English dropdown-ico

Manual Epson 8900 Series

224 pages 0.76 mb
Download

Go to site of 224

Summary
  • Epson 8900 Series - page 1

    Model 8900 Series Printer T echnical Refer ence Manual 5321 Buffalo Road • Erie, P A 16510 800-570-4533 • www .fastprinters.com ...

  • Epson 8900 Series - page 2

    Preface ............................................................................................... v 1 General Information Introduction .................................................................................... 1 -2 Paper-Handling System .................................................................. 1-2 Printer Features ......... ...

  • Epson 8900 Series - page 3

    6 Tl Model 855 Printer DP Emulation Introduction .................................................................................... 6-3 Model 855 DP Command Descriptions .......................................... 6-7 7 IBM Proprinter XL Emulation Introduction .................................................................................... 7-4 ...

  • Epson 8900 Series - page 4

    Copyright © 2001 by Lake Erie Systems All Rights Reserved — Printed In U.S.A. Model 8900 Series Printers T echnical Reference Manual Part No. 2557824-0002 Original Issue: August 1989 Revision F: January 2001 Changes may be periodically made to the information in this publication. Such changes will be incorporated in new editions of this manual. ...

  • Epson 8900 Series - page 5

    This manual contains technical information about the Model 8900 Series Printers. This information supplements the information contained in the Model 8900 Series Printer User ’ s Manual Part No. 2557785-0002 and is essential to programmers, system managers, and other technically oriented people. The information in this manual is presented in indiv ...

  • Epson 8900 Series - page 6

    vi Chapter 3 — Character Sets and Global Commands provides general information about character sets and their use in the Model 8900 Series Printer and describes the commands that are valid for all emulation modes, both standard and optional. These commands provide control of the basic features of the Model 8900 Series Printer . Chapter 4 — T ex ...

  • Epson 8900 Series - page 7

    Appendix — Application Instructions explains how to use the Z-axis printhead adjustment escape sequence and how to clean the automatic page finder sensor . Other Manuals About the Printer The following manuals are available to help you learn more about your printer and to help you operate and maintain the printer . Title Part Number Model 8900 Se ...

  • Epson 8900 Series - page 8

    Introduction .................................................................................... 1-2 Paper-Handling System .................................................................. 1-2 Printer Features ............................................................................... 1-3 Print Quality ........................................ ...

  • Epson 8900 Series - page 9

    Introduction The Model 8900 Series Printer is one of a family of rugged, high- performance, dot-matrix impact printers, which forms letters, numbers, and other symbols by printing dot patterns. The printer offers a variety of common and unique features, such as multiple paper paths and paper-feed methods, selectable print-quality settings, zero pap ...

  • Epson 8900 Series - page 10

    All paper-handling operations are accessible through the control panel and via the host computer using global commands. Printer Features The Model 8900 Series Printer includes the following features. q Print quality choices — letter-quality (LQ), text, normal draft, and Rapid Print ™ draft q Standard character sets — US ASCII (with 13 interna ...

  • Epson 8900 Series - page 11

    q Graphics capabilities — vertical raster graphics (all points addressable) q Color printing — up to seven colors, including black, for both text and graphics (standard on Model 8930 and optional on Model 8920) q Resident emulation modes — TI 880, TI 855, Epson ® FX and IBM Proprinter XL q Standard communication interfaces — serial (RS-232 ...

  • Epson 8900 Series - page 12

    Quality can be improved by increasing the dot density (resolution), as shown in the following figure. Dot density is expressed in dots per inch (dpi). The Model 8900 Series Printer offers four levels of print quality , based on the dot density and the placement of dots on the matrix. The increased dot density at higher print-quality levels decrease ...

  • Epson 8900 Series - page 13

    General Information 1-6 The printer offers the following print-quality levels and speeds. q Letter quality (LQ) — high-resolution, 32-dot by 18-dot characters at 100 characters per second (cps). q T ext quality — medium-resolution, 15-dot by 9-dot characters at 240 cps. q Normal draft quality — low-resolution, 9-dot by 9-dot characters at 400 ...

  • Epson 8900 Series - page 14

    Introduction .................................................................................... 2-3 Model 8900 Series Emulation Modes ............................................ 2-5 TI 880 Emulation ....................................................................... 2- 6 Execute Commands ...................................................... ...

  • Epson 8900 Series - page 15

    Miscellaneous Setup Parameters .................................................. 2-14 Character Set ........................................................................... 2-14 Z-Axis Control ......................................................................... 2-15 Ribbon T ype ............................................................. ...

  • Epson 8900 Series - page 16

    Printer Setup 2-3 Introduction The Model 8900 Series Printers are compatible with a wide range of computers and application software. The printer menu structure enables you to select and alter the fundamental printer operating parameters to fit the requirements of your computer , its communication interface, and its application software. Y ou can s ...

  • Epson 8900 Series - page 17

    Printer Setup 2-4 Note: The Model 8900 Series Printers User ’ s Manual (Part No. 2557785-0002) explains the basic use of the operator control panel and its associated menu structure. The Setup/T est switch on the control panel lets you enter the setup/ test menu. This menu consists of the following submenus containing most of the printer setup pa ...

  • Epson 8900 Series - page 18

    Model 8900 Series Emulation Modes The emulation mode determines how the printer responds to commands from the host computer and determines the specific set of commands to which the printer responds. For example, if you select the TI 880 emulation mode, the printer emulates the functions of the TI Model 880 Printer and responds to the set of command ...

  • Epson 8900 Series - page 19

    Printer Setup 2-6 TI 880 Emulation The TI 880 emulation submenu contains a group of setup parameters that can be set to either on or off. These parameters determine how your printer responds to certain commands from the host computer . Execute Commands When on, this parameter enables the printer to respond to escape sequence commands from the host ...

  • Epson 8900 Series - page 20

    Line Feed and Carriage Return Upon Receipt of CR When on, this parameter causes the printer to perform both an LF operation and a CR operation upon receiving a CR command from the host computer . The default setting is OFF . Carriage Return Upon Receipt of LF , VT , or DC2 When on, this parameter causes the printer to perform a CR operation upon re ...

  • Epson 8900 Series - page 21

    Printer Setup 2-8 TI 855 Emulation The TI 855 emulation submenu contains the processing mode (WP/DP) parameter and the automatic line feed parameter , both of which can be set to match the requirements of your computer . The following paragraphs describe these parameters. Processing Mode The Tl 855 emulation mode lets you choose either of the follo ...

  • Epson 8900 Series - page 22

    Printer Setup 2-9 Automatic Carriage Return This parameter is similar to the automatic LF parameter but is turned on for software that does not send a CR command at the end of each print line. If the printer advances from print line to print line but fails to perform a carriage return operation, you need to turn on the automatic CR parameter . The ...

  • Epson 8900 Series - page 23

    Printer Setup 2-10 Interface Parameters The interface parameters are values associated with serial communi- cation interfaces. When using a serial interface, these parameters must be set to correspond to the capabilities of the host computer and the interface. The following figure shows the interface submenu and the following paragraphs describe th ...

  • Epson 8900 Series - page 24

    Baud Rate The baud rate is the rate (in bits per second) at which the interface transfers data. This parameters are 300, 600, 1200, 2400, 4800, 9600, or 19,200 bits per second. The default setting is 9600. Note: Data transferred over a serial interface consists of either 7- or 8-bit data bytes, each of which is accompanied by a start bit, a stop bi ...

  • Epson 8900 Series - page 25

    Printer Setup 2-12 XON/XOFF (transmit-on/transmit-off) For this busy-handling protocol, the printer sends a single XON (a DC1 control character) to indicate that it is ready to receive data and a single XOFF (a DC3 control character) to indicate that it is busy . The default setting is OFF . Robust XON/XOFF For the robust XON/XOFF protocol, the pri ...

  • Epson 8900 Series - page 26

    Printer Setup 2-13 ETX/ACK (end-of-text/acknowledge) For this busy-handling protocol, the host sends an ETX control character at the end of each data transmission, and the printer responds with an ACK control character to indicate that it is ready to receive additional data. If the printer is busy when it receives the ETX control character , it del ...

  • Epson 8900 Series - page 27

    Printer Setup 2-14 Miscellaneous Setup Parameters The miscellaneous setup parameters are mechanical and operational features that do not fit logically into the other setup categories. The following figure shows the miscellaneous setup parameters submenu and the following paragraphs describe these parameters. Character Set The Model 8900 Series Prin ...

  • Epson 8900 Series - page 28

    Printer Setup 2-15 Z -Axis Control The printer adjusts the printhead-to-paper clearance ( z -axis) auto- matically when you load paper into the printer . In addition, the Z -AXIS parameter provides a manual z -axis adjustment. This selection invokes a display that lets you adjust the printhead in or out. Y ou also can adjust the z -axis using an es ...

  • Epson 8900 Series - page 29

    Idle Delay At the end of a printing operation, if the paper is at top of form, the printer waits for more data and then, after a short delay (idle delay), moves the paper to the tear-of f position. The IDLE DELA Y parameter invokes a display that lets you adjust the idle delay to a value in the range of 300 milliseconds to 90 seconds. Y ou can disa ...

  • Epson 8900 Series - page 30

    Printer Setup 2-17 Graphics Printing Mode The BI-DIR GRAPHIC parameter lets you choose whether the printer prints graphics bidirectionally or from left to right only . The default setting is NO (print graphics from left to right only). LCD Language The LCD LANG parameter lets you set the control panel LCD to display its messages in English, French, ...

  • Epson 8900 Series - page 31

    Access the menu to select the four available options as follows. 1. Press and hold the Clear Error switch, then press and hold the Status switch. 2. Release the Clear Error switch, continue to hold the Status switch, then press and hold the Setup/T est switch. 3. Release the Status switch, continue to hold the Setup/T est switch. The LCD displays K ...

  • Epson 8900 Series - page 32

    Character Sets and Global Commands 3-1 Introduction .................................................................................... 3-2 Character Code T able ..................................................................... 3-2 Character Sets ................................................................................. 3-3 The US ASCII ...

