English dropdown-ico

Manual Cisco PA-FE-FX

64 pages 1.52 mb
Download

Go to site of 64

Summary
  • Cisco PA-FE-FX - page 1

    170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Cisco Systems, Inc. Corporate Headquarters Tel: 800 553-NETS (6387) 408 526-4000 Fax: 408 526-4100 P A-FE-TX and P A-FE-FX F ast Ether net 100BaseT P or t Adapter Installation and Configur ation Product Numbers: P A-FE-TX(=) and P A-FE-FX(=) Platf or ms Suppor ted: Cisco 7200 Se ...

  • Cisco PA-FE-FX - page 2

    Access Registrar, AccessPath, Any to Any, AtmDirector, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo, Cisco Certified Internetwork Expert logo, CiscoLink , the Cisco Management Connection logo, the Cisco Net Works logo, the Cisco Powered Network logo, Cisco Systems Capital, the Cisco Systems Capital logo, Cisco Systems Networking ...

  • Cisco PA-FE-FX - page 3

    Preface v Pref ace This preface explains the objecti v es and organization of this document and ho w to find additional information on related products and services. This preface contains the follo wing sections: • Objectiv es, page v • Organization, page vi • Related Documentation, page vi • Cisco Connection Online, page viii • Cisco Do ...

  • Cisco PA-FE-FX - page 4

    Organization vi PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration Organization This document is organized into the follo wing chapters: Related Documentation Y our router and the Cisco IOS software running on it contain extensi ve features and functionality , which are documented in the following resources: ? ...

  • Cisco PA-FE-FX - page 5

    Preface vii Related Documentation • For hardware installation and maintenance information on Cisco 7100 series routers, refer to the Cisco 7100 Series VPN Router Installation and Configuration Guide publication that shipped with your Cisco 7100 series router . • For information on setting up a V irtual Priv ate Network, see the Cisco 7100 Seri ...

  • Cisco PA-FE-FX - page 6

    Cisco Connection Online viii PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration Cisco Connection Online Cisco Connection Online (CCO) is Cisco Systems’ primary , real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services. A vailable 24 ...

  • Cisco PA-FE-FX - page 7

    CHAPTER Overview 1-1 1 Ov er vie w This chapter provides physical and functional o vervie ws of the P A-FE-TX and P A-FE-FX Fast Ethernet 100BaseT port adapters. The chapter contains the following sections: • Port Adapter Overvie w , page 1-1 • Port Adapter Locations on the Supported Platforms, page 1-2 • LEDs, page 1-5 • Receptacles, Cable ...

  • Cisco PA-FE-FX - page 8

    Port Adapter Locations on the Supported Platforms PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 1-2 Figure 1-2 P A-FE-FX Port Adapter—Faceplate Vie w The P A-FE can be installed in the following slots on the hardware platforms described in this document: • VIP2—Port adapter slot 0 and port adapter sl ...

  • Cisco PA-FE-FX - page 9

    Overview 1-3 Port Adapter Locations on the Supported Platforms Figure 1-4 VIP2-50 with T wo P or t Adapters Installed—Horizontal Orientation In Cisco 7200 series routers, port adapter slots are numbered from the lower left to the upper right, beginning with port adapter slot 1 and continuing through port adapter slot 2 for the Cisco 7202, slot 4 ...

  • Cisco PA-FE-FX - page 10

    Port Adapter Locations on the Supported Platforms PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 1-4 Figure 1-5 P ort Adapter Slots in the Cisco 7200 Series—Cisco 7206 Figure 1-6 shows a Cisco uBR7200 series router with port adapters installed. In the Cisco uBR7246, port adapter slot 1 is in the upper lef ...

  • Cisco PA-FE-FX - page 11

    Overview 1-5 LEDs LEDs The P A-FE-TX and the P A-FE-FX hav e an enabled LED, standard on all port adapters, and a bank of three status LEDs for the ports. After system initialization, the enabled LED goes on to indicate that the P A-FE has been enabled for operation. (The LEDs are shown in Figure 1-7.) Figure 1-7 LEDs on the P A-FE Port Adapter—P ...

