English dropdown-ico

Manual Intermec SR61THP

70 pages Not applicable
Download

Go to site of 70

Summary
  • Intermec SR61THP - page 1

    SR 61T T ethered Scanner User ’ s Guide ...

  • Intermec SR61THP - page 2

    ii SR61T Tethered Scanner User’s Guide Intermec T echnologies Corporation W orldwid e Headquarters 6001 36th Ave.W . Everett, W A 98203 U.S.A . www.intermec.com The information contained herei n is provided solely for the purpose of allowing customers to operate and service Intermec-manuf actured equipment and is no t to be released, reproduced, ...

  • Intermec SR61THP - page 3

    SR61T Tethered Scanner User’s Guide iii Document Change Record This page records changes to this document. The document was originally released as Revision 001. Ve r s i o n Number Date Description of Change 002 3/2009 Revised to support hardware and software for release 2. Updates included new cables and data transmission settings. 003 8/2010 Re ...

  • Intermec SR61THP - page 4

    iv SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 5

    Contents SR61T Tethered Scanner User’s Guide v Contents Document Change Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Before Y ou Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Safety Information . . . . . . . . ...

  • Intermec SR61THP - page 6

    Contents vi SR61T Tethered Scanner User’s Guide Hands-Free Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3 SR61T Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 USB Interface . . . . . . . . . . . . . ...

  • Intermec SR61THP - page 7

    Contents SR61T Tethered Scanner User’s Guide vii Upgrading the SR61T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Scanner Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 5 Cleaning the SR61T . . . . . . . . . . . ...

  • Intermec SR61THP - page 8

    Contents viii SR61T Tethered Scanner User’s Guide Before Y ou Begin This section provides you with safe ty inf ormation, technical support information, and sources f or additional product information. Safet y Inform ation Y our safety is extremely important. Read and follo w all warnings and cautions in this document before handling and operating ...

  • Intermec SR61THP - page 9

    Before You Begin SR61T Tethered Scanner User’s Guide ix Global Ser vices and Support W arrant y Information T o understand the warranty for yo ur Intermec product, visit the Intermec web site at www.intermec.com and click Support > Returns and Repair s > W arranty . Disclaimer of warranties: The sample code included in this document is pres ...

  • Intermec SR61THP - page 10

    Before You Begin x SR61T Tethered Scanner User’s Guide AW O O S y s t e m s 102-1304 SK V entium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact : Mr. Sinbum Kang T elephone: +82-31-436-1191 Email: mjyun@awoo.co.kr IN Information System PTD LTD 6th Floor Daegu V enture Center Bldg 95 Shinchun 3 Dong Donggu, Daegu City, K orea ...

  • Intermec SR61THP - page 11

    Before You Begin SR61T Tethered Scanner User’s Guide xi Patent Information Product is covered by one or more of the follo wing patents: 4,882,476; 4,894,523; 4,9 53,113; 4,970,379; 4,9 88,852; 5,019,699; 5,021,642; 5,038,024; 5,0 81,343; 5,095,197; 5,1 44,119; 5,144,121; 5,182,441; 5,187,355; 5,1 87,356; 5,216,233; 5,2 16,550; 5,218,191; 5,233,17 ...

  • Intermec SR61THP - page 12

    Before You Begin xii SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 13

    1 1 Introducing the SR61T This chapter provides an over view of the SR61T T ethered Scanner. This chapter covers these topics: • What is the SR61T T ethered Scanner • Supported Inter faces • Powering the SR61T • Connecting the Interface Cable • Removing the Int erface Cable • Accessories ...

  • Intermec SR61THP - page 14

    Chapter 1 — Introducing the SR61T 2 SR61T Tethered Scanner User’s Guide What is the SR61T T ethered Scanner The SR61T T ethered Scanner is a small, rugged handheld scanner. The SR61T is lightweight, ergonomically designed, and it interfaces seamlessly with Intermec computers and other host computers. SR61T T ethered Scanner The SR61T comes with ...