  • Epson 8900 Series - page 33

    Character Sets and Global Commands 3-2 Introduction This chapter describes the standard character sets and provides information about their use in the Model 8900 Series Printers. The printer can use any of several standard or optional character sets that can be selected via the operator control panel switches or via the host computer . These charac ...

  • Epson 8900 Series - page 34

    Character Sets Y our printer can use any of the following character sets. q US ASCII (default character set) q IBM PC1 q IBM PC2 q Nordic PC q ISO 8859/1 Multinational q IBM Multinational Note: The option ROM sockets on the printer logic board let you install additional character sets. Character Sets and Global Commands 3-3 ...

  • Epson 8900 Series - page 35

    The US ASCII Character Set The following table shows the U.S.A. Standard Code for Information Interchange (US ASCII) character set. This 7-bit character set is defined by the American National Standards Institute document ANSI X3.4 and is a variant of the ISO 646 character set. US ASCII Character Set Character Sets and Global Commands 3-4 ...

  • Epson 8900 Series - page 36

    Character Sets and Global Commands 3-5 International ASCII Character Sets W ith a few exceptions, the international versions of the ASCII character set are identical to the US ASCII character set. These international versions can be selected via the operator control panel or via the host computer . The following table lists the variations between t ...

  • Epson 8900 Series - page 37

    Character Sets and Global Commands 3-6 The IBM PC1 Character Set The following two tables show , respectively , the left half and right half of the the IBM PC 1 character set. IBM PC1 Character Set, Left Half ...

  • Epson 8900 Series - page 38

    Character Sets and Global Commands 3-7 IBM PC1 Character Set, Right Half ...

  • Epson 8900 Series - page 39

    Character Sets and Global Commands 3-8 The IBM PC2 Character Set The following two tables show , respectively , the left half and the right half of the IBM PC2 character set. IBM PC2 Character Set, Left Half ...

  • Epson 8900 Series - page 40

    Character Sets and Global Commands 3-9 IBM PC2 Character Set, Right Half ...

  • Epson 8900 Series - page 41

    Character Sets and Global Commands 3-10 The Nordic PC Character Set The following two tables show , respectively , the left half and right half of the Nordic PC character set. Nordic PC Character Set, Left Half ...

  • Epson 8900 Series - page 42

    Nordic PC Character Set, Right Half Character Sets and Global Commands 3-1 1 ...

  • Epson 8900 Series - page 43

    Character Sets and Global Commands 3-12 ISO 8859/1 Multinational Character Set The following two tables show , respectively , the left half and right half of the ISO 8859/1 Multinational character set. The shaded character positions (128-159) represent the Cl control characters which are not implemented in the Model 8900 Series Printers. ISO 8859/1 ...

  • Epson 8900 Series - page 44

    ISO 8859/1 Multinational Character Set, Right Half Character Sets and Global Commands 3-13 ...

  • Epson 8900 Series - page 45

    Character Sets and Global Commands 3-14 IBM Multinational Character Set The following two tables show , respectively , the left half and right half of the IBM Multinational character set. IBM Multinational Character Set, Left Half ...

  • Epson 8900 Series - page 46

    Character Sets and Global Commands 3-15 IBM Multinational Character Set, Right Half ...

  • Epson 8900 Series - page 47

    Character Sets and Global Commands 3-16 Control Characters Any character that causes the printer to perform a function is classified as a control character . Note that, although the Cl control characters are available in one of the standard character sets (ISO 8859/Multinational), your printer does not implement them. American National Standard ANS ...

  • Epson 8900 Series - page 48

    Character Sets and Global Commands 3-17 C0 Control Characters Hexadecimal Char Code Definition Communication controls: SOH 01 Start of header STX 02 Start of text ETX 03 End of text EOT 04 End of transmission ENQ 05 Enquiry ACK 06 Acknowledge DLE 10 Data link escape NAK 15 Negative acknowledge SYN 16 Synchronous idle ETB 17 End of transmission bloc ...

  • Epson 8900 Series - page 49

    Printer Commands The Model 8900 Series Printers receive commands from the host computer in the form of ASCII control character codes and escape- sequence codes. In response to these commands, the printer performs one or more operations defined by the command set of the currently selected emulation mode. Chapters 4 through 8 describe the standard em ...

  • Epson 8900 Series - page 50

    Character Sets and Global Commands 3-19 Some escape sequence commands, valid for all emulation modes, are called global commands. These are special commands that select or control some basic or specially defined printer operation. Global Command Set The following table lists the global commands for the Model 8900 Series Printers. These commands are ...

  • Epson 8900 Series - page 51

    Barcode Operations The barcode commands let you select a barcode font, set its parameters, and print any specified character in the equivalent barcode font. Note: If the barcode option is not installed, using this ESC sequence causes an ESC SEQ error . Set Barcode Parameters Escape sequence: ESC DLE B P t rs ETX Hexadecimal: 1B 10 42 50 t rs 03 Thi ...

  • Epson 8900 Series - page 52

    Character Sets and Global Commands 3-21 Print Barcode T ext Escape sequence: ESC DLE B C text ETX Hexadecimal: 1B 10 42 43 text 03 This command lets you print a character or string of characters specified by the variable text. For example, to print the barcode equivalents of the numerals 0, 1, and 2 from the barcode font set selected by the Set Bar ...

  • Epson 8900 Series - page 53

    Character Sets and Global Commands 3-22 Print Oversize Character Escape sequence: ESC DLE C C text ETX Hexadecimal: 1B 10 43 43 text 03 This command prints the text contained within the command using the horizontal and vertical scale factors selected by the Set Oversize Characters command. The text variable is the character string to be printed in ...

  • Epson 8900 Series - page 54

    Character Sets and Global Commands 3-23 Selecting an Automatic Sheet Feeder Bin Escape sequence: ESC DLE EM n Hexadecimal: 1B 10 19 n This command selects the ASF bin designated by the variable n, where n can range from 30 through 33 hex as follows: 0 (30H) = Load from current bin 1 (31H) = Select & load from bin 1 2 (32H) = Select & load f ...

  • Epson 8900 Series - page 55

    Character Sets and Global Commands 3-24 Defining Raster Graphics Escape sequence: ESC DLE G d1 d2 n1 n2 data Hexadecimal: 1B 10 47 d1 d2 n1 n2 data This command defines the dots-per-inch (DPI) density , the byte count of bit-image data, and bit-image data of those emulations that currently support raster graphics. The variable d1 d2 is DPI density ...

  • Epson 8900 Series - page 56

    Character Sets and Global Commands 3-25 Selecting a Font Escape Sequence: ESC DLE f n Hexadecimal: 1B 10 66 n This command allows you to access type styles not specifically supported by an emulation. This command selects the font designated by the variable n , where n can range from 0 through 254 decimal as follows: Font ID No. Courier 0 Prestige E ...

  • Epson 8900 Series - page 57

    Character Sets and Global Commands 3-26 Selecting Characters Per Inch (cpi) Escape sequence: ESC DLE P n Hexadecimal: 1B 10 50 n This command enables you to access natural pitches of a font that may not be specifically supported by an emulation. The command sets pitch according to the variable n , which can range from 30 through 33 hex. Unless spec ...

  • Epson 8900 Series - page 58

    Character Sets and Global Commands 3-27 The values of n for print mode selection are listed in the following table. Mode Hex V alue Draft 30 T ext 31 Letter 32 Fast Draft 33 Selecting an International Character Set Escape sequence: ESC DLE R n Hexadecimal: 1B 10 52 n The ASCII character set contains the C0 control codes, the uppercase and lowercase ...

  • Epson 8900 Series - page 59

    Character Sets and Global Commands 3-28 A character set is defined as 128 character positions. If more than 128 character positions are required, the set is divided in two and is designated left half (LH) for positions 1 through 127 and right half (RH) for positions 128 through 255. The MSB determines if the character set is placed in the left half ...

  • Epson 8900 Series - page 60

    Character Sets and Global Commands 3-29 Adjusting the Print head Z -Axis Position Escape sequence: ESC DLE zS N N Hexadecimal: 1B 10 7A SN N The Adjust Printhead Z -Axis Position command adjusts the printhead in or out by the number of steps specified by the variable NN, which is a two-digit ASCII value ranging from 00 through 99. See Appendix A fo ...

  • Epson 8900 Series - page 61

    Character Sets and Global Commands 3-30 If the paper is not at the top-of-form position when the printer receives the clear current path command, the printer executes a form feed operation before attempting to park tractor-fed paper and displays a prompt to PLEASE TEAR paper . If the P APEROUT=BUSY option in the Setup/T est menu is set to YES, clea ...

  • Epson 8900 Series - page 62

    Introduction .................................................................................... 4-4 TI 880 Answer Message Function ............................................. 4-5 TI 880 Response Format Selection ............................................ 4-5 Model 880 Printer Emulation Commands ...................................... 4-6 Model ...

  • Epson 8900 Series - page 63

    TI Model 880 Printer Emulation 4-2 Move to Column n .............................................................. 4-19 Carriage Return ................................................................... 4-19 T ab Right to Column N ....................................................... 4-20 T ab Right N Columns .................................... ...

  • Epson 8900 Series - page 64

    TI Model 880 Printer Emulation 4-3 Cancel Double Line Spacing .............................................. 4-26 Print Enhancement Commands ................................................ 4-26 Select Expanded (Double-W ide) Print ............................... 4-26 Cancel Expanded (Double-W ide) Print .............................. 4-26 Select L ...

  • Epson 8900 Series - page 65

    TI Model 880 Printer Emulation 4-4 Introduction The T exas Instruments Model 880 Printer emulation mode is the default emulation mode of your printer . If your printer includes color printing and the automatic sheet feeder , this mode lets you use the global commands described in Chapter 3 for operating these options. This mode also lets you use th ...

  • Epson 8900 Series - page 66

    TI Model 880 Printer Emulation 4-5 Tl 880 Answer Message Function The TI 880 emulation provides, as a TI 880 feature, an answerback message (ABM) that can be programmed with a message of up to 20 characters. If a message is programmed, it is transmitted when the ASCII character ENQ is received. The ABM is stored in the printer ’ s nonvolatile mem ...