  • Cisco PA-FE-FX - page 12

    Receptacles, Cables, and Pinouts PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 1-6 Figure 1-8 shows the RJ-45 cable connectors. Cisco Systems does not supply Category 5 UTP RJ-45 cables; these cables are av ailable commercially . T able 1-1 lists the pinouts and signals for the P A-FE-TX RJ-45 connectors. ...

  • Cisco PA-FE-FX - page 13

    Overview 1-7 Receptacles, Cables, and Pinouts Figure 1-10 Crosso ver Cable Pinout—P A-FE-TX RJ-45 Connections Between Hubs and Repeaters Figure 1-11 shows the duple x SC connector (one required for both transmit and receiv e), and Figure 1-12 shows the simplex SC connector (two required, one for each transmit and recei ve) used for P A-FE-FX opti ...

  • Cisco PA-FE-FX - page 14

    Receptacles, Cables, and Pinouts PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 1-8 Figure 1-13 P A-FE-TX or P A-FE-FX MII Connection—Receptacle T able 1-2 lists the MII connector pinout and signals. MII cables are av ailable commercially and are not av ailable from Cisco Systems. T able 1-2 refers to MII ...

  • Cisco PA-FE-FX - page 15

    Overview 1-9 Fast Ethernet Overview F ast Ethernet Overview The term Ethernet is commonly used for all carrier sense multiple access collision detect (CSMA/CD), LANs that generally conform to Ethernet specifications, including Fast Ethernet under IEEE 802.3u. Note 100BaseTX is intended for En vironment A, and 100BaseFX is intended for En vironment ...

  • Cisco PA-FE-FX - page 16

    IEEE 802.3u 100BaseT Specifications PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 1-10 IEEE 802.3u 100BaseT Specifications T able 1-3 lists the cabling specifications for 100-Mbps Fast Ethernet transmission over UTP , FTP , and fiber-optic cables. T able 1-4 summarizes IEEE 802.3u 100BaseT physical char ...

  • Cisco PA-FE-FX - page 17

    CHAPTER Preparing for Installation 2-1 2 Prepar ing f or Installation This chapter describes the general equipment, safety , and site preparation requirements for installing the P A-FE-TX and P A-FE-FX Fast Ethernet port adapters. The chapter contains the follo wing sections: • List of Parts and T ools, page 2-1 • Software and Hardware Requirem ...

  • Cisco PA-FE-FX - page 18

    Software and Hardware Requirements PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 2-2 Software and Har dware Requirements T able 2-1 lists the minimum Cisco IOS software release required to use the P A-FE-TX and P A-FE-FX in supported router platforms. T able 2-1 P A-FE-TX and P A-FE-FX Software Requirement ...

  • Cisco PA-FE-FX - page 19

    Preparing for Installation 2-3 Safety Guidelines Caution The VIP2 requires that Cisco 7000 series routers hav e the RSP7000 and RSP7000CI installed. The VIP2 will not operate properly with the Route Processor (RP), Switch Processor (SP), or Silicon Switch Processor (SSP) installed in a Cisco 7000 series router . Safety Guidelines Follo wing are saf ...

  • Cisco PA-FE-FX - page 20

    Safety Guidelines PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 2-4 La traduzione delle avv ertenze riportate in questa pubblicazione si trov a nel documento Re gulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositiv o. Adv arsel D ...

  • Cisco PA-FE-FX - page 21

    Preparing for Installation 2-5 Preventing Electrostatic Discharge Damage • Ne ver touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. Pre v enting Electrostatic Discharge Damage Electrostatic discharge (ESD) damage, w ...

  • Cisco PA-FE-FX - page 22

    FCC Class B Compliance PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 2-6 FCC Class B Compliance The equipment described in this document generates and may radiate radio-frequency ener gy . If it is not installed in accordance with Cisco’ s installation instructions, it may cause interference with radio a ...