  • Intermec SR61THP - page 15

    Chapter 1 — Introducing the S R61T SR61T Tethered Scanner User’s Guide 3 SR61T Scan Engine Option: The scan engine option of your SR61T can be found in the first part of the co nfiguration number . In this illust ration, the scan engine option is SR61T2 D f or 2D linear imager . Supported Interfaces The SR61T supports the following interfaces: ...

  • Intermec SR61THP - page 16

    Chapter 1 — Introducing the SR61T 4 SR61T Tethered Scanner User’s Guide Connecting the Interfac e Cable The cable you use depends on the in terface and host device. Howev er all cables are connected to the scanner in th e same way . 1 Insert cable. Press f irmly until inser ted all the way. 2 Tighten the screw on the cable to secure it. Removin ...

  • Intermec SR61THP - page 17

    Chapter 1 — Introducing the S R61T SR61T Tethered Scanner User’s Guide 5 Accessories There are several different accessories available. Here you will f ind a list of required and optional accessories. Required Accessories Y ou will need one or more of the following cables for your SR61T . SR61T C able List Cable Part Nu mber USB cable 236-240-x ...

  • Intermec SR61THP - page 18

    Chapter 1 — Introducing the SR61T 6 SR61T Tethered Scanner User’s Guide Optional Accessories The following accessories are optional. Desktop Stand SR61T Deskto p Stand (P /N 203-87 8-xxx): The desktop stand provides you with a convenient way to store the SR61T when you are not using it. Hands-Free Stand SR6 1T Hands-F ree Stan d (P /N 203-8 77 ...

  • Intermec SR61THP - page 19

    Chapter 1 — Introducing the S R61T SR61T Tethered Scanner User’s Guide 7 W all or V ehicle Mount Holder SR61T W all or V ehicle Mount Holder (P /N 203-8 76- xxx ): The wall or ve hicle mount holder provides you with a convenient way to store the SR61T when you are not using it . Y ou can either attach the ho lder to a wall with screws or attach ...

  • Intermec SR61THP - page 20

    Chapter 1 — Introducing the SR61T 8 SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 21

    9 2 Scanning With the SR61T This chapter explains how to scan bar codes and includes the following sections: • Understanding the SR61T Behavior • Scanning Bar Codes ...

  • Intermec SR61THP - page 22

    Chapter 2 — Scanning With the SR61T 10 SR61T Tethered Scanner User’s Guide Understanding the SR61T Behavior The SR61T uses lights, beeps and vibr ations to indicate if a bar code has been successfully decoded. The status light and beeps described in this section are new and do not correspond to the legacy SR61T models (SR61T V , SR61TA, SR61TL ...

  • Intermec SR61THP - page 23

    Chapter 2 — Scanning With the SR61T SR61T Tethered Scanner User’s Guide 11 Understanding the Beeps The SR61T beeps to give you audio feedback when performing some functions. For example, y ou hear a beep each time you scan a valid bar code. Stacked Code Crackle When using SR61TL (laser scanner) by default the scanner makes a crackle noise when ...

  • Intermec SR61THP - page 24

    Chapter 2 — Scanning With the SR61T 12 SR61T Tethered Scanner User’s Guide Using Vibrate Alert Y ou can conf igure the SR61T to vibr ate when it successfully decodes a bar code. This feature can be useful in these situations: • Y ou are in a noisy environment, such as a busy warehouse, where it can be diff icult to hear the beep. • Y ou are ...

  • Intermec SR61THP - page 25

    Chapter 2 — Scanning With the SR61T SR61T Tethered Scanner User’s Guide 13 Scanning Bar Codes The SR61T contains either a 1D lin ear imager (SR61T1D), 2D area imager (SR61T2D or SR61THP), lase r scan engine (SR61TL), or near- far range area imager (SR61TXR) to scan bar code data. The type of scan engine you are using and the type of bar code yo ...

  • Intermec SR61THP - page 26

    Chapter 2 — Scanning With the SR61T 14 SR61T Tethered Scanner User’s Guide T o scan a bar code label with a laser scanner or 1D linear imager 1 Point the SR61T at the bar code label and hold the SR61T at a slight angle 15 to 25 cm (6 to 10 in) from the label. 2 Pull the trigger, and direct the red beam so that it falls across all bars in the ba ...