  • Epson 8900 Series - page 67

    TI Model 880 Printer Emulation 4-6 q When the RESP FMT selection is W/ ESC; the format of the responses to the configuration and status requests are preceded by the ASCII ESC character and the string terminator is preceded by a semicolon. Response Examples: Config: ESC[880;14;27;36;41;c Status: ESC[880;24;2C;n Model 880 Printer Emulation Commands W ...

  • Epson 8900 Series - page 68

    TI Model 880 Printer Emulation 4-7 Model 880 Emulation Commands (continued) Command Command Name Margin Contr ol ESC [ N r Set T op Margin at Line N ESC [ ; N r Set Bottom Margin at Line N ESC [ N1 ; N2 r Set T op and Bottom Margins at Lines N1 and N2 ESC [ N s Set Left Mar gin at Column N ESC [ ; N s Set Right Margin at Column N ESC [ N 1 ; N2 s S ...

  • Epson 8900 Series - page 69

    TI Model 880 Printer Emulation 4-8 Model 880 Emulation Commands (continued) Command Command Name V ertical Motion LF Line Feed FF Form Feed VT T ab V ertically DC2 n Move to Line n ESC [ N d T ab V ertically to Line N ESC [ N e T ab V ertically N Lines ESC [ N1...N16 v Set V ertical T ab Stops ESC 1 n1...n16 NUL Set V ertical T ab Stops ESC J Set V ...

  • Epson 8900 Series - page 70

    TI Model 880 Printer Emulation 4-9 Model 880 Emulation Commands (concluded) Command Command Name Print Enhancement SO Select Expanded Print (1) ESC P M ESC Select Expanded Print ESC P N ESC Cancel Expanded Print ESC P O ESC Select Letter-Quality Print ESC P P ESC Cancel Letter-Quality Print Raster Graphics ESC [ H ; B ; V q Set Up Graphics ...

  • Epson 8900 Series - page 71

    Model 880 Command Descriptions The following paragraphs describe the Model 880 emulation mode commands. Many of the escape-sequence commands contain one or more variables to specify various command parameters. These variables are italicized in the command formats to indicate that they can be set to more than one value. Note: For clarity , the indiv ...

  • Epson 8900 Series - page 72

    TI Model 880 Printer Emulation 4-1 1 From the US ASCII character table, the ASCII character whose decimal value is 50 is the ASCII character 2. Thus, in this example, you set the value of n to 2. Printer Operation Commands These commands allow the host computer to control some basic printer functions. Sound Bell Contr ol character: BEL Hexadecimal: ...

  • Epson 8900 Series - page 73

    TI Model 880 Printer Emulation 4-12 The following table provides a complete list of Model 880 configuration codes. Model 880 Configuration Codes Code Description Communication Mode 13 Full-duplex modem connect 14 Direct connection, pin 1 1 high for ready 15 Direct connection, pin 1 1 low for ready 16 Optional communication interface 17 Parallel com ...

  • Epson 8900 Series - page 74

    TI Model 880 Printer Emulation 4-13 Model 880 Configuration Codes Code Description Miscellaneous Configuration Codes 81 Escape sequence execution enabled 83 X-on/X-off control (DC1 = ready , DC3 = busy) 84 LF and CR on receipt of LF 85 LF and CR on receipt of CR 8A Pin 20 ready/busy protocol enabled 8B CR on receipt of LF , VT , or DC2 9A SO select ...

  • Epson 8900 Series - page 75

    TI Model 880 Printer Emulation 4-14 The following table provides a complete list of Model 880 error codes. Model 880 Err or Codes Code Description 02 ROM error 03 NVRAM error 04 UAR T error 06 Communication controller error 07 Standard RAM error 12 Paper-out condition 23 Receive buffer overflow condition 24 Parity error 29 Invalid escape sequence 2 ...

  • Epson 8900 Series - page 76

    Set Form Length to n Lines Escape sequence: ESC C n Hexadecimal: 1B 43 n Escape sequence: ESC 2 n Hexadecimal: 1B 32 n The variable n can be any value in the range of 0 through 1 13 (hexadecimal 30 through 71). Note: The command ESC 2 n is not valid when raster graphics is enabled. Load Default Form Parameters Escape sequence: ESC P L 0 ESC Hexad ...

  • Epson 8900 Series - page 77

    TI Model 880 Printer Emulation 4-16 ...

  • Epson 8900 Series - page 78

    TI Model 880 Printer Emulation 4-17 Margin Control Commands After the margins have been set, changing the line spacing does not affect the top and bottom mar gins. However , changing the character pitch shifts the left margin to the nearest column of the new pitch value. The right margin shifts in proportion to the change in pitch. Set T op Margin ...

  • Epson 8900 Series - page 79

    TI Model 880 Printer Emulation 4-18 Set Left Margin at Column N Escape sequence: ESC [ N s Hexadecimal: 1B 5B N 73 The variable N can be any value in the range of 1 through, the column immediately to the left of the current right margin value, as determined by the line width setting. For example, if the current right margin is at column 80, the val ...

  • Epson 8900 Series - page 80

    TI Model 880 Printer Emulation 4-19 Horizontal Motion Commands After the horizontal tab stops have been set, changing from standard print to expanded print does not af fect the tab stop positions. However , changing the character pitch alters the tab stop positions in proportion to the change in pitch. Backspace Contr ol character: BS Hexadecimal: ...

  • Epson 8900 Series - page 81

    TI Model 880 Printer Emulation 4-20 T ab Right to Column N Escape sequence: ESC [ N‘ Hexadecimal: 1B 5B N 60 The variable N can represent any column between the current print position and the currently set right margin position. T ab Right N Columns Escape sequence: ESC [ N a Hexadecimal: 1B 5B N 61 For any value of N that exceeds the right margi ...

  • Epson 8900 Series - page 82

    TI Model 880 Printer Emulation 4-21 Set Horizontal T ab Stop at Current Position Escape sequence: ESC H Hexadecimal: 1B 48 Clear Horizontal T ab Stop at Current Position Escape sequence: ESC [ 0 g Hexadecimal: 1B 5B 30 67 V ertical Motion Commands V ertical tab stops define the line numbers at which the paper stops when performing vertical tab oper ...

  • Epson 8900 Series - page 83

    TI Model 880 Printer Emulation 4-22 T ab V ertically Contr ol character: VT Hexadecimal: 0B If the printer is configured to perform a carriage return upon receiving a VT control character , this command causes the printer to print the current line, advance the paper to the next vertical tab stop, and perform a carriage return. If the printer is not ...

  • Epson 8900 Series - page 84

    TI Model 880 Printer Emulation 4-23 Set V ertical T ab Stops Escape sequence: ESC [ N1...N16 v Hexadecimal: 1B 5B N1...N16 76 Escape sequence: ESC 1 n1...n16 NUL Hexadecimal: 1B 31 n1...n16 00 These commands set vertical tab stops at the lines specified by the variables N1 through N16 or n1 through n16, where each of the variables N1 through N16 or ...

  • Epson 8900 Series - page 85

    TI Model 880 Printer Emulation 4-24 Set Character Pitch to 10 cpi Escape sequence: ESC P C ESC Hexadecimal: 1B 50 43 1B 5C Escape sequence: ESC 6 Hexadecimal: 1B 36 Set Character Pitch to 12 cpi Escape sequence: ESC P K ESC Hexadecimal: 1B 50 4B 1B 5C Set Character Pitch to 16.7 cpi Escape sequence: ESC P D ESC Hexadecimal: 1B 50 44 1B 5C Esc ...

  • Epson 8900 Series - page 86

    Note: The command ESC 2 is valid only when raster graphics is enabled. Set Line Spacing to 8 lpi Escape sequence: ESC P H ESC Hexadecimal: 1B 50 48 1B 5C Escape sequence: ESC 5 Hexadecimal: 1B 35 Escape sequence: ESC 0 Hexadecimal: 1B 30 Set Line Spacing to n /72 Inch Escape sequence: ESC A n Hexadecimal: 1B 41 n This sequence is valid only if ra ...

  • Epson 8900 Series - page 87

    TI Model 880 Printer Emulation 4-26 Cancel Double Line Spacing Escape sequence: ESC P T ESC Hexadecimal: 1B 50 54 1B 5C Print Enhancement Commands The print enhancement commands enable your printer to improve or enhance print quality . Print enhancements include expanded and letter quality print. Select Expanded (Double-Wide) Print Escape sequenc ...

  • Epson 8900 Series - page 88

    TI Model 880 Printer Emulation 4-27 Raster Graphics Commands In the Model 880 raster graphics mode, the printer alternates between the left and right printhead pins and uses only the top eight pins of each column. The graphics feature enables you to create drawings by sending dot patterns (in the form of hexadecimal codes) to the printer . When the ...

  • Epson 8900 Series - page 89

    TI Model 880 Printer Emulation 4-28 Select 60 dpi Graphics Escape sequence: ESC K n1 n2 Hexadecimal: 1B 4B n1 n2 The variables n1 and n2 specify the number of bytes to print. Use the following steps to find the values of n1 and n2 for a horizontal line of graphics of a given length in inches. 1. Multiply by 60 the length of the line (in inches) to ...

  • Epson 8900 Series - page 90

    TI Model 880 Printer Emulation 4-29 Font Selection Commands Select Font N Escape sequence: ESC f N Hexadecimal: 1B 66 N The printer can have a maximum of 10 fonts, including the two standard fonts (Gothic and Courier) and up to eight optional fonts. The variable N can be any value in the range of 0 through 9, where 0 designates Gothic, 1 designates ...

  • Epson 8900 Series - page 91

    TI Model 880 Printer Emulation 4-30 Designate G2 Font by ROM Identifier N Escape sequence: ESC * N Hexadecimal: 1B 2A N Designate G3 Font by ROM Identifier N Escape sequence: ESC + N Hexadecimal: 1B 2B N V alid values for N are G for Gothic and C for Courier . Select Designated Character From G2 Font Contr ol Character: EM N Hexadecimal: 19 N Selec ...