  • Cisco PA-FE-FX - page 23

    CHAPTER VIP2 and the PA-FE Port Adapters 3-1 3 VIP2 and the P A-FE P or t Adapters This chapter provides information on the P A-FE-TX and the P A-FE-FX port adapters and their use in the VIP2 in Cisco 7000 series and Cisco 7500 series routers. This chapter contains the follo wing sections: • Installation Overvie w , page 3-1 • Removing a Port A ...

  • Cisco PA-FE-FX - page 24

    Installation Overview PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 3-2 The P A-FE-TX and P A-FE-FX can be installed in either port adapter slot 0 or port adapter slot 1 on the VIP2. Figure 3-1 shows a P A-FE-TX installed in port adapter slot 0 on a VIP2-15 or VIP2-40. Figure 3-2 shows a P A-FE-FX installe ...

  • Cisco PA-FE-FX - page 25

    VIP2 and the PA-FE Port Adapters 3-3 Installation Overview Figure 3-2 VIP2-15 or VIP2-40 with a P A-FE-FX in Port Adapter Slot 0 Figure 3-3 shows a P A-FE-TX installed in port adapter slot 0 on a VIP2-50. Figure 3-4 shows a P A-FE-FX installed in port adapter slot 0 on a VIP2-50. Figure 3-3 VIP2-50 with an P A-FE-TX in Port Adapter Slot 0 H6453 0 F ...

  • Cisco PA-FE-FX - page 26

    Removing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 3-4 Figure 3-4 VIP2-50 with an P A-FE-FX in Port Adapter Slot 0 Remo ving a P or t Adapter Use the following standard procedure to remo ve a port adapter from a VIP2: Step 1 Attach an ESD-pre venti ve wrist strap between you and an unfi ...

  • Cisco PA-FE-FX - page 27

    VIP2 and the PA-FE Port Adapters 3-5 Removing a Port Adapter Step 4 Locate the scre w at the rear of the port adapter (or blank port adapter) to be replaced. (See Figure 3-5.) This scre w secures the port adapter (or blank port adapter) to its slot. Figure 3-5 Location of P ort Adapter Screw—Partial P ort Adapter Step 5 Remov e the screw that sec ...

  • Cisco PA-FE-FX - page 28

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 3-6 Installing a P or t Adapter Use the following standard procedure to install a port adapter on a VIP2: Step 1 Attach an ESD-pre venti ve wrist strap between you and an unfinished chassis surface. W arning During this procedure, wea ...

  • Cisco PA-FE-FX - page 29

    VIP2 and the PA-FE Port Adapters 3-7 Installing a Port Adapter Step 4 Carefully slide the ne w port adapter into the port adapter slot until the connector on the port adapter is completely seated in the connector on the motherboard. Step 5 Replace the scre w in the rear of the port adapter slot. (See Figure 3-5 for its location.) Do not ov ertighte ...

  • Cisco PA-FE-FX - page 30

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 3-8 ...

  • Cisco PA-FE-FX - page 31

    CHAPTER Cisco 7200 Series and the PA-FE Port Adapters 4-1 4 Cisco 7200 Ser ies and the P A-FE P or t Adapters This chapter provides information on the P A-FE-TX and P A-FE-FX port adapters and their use in the Cisco 7200 series routers. This chapter contains the following sections: • Installation Overvie w , page 4-1 • Removing a Port Adapter , ...

  • Cisco PA-FE-FX - page 32

    Removing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 4-2 Figure 4-1 Cisco 7206 with a P A-FE-TX in Slot 4 Figure 4-2 shows a Cisco 7206 with a P A-FE-FX installed in slot 4. Figure 4-2 Cisco 7206 with an P A-FE-FX in Slot 4 Note The P A-FE-FX has the MII connector like the P A-FE-TX, b ut ...