  • Intermec SR61THP - page 27

    Chapter 2 — Scanning With the SR61T SR61T Tethered Scanner User’s Guide 15 T o scan omni-directionally with the 2D, 2D high performance or near- far range area imager 1 Point the scanner windo w at the bar code label and hold the SR61T steady a few inches from the label. 2 Pull the trigger. • If you are scanning with one of the 2D imagers, us ...

  • Intermec SR61THP - page 28

    Chapter 2 — Scanning With the SR61T 16 SR61T Tethered Scanner User’s Guide SR61TXR Aiming Beam 3 When the SR61T successfully reads a bar code label, the SR61T beeps one time, the status light brief l y turns green, and the scanner lighting turns off. If Vibr ate Alert is enabled, the SR61T brief ly vibrates. 4 Release the trigger. Hands-Free Sc ...

  • Intermec SR61THP - page 29

    17 3 SR61T Interfac es This chapter explains the different interfaces available with the SR61T : • USB Interface • RS-232 Interface • Keyboard W edge/Y -Cable Interface • W and Emulation Interface ...

  • Intermec SR61THP - page 30

    Chapter 3 — SR61T Interfaces 18 SR61T Tethered Scanner User’s Guide USB Interface The SR61T can be connected to a USB host using one of the USB cables. The SR61T is USB 2.0 and operates at full speed. Power is provided either by the host or by the external pow er supply connected to the USB cable. See the “Required Accessories” on page 5 fo ...

  • Intermec SR61THP - page 31

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 19 4 Turn on y our host device. 5 If necessar y , use the conf iguration ba r codes in the next section to conf igure your SR61T for an International keyboard. The default keyboard is North America. Setting up the USB Interface This section provides conf igur ation bar codes for a ...

  • Intermec SR61THP - page 32

    Chapter 3 — SR61T Interfaces 20 SR61T Tethered Scanner User’s Guide German Windows Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows Brazilian Portuguese Windows Czech Republic Windows Slovakian Windows Hungarian 101-K ey ...

  • Intermec SR61THP - page 33

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 21 USB Cable Mode By default the USB cable mode is set to keyboard HID. Howev er you can also set up your scanner to use the virtual COM USB cable mode. USB K eybo ard HID (*) USB Virtual COM For a f irst time setup when using the vir tual COM USB cable mode you will need to do wn ...

  • Intermec SR61THP - page 34

    Chapter 3 — SR61T Interfaces 22 SR61T Tethered Scanner User’s Guide T o install the USB driver (IntermecVCOM.inf file) 1 Windows inf o rms you that it has found new hardware. Select No , not at this time then click Nex t . 2 On the next screen, select Install from a list or specif ic location (Advanced) . Click Next . ...

  • Intermec SR61THP - page 35

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 23 3 Use the Browse button to f ind the IntermecVCOM.inf file. Click Nex t . 4 Windows informs y ou that this software has not passed Windows testing. Click Continue Anyway . 5 Click Finish and the install is complete. T o test that the install is successful, press the trigger. If ...

  • Intermec SR61THP - page 36

    Chapter 3 — SR61T Interfaces 24 SR61T Tethered Scanner User’s Guide RS - 232 Interface The SR61T can be connected to a host using one of the RS-232 cables. Pow er is provided either by the host or b y the external power supply connected to the RS-232 cable. See the “R equired Accessories” on page 5 for a list of part numbers for the differe ...

  • Intermec SR61THP - page 37

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 25 4 Turn on the host device. 5 If necessar y , use the conf iguration ba r codes in the next section to conf igure your SR61T serial paramete rs to match th e PC. The default serial parameters for the SR61T are: Setting up the RS- 232 Interface This section provides conf iguratio ...

  • Intermec SR61THP - page 38

    Chapter 3 — SR61T Interfaces 26 SR61T Tethered Scanner User’s Guide 256000 460800 Data Bits 7 8 (* ) Parit y None (*) Even Odd Stop Bits 1 (*) 2 ...