  • Epson 8900 Series - page 92

    TI Model 880 Printer Emulation 4-31 Invoke G1 Font as GR Escape sequence: ESC k Hexadecimal: 1B 6B Invoke G2 Font as GR Escape sequence: ESC 1 Hexadecimal: 1B 6C Invoke G3 Font as GR Escape sequence: ESC m Hexadecimal: 1B 6D ...

  • Epson 8900 Series - page 93

    5 T exas Instruments Model 855 Printer WP Emulation Introduction .................................................................................... 5-4 Motion Indexes ............................................................................... 5-5 Model 855 WP Commands ............................................................. 5-6 Model 855 ...

  • Epson 8900 Series - page 94

    T ab Horizontally Absolute .................................................. 5-15 Set Horizontal T ab Stop at Current Position ...................... 5-15 Clear All Horizontal T ab Stops .......................................... 5-15 Clear Horizontal T ab Stop at Current Position ................... 5-15 V ertical Motion Commands ................ ...

  • Epson 8900 Series - page 95

    TI Model 855 Printer WP Emulation 5-3 Select 60 dpi Graphics ........................................................ 5-21 Select 72 dpi Graphics ........................................................ 5-21 Select 120 dpi Graphics ...................................................... 5-21 Select 144 dpi Graphics .................................. ...

  • Epson 8900 Series - page 96

    Introduction This chapter describes the T exas Instruments Model 855 word processing (WP) emulation mode. The Model 855 WP emulation mode allows the Model 8900 Series Printer to accept and respond to commands similar to those for a daisy-wheel printer . This mode allows the printer to emulate most functions of the Model 855 Printer operating in its ...

  • Epson 8900 Series - page 97

    q The escape sequence for font selection is ESC f N. q Selecting or canceling proportional spacing is not supported. q Disabling the paper-out detection is not supported. Motion Indexes The Model 855 WP emulation mode uses motion indexes to specify certain horizontal and vertical parameters. These motion indexes are established by character pitch a ...

  • Epson 8900 Series - page 98

    Model 855 WP Commands The following table lists the Model 855 WP commands. The para- graphs that follow the table describe these commands. Model 855 WP Commands Command Command Name Printer Operation ESC @ Select DP Mode ESC CR P Select WP Mode ESC SUB I Select WP Mode ESC w Suspend Printing ESC > Select Unidirectional Printing ESC < Cancel U ...

  • Epson 8900 Series - page 99

    Model 855 WP Commands (continued) Command Name Command Name Horizontal Motion BS Backspace HT T ab Horizontally CR Carriage Return ESC BS Move Back 1/120 Inch ESC HT n T ab Horizontally Absolute ESC 1 Set Horizontal T ab Stop at Current Position ESC 2 Clear All Horizontal T ab Stops ESC 8 Clear Horizontal T ab Stops at Current Position V ertical Mo ...

  • Epson 8900 Series - page 100

    Model 855 WP Commands (concluded) Command Name Command Name Horizontal Motion ESC SP Print Special Character ESC / Print Special Character Print Enhancement SO Select Expanded Print DC4 Cancel Expanded Print SI Select Compressed Print DC2 Cancel Compressed Print ESC q Select Letter-Quality Print ESC e Select Letter-Quality Print ESC d Cancel Letter ...

  • Epson 8900 Series - page 101

    TI Model 855 Printer WP Emulation 5-9 Model 855 WP Command Descriptions The following paragraphs describe the Model 855 WP emulation commands. The command formats are listed following each command description. Many of the escape-sequence commands contain one or more variables to specify various command parameters. These variables are italicized in ...

  • Epson 8900 Series - page 102

    TI Model 855 Printer WP Emulation 5-10 Select Unidirectional Printing Escape sequence: ESC > Hexadecimal: 1B 3E This command causes the printer to print all subsequent characters in the forward (left-to-right) direction only . Cancel Unidirectional Printing Escape sequence: ESC < Hexadecimal: 1B 3C This command causes the printer to resume no ...

  • Epson 8900 Series - page 103

    Form Format and Font Selection Commands The form format commands let you select and set some form-related parameters. The font selection command lets you choose between the two standard fonts and any installed optional fonts. The standard fonts for the Model 8900 Series Printer are Courier and Gothic. Residing in printer ROM, these fonts can be sel ...

  • Epson 8900 Series - page 104

    Select Font n Escape sequence: ESC f n Hexadecimal: 1B 66 n The printer can have a maximum of 10 fonts, including the two standard fonts (Gothic and Courier) and up to eight optional fonts. The variable n can be any value in the range of 0 through 9, where 0 designates Gothic, 1 designates Courier , 2 designates the first font in option ROM 1, 3 de ...

  • Epson 8900 Series - page 105

    Cancel Right Margin Justification Escape sequence: ESC [ Hexadecimal: 1B 5B Set T op Margin at Current Position Escape sequence: ESC + Hexadecimal: 1B 2B Changing the form length setting overrides this command and resets the top margin to the top-of-form position. Set Bottom Margin at Current Position Escape sequence: ESC - Hexadecimal: 1B 2D If th ...

  • Epson 8900 Series - page 106

    Horizontal Motion Commands The following paragraphs describe the commands for horizontal motion and horizontal tab functions in the Model 855 WP emulation mode. Backspace Contr ol character: BS Hexadecimal: 08 This command causes the printer to move the printhead one HMI position to the left. The next character printed following a BS command overst ...

  • Epson 8900 Series - page 107

    TI Model 855 Printer WP Emulation 5-15 q If the expanded print mode is active, the CR command resets the printer to the normal print mode. q If the automatic line feed function is active, the CR command causes the paper to advance one print line. Move Back 1/120 inch Escape sequence: ESC BS Hexadecimal: 1B 08 This command moves the print position 1 ...

  • Epson 8900 Series - page 108

    TI Model 855 Printer WP Emulation 5-16 V ertical Motion Commands V ertical tab stops define the line numbers at which the paper stops when performing vertical tab operations. After vertical tab stops have been set, any change of the vertical pitch causes a proportional change in the vertical tab stop positions. Line Feed Contr ol character: LF Hexa ...

  • Epson 8900 Series - page 109

    Move Up One Line Escape sequence: ESC LF Hexadecimal: 1B 0A The line space is the distance defined by the VMI or the distance set via the Form Config switch on the control panel. Move Up One-Half Line Escape sequence: ESC D Hexadecimal: 1B 40 When one-half line space is a fractional number of 1/144 inch steps, the printer truncates the number of st ...

  • Epson 8900 Series - page 110

    Set Character Pitch to 12 cpi Escape sequence: ESC z Hexadecimal: 1B 7A This command sets the character pitch to 12 cpi. Line Spacing Commands The following paragraphs describe the commands for line spacing operations in the Model 855 WP emulation mode. Set V ertical Motion Index to ( n -1)/48 Inch Escape sequence: ESC RS n Hexadecimal: 1B 1E n The ...

  • Epson 8900 Series - page 111

    TI Model 855 Printer WP Emulation 5-19 Print Enhancement Commands The print enhancement commands enable your printer to improve or enhance the print quality . Print enhancements include such things as expanded, compressed, LQ, and underlined text as well as boldface and shadow printing. Select Expanded Print Contr ol character: SO Hexadecimal: 0E T ...

  • Epson 8900 Series - page 112

    Cancel Letter-Quality Print Escape sequence: ESC d Hexadecimal: 1B 64 This command cancels LQ print and returns the printer to the draft print mode. Select T ext-Underline Print Escape sequence: ESC I Hexadecimal: 1B 49 Cancel T ext-Underline Print Escape sequence: ESC J Hexadecimal: 1B 4A Select Boldface Print Escape sequence: ESC K n Hexadecimal: ...

  • Epson 8900 Series - page 113

    TI Model 855 Printer WP Emulation 5-21 Raster Graphics Commands The following paragraphs describe the commands that control the raster graphics feature In the TI 855 WP emulation mode. T o find the values of n1 and n2 for any of the following commands, modify the procedure described for the Select 60 dpi Graphics command in Chapter 4. In step 1 of ...

  • Epson 8900 Series - page 114

    TI Model 855 Printer DP Emulation 6-1 Printer Operation Commands ......................................................... 6-7 Select DP Mode ......................................................................... 6-7 Select WP Mode ........................................................................ 6-7 Suspend Printing ..................... ...

  • Epson 8900 Series - page 115

    TI Model 855 Printer DP Emulation 6-2 Character Pitch Commands .......................................................... 6-13 Set Character Pitch to 10 cpi ................................................... 6-13 Set Character Pitch to 12 cpi ................................................... 6-13 Line Spacing Commands ........................... ...

  • Epson 8900 Series - page 116

    TI Model 855 Printer DP Emulation 6-3 Introduction This chapter describes the T exas Instruments Model 855 Printer data processing (DP) emulation mode. The Model 855 DP emulation mode allows the Model 8900 Series Printer to accept and respond to commands similar to those for common dot-matrix printers. This mode allows the printer to emulate most o ...

  • Epson 8900 Series - page 117

    TI Model 855 Printer DP Emulation 6-4 q Disabling the paper-out detection is not supported. q The escape sequence for font selection is ESC f N. The following table lists the Model 855 DP commands. Model 855 DP Commands Command Name Command Name Printer Operation ESC@ Select DP Mode ESC CR P Select WP Mode ESC SUB I Select WP Mode ESC w Suspend Pri ...

  • Epson 8900 Series - page 118

    TI Model 855 Printer DP Emulation 6-5 Model 855 DP Commands (continued) Command Name Command Name V ertical Motion LF Line Feed FF Form Feed VT T ab V ertically ESC ^ Move Up One-Half Line ESC v Move Down One-Half Line ESC B n1...n16 NUL Set V ertical T ab Stops ESC B NUL Clear All V ertical T ab Stops Character Pitch ESC y Set Character Pitch to 1 ...

