traffic and aw ay from furniture and draperies. Children and adults should be alerted to th e hazards of high surface temperature and stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the applia ...

  • Delkin Devices EI - 25-1 - page 7

    EUR O 25 -1 7 GENERAL INFORMA TION This appliance is tested and certified to the follo wing U.S. and Canadian gas appliance standards. - ANSI Z 21.88b-2003 / CSA 2.33b-20 03, Vented Gas Fireplace Heater - CAN/CGA-2.17-M91, Gas-Fired Appliances for Use at High Altitudes. Please contact Archgard Industries Ltd., if you have any questions regarding th ...

  • Delkin Devices EI - 25-1 - page 8

    EUR O 25 -1 8 APPLIANCE DESCRIPTION & DIMENSIONS GAS VALVE CONVECTION FAN SPEED CONTROL TOP LOUVERS BAY GLASS DOOR REMOVABLE CONTROL COVER SURROUND FRONT VIEW SPARKER APPLIANCE DIMENSIONS A B I K J A 30 ¼ ” (768 mm) B 23” (584 mm) C 15 ¼ ” (387 mm) D 11 ¼ ” (286 mm) E 4” (102 mm) F 19 ¼ ” (489 mm) G 5” (127 mm) H 5 ¾ ” (146 ...

  • Delkin Devices EI - 25-1 - page 9

    EUR O 25 -1 9 Leveling leg INST ALLA TION INSTRUCTIONS CLEARANCES TO COMBUSTIBLES Combustible mantle allo wed in shaded area. Mantle extension ma y be increased 1” (25 mm) for each ad ditional 1” (25 mm) increase in clearance height. Minimum Height From Bottom of Appliance: 36” (915 mm) CAUTION: This appliance is designed for use in any m a s ...

  • Delkin Devices EI - 25-1 - page 10

    EUR O 25 -1 10 MINIMUM MASONRY FIREPLAC E DIMENSIONS 17” (432 mm) 25” (635 mm) 12” (305 mm) TOP VIEW The standard flue ad apter will fit if X is more than 5 ¾ ”. I t will also fi t if X is less than 5 ¾ ” bu t Y is higher than 8” (See ‘Flue conn ec tor, offset vent’ diagram) 19 ½ ” (495 mm ) SIDE VIEW X Y Z Flue connector strai ...

  • Delkin Devices EI - 25-1 - page 11

    EUR O 25 -1 11 INST ALLA TION INSTRUCTIONS - Continued Flue connector straight-up vent Flue connector offset vent Flue connector straight-up vent Flue connector offset vent MINIMUM ZERO-CLE ARANCE WOOD BURNING FI REPLACE DIMENSI ONS 17” (432 mm) 25” (635 mm) 12” (305 mm) TOP VIEW 15 ¼ ” (387 mm ) X Y Z SIDE VIEW The standard flue ad apter ...

  • Delkin Devices EI - 25-1 - page 12

    EUR O 25 -1 12 PRECAUTIONS • This appliance must be installed by a qualified gas installer and the installation must conform to the installation codes. • This appliance needs fresh air for safe operation a nd must be installed so there are provisions for adequate combustion and ventilati on air. Provide adequate clearance around air openings of ...

  • Delkin Devices EI - 25-1 - page 13

    EUR O 25 -1 13 GAS CONNECTIONS Have your gas supplier or a qualified gas fitter run a gas supply line to the gas fireplace. The line must be properly sized and fitted according to the installati on codes. Up stream of the suppl y connection, the fitter shall provide an accessible manual shut-off valve. CAUTION: The appliance and its individual shut ...

  • Delkin Devices EI - 25-1 - page 14

    EUR O 25 -1 14 ATTACHMENT OF FIREPLACE SURROUND The surround has four hooks that clip onto the si des of the appliance. Make sure the surround sits evenly with the front of the fireplace. Af ter the surround is properly installed, th e bottom edge of the centre sectio n of the surround is about ¾ ” from the top of the appliance. THE SPILL SWITCH ...

  • Delkin Devices EI - 25-1 - page 15

    EUR O 25 -1 15 GLASS DOOR WARNING: Glass door is fragile. Do not strike or a buse glass. Do not ope rate appliance with broken glass. Do not attempt to fix a broken glass door. It must be replaced with an identical one from the manufacturer. Do not attem pt to re move the glass door when the appliance is hot. Removing the Glass Door Remove the louv ...