  • Intermec SR61THP - page 39

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 27 K eyboard W edge/Y - Cable Interface The SR61T can be connected to a ho st using a keyboard wedge or Y - cable. Po wer is provided either by the host or by the external power supply connected to the cable. See the “Required Accessories” on page 5 for a list of part numbers ...

  • Intermec SR61THP - page 40

    Chapter 3 — SR61T Interfaces 28 SR61T Tethered Scanner User’s Guide 4 Turn on y our host device. 5 If necessar y , conf igure your SR61T for an International keyboard (see “International Keyboard” on page 19 ). The default keyboard is North America. T o connect with a Y - cable 1 T urn off your host device. 2 Connect the Y -cable to your SR ...

  • Intermec SR61THP - page 41

    Chapter 3 — SR61T Interfaces SR61T Tethered Scanner User’s Guide 29 W a nd Emulation Interface The SR61T can be connected to a ho st using a wand emulation cable. See the “Required Accessories” on page 5 for a list of part numbers for the different cables. The type of cable depends on the host device or intermec computer your are using. No ...

  • Intermec SR61THP - page 42

    Chapter 3 — SR61T Interfaces 30 SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 43

    31 4 Configuring the SR61T This chapter provides some basic conf iguration bar codes and information on how to configure the SR61T using the EasySet conf iguration application. This chapter includes: • Basic Setup with Conf iguration Bar Codes • Conf iguring Y our Scanner with EasySet ...

  • Intermec SR61THP - page 44

    Chapter 4 — Configuring the SR61T 32 SR61T Tethered Scanner User’s Guide Basic Setup with Configuration Bar Codes This chapter provides you with co nfiguration bar codes for a basic setup. For more co nf iguratio n options, use EasySet (s ee “Conf iguring Y our Scanner with EasySet” on page 33 ). Resetting Y our Scanner T o reset your scann ...

  • Intermec SR61THP - page 45

    Chapter 4 — Configuring the SR61T SR61T Tethered Scanner User’s Guide 33 None Carr iag e Ret ur n Enter Configuring Y our Scanner with EasySet EasySet is an Intermec configuration application that provides you with two ways to configure your scanner. • Online setup—send conf igurat ion commands from EasySet directly to the product. • Off ...

  • Intermec SR61THP - page 46

    Chapter 4 — Configuring the SR61T 34 SR61T Tethered Scanner User’s Guide 4 Select Communication > Select Com munication Int erf ace. The Communication Interface dialog box appears. 5 Select the communication interfa ce that you are using for your scanner and click OK . 6 For RS-232 or USB Virtual Com in terface: The Connection Para me t er s ...

  • Intermec SR61THP - page 47

    Chapter 4 — Configuring the SR61T SR61T Tethered Scanner User’s Guide 35 Offline Setup with EasySet T o configure you r scanner offline by s canning bar codes 1 Star t EasySet. The f irst time you st art EasySet, the Select product dialog box ap pears. If the Select product dialog box does not appear, choose Product > Select or click on the ...

  • Intermec SR61THP - page 48

    Chapter 4 — Configuring the SR61T 36 SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 49

    37 5 T roubleshooting and Maintaining the SR61T Use this chapter to solve problems you may hav e while using the SR61T . This chapter cont ains these topics: • Troubleshooting the SR61T • Maintaining the SR61T ...

  • Intermec SR61THP - page 50

    Chapter 5 — Troubleshooti ng and Maintaining the SR61T 38 SR61T Tethered Scanner User’s Guide T roubleshooting the SR61T If you have problems using the SR61T , use this chapter to f ind a possible solution. Calling Product Support T o talk to an Intermec Prod uct Support representati ve: • In the U.S.A. and Canada, call 1-800-755-5505 • Out ...

  • Intermec SR61THP - page 51

    Chapter 5 — Troubleshooting and Maintaining the SR61T SR61T Tethered Scanner User’s Guide 39 Get sub-system version Problems and Possible Solutions Use this section to f ind possible solutions to problems you may have. Problems and Possible Solutions Problem Possible Solution Y ou pull the tri gger, but nothing hap pens. The SR61T receives powe ...