  • Epson 8900 Series - page 119

    TI Model 855 Printer DP Emulation 6-6 Model 855DP Commands (concluded) Command Command Name Print Enhancement (continued) ESC G Select Boldface Print ESC H Select Boldface Print ESC E Select Shadow Print ESC F Cancel Shadow Print Color Emulation ESC r n Select color (Epson-JX compatible) ESC c n Select color (TI 857 compatible) Raster Graphics ESC ...

  • Epson 8900 Series - page 120

    TI Model 855 Printer DP Emulation 6-7 Model 855 DP Command Descriptions The following paragraphs describe the TI 855 DP emulation commands. The command formats are listed following each command description. Many of the escape-sequence commands contain one or more variables to specify various command parameters. These variables are italicized in the ...

  • Epson 8900 Series - page 121

    TI Model 855 Printer DP Emulation 6-8 Select Unidirectional Printing Escape sequence: ESC u Hexadecimal: 1B 75 This command causes the printer to print subsequent characters in the forward (left-to-right) direction only . Cancel Unidirectional Printing Escape sequence: ESC b Hexadecimal: 1B 62 Set Most Significant Bit Escape sequence: ESC > Hexa ...

  • Epson 8900 Series - page 122

    TI Model 855 Printer DP Emulation 6-9 Set Form Length to n Lines Escape sequence: ESC C n Hexadecimal: 1B 43 n The variable n is valid for any value in range of 1 through 127 for 7-bit character sets and 1 through 255 for 8-bit character sets. Example. T o set the form length to 60 lines, send the sequence ESC C < (1B 43 3C). Select Font n Escap ...

  • Epson 8900 Series - page 123

    TI Model 855 Printer DP Emulation 6-10 The next character printed following a BS command over-strikes the most recently printed character . In the backward print mode, each BS control character moves the printhead to the right one space. The BS command can cause characters to be printed to the left of the left margin in the forward print mode or to ...

  • Epson 8900 Series - page 124

    TI Model 855 Printer DP Emulation 6-1 1 Move Print Position to Left Margin Escape sequence: ESC < Hexadecimal: 1B 3C This command moves the printhead to the left margin and causes the next print operation to be in the forward direction. Set Horizontal T ab Stops Escape sequence: ESC D n1...n16 NUL Hexadecimal: 1B 44 n1...n16 00 This command clea ...

  • Epson 8900 Series - page 125

    TI Model 855 Printer DP Emulation 6-12 This command advances the paper to the top margin of the next page and causes the printer to perform a carriage return to the left edge (column 1), as set via the form configuration menu. T ab V ertically Contr ol character: VT Hexadecimal: 0B This command advances the paper to the next vertical tab stop. If n ...

  • Epson 8900 Series - page 126

    TI Model 855 Printer DP Emulation 6-13 Set V ertical T ab Stops Escape sequence: ESC B n1...n16 NUL Hexadecimal: 1B 42 n1...n16 00 This command clears all previously set vertical tabulation stops and sets a new stop at each of the lines specified by the variables n1...n16. Each of the variables n1 through n16 can range from 1 through 127 for 7-bit ...

  • Epson 8900 Series - page 127

    TI Model 855 Printer DP Emulation 6-14 Set Line Spacing to 8 lpi Escape sequence: ESC 0 Hexadecimal: 1B 30 Set Line Spacing to 7/72 Inch Escape sequence: ESC 1 Hexadecimal: 1B 31 Set Line Spacing to n/72 Inch Escape sequence: ESC A n Hexadecimal: 1B 41 n The variable n can be any value in the range of 1 through 127. Set Line Spacing to n /216 Inch ...

  • Epson 8900 Series - page 128

    TI Model 855 Printer DP Emulation 6-15 Escape sequence: ESC T Hexadecimal: 1B 54 Select Compressed Print Contr ol character: SI Hexadecimal: 0F Escape sequence: ESC P Hexadecimal: 1B 50 These commands reduce the width of subsequently printed characters to about 60 percent of their normal size. Cancel Compressed Print Contr ol character: DC2 Hexadec ...

  • Epson 8900 Series - page 129

    TI Model 855 Printer DP Emulation 6-16 Cancel Boldface Print Escape sequence: ESC H Hexadecimal: 1B 48 Select Shadow Print Escape sequence: ESC E Hexadecimal: 1B 45 In the shadow print mode, the printer double strikes all characters with a 1/120-inch horizontal offset. Cancel Shadow Print Escape sequence: ESC F Hexadecimal: 1B 46 Color Emulation Se ...

  • Epson 8900 Series - page 130

    TI Model 855 Printer DP Emulation 6-17 T o provide compatibility with TI 857 where n is an ASCII value NUL through ACK (hexadecimal value 00 through 06 or decimal value 0 through 6). n = 0 for black n = 1 for blue n = 2 for red n = 3 for yellow n = 4 for green n = 5 for purple n = 6 for orange Raster Graphics Commands The following paragraphs descr ...

  • Epson 8900 Series - page 131

    IBM Proprinter XL Emulation 7-1 7 IBM Proprinter XL Emulation Introduction .................................................................................... 7-4 IBM Proprinter XL Emulation Commands .................................... 7-5 IBM Proprinter XL Command Descriptions .................................. 7-7 Printer Operation Commands ... ...

  • Epson 8900 Series - page 132

    IBM Proprinter XL Emulation 7-2 Disable Automatic Line Feed ............................................. 7-14 Reverse Line Feed .............................................................. 7-14 Set V ertical T ab Stops ......................................................... 7-14 Clear V ertical T ab Stops ...................................... ...

  • Epson 8900 Series - page 133

    IBM Proprinter XL Emulation 7-3 Cancel Subscript Print ........................................................ 7-19 Enable/Disable Double-High Double-W ide Print .............. 7-20 Considerations for Using Enable/Diasble Double-High Double-W ide Print ...................................... 7-20 Raster Graphics Commands ........................... ...

  • Epson 8900 Series - page 134

    IBM Proprinter XL Emulation 7-4 Introduction This chapter describes the IBM Proprinter XL emulation mode. This emulation mode is selectable from the printer setup menu described in Chapter 2. This mode enables your printer to emulate most of the functions of the IBM Proprinter XL with the following considerations: q The Proprinter XL emulation supp ...

  • Epson 8900 Series - page 135

    IBM Proprinter XL Emulation 7-5 IBM Proprinter XL Emulation Commands Y our printer , when operating in the IBM Proprinter XL emulation mode, can respond to both escape-sequence commands and the standard US ASCII control characters. The following table lists the IBM Proprinter XL printer commands. IBM Proprinter XL Commands Command Command Name Prin ...

  • Epson 8900 Series - page 136

    IBM Proprinter XL Emulation 7-6 IBM Proprinter XL Commands (continued) Command Command Name V ertical Motion LF Line Feed FF Form Feed VT T ab V ertically ESC J n Perform n /216 Inch Line Feed ESC 5 SOH Enable Automatic Line Feed ESC 5 NUL Disable Automatic Line Feed ESC ] Reverse Line Feed ESC B n1...n64 NUL Set V ertical T ab Stops ESC B NUL Clea ...

  • Epson 8900 Series - page 137

    IBM Proprinter XL Emulation 7-7 IBM Proprinter XL Commands (concluded) Command Command Name Print Enhancement (continued) ESC - NUL Cancel T ext-Underline Print ESC _ SOH Select T ext-Overscore Print ESC _ NUL Cancel T ext-Overscore Print ESC G Select Boldface Print ESC H Cancel Boldface Print ESC E Select Shadow Print ESC F Cancel Shadow Print ESC ...

  • Epson 8900 Series - page 138

    Select Printer Contr ol character: DC1 Hexadecimal: 11 This command reselects the printer after it has received a Deselect Printer command, unless the printer has been placed offline via the control panel On Line switch. Note: Some IBM computers and IBM-compatible computers set parallel interface pin 36 low; this condition disables the DC1 command. ...

  • Epson 8900 Series - page 139

    IBM Proprinter XL Emulation 7-9 Cancel Unidirectional Printing Escape sequence: ESC U NUL Hexadecimal: 1B 55 00 Form Format and Margin Control Commands The form format commands let you select and set some form-related parameters. A single margin control command lets you set the left and right margin positions. Set Form Length to n Lines Escape sequ ...

  • Epson 8900 Series - page 140

    IBM Proprinter XL Emulation 7-10 Select Automatic Perforation Skip Escape Sequence: ESC N n Hexadecimal: 1B 4E n This command causes the printer to perform the following actions. 1. Skip the number of lines specified by the variable n and the current form parameter settings. 2. Print the next line at the first print line position of the following f ...

  • Epson 8900 Series - page 141

    IBM Proprinter XL Emulation 7-1 1 Horizontal Motion Commands The horizontal motion commands control the horizontal motion of the printhead, including the direction and distance of each movement. Backspace Contr ol character: BS Hexadecimal: 08 This command causes the printer to print the current contents of the print buf fer and then move the print ...

  • Epson 8900 Series - page 142

    IBM Proprinter XL Emulation 7-12 Set Horizontal T ab Stops Escape sequence: ESC D n1...n28 NUL Hexadecimal: 1B 44 n1...n28 00 This command clears all previously set horizontal tab stops and sets a new tab stop at each of the columns specified by the variables n1...n28. These variables must be listed in ascending order; that is, the value of each va ...

  • Epson 8900 Series - page 143

    IBM Proprinter XL Emulation 7-13 Form Feed Contr ol character: FF Hexadecimal: 0C The Form Feed command causes the printer to print the current contents of the print buffer and then move the print-head to the first print line of the next form. T ab V ertically Contr ol character: VT Hexadecimal: 0B This command advances the print position verticall ...

  • Epson 8900 Series - page 144

    IBM Proprinter XL Emulation 7-14 Disable Automatic Line Feed Escape sequence: ESC 5 NUL Hexadecimal: 1B 35 00 Reverse Line Feed Escape sequence: ESC ] Hexadecimal: 1B 5D Set V ertical T ab Stops Escape sequence: ESC B nl...n64 NUL Hexadecimal: 1B 42 n1...n64 00 This command sets up to 64 vertical tab stops (in the current line spacing). Subsequent ...