  • Delkin Devices EI - 25-1 - page 16

    EUR O 25 -1 16 WARNING : Do not place the embers directly on the burner ports. A fire, explosion or excessive carbon monoxide (CO) may result, causing property damage, personal injury or loss of life. Do not add more or different materials to the burner than the amount and type supplied with the unit. LOG PLACEMENT WARNING: Do not place the logs or ...

  • Delkin Devices EI - 25-1 - page 17

    EUR O 25 -1 17 STEP 2 - Locate log #136 and place onto rear log suppor t using locator pins and pre-drilled holes in log. Log will sit as shown in the photo below. PINS FOR LOG # 136 STEP 3 - Locate log #137 and place onto the left side of the burner using locator pins and pre-drilled holes in log. Lo g will sit as shown in photo below. PIN HOLES F ...

  • Delkin Devices EI - 25-1 - page 18

    EUR O 25 -1 18 STEP 4 - Locate log #140 and place onto centre of burner using the locator pins and pre-drilled holes in log. Log should sit as shown in photo below. PIN HOLES FOR LOG # 140 STEP 5 - Locate log #141 and place onto right side of burner using the locator pins and pre-drilled holes in log. Log should sit as shown in photo below. PIN HOL ...

  • Delkin Devices EI - 25-1 - page 19

    EUR O 25 -1 19 STEP 6 - Locate log #135 and place onto rear log using the locator pins and pre-drilled holes in log. Log should sit as shown in photo below. PIN HOLE FOR LOG # 135 STEP 7 - Locate log #139 and place onto rear log using the locator pins and pre-drilled holes in log. Log should sit behind right grate ti ne as shown in photo below. PIN ...

  • Delkin Devices EI - 25-1 - page 20

    EUR O 25 -1 20 STEP 8 - Locate log #138 and place onto rear log using the locator pins and pre-drilled holes in log. Log should sit behind left grate tine as shown in photo below. FINAL LOG PLACEMENT - Please note that all logs should be placed exactly as shown. PIN HOLE FOR LOG # 138 LOG PLACEMENT - Continued ...

  • Delkin Devices EI - 25-1 - page 21

    EUR O 25 -1 21 OPERA TION INSTRUCTIONS FOR YOUR SAFETY, READ BEFORE LIGHTING WARNING : If you do not follow these instructions exactly, a fire or explosion may result, causing property damage, pe rsonal injury or loss of lif e. This appliance has a pilot which must be lit by hand using the sparker located next to the appliance valve controls. W hen ...

  • Delkin Devices EI - 25-1 - page 22

    EUR O 25 -1 22 Set the thermostat, if present, to the lowest level. Set the flame adjustm ent knob to the HI position. Press slightly and tu rn the control knob clockwise 3 to the OFF position and wait 5 minutes; thus allowing any gases to escap e which may have accumulated in the combustion chamber. Note: LP gases do not vent upward. Then follo w ...

  • Delkin Devices EI - 25-1 - page 23

    EUR O 25 -1 23 MAINTENANCE CAUTION : Maintenance should only be c onducted on a cold appliance. The exterior painted surfaces, gl ass and gold trims may be cleaned with a soft, non-abrasive cloth and water or a suitable , mild, non-abrasive cleaner. Regularly: • Clean and remove any lint accumulations or debris from the grills and in any combusti ...

  • Delkin Devices EI - 25-1 - page 24

    EUR O 25 -1 24 TROUBLESHOOTING SYMPTOM ACTION Pilot will not light after pressing the sparker m any times. 1. When lighting the appliance for the first time after installation or after servicing , th ere is air in the gas line. It takes a while for all the air to purge out of the pilot before gas can reach the pilot and ign ite. Remove the glass do ...

  • Delkin Devices EI - 25-1 - page 25

    EUR O 25 -1 25 TROUBLESHOOTING - Continued SYMPTOM ACTION The main burner does not turn on with the pilot lit. (continued ) 3. If using an optional t hermostat, check t o make sure t he therm ostat is set high enough to turn on the appliance. 4. If using an optional remote switch, check that the remote switch or the thermostat is turned on. 5. Chec ...

  • Delkin Devices EI - 25-1 - page 26

    EUR O 25 -1 26 SER VICING Before servicing, read the terms and conditions of the Archgard warranty at the back of the manual. Contact the Archgard authorized dealer from which you have pur chased the appliance and provide him with details of the problem and the installation inform ation which the installer has filled out at the back of this m anual ...