  • Cisco PA-FE-FX - page 33

    Cisco 7200 Series and the PA-FE Port Adapters 4-3 Removing a Port Adapter Figure 4-3 Placing the P ort Adapter Lever in the Unlocked P osition—Cisco 7206 Step 3 Grasp the handle on the port adapter and pull the port adapter from the midplane, about halfway out of its slot. If you are removing a blank port adapter , pull the blank port adapter com ...

  • Cisco PA-FE-FX - page 34

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 4-4 Installing a P or t Adapter Use the following procedure to install a ne w port adapter in a Cisco 7200 series router: Step 1 Attach an ESD-pre venti ve wrist strap between you and an unfinished chassis surface. W arning During thi ...

  • Cisco PA-FE-FX - page 35

    Cisco 7200 Series and the PA-FE Port Adapters 4-5 Installing a Port Adapter Figure 4-6 Placing the P ort Adapter Lever in the Locked P osition—Cisco 7206 This completes the procedure for installing a new port adapter in a Cisco 7200 series router . Proceed to Chapter 7, “Installing P A-FE Port Adapter Interface Cables, ” to connect the necess ...

  • Cisco PA-FE-FX - page 36

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 4-6 ...

  • Cisco PA-FE-FX - page 37

    CHAPTER Cisco uBR7200 Series and the PA-FE Port Adapters 5-1 5 Cisco uBR7200 Ser ies and the P A-FE P or t Adapters This chapter provides information on the P A-FE-TX and P A-FE-FX port adapters and their use in Cisco uBR7200 series univ ersal broadband routers. This chapter contains the follo wing sections: • Installation Overvie w , page 5-1 ? ...

  • Cisco PA-FE-FX - page 38

    Removing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 5-2 Figure 5-1 Cisco uBR7200 Series with a P A-FE-TX in Slot 2—Cisco uBR7246 Figure 5-2 shows a P A-FE-FX installed in slot 2 of a Cisco uBR7200 series router . Figure 5-2 Cisco uBR7200 Series with an P A-FE-FX in Slot 2—Cisco uBR724 ...

  • Cisco PA-FE-FX - page 39

    Cisco uBR7200 Series and the PA-FE Port Adapters 5-3 Removing a Port Adapter Figure 5-3 Placing the P ort Adapter Retention Clip in the Unlocked P osition—Cisco uBR7246 — For a Cisco uBR7223, place the port adapter lev er in the unlocked position. (See Figure 5-4.) Figure 5-4 Placing the P ort Adapter Lever in the Unlocked P osition—Cisco uBR ...

  • Cisco PA-FE-FX - page 40

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 5-4 Caution Always handle the port adapter by the carrier edges and handle; ne ver touch the port adapter’ s components or connector pins. (See Figure 5-5.) Figure 5-5 Handling a P ort Adapter Step 6 Place the port adapter on an anti ...

  • Cisco PA-FE-FX - page 41

    Cisco uBR7200 Series and the PA-FE Port Adapters 5-5 Installing a Port Adapter Figure 5-6 Aligning the P ort Adapter Metal Carrier Between the Slot Guides Step 4 W ith the metal carrier aligned in the slot guides, gently slide the port adapter halfway into the slot. Caution Do not slide the port adapter all the way into the slot until you hav e con ...

  • Cisco PA-FE-FX - page 42

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 5-6 Figure 5-7 Placing the P ort Adapter Retention Clip in the Locked P osition—Cisco uBR7246 For a Cisco uBR7223, place the port adapter lev er in the locked position. (See Figure 5-8.) Figure 5-8 Placing the P ort Adapter Lever in ...

  • Cisco PA-FE-FX - page 43

    CHAPTER Cisco 7100 Series and the PA-FE-TX and PA-FE-FX 6-1 6 Cisco 7100 Ser ies and the P A-FE-TX and P A-FE-FX This chapter provides information on the P A-FE-TX and P A-FE-FX port adapters and their use in Cisco 7100 series routers. This chapter contains the following sections: • Installation Overvie w , page 6-1 • Removing a Port Adapter , ...