  • Epson 8900 Series - page 145

    IBM Proprinter XL Emulation 7-15 Set Character Pitch to 12 cpi Escape sequence: ESC : Hexadecimal: 1B 3A This command selects 12 cpi character pitch for either draft or LQ printing. Select Programmable Line Spacing Escape sequence: ESC 2 Hexadecimal: 1B 32 This command invokes the line spacing value stored in memory by the Set Line Spacing to n /72 ...

  • Epson 8900 Series - page 146

    IBM Proprinter XL Emulation 7-16 Character Set Commands The character set commands let you choose between the IBM PC1 and IBM PC2 character sets and print specified characters from either of these character sets. Select PC1 Character Set Escape sequence: ESC 7 Hexadecimal: 1B 37 Select PC2 Character Set Escape sequence: ESC 6 Hexadecimal: 1B 36 Pri ...

  • Epson 8900 Series - page 147

    IBM Proprinter XL Emulation 7-17 Print Enhancement Commands The print enhancement commands enable your printer to improve or enhance the print quality . Print enhancements include such things as superscript and subscript text, text underlining and overscoring, and emphasized print to make the print appear bolder . The following paragraphs describe ...

  • Epson 8900 Series - page 148

    IBM Proprinter XL Emulation 7-18 Cancel Compressed Print Contr ol character: DC2 Hexadecimal: 12 Select Letter-Quality Print Escape sequence: ESC I STX Hexadecimal: 1B 49 02 Escape sequence: ESC I ACK Hexadecimal: 1B 49 06 Cancel Letter-Quality Print Escape sequence: ESC I NUL Hexadecimal: 1B 49 00 Escape sequence: ESC I EOT Hexadecimal: 1B 49 04 S ...

  • Epson 8900 Series - page 149

    IBM Proprinter XL Emulation 7-19 Cancel Boldface Print Escape sequence: ESC H Hexadecimal: 1B 48 Select Shadow Print Escape sequence: ESC E Hexadecimal: 1B 45 Cancel Shadow Print Escape sequence: ESC F Hexadecimal: 1B 46 Select Superscript Print Escape sequence: ESC S NUL Hexadecimal: 1B 53 00 After receiving this command the printer prints each su ...

  • Epson 8900 Series - page 150

    IBM Proprinter XL Emulation 7-20 Enable/Disable Double-High Double-Wide Print Escape sequence: ESC [ @ n1 n2 n3 n 4 m1 m2 Hexadecimal: 1B 5B 40 n1 n2 n3 n4 m1 m2 where: n1 n2 = byte count; format is (n1 + (n2 * 256)) n3 n4 = no function, ignored m1 = line spacing and character height m2 = character width This command selects double-high printing in ...

  • Epson 8900 Series - page 151

    IBM Proprinter XL Emulation 7-21 m1 data byte, bit 0 is least significant bits 0 and 1 = 00 current character height 01 standard character height 10 double character height 1 1 current character height bits 2 and 3 = X X don’t care bits 4 and 5 = 0 0 current line spacing 01 single line spacing 10 double line spacing 1 1 current line spacing bits ...

  • Epson 8900 Series - page 152

    IBM Proprinter XL Emulation 7-22 Select 60 dpi Graphics Escape sequence: ESC K n1 n2 Hexadecimal: 1B 4B n1 n2 This command selects the 8-pin, 60 dpi graphics mode for the horizontal line length specified by the two-byte variable n1 n2. Select 120 dpi Graphics Escape sequence: ESC L n1 n2 Hexadecimal: 1B 4C n1 n2 This command selects the 8-pin, 120 ...

  • Epson 8900 Series - page 153

    Epson FX Printer Emulation Mode 8-1 8 Epson FX Printer Emulation Mode Introduction .................................................................................... 8-4 Epson FX Printer Emulation Commands ....................................... 8-6 Epson FX Emulation Command Descriptions ............................... 8-9 Printer Operation Comm ...

  • Epson 8900 Series - page 154

    Epson FX Printer Emulation Mode 8-2 Horizontal Motion Commands ................................................ 8-17 Backspace ........................................................................... 8-17 T ab Horizontally ................................................................. 8-17 Carriage Return ..................................... ...

  • Epson 8900 Series - page 155

    Epson FX Printer Emulation Mode 8-3 Enable Character Positions 0-31 and 128-159 as Printable Characters ......................................................... 8-26 Disable Character Positions 0-31 and 128-159 as Printable Characters ......................................................... 8-26 Print Enhancement Commands ........................ ...

  • Epson 8900 Series - page 156

    Epson FX Printer Emulation Mode 8-4 Introduction This chapter describes the Epson FX printer emulation mode. This emulation mode is selectable from the printer setup menu as described in Chapter 2. This mode enables your printer to emulate most of the functions of an Epson FX printer with the following considerations: q The escape sequence for font ...

  • Epson 8900 Series - page 157

    Epson FX Printer Emulation Mode 8-5 — Slashed zeros — OFF — The last form setting change made via the control panel is retained and restored at power -up. — The right-half character set defaults to PC1 at power-up. q The following escape sequences are not supported: — The download characters command sequence ESC & NUL data — The cop ...

  • Epson 8900 Series - page 158

    Epson FX Printer Emulation Mode 8-6 Epson FX Printer Emulation Commands Y our printer , when operating in the Epson FX emulation mode, can respond to both escape-sequence commands and the standard US ASCII control characters. The following table lists the FX printer commands. Epson FX Emulation Commands Command Command Name Printer Operation DC1 Se ...

  • Epson 8900 Series - page 159

    Epson FX Printer Emulation Mode 8-7 Epson FX Emulation Commands (continued) Command Command Name Horizontal Motion BS Backspace HT T ab Horizontally CR Carriage Return ESC $ n1 n2 Set Absolute Print Position ESC n1 n2 Set Relative Print Position ESC D nl...n32 NUL Set Horizontal T ab Stops ESC D NUL Clear All Horizontal T ab Stops V ertical Motio ...

  • Epson 8900 Series - page 160

    Epson FX Emulation Commands (continued) Command Command Name Character Set (continued) ESC I SOH Enable Character Positions 0-31 and 128-159 as Printable Characters ESC I NUL Disable Character Positions 0-31 and 128-159 as Printable Characters Print Enhancement SO Select Expanded Print for One Line ESC SO Select Expanded Print for One Line DC4 Canc ...

  • Epson 8900 Series - page 161

    Epson FX Printer Emulation Mode 8-9 Epson FX Emulation Commands (concluded) Command Command Name Raster Graphics ESC K n1 n2 Select 60 dpi Graphics ESC ^ NUL n1 n2 Select 9-Pin 60 dpi Graphics ESC L n1 n2 Select 120 dpi Graphics ESC ^ SOH n1 n2 Select 9-Pin 120 dpi Graphics ESC Y nl n2 Select High-Speed, 120 dpi Graphics ESC Z n1 n2 Select 240 dpi ...

  • Epson 8900 Series - page 162

    Epson FX Printer Emulation Mode 8-10 Select Printer Contr ol character: DC1 Hexadecimal: 11 This command reselects the printer after it has received a Deselect command, unless the printer has been placed offline via the control panel On Line switch. Deselect Printer Contr ol character: DC3 Hexadecimal: 13 This command sets the printer to its desele ...

  • Epson 8900 Series - page 163

    Epson FX Printer Emulation Mode 8-1 1 Initialize Printer Escape sequence: ESC @ Hexadecimal: 1B 40 This command resets the printer to its initial state and clears the print buffer of all printable data from the last line printed before the command was received. Set Most Significant Bit to Zero Escape sequence: ESC = Hexadecimal: 1B 3D Some computer ...

  • Epson 8900 Series - page 164

    Epson FX Printer Emulation Mode 8-12 Cancel Most Significant Bit Control Escape sequence: ESC # Hexadecimal: 1B 23 This command cancels printer control of the received character MSB and returns control to the computer . This enables the computer to select characters from either the GL half or the GR half of the selected printer character set. Selec ...

  • Epson 8900 Series - page 165

    Epson FX Printer Emulation Mode 8-13 Form Format Commands The form format commands let you set the form length in either lines or inches. These commands also let you enable or disable the automatic perforation skip feature. Set Form Length to n Lines Escape sequence: ESC C n Hexadecimal: 1B 43 n This command sets the form length to the number of li ...

  • Epson 8900 Series - page 166

    Epson FX Printer Emulation Mode 8-14 Example. If the current form length setting is 66 lines and the current line spacing is 6 lpi, setting the value of n to 6 causes the printer to do the following. 1. Print 60 lines on the current form. 2. Skip 6 lines at the bottom of the current form. 3. Print the next text line at the first print line position ...

  • Epson 8900 Series - page 167

    Epson FX Printer Emulation Mode 8-15 Margin Control Commands The margin control commands let you set parameters related to the left, right, bottom, and top margins and control print justification and text centering. Select Left Margin Justification Escape sequence: ESC a NUL Hexadecimal: 1B 61 00 This command causes the printer to justify any subse ...

  • Epson 8900 Series - page 168

    Epson FX Printer Emulation Mode 8-16 Set Left Margin at Column n Escape sequence: ESC 1 n Hexadecimal: 1B 6C n This command sets the left margin at the position specified by the variable n. The minimum distance between the left and right margins is the width of one expanded 10 cpi character . Invoking this command clears all previously set horizont ...

  • Epson 8900 Series - page 169

    Epson FX Printer Emulation Mode 8-17 Horizontal Motion Commands The horizontal motion commands control the horizontal motion of the printhead, including direction and distance of each movement. The following paragraphs describe the horizontal motion commands. Backspace Contr ol character: BS Hexadecimal: 08 This command causes the printer to print ...