  • Delkin Devices EI - 25-1 - page 27

    EUR O 25 -1 27 REPLACEMENT OF FAN • Disconnect the power to the appliance. • Re move the louvers, control cover do or, brick panels, logs and burner. • Re move the firebox lower back. Remove the screws located at the back of the firebox. Take the lower firebox back out. Be careful not to da mage the gasket. The fan is now visible. • Use a 1 ...

  • Delkin Devices EI - 25-1 - page 28

    EUR O 25 -1 28 REPLACING MAJOR GAS COMPONENT S • Remove the glass door, log set and the burner. • Use a ½ ” wrench to loosen the orifice. • Change the orifice. • Attach the new orifice. • Replace the burner and the log set. • Test fire the appliance with the gl ass door off and check for gas leaks. • Replace the glass door. If any ...

  • Delkin Devices EI - 25-1 - page 29

    EUR O 25 -1 29 APPENDIX A EURO 25-1 - INSTRUCTIONS FOR INSTALLATION INTO VE NTED GAS FIREPLACES PRECAUTIONS • This installation must be conducted by a qualified gas applia nce installer and the installation must conform to the installation codes. • This EURO 25-1 gas insert will only fit into the gas fireplaces on Archgard’s list of suitable ...

  • Delkin Devices EI - 25-1 - page 30

    EUR O 25 -1 30 HOST GAS FIREPLACE PREPARATION • The following procedures must be conducted by a qualifie d gas appliance installer. • Double check the minimum firebox dimensions. • Disconnect electrical power and gas supply. • Remove the burner or sandpan, pilot, a nd all parts of the gas train assembly. • Attach the Archgard modification ...

  • Delkin Devices EI - 25-1 - page 31

    EUR O 25 -1 31 VENTING OF THE EURO- 25-1 IN SIDE THE HOST GAS FIREPLACE A connector kit (BCV4-KIT or BCV5-KIT ) is used to connect the EURO 25-1 insert to the host gas fireplace’s venting system. The connector slips into the host fireplace’s B-vent. • Follow the connector kit’s instru ctions in assembling the kit. • Remove the flue adapte ...

  • Delkin Devices EI - 25-1 - page 32

    EUR O 25 -1 32 W ARNING : This fireplace has been modified for use with the Archgard EURO-25-1 gas insert. Usage without the EURO-25-1 gas insert may cause property damage, personal injury or loss of life. SAMPLE MODIFICA TION W ARNING PLA TE 303-0050 W ARNING : This fireplace has been modified for use with the Archgard EURO-25-1 gas insert. Usage ...

  • Delkin Devices EI - 25-1 - page 33

    EUR O 25 -1 33 INSTALLATION INSTRUCTIONS INSTALLING THE EURO 25-1 GAS FIREPL ACE INSERT HEATING APPLIANCE INTO VENTED ZERO-CLEARANCE GAS FIREPLACE: CANADIAN HEATING PRODUCT MODEL MONTIGO 28 SERIES 1. Remove the louvers and screens or glass door. 2. Remove the burner/sandpan assembly, valve and pilot assem bly from the firebox bottom plate. Leave th ...

  • Delkin Devices EI - 25-1 - page 34

    EUR O 25 -1 34 1. Unhook the screen rod at the center and remove screens or glass door. 2. Unscrew and remove the front trim st rip at the front of the firebox bottom. 3. Remove the burner/sandpan assembly, valve and pilot assem bly from the firebox bottom plate. Leave the plate in pl ace to support the gas insert. 4. Bend the front deflector plate ...

  • Delkin Devices EI - 25-1 - page 35

    EUR O 25 -1 35 1. Remove the screens and rod or glass door. 2. Remove the bottom door track. 3. Remove the pilot and valve assembly. 4. Cut the front legs of sandpan with an ab rasive cutting disc or plasma cutter. Bend up sandpan to expose rear legs. Cut rear legs. Cu t legs as close to the bottom as possible. 5. Cut out the top front baffle as sh ...

  • Delkin Devices EI - 25-1 - page 36

    EUR O 25 -1 36 1. Remove the louvers and screens or glass door. 2. Remove the burner/sandpan assembly, valve and pilot assem bly from the firebox bottom plate. Flip the plate over and leave the plate in place to suppo rt the gas insert. 3. Remove the facing cross members with an abrasive cutting disc or plasma cutter. 4. Remove the front top baffle ...