  • Cisco PA-FE-FX - page 44

    Removing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 6-2 Figure 6-2 Cisco 7140 series Router—P ort Adapter Slot 4 Location Depending on your circumstances, you might need to install a new port adapter in a Cisco 7100 series router or replace a failed port adapter in the field. All port ...

  • Cisco PA-FE-FX - page 45

    Cisco 7100 Series and the PA-FE-TX and PA-FE-FX 6-3 Installing a Port Adapter Caution Always handle the port adapter by the carrier edges and handle; ne ver touch the port adapter’ s components or connector pins. (See Figure 6-3.) Figure 6-3 Handling a P ort Adapter Step 6 Place the port adapter on an antistatic surface with its components facing ...

  • Cisco PA-FE-FX - page 46

    Installing a Port Adapter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 6-4 Caution Do not slide the port adapter all the way into the slot until you hav e connected all required cables. T rying to do so disrupts normal operation of the router . Figure 6-4 Aligning the Single-Width P ort Adapter Between th ...

  • Cisco PA-FE-FX - page 47

    CHAPTER Installing PA-FE Port Adapter Interface Cables 7-1 7 Installing P A-FE P or t Adapter Interf ace Cab les T o continue your P A-FE-TX and P A-FE-FX port adapter installation, you must install the port adapter’ s interface cables. The following instructions apply to all supported platforms. This chapter contains the following sections: • ...

  • Cisco PA-FE-FX - page 48

    Attaching PA-FE Port Adapter Interface Cables PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 7-2 Note Each P A-FE-FX or P A-FE-TX can hav e either an MII attachment or an RJ-45 (or SC) attachment, but not both simultaneously . The MII and RJ-45 (or SC) receptacles represent two physical connection options f ...

  • Cisco PA-FE-FX - page 49

    Installing PA-FE Port Adapter Interface Cables 7-3 Attaching PA-FE Port Adapter Interface Cables Step 2 For the P A-FE-TX, attach the ferrite bead to the RJ-45 cable (at either end), as shown in Figure 7-3. Caution The ferrite bead prev ents electromagnetic interference (EMI) from affecting the P A-FE-TX-equipped system and is a required component ...

  • Cisco PA-FE-FX - page 50

    Attaching PA-FE Port Adapter Interface Cables PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 7-4 ...

  • Cisco PA-FE-FX - page 51

    CHAPTER Configuring PA-FE Port Adapter Interfaces 8-1 8 Configur ing P A-FE P or t Adapter Interf aces T o continue your P A-FE-TX and P A-FE-FX port adapter installation, you must configure the P A-FE-TX and P A-FE-FX interfaces. The follo wing instructions apply to all supported platforms. Minor differences between the platforms are noted. This ...

  • Cisco PA-FE-FX - page 52

    Using the EXEC Command Interpreter PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-2 Using the EXEC Command Interpreter Y ou modify the configuration of your router through the software command interpreter called the EXEC. Y ou must enter the privile ged le vel of the EXEC command interpreter (also called ...

  • Cisco PA-FE-FX - page 53

    Configuring PA-FE Port Adapter Interfaces 8-3 Note For the Cisco 7206VXR and Cisco 7206 router shelves, physical port addresses are composed of a three-part number in the format shelf number/port adapter slot number/interface port number , where the shelf number is a number assigned to the router shelf during the initial configuration of the Cisco ...

  • Cisco PA-FE-FX - page 54

    Identifying Chassis Slot, Port Adapter Slot, and PA-FE Interface Port Numbers PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-4 The indi vidual interface port numbers always be gin with 0. The number of additional ports depends on the number of ports on a port adapter . For example, if the P A-FE in slot 4 ...

  • Cisco PA-FE-FX - page 55

    Configuring PA-FE Port Adapter Interfaces 8-5 Note Although the processor slots in the sev en-slot Cisco 7000 and Cisco 7507 and thirteen-slot Cisco 7513 are vertically oriented and those in the fi ve-slot Cisco 7010 and Cisco 7505 are horizontally oriented, all models use the same method for slot and port numbering. Interface ports on the VIP2 ma ...

