Manual Axis PS-24

16 pages 3.13 mb
Download

Go to site of 16

Summary
  • Axis PS-24 - page 1

    ENGLISH DEUTSCH PS-24 Mains Adaptor Installation Guide ...

  • Axis PS-24 - page 2

    ...

  • Axis PS-24 - page 3

    PS-24 Mains Adaptor ENGLISH Mount the PS-24 box usin g the supplied holders Package contents: a) 4 holders b) 4 wood screws c) 4 screws for holders d) 4 concrete plugs (5mm drill) e) 4 concrete screws Using the supplied scre ws (c) , attach the plastic holders (a) to the PS-24 box. Using the appropriate screws for the wall material (wood or concret ...

  • Axis PS-24 - page 4

    PS-24 Mains Adaptor Alternative installation - PSU box The vandal-proof PSU box is an optional acce ssory which can be mounted either on a pole or on a flat surface. 1. Remove the top lid of the PSU box by removing the 4 screws. 2. Place the PS-24 with the 4 cable glands in the opening at the bottom of the PSU box. 3. Replace the lid and lock it by ...

  • Axis PS-24 - page 5

    PS-24 Mains Adaptor ENGLISH PS-24 Mains Power Adaptor Important! • Warning - high voltage. Read through the instructions be fore starting the installation. The electrical connection should be made by an authorized el ectrician. Please observe relevant na tional and local regulations for the installation. • AXIS PS-24 is designed to be part of a ...

  • Axis PS-24 - page 6

    PS-24 Mains Adaptor Connect power to the PS-24 1. Remove the lid of the power su pply by removing the 4 screws. 2. Mak e sure the power switch is set to ‘0’ (off) . Important! The power switch does not break on both poles at the AC input. The power switch shall only be used to turn the camera on/off. When the power switch is set to off, high vo ...

  • Axis PS-24 - page 7

    PS-24 Mains Adaptor ENGLISH Connect the AXIS 231D/232D po wer and alarm inputs/outputs This document describes how to install the AX IS 231D/232D and the PS-24. Please refer to the AXIS 231D/232D Installation Guide for further instructions. Connect the dome came ra to the power su pply and alarm inputs/outputs* using the connection cable supplied w ...

  • Axis PS-24 - page 8

    PS-24 Mains Adaptor Connect the AXIS 225FD po wer and alarm input/output This document describes how to install the AXIS 225FD and the PS-24. Please refer to the AXIS 225FD Installation Guide for further instructions. Connect the camera to the power supply and al arm input/output* (cab les not supplied). For information on the recommended cable dim ...

  • Axis PS-24 - page 9

    PS-24-Versorgungsnetzteil DEUTSCH Verwenden Sie zur Montage des PS-2 4-Gehäuses die mitgelieferten Halterungen Lieferumfang: a) 4 Halterungen b) 4 Holzschrauben c) 4 Schrauben für Halterungen d) 4 Betondübel (5-mm-Bohrer) e) 4 Betonschrau b en Befestigen Sie die Halterungen (a) mit den vorgesehenen Schrauben (c) am PS-24-Gehäuse. Montieren Sie ...

  • Axis PS-24 - page 10

    PS-24-Versorgungsnetzteil Alternative Installation – PSU-Gehäuse Das zerstörungssiche re PSU-Gehäuse (optionales Zubehör) kann auf glatten Oberflächen und an Masten montiert werden. 1. Lösen Sie zu m Öffnen des PSU-Gehäu ses die 4 Befestigungsschrauben. 2. Legen Sie das PS-24-Netzteil so in das PSU-Gehäuse ein, dass die Anschlussmuffen i ...

  • Axis PS-24 - page 11

    PS-24-Versorgungsnetzteil DEUTSCH PS-24-Versorgungsnetzteil Wichtig! • Achtung! Hochspannung! Lesen Sie die Bedienungsanleitung, bevor Sie mit der Montage beginnen. Elektroarbeiten müsse n von einem ausgebildeten Ele ktriker ausgeführt werden. Be achten Sie bei der Montage die geltenden regionalen und nationalen Gesetze und Richtlinien. • AXI ...

  • Axis PS-24 - page 12

    PS-24-Versorgungsnetzteil PS-24 an das Stromnetz anschließen 1. Lösen Sie zum Öffnen der Gehäusek lappe die 4 Befest igungsschr auben. 2. Schalten Sie den Net zscha lter auf ‚0‘ (Aus) . Wichtig! Der Netzschalter unterbricht nicht beide Pole de s Wechselstromeingangs. Er dient lediglich zum Aus-/Einschalten der Kamera . Auch wenn der Netzsch ...

  • Axis PS-24 - page 13

    PS-24-Versorgungsnetzteil DEUTSCH Versorgungs- und Signalleitung en für AXIS 231D/232D anschließen In diesem Dokument wird die Montag e der Modelle AXIS 231D/232D und PS-24 beschrieben. Weitere Hinweise finde n Sie in der Installationsanleitung zu AXIS 231D/232D. Verbinden Sie die Kuppelkamera mit der Stromversorgung und den Signaleingängen/-aus ...

  • Axis PS-24 - page 14

    PS-24-Versorgungsnetzteil Versorgungs- und Signalleitungen für AXIS 225FD anschließen In diesem Dokument wird die Montage der Modelle AXIS 225FD und PS-24 beschrieben. Weitere Hinweise finden Sie in der Installationsanleitung zur AXIS 225FD. Verbinden Sie die Kamera mit der Stromversorgung und den Signaleingängen/-ausgängen* (Kabel nicht mi tge ...

  • Axis PS-24 - page 15

    ...

  • Axis PS-24 - page 16

    AXIS COMMUNICATIONS <Product Name> Quic k User’s Guide PS-24 Power Supply Installation Guide Rev. 2.10 Part No. 26537 ...

Manufacturer Axis Category Network Card

Documents that we receive from a manufacturer of a Axis PS-24 can be divided into several groups. They are, among others:
- Axis technical drawings
- PS-24 manuals
- Axis product data sheets
- information booklets
- or energy labels Axis PS-24
All of them are important, but the most important information from the point of view of use of the device are in the user manual Axis PS-24.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Axis PS-24, service manual, brief instructions and user manuals Axis PS-24. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Axis PS-24.

Similar manuals

A complete manual for the device Axis PS-24, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Axis PS-24 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Axis PS-24.

A complete Axis manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Axis PS-24 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Axis PS-24, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Axis PS-24, that we can find in the current document
3. Tips how to use the basic functions of the device Axis PS-24 - which should help us in our first steps of using Axis PS-24
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Axis PS-24
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Axis PS-24 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Axis PS-24?

Use the form below

If you did not solve your problem by using a manual Axis PS-24, ask a question using the form below. If a user had a similar problem with Axis PS-24 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)