  • Intermec SR61THP - page 52

    Chapter 5 — Troubleshooti ng and Maintaining the SR61T 40 SR61T Tethered Scanner User’s Guide Y ou scan a bar code and the status light turn s on, but the SR61T does not beep. The beep duration, v olume, frequency , and number may be conf igured so the SR61T does not beep. T o reset the SR61T , scan this bar code: Reset facto r y de faults Y ou ...

  • Intermec SR61THP - page 53

    Chapter 5 — Troubleshooting and Maintaining the SR61T SR61T Tethered Scanner User’s Guide 41 Maintaining the SR61T T o keep your SR61T in good w orking order, y o u may need to upgrade the SR61T f irmware and clean the scanner window . Upgrading the SR61T Y ou may need to upgrade the SR61 T f irmware if there is an update that incorporates chan ...

  • Intermec SR61THP - page 54

    Chapter 5 — Troubleshooti ng and Maintaining the SR61T 42 SR61T Tethered Scanner User’s Guide e Click the link to download the firmware upgrade package and save it to your PC. f U nzip the .zip f ile. 2 Connect your SR61T to a host PC with the appropriate cable . 3 Scan the Reset Factory Defaults bar code: Reset facto r y de faults 4 Start Easy ...

  • Intermec SR61THP - page 55

    Chapter 5 — Troubleshooting and Maintaining the SR61T SR61T Tethered Scanner User’s Guide 43 7 Select the cable and click Ne xt . 8 Use Browse to bro wse to the location of the f irmwa re upgrade f ile (.bin), select the f ile, and click Open . Click Ne xt . ...

  • Intermec SR61THP - page 56

    Chapter 5 — Troubleshooti ng and Maintaining the SR61T 44 SR61T Tethered Scanner User’s Guide 9 For USB cables only , scan the Firmware upgrade bar code that appears on the screen then click OK . For other cables, go directly to the next step. 10 Select the Com port and parameters (if necessary) and deselect the Display help check box. Click Ne ...

  • Intermec SR61THP - page 57

    Chapter 5 — Troubleshooting and Maintaining the SR61T SR61T Tethered Scanner User’s Guide 45 When the f irmware download is com plete, the “Operation successful” message appears. 12 Click Finish . Y ou have successfully upgraded your scanner fi rm w ar e. Scanner Recover y If something happens to your scanner and it does not turn on despite ...

  • Intermec SR61THP - page 58

    Chapter 5 — Troubleshooti ng and Maintaining the SR61T 46 SR61T Tethered Scanner User’s Guide Cleaning the SR61T Clean the scanner window as often as needed for the environment in which you are using the SR61T . T o clean the scanner window , you can use soapy water , a solution of ammonia and water, or isopropyl alcohol. T o clean the scanner ...

  • Intermec SR61THP - page 59

    47 A Specifications and Reading Distances This appendix contains the technical specif ications and reading distances for each scanner model. ...

  • Intermec SR61THP - page 60

    Appendix — Specifications and Reading Distances 48 SR61T Tethered Scanner User’s Guide Specifications Use this section to f ind tec hnical in formation about the SR61T Physical Dimensions Length 19.4 cm (7 .6 in) Height 13. 1 cm (5.2 in) Width 7 .2 cm (2.8) W eight 320 g (11.2 oz) Electrical Specifica tions Electrical rating x 5V , 1.7A T ypica ...

  • Intermec SR61THP - page 61

    Appendix — Specifications and Reading Distances SR61T Tethered Scanner User’s Guide 49 T emperature and Enviro nmental Specifications Operating -20°C to 50°C (-4°F to 122 °F) @ 3.3V Storage -40°C to 70°C (-40°F to 158°F) Relative h umidity 5 to 95% no n-condensing Shock 2000G, half sinus, 0.7 ms, 6 d irections Vibrations 8G, from 10Hz t ...