  • Cisco PA-FE-FX - page 56

    Performing a Basic Configuration PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-6 Figure 8-4 P ort Adapter Slot Numbering—Cisco 7120 Series Slots in the Cisco 7140 series are numbered as shown Figure 8-5. The fixed LAN interface is slot 0, the fixed W AN interfaces are slots 1 and 2, and the modular p ...

  • Cisco PA-FE-FX - page 57

    Configuring PA-FE Port Adapter Interfaces 8-7 Use the following sample basic configuration procedure: Step 1 At the pri vileged-le vel prompt, enter configuration mode and specify that the console terminal is the source of the configuration subcommands, as follows: Router# configure terminal Enter configuration commands, one per line. End with C ...

  • Cisco PA-FE-FX - page 58

    Performing a Basic Configuration PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-8 Configuring P A-FE T ransmission Mode Half-duplex operation is the def ault transmission mode for the P A-FE. Use the full-duplex command to configure full-duplex operation for the P A-FE as follows: Router# configure term ...

  • Cisco PA-FE-FX - page 59

    Configuring PA-FE Port Adapter Interfaces 8-9 T o check the interface configuration using show commands, proceed to the “Checking the Configuration” section on page 8-9. Chec king the Configuration After configuring the new interf ace, use the show commands to display the status of the ne w interface or all interfaces and the ping command t ...

  • Cisco PA-FE-FX - page 60

    Checking the Configuration PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-10 If the interface is do wn and you configured it as up, or if the displays indicate that the hardware is not functioning properly , ensure that the network interface is properly connected and terminated. If you still hav e proble ...

  • Cisco PA-FE-FX - page 61

    Configuring PA-FE Port Adapter Interfaces 8-11 cisco 7200 (R4700) processor with 22528K/10240K bytes of memory. R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache) Last reset from power-on Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Chassis Interface. 4 Ethernet/IEEE 802.3 interfaces. 2 FastEthernet/IE ...

  • Cisco PA-FE-FX - page 62

    Checking the Configuration PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-12 VIP2 Show Commands Use the show interfaces type slot/port-adapter/por t command, with ar guments such as the interface type (fastethernet, and so forth) and the port number (slot/port), to display information about a specific in ...

  • Cisco PA-FE-FX - page 63

    Configuring PA-FE Port Adapter Interfaces 8-13 Use the show diagb us slot command to determine which type of port adapter is installed on a VIP2 in your system. Specific port adapter information is displayed, as sho wn in the following e xample of a P A-FE-FX in interface processor slot 1: Router# show diagbus 1 Slot 1: Physical slot 1, ~physical ...

  • Cisco PA-FE-FX - page 64

    Checking the Configuration PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration 8-14 Follo wing is an example of a successful ping command to a remote server with the address 172.16.0.0: Router# ping 172.16.0.0 Type escape sequence to abort. Sending 5, 100-byte ICMP Echoes to 10.0.0.0, timeout is 2 seconds: !!!!! ...

Manufacturer Cisco Category Network Card

Documents that we receive from a manufacturer of a Cisco PA-FE-FX can be divided into several groups. They are, among others:
- Cisco technical drawings
- PA-FE-FX manuals
- Cisco product data sheets
- information booklets
- or energy labels Cisco PA-FE-FX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco PA-FE-FX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco PA-FE-FX, service manual, brief instructions and user manuals Cisco PA-FE-FX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco PA-FE-FX.

Similar manuals

A complete manual for the device Cisco PA-FE-FX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco PA-FE-FX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco PA-FE-FX.

A complete Cisco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco PA-FE-FX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco PA-FE-FX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco PA-FE-FX, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco PA-FE-FX - which should help us in our first steps of using Cisco PA-FE-FX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco PA-FE-FX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco PA-FE-FX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco PA-FE-FX?

Use the form below

If you did not solve your problem by using a manual Cisco PA-FE-FX, ask a question using the form below. If a user had a similar problem with Cisco PA-FE-FX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)