English dropdown-ico

Manual Radio Shack PRO-2046

14 pages 0.06 mb
Download

Go to site of 14

Summary
  • Radio Shack PRO-2046 - page 1

    PRO-2046 Programmable 100-Channel Mobile Scanner (200-0149) Introduction Your new RadioShack PRO-2046 Programmable 100-Channel Mobile Scanner lets you in on all the action! This scanner gives you direct access to over 30,000 exciting frequencies, including those used by police and fire departments, ambulance and transportation services, aircraft co ...

  • Radio Shack PRO-2046 - page 2

    important calls. Nine Frequency Bands - lets you quickly and easily search preset frequency ranges, so you can find new and unlisted broadcasts. Two Frequency Band Search - you can search upward or downward through the Options preset frequency bands (band Search) or Search by starting from a specified frequency (direct search). Frequency Skip - let ...

  • Radio Shack PRO-2046 - page 3

    channels. 162.400 MHz 162.475 MHz 162.550 MHz 162.425 MHz 162.500 MHz 162.450 MHz 162.525 MHz We recommend you record your scanner's serial number here. The number is on the scanner's back panel. Serial Number: _________________________________ FCC Notice Your scanner might cause TV or radio interference even when it is operating properly ...

  • Radio Shack PRO-2046 - page 4

    Special Features Faxback Doc. # 46802 Delay Many agencies use a two-way radio system that might have a pause of several seconds between a query and a reply. Your scanner's delay feature causes it to wait for 2 seconds after each transmission on a channel before it resumes scanning or searching. To program a 2 second delay for a channel you sel ...

  • Radio Shack PRO-2046 - page 5

    stored channels). As the scanner scans each bank, it checks that bank's priority channel every 2 seconds for activity. Notes: You cannot use the priority and data detection features at the same time (see "Detecting Data Signals" below). You can skip priority channels. If you skip all priority channels, the display shows P CH LOC OUt ...

  • Radio Shack PRO-2046 - page 6

    To detect data signals, press and hold down DATA until DATA appears on the display. If the scanner pauses on a transmission and detects a data signal, it resumes searching in 2 or 3 seconds. To stop detecting data signals, press DATA until DATA disappears from the display. Note: You cannot use DATA and PRIORITY at the same time. (See above.) Listen ...

  • Radio Shack PRO-2046 - page 7

    Operation Faxback Doc. # 46801 Turning On The Scanner/Setting Volume and Squelch 1. Turn SQUELCH and VOLUME fully counterclockwise. 2. Turn VOLUME clockwise until you hear a hissing sound. 3. Turn SQUELCH clockwise, then leave it set to a point just after the hissing sound stops. Notes: If the scanner picks up unwanted, partial, or very weak transm ...

  • Radio Shack PRO-2046 - page 8

    HWY PUBLIC SVC This indicator for each service search bank you selected appears on the display, and the scanner searches through all non-skipped channels (see "Skipping Frequencies/Channels" in Faxback Doc. # 46802) in the bank(s) you selected. The active banks indicator blinks on the display. The scanner searches the frequencies within t ...

  • Radio Shack PRO-2046 - page 9

    2. Using the number keys, enter the channel number where you want to store a frequency. 3. Press PROGRAM BANK and the bank number, the selected channel number, any previously stored frequency and PGM appear on the display. Note: If no frequency has been stored in the selected channel, 000.0000 MHz and L/O appear on the display. 4. Using the number ...

  • Radio Shack PRO-2046 - page 10

    To save the frequency into the current monitor memory, press MON. To continue searching, press / or /. To stop searching and listen to the frequency, press 91-100/0. -H- (hold) appears on the display. To continue automatic searching after you stop a search, either press 91-100/0 or press and hold down / or / for about 1 second. Notes: You can c ...

  • Radio Shack PRO-2046 - page 11

    HWY PUBLIC SVC The indicator for each search bank you selected appears on the display and the scanner searches through all non-skipped channels (see "Skipping Frequencies/Channels" in Faxback Doc. #46802) in the bank(s) you selected. When the scanner finds a transmission, it stops on that frequency. 2. When the scanner finds an active fre ...

  • Radio Shack PRO-2046 - page 12

    channel. To delete a frequency from a monitor memory, store a new frequency in the monitor memory. Manually Selecting a Channel You can continuously monitor a specific channel without scanning. This is useful if you hear an emergency broadcast on a channel and want to hear all the details (even though there might be periods of silence) or if you wa ...

  • Radio Shack PRO-2046 - page 13

    29-54 MHz: ................................................. 0.5 microV 108-136.975 MHz: ........................................... 2.0 microV 137-174 MHz: ............................................... 0.7 microV 406-512 MHz: ............................................... 0.7 microV 806-956 MHz: ............................................... 0 ...

  • Radio Shack PRO-2046 - page 14

    Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. ...

Manufacturer Radio Shack Category Marine Radio

Documents that we receive from a manufacturer of a Radio Shack PRO-2046 can be divided into several groups. They are, among others:
- Radio Shack technical drawings
- PRO-2046 manuals
- Radio Shack product data sheets
- information booklets
- or energy labels Radio Shack PRO-2046
All of them are important, but the most important information from the point of view of use of the device are in the user manual Radio Shack PRO-2046.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Radio Shack PRO-2046, service manual, brief instructions and user manuals Radio Shack PRO-2046. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Radio Shack PRO-2046.

Similar manuals

A complete manual for the device Radio Shack PRO-2046, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Radio Shack PRO-2046 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Radio Shack PRO-2046.

A complete Radio Shack manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Radio Shack PRO-2046 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Radio Shack PRO-2046, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Radio Shack PRO-2046, that we can find in the current document
3. Tips how to use the basic functions of the device Radio Shack PRO-2046 - which should help us in our first steps of using Radio Shack PRO-2046
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Radio Shack PRO-2046
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Radio Shack PRO-2046 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Radio Shack PRO-2046?

Use the form below

If you did not solve your problem by using a manual Radio Shack PRO-2046, ask a question using the form below. If a user had a similar problem with Radio Shack PRO-2046 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)