  • Delkin Devices EI - 25-1 - page 37

    EUR O 25 -1 37 1. Remove the screens or glass door. 2. Remove the burner assembly. (two 5/16” Hex screws at the back) 3. Remove the brick panels. 4. Remove the front top deflector. (f our 5/16” Hex scre ws at the top) 5. Remove the valve tray. (two Philips s crews on the sides) 6. Remove the bottom glass door clips. (two Philips screws) 7. The ...

  • Delkin Devices EI - 25-1 - page 38

    EUR O 25 -1 38 IMPOR T ANT INFORMA TION * Please have the installer fill out the installa tion information for warranty and future reference. NAME ADDRESS CITY STATE / PROV COUNTRY ZIP / POS TAL CODE PHONE NUMBER COMPANY NAME ADDRESS PHONE NUMBER COMPANY NAME ADDRESS PHONE NUMBER APPLIANCE MODEL NUMBER EURO-25-1 SERIAL NUMBER GAS TYPE  NATURAL G ...

  • Delkin Devices EI - 25-1 - page 39

    This Limited Warranty is made by ARCHGARD INDUSTRIES LTD., hereinafter referred to as “Archgard”. Archgard warrants to the original purchaser of an Ar chgard gas burning fireplace (s) th at the product will be free of defe cts in materials and workmansh ip under normal use and service, for a “lifetim e”. INCLUSIONS: “LIFETIME LIMITED WARR ...

  • Delkin Devices EI - 25-1 - page 40

    EUR O 25 -1 40 Parts can be ordered through your lo cal dealer or distributor by giving ITEM # and DESCRIPTION. REPLACEMENT P A R TS FOR EURO 25-1 ITEM # DESCRIPTION QTY. UNIT 200-0215 OWNER’S MANUAL 1 EA 301-0068 ORIFICE, CAP #45 ( NATURAL GA S) 1 EA 301-0060 ORIFICE, CAP #55 (PRO PANE) 1 EA 305-0013 SPEED CONTROL, c/ w PALE NUT & KNOB, 120V ...

  • Delkin Devices EI - 25-1 - page 41

    EUR O 25 -1 41 NOTES ...

  • Delkin Devices EI - 25-1 - page 42

    POSTAGE FOLD DOWN AT LINE FOLD DOWN AT LINE & TAPE CLOSE D CUT ALONG LINE CUT ALONG LINE CUT ALONG LINE Model # : EURO 25 -1 Serial #: Date Installed: / / Name: Address: City: State/Prov: ZIP: Phone: ( _____ ) Dealer's Name & Address: City: State/Prov: ZIP: Phone: ( _____ ) Installer's Name & Address: City: State/Prov: ZIP: Ph ...

  • Delkin Devices EI - 25-1 - page 43

    ...

  • Delkin Devices EI - 25-1 - page 44

    Ar c hgard Industries Ltd. 7116 Beatty Drive Mission, B.C. V2V 6B4 Canada Website: www.archgard.com ...

Manufacturer Delkin Devices Category Indoor Fireplace

Documents that we receive from a manufacturer of a Delkin Devices EI - 25-1 can be divided into several groups. They are, among others:
- Delkin Devices technical drawings
- EI - 25-1 manuals
- Delkin Devices product data sheets
- information booklets
- or energy labels Delkin Devices EI - 25-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Delkin Devices EI - 25-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Delkin Devices EI - 25-1, service manual, brief instructions and user manuals Delkin Devices EI - 25-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Delkin Devices EI - 25-1.

Similar manuals

A complete manual for the device Delkin Devices EI - 25-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Delkin Devices EI - 25-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Delkin Devices EI - 25-1.

A complete Delkin Devices manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Delkin Devices EI - 25-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Delkin Devices EI - 25-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Delkin Devices EI - 25-1, that we can find in the current document
3. Tips how to use the basic functions of the device Delkin Devices EI - 25-1 - which should help us in our first steps of using Delkin Devices EI - 25-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Delkin Devices EI - 25-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Delkin Devices EI - 25-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Delkin Devices EI - 25-1?

Use the form below

If you did not solve your problem by using a manual Delkin Devices EI - 25-1, ask a question using the form below. If a user had a similar problem with Delkin Devices EI - 25-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)