  • Epson 8900 Series - page 170

    Epson FX Printer Emulation Mode 8-18 Set Absolute Print Position Escape sequence: ESC $ n1 n2 Hexadecimal: 1B 24 n1 n2 This command sets the first character position of subsequently printed text at 1/60 inch or some multiple of 1/60 inch from the currently set left margin. The variables n1 and n2 form a two-byte hexadecimal value that specifies the ...

  • Epson 8900 Series - page 171

    Epson FX Printer Emulation Mode 8-19 Set Horizontal T ab Stops Escape sequence: ESC D n1...n32 NUL Hexadecimal: 1B 44 n1...n32 00 This command clears all previously set horizontal tab stops and sets a new tab stop at each of the columns specified by the variables n1...n32. Each of the variables n1 and n2 can be any value in the range of 1 through 1 ...

  • Epson 8900 Series - page 172

    Epson FX Printer Emulation Mode 8-20 Form Feed Contr ol character: FF Hexadecimal: 0C This command causes the printer to print the current print buffer contents and then move the printhead to the first print line of the next form. T ab V ertically Contr ol character: VT Hexadecimal: 0B This command advances the print position vertically to the next ...

  • Epson 8900 Series - page 173

    Epson FX Printer Emulation Mode 8-21 Select V ertical T ab Channel Escape sequence: ESC / c Hexadecimal: 1B 2F c This command selects one of the eight preset VTCs. The printer subsequently uses this VTC for all vertical tab operations. The variable c specifies the VTC number (0 through 7). Set VTC T ab Stops Escape sequence: ESC b c n1...n16 NUL He ...

  • Epson 8900 Series - page 174

    Epson FX Printer Emulation Mode 8-22 Character Pitch Commands The character pitch commands let you choose between 10 and 12 cpi or adjust the horizontal spacing between characters. The character pitch is the horizontal distance from the center of one character to the center of the next character . Set Character Pitch to 10 cpi Escape sequence: ESC ...

  • Epson 8900 Series - page 175

    Epson FX Printer Emulation Mode 8-23 Line Spacing Commands The line spacing commands let you choose between line spacing values of 6 or 8 lpi or any of several fractional line spacing values. The line spacing is the vertical distance between print lines. Set Line Spacing to 6 lpi Escape sequence: ESC 2 Hexadecimal: 1B 32 This command sets the line ...

  • Epson 8900 Series - page 176

    Epson FX Printer Emulation Mode 8-24 Set Line Spacing to n /216 Inch Escape sequence: ESC 3 n Hexadecimal: 1B 33 n This command sets the line spacing to a value in the range of 0/216 through 255/216 (0 through 1.18) inches for subsequent line feed operations. Character Set Commands The character set commands enable you to select and use the standar ...

  • Epson 8900 Series - page 177

    Epson FX Printer Emulation Mode 8-25 Select International Character Set Escape sequence: ESC R n Hexadecimal: 1B 52 n This command selects, for either draft or LQ printing, the international version of the ASCII character set specified by the variable n . The variable n can be any of the following values. 0 USA 7 Spain I 1 France 8 Japan 2 Germany ...

  • Epson 8900 Series - page 178

    Epson FX Printer Emulation Mode 8-26 Enable Character Positions 0-31 and 128-159 as Printable Characters Escape sequence: ESC I SOH Hexadecimal: 1B 49 01 This command enables the printer to treat the characters in character positions 0-31 (C0 control characters) and 128-159 (C1 control characters) as printable characters. Disable Character Position ...

  • Epson 8900 Series - page 179

    Epson FX Printer Emulation Mode 8-27 Cancel Expanded Print Contr ol character: DC4 Hexadecimal: 14 This command cancels the expanded print mode previously selected by the Select Expanded Print for One Line commands (SO or ESC SO). However , this command does not af fect the expanded print mode invoked by the Select Expanded Print command ESC W SOH ...

  • Epson 8900 Series - page 180

    Epson FX Printer Emulation Mode 8-28 These commands cause the printer to print characters at about 60 percent of their normal widths. For example, for a character pitch of 10 cpi, one inch of text contains about 17 characters instead of the normal 10. These commands are valid for either draft or LQ printing. Cancel Compressed Print Contr ol charact ...

  • Epson 8900 Series - page 181

    Epson FX Printer Emulation Mode 8-29 Cancel Boldface Print Escape sequence: ESC H Hexadecimal: 1B 48 Select Shadow Print Escape sequence: ESC E Hexadecimal: 1B 45 Cancel Shadow Print Escape sequence: ESC F Hexadecimal: 1B 46 Select Superscript Print Escape sequence: ESC S NUL Hexadecimal: 1B 53 00 This command selects the superscript print mode for ...

  • Epson 8900 Series - page 182

    Select Italic Print Escape sequence: ESC 4 Hexadecimal: 1B 34 This command causes the printer to print characters from the Epson italic character set for either draft or LQ printing. This command is valid even if the printer has received an ESC t SOH command to invoke the Epson extended graphics character set; however , character graphics cannot be ...

  • Epson 8900 Series - page 183

    Epson FX Printer Emulation Mode 8-31 T o select a valid combination of the listed character pitches and print modes, choose the items you wish to combine and add their values to find the correct value of n . After finding the decimal value of n , convert this value to its hexadecimal equivalent for use in the escape sequence. For example, to select ...

  • Epson 8900 Series - page 184

    Epson FX Printer Emulation Mode 8-32 Select 9-Pin 60 dpi Graphics Escape sequence: ESC ^ NUL n1 n2 Hexadecimal: 1B 5E 00 n1 n2 This command causes the printer to print 9-pin graphics at 60 dpi. Select 120 dpi Graphics Escape sequence: ESC L n1 n2 Hexadecimal: 1B 4C n1 n2 This command selects the 8-pin, 120 dpi graphics mode for the horizontal dista ...

  • Epson 8900 Series - page 185

    Epson FX Printer Emulation Mode 8-33 Select Graphics Mode m Escape sequence: ESC * mn 1 n 2 Hexadecimal: 1B 2A mn 1 n 2 This command selects the graphics mode specified by the variable m for the horizontal distance specified by the two-byte variable n1 n2. The variable m can be any of the following values. q NUL — 60 dpi normal speed q SOH — 12 ...

  • Epson 8900 Series - page 186

    Optional Emulation Commands 9-1 9 Optional DEC LA 120 Emulation Introduction .................................................................................... 9-2 DEC LA120 Emulation Commands ............................................... 9- 2 Answerback Memory Function ...................................................... 9-5 New Line Mode .. ...

  • Epson 8900 Series - page 187

    Optional Emulation Commands 9-2 Introduction This chapter describes the optional DEC LA120 emulation mode. An optional emulation mode is selectable from the printer setup menu described in Chapter 2 or by global commands described in Chapter 3. DEC LA120 Emulation Commands This mode enables your printer to emulate most of the functions of the DEC L ...

  • Epson 8900 Series - page 188

    Optional Emulation Commands 9-3 DEC LA120 Commands (continued) Command Command Name Form Format and Margin Control ESC [ N t Set Form Length to N Lines ESC [ N r Set T op Margin to Line N ESC [ ; N r Set Bottom Margin to Line N ESC [ N 1 ; N 2 r Set T op and Bottom Margins to Line N 1 and Line N 2 ESC [ N s ESC [ N ; 0 s ESC [ ; N s ESC [ 0 ; N s E ...

  • Epson 8900 Series - page 189

    Optional Emulation Commands 9-4 DEC LA120 Commands (concluded) Command Command Name Horizontal Pitch Sequences (continued) ESC [ 2 w Set Character Pitch to 12 cpi ESC [ 3 w Set Character Pitch to 13.2 cpi ESC [ 4 w Set Character Pitch to 16.7 cpi V ertical T ab Sequences ESC [ N d Set Active Line to Line N ESC [ N e Advance Active Line Forward to L ...

  • Epson 8900 Series - page 190

    DEC LA120 Commands Not Recognized in DEC LA120 Emulation Command Command Name ESC = Enable Alternate Keyboard ESC > Disable Alternate Keyboard EOT End of T ransmission SUB Substitute DLE Data Link Escape Answerback Memory Function The DEC LA120 emulation provides, as an LA120 feature, an answerback memory (ABM) that can be programmed with a mess ...

  • Epson 8900 Series - page 191

    When LF NEW LINE is selected and a line feed command is received, a carriage return is performed in addition to the line feed. Carriage returns are also performed with vertical tabs and form feeds when LF NEW LINE is selected. For the NO NEW LINE selection, a carriage return only is performed upon receipt of a carriage return control code, and a li ...

  • Epson 8900 Series - page 192

    Communication Interfaces 10-1 Introduction .................................................................................. 10-3 Data-T ransfer Operations ............................................................. 10-4 Parallel Communication Interface ................................................ 10-6 Parallel Interface Signal Descriptions ...

  • Epson 8900 Series - page 193

    Communication Interfaces 10-2 Interface Data T ransmission Rate .......................................... 10-18 Serial Data Format ................................................................. 10-18 Serial Interface Busy-Handling Protocols ............................. 10-20 Flow-Control Busy-Handling Protocols ........................... 10-2 ...

  • Epson 8900 Series - page 194

    Communication Interfaces 10-3 Introduction This chapter describes the communication interfaces and provides information about their use with your printer . The communication interface transfers data in a fixed and orderly manner between the host and the printer . Communication interfaces are of two general types: parallel and serial. Parallel inter ...

  • Epson 8900 Series - page 195

    Communication Interfaces 10-4 The following figure shows simplified block diagrams of two types of data-communication systems and their associated communication interfaces. The long-distance system typically uses telephone lines to transfer data from the host to the printer . Because this system is limited to bit-serial data-transfer operations, it ...

  • Epson 8900 Series - page 196

    Communication Interfaces 10-5 The following figure shows a simplified block diagram of the printer receive buffer and the data path between the host and the print mechanism. The host transfers characters in the form of 7-bit or 8-bit data bytes, depending on which character set is selected. T o ensure that no data is lost between the host and the p ...