  • Intermec SR61THP - page 62

    Appendix — Specifications and Reading Distances 50 SR61T Tethered Scanner User’s Guide * = These symbologies are only available with SR61TL (laser scanner). Canada Post Japan Post Codabar Matrix 2 of 5 Codablock A Maxicode Codablock F Micro PDF417 Code 11 MSI Code 39 Muticode Code 93/93i PDF417 Code 128 / GS1-12 8 Planet DataMatrix Plessey Dut ...

  • Intermec SR61THP - page 63

    Appendix — Specifications and Reading Distances SR61T Tethered Scanner User’s Guide 51 Reading Distances The reading distances for each scanner are typical distances measured in an off ice environment (200 lux). SR61T1D 8" 4" 6" 2" 0" 2" 4" in 04 5 40 35 30 25 20 15 10 55 0 0" 18" 16" 14" 1 ...

  • Intermec SR61THP - page 64

    Appendix — Specifications and Reading Distances 52 SR61T Tethered Scanner User’s Guide SR61TL in 08 0 60 40 20 100 cm 20 10 0 40 30 50 0" 32" 24" 16" 8" 40" 0.125 mm / 5 mils EAN/UPC 0.5 mm / 20 mils 64" 48" 56" 120 140 160 60 70 80 20 10 40 30 50 60 70 80 0 32" 24" 16" 8" 40" ...

  • Intermec SR61THP - page 65

    Appendix — Specifications and Reading Distances SR61T Tethered Scanner User’s Guide 53 SR61T2D 8" 4" 6" 2" 0" 2" 4" 6" 8" 10" 10" 10 5 0 5 10 15 20 20 15 25 25 cm PDF417 10 mils 0.15mm/6 mils 0.25 mm / 10 mils 0.5 mm / 20 mils Data Matrix 10 mils in 0" 36" 32" 28" 24&quo ...

  • Intermec SR61THP - page 66

    Appendix — Specifications and Reading Distances 54 SR61T Tethered Scanner User’s Guide SR61THP 8" 4" 6" 2" 0" 2" 4" 6" 8" 10" 10" 10 5 0 5 10 15 20 20 15 25 25 cm PDF417 10 mils 0.5 mm / 20 mils 1 mm / 40 mils Data Matrix 10 mils in 0" 36" 32" 28" 24" 20" 16&qu ...

  • Intermec SR61THP - page 67

    Appendix — Specifications and Reading Distances SR61T Tethered Scanner User’s Guide 55 SR61TXR 32" in 0 100 cm 160 80 0 80 160 240 240 0" 40" 80" 0.25 mm 10 mils 0.5 mm/20 mils 1 mm/40 mils 200 300 600 400 700 500 120" 160" 200" 64" 0" 32" 64" 800 900 240" 280" 320" 360" ...

  • Intermec SR61THP - page 68

    Appendix — Specifications and Reading Distances 56 SR61T Tethered Scanner User’s Guide ...

  • Intermec SR61THP - page 69

    ...

  • Intermec SR61THP - page 70

    Worldwide Headquarters 6001 36th Avenue W est Everett, Washington 98203 U. S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2010 Intermec T echnologies Corporation. All rights reserved. SR61T T ethered Scanner User ’s Guide *934-024-003* P/N 934-024 -003 ...

Manufacturer Intermec Category Barcode readers

Documents that we receive from a manufacturer of a Intermec SR61THP can be divided into several groups. They are, among others:
- Intermec technical drawings
- SR61THP manuals
- Intermec product data sheets
- information booklets
- or energy labels Intermec SR61THP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intermec SR61THP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intermec SR61THP, service manual, brief instructions and user manuals Intermec SR61THP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intermec SR61THP.

Similar manuals

A complete manual for the device Intermec SR61THP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intermec SR61THP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intermec SR61THP.

A complete Intermec manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intermec SR61THP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intermec SR61THP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intermec SR61THP, that we can find in the current document
3. Tips how to use the basic functions of the device Intermec SR61THP - which should help us in our first steps of using Intermec SR61THP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intermec SR61THP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intermec SR61THP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intermec SR61THP?

Use the form below

If you did not solve your problem by using a manual Intermec SR61THP, ask a question using the form below. If a user had a similar problem with Intermec SR61THP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)