  • Epson 8900 Series - page 197

    Communication Interfaces 10-6 Parallel Communication Interface The parallel communication interface uses a 36-pin connector (shown in the following figure) that transfers both data and control signals between the printer and the host computer . The parallel interface connector is located at the rear of the printer and provides bail latches to secur ...

  • Epson 8900 Series - page 198

    Communication Interfaces 10-7 Parallel Interface Signals Signal Name Pin Return Source STROBE- Data strobe 1 19 Host DA T A1 Data bit 1 2 20 Host DA T A2 Data bit 2 3 21 Host DA T A3 Data bit 3 4 22 Host DA T A4 Data bit 4 5 23 Host DA T A5 Data bit 5 6 24 Host DA T A6 Data bit 6 7 25 Host DA T A7 Data bit 7 8 26 Host DA T A8 Data bit 8 9 27 Host A ...

  • Epson 8900 Series - page 199

    Communication Interfaces 10-8 Data Signals Character transfers from the host to the receiver consist of 8-bit data bytes (DA T Al through DA T A8) traveling in parallel over the eight data lines. DA T Al is the least significant bit and DA T A8 is the most significant bit. If a 7-bit character set has been selected, the DA T A8 line remains low for ...

  • Epson 8900 Series - page 200

    Communication Interfaces 10-9 Busy Signal This active-high signal from the printer indicates that the printer is busy and cannot accept additional data. During data-transfer operations, the leading edge of the host-generated strobe signal activates BUSY for each character-transfer cycle. The printer sends an acknowledge pulse and deactivates BUSY a ...

  • Epson 8900 Series - page 201

    Communication Interfaces 10-10 Paper-Empty Signal The paper-empty (PE) signal from the printer indicates that the paper supply is empty . The printer activates this signal in combination with the fault signal to indicate the paper-empty condition to the host. Select Signal The select (SLCT) signal from the printer indicates to the host that the pri ...

  • Epson 8900 Series - page 202

    Communication Interfaces 10-1 1 The following figure shows the timing sequence for host-to-printer character-transfer operations. The table on the following page lists the timing requirements for the operation. The reference points, a through h in the preceding figure, are keyed to the table on the following page and to the following character-tran ...

  • Epson 8900 Series - page 203

    Communication Interfaces 10-12 3. The printer activates ACK- ( e ) to signal the host that the receive buffer has received the character . 4. If the character does not fill the receive buffer , the printer deactivates BUSY and ACK- ( f ) to notify the host that the transfer operation is complete. The host can then initiate another data-transfer cyc ...

  • Epson 8900 Series - page 204

    Communication Interfaces 10-13 Parallel Interface Timing Requir ements (continued) Item Ref. T iming Requirements f T railing edge must occur before the host can strobe the next character into the receive bu ff er . For normal write cycles (receive buffer not full), this occurs at 10 µ s min., 500 µ s nom., and 1000 µ s max. after the leading ed ...

  • Epson 8900 Series - page 205

    Communication Interfaces 10-14 Error Conditions F AUL T- and PE are printer status lines. The printer activates F AUL T- to indicate a mechanism failure, such as a paper jam, and deactivates it when the error is corrected. After the paper supply is depleted, the printer activates both PE (paper empty) and F AUL T- to indicate the paper-empty condit ...

  • Epson 8900 Series - page 206

    Serial Interface Connector The serial communication interface transfers either 7-bit or 8-bit character information in an asynchronous, bit-serial format. This format is useful for transferring data over long distance lines via data communication devices such as modems, but it can also be used to transfer data directly between the host and the prin ...

  • Epson 8900 Series - page 207

    Communication Interfaces 10-16 Interface Signal Descriptions The following paragraphs describe the serial interface signals. Protective Ground The protective ground (PG) line is connected directly to the power cord ground to provide protection for the equipment and personnel. Signal Ground The signal ground (SG) line is connected to the printer pow ...

  • Epson 8900 Series - page 208

    Communication Interfaces 10-17 Clear to Send Signal The host computer generates the clear to send (CTS) signal to indicate that it can receive data from the printer . In the DIRECT CONNECT mode, the printer ignores this signal. In the MODEM CONNECT mode, CTS must be on for the printer to send data. If the interface cable does not provide a connecti ...

  • Epson 8900 Series - page 209

    Communication Interfaces 10-18 Interface Data T ransmission Rate Because data-transfer operations on the serial interface occur in a bit-serial fashion, the data transmission rate is measured in bits per second, commonly called the baud rate. T o provide compatibility with a variety of systems, your printer offers the following range of baud rates. ...

  • Epson 8900 Series - page 210

    Communication Interfaces 10-19 In addition to the data bits, each character contains the following bits. q Start bit — A bit immediately preceding the character bits that signals the start of the asynchronous data transmission. q Parity bit — A bit immediately following the character bits that allows the printer to check the integrity of the re ...

  • Epson 8900 Series - page 211

    Communication Interfaces 10-20 Serial Interface Busy-Handling Protocols The serial interface provides several methods for the printer to indicate its ready and busy conditions. The communication interface menu, described in Chapter 2 of this manual, allows you to select any of these methods during printer setup. The following paragraphs describe th ...

  • Epson 8900 Series - page 212

    Communication Interfaces 10-21 This busy-handling protocol should not be selected for an emulator that requires that ETX be used as a graphics character or as part of a printer command. Direct-Connect Busy-Handling Protocols The control panel menu structure offers the following choices of busy-handling protocols for use with a serial interface conn ...

  • Epson 8900 Series - page 213

    RS-422 Communication Interface The RS-422 serial communication interface handles data structures of the same format as those for the serial communication interface. However , the RS-422 interface can transfer data over distances of up to 4000 feet (1219 meters) with minimal noise interference. Current Loop Communication Interface The current loop ( ...

  • Epson 8900 Series - page 214

    Application Instructions A-1 Z-Axis Adjustment Escape Sequence Introduction The Model 8900 Series Printers sense top, left, and right edges plus thickness when a form is loaded. These settings provide the location of printout on the form such as top, bottom, left, and right margins and locations of labels or uneven edges. Caution: Some forms or for ...

  • Epson 8900 Series - page 215

    Application Instructions A-2 Considerations for Z-Axis Adjustments The following considerations (plus DOs and DON’T s) should be given for Z-axis adjustments. Caution: This escape sequence is designed for use by technically oriented software users to print on forms with multiple thicknesses and is not intended for the casual user . Damage to the ...

  • Epson 8900 Series - page 216

    Application Instructions A-3 q V alid Z-axis adjustment values are 00 through 99 from the automatic Z-axis initialization adjustment (00) in positive or negative directions (-99 through +99). q Note the location of the Z-axis initialization whenever paper stock is changed or tractors are moved, to determine the 00 calibration and corresponding numb ...

  • Epson 8900 Series - page 217

    Application Instructions A-4 Escape Sequence — Z-Axis Printhead Position Escape sequence: ESC DLE zS N N Hexadecimal: 1B 10 7A SN N where: S = “+” or “-” as the sign of the displacement (positive or negative). NN = ASCII values of the two digit number of the range from initialization. Note: The escape sequence ESC DLE z, followed by any c ...

  • Epson 8900 Series - page 218

    Application Instructions A-5 880 Emulation Commands For 880 emulation, send the following code and text. Note: For this example, printing can be continuous, within the margins, on every line of the page. ESC [ 7 ; 54 r — prints first print line on line 7, last print line at line 54. ESC [ 1 1 ; 75 s — sets first print column at column 11, and l ...

  • Epson 8900 Series - page 219

    Index 1 a adjusting the Z-axis position .................... 3-29 answerback memory DEC LA120 emulation ...................... 9-5 answerback memory message load ...................................... 9-6 auto wrap .................................................... 9-6 b barcode operations .................................... 3-20 baud rate ..... ...

  • Epson 8900 Series - page 220

    communication interface optional .................................. 1-4, 10-21 parallel .............................................. 10-6 serial ............................................... 10-14 standard .............................................. 1-4 compressed print .......... 5-19, 6-15, 7-17, 8-27 conditions, error .................... ...

  • Epson 8900 Series - page 221

    Index 3 j justification full .................................................... 8-15 left margin ........................................ 8-15 right margin ................... 5-12, 5-14, 8-15 l language, LCD .......................................... 2-17 length, form .................................... 4-14, 5-1 1 letter-quality print ........ ...

  • Epson 8900 Series - page 222

    Index 4 printer features ............................................ 1-3 printing bidirectional ..................................... 8-12 color ......................................... 1-4, 3-22 reverse .............................................. 5-10 unidirectional ........................ 4-14, 5-10, ........................................ ...

  • Epson 8900 Series - page 223

    Index 5 u unidirectional printing ................... 4-14, 5-10, ........................................... 6-8, 7-8, 8-12 v variables .................................................... 4-10 vertical line spacing .................................. 4-27 vertical motion index (VMI) ............ 5-5, 5-18 vertical tab channel ..................... ...

  • Epson 8900 Series - page 224

    PF Scan Line Setup in 144th-inch increments. Range is 1.5” to 10” Right Edge Line W idth Page Finder Scan Line P / O Detection Overdrive Comp. Reset Form adjust adjust Standard adjust Con- tinuous AN o TOF Only BY e s Disabled C Pre- printed Form Config Form Select Print Qual. Paper Path A B C D F G H I J Print Report E 12 15 16.7 10 T ext L.Q. ...

Manufacturer Epson Category Printer

Documents that we receive from a manufacturer of a Epson 8900 Series can be divided into several groups. They are, among others:
- Epson technical drawings
- 8900 Series manuals
- Epson product data sheets
- information booklets
- or energy labels Epson 8900 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson 8900 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson 8900 Series, service manual, brief instructions and user manuals Epson 8900 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson 8900 Series.

Similar manuals

A complete manual for the device Epson 8900 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson 8900 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson 8900 Series.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson 8900 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson 8900 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson 8900 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Epson 8900 Series - which should help us in our first steps of using Epson 8900 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson 8900 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson 8900 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson 8900 Series?

Use the form below

If you did not solve your problem by using a manual Epson 8900 Series, ask a question using the form below. If a user had a similar problem with Epson 8900 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)