English dropdown-ico

Manual Fostex MR-8HD

146 pages 3.77 mb
Download

Go to site of 146

Summary
  • Fostex MR-8HD - page 1

    Owner’ s Man ual Digital Multitracker 8588062100 (428387) ...

  • Fostex MR-8HD - page 2

    2 MR-8HD Owner ’s Manual (Safety instructions/Contents) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 11. Grounding or Polarization - The precautions that should be taken so that the ground ...

  • Fostex MR-8HD - page 3

    3 MR-8HD Owner ’s Manual (Safety instructions/Contents) Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ...

  • Fostex MR-8HD - page 4

    4 MR-8HD Owner ’s Manual (Safety instructions/Contents) Read this chapter fir st! ...................................................................................................... .......9 Intr oduction .................................................................................................................. ........10 MR-8HD main fe ...

  • Fostex MR-8HD - page 5

    5 MR-8HD Owner ’s Manual (Safety instructions/Contents) Input connection ..................................................................................................................33 Input channel ..............................................................................................................33 INPUT A SEL switch ............ ...

  • Fostex MR-8HD - page 6

    6 MR-8HD Owner ’s Manual (Safety instructions/Contents) T rack bouncing ................................................................................................................ .......63 Preliminary knowledge .......................................................................................................64 Track bouncing example .. ...

  • Fostex MR-8HD - page 7

    7 MR-8HD Owner ’s Manual (Safety instructions/Contents) MIDI synchr onization .......................................................................................................... ...85 Synchr onization using MTC ...............................................................................................86 Connection ..................... ...

  • Fostex MR-8HD - page 8

    8 MR-8HD Owner ’s Manual (Safety instructions/Contents) T rouble f or recor ding ......................................................................................................... 132 T roub le for pla yback ..........................................................................................................133 T roub le for effect .. ...

  • Fostex MR-8HD - page 9

    9 MR-8HD Owner ’s Manual (Read this chapter first!) Read this c hapter fir st! This chapter describes precautions before using, as well as features and basic knowledge of the MR-8HD. To understand the MR-8HD features and basic functions, read this chap- ter before using. ...

  • Fostex MR-8HD - page 10

    10 MR-8HD Owner ’s Manual (Read this chapter first!) Thank you very much for purchasing the Fostex MR-8HD digital multitracker. The MR-8HD is a digital multitracker which can record 8-track audio at 44.1 kHz/16 bits on the internal 3.5-inch hard disk. Up to four tracks can be recorded simultaneously. The MR-8HD is also equipped with an 8-channel ...

  • Fostex MR-8HD - page 11

    11 MR-8HD Owner ’s Manual (Read this chapter first!) About power suppl y • Be sure to connect the MR-8HD to the power supply specified in the specifications section of this owner's manual. Do not use an AC outlet of any other voltage. • Do not connect the MR-8HD to the same AC outlet to which devices that could generate noise (such as a ...

  • Fostex MR-8HD - page 12

    12 MR-8HD Owner ’s Manual (Read this chapter first!) This section describes the basics of the MR-8HD you should know before using the MR- 8HD. Recor ding method The MR-8HD is fitted with a 3.5-inch hard disk drive. Songs are recorded on a hard disk along with the ABS time (from 00m00s000ms to 99m59s999ms). The ABS time shows the absolute time on ...

  • Fostex MR-8HD - page 13

    13 MR-8HD Owner ’s Manual (Read this chapter first!) About song To understand songs, imagine separated rooms as shown below. Each room can be regarded as a song. With the MR-8HD, you can create up to 99 rooms (songs) on the hard disk (although the available space may limit the number of songs). Recorded track data is stored in a song as mono W A ...

  • Fostex MR-8HD - page 14

    14 MR-8HD Owner ’s Manual (Read this chapter first!) Time base Input monitor and repr o monitor The term, "time base", is used as the reference of recorder position information. Using the [TIME BASE SELECT] key, you can select from among two time base modes: ABS time and bar/beat mode. Each screen example below shows the recorder is loc ...

  • Fostex MR-8HD - page 15

    15 MR-8HD Owner ’s Manual (Read this chapter first!) [TRIM] control You must pay great attention to the [TRIM] control adjustment when recording to the MR-8HD. The analog signal received at each input ([INPUT A] through [INPUT D]) is sent to the TRIM control, by which the signal level fed to the A/D converter of the MR-8HD is controlled. You can ...

  • Fostex MR-8HD - page 16

    16 MR-8HD Owner ’s Manual (Read this chapter first!) ...

  • Fostex MR-8HD - page 17

    17 MR-8HD Owner ’s Manual (Names and functions) Names and functions This chapter describes the names and functions of the controls, keys, connectors, etc. on the MR-8HD top panel and rear panel, as well as details of the display. See this chapter whenever you want to know the function of a control, key, etc. ...

  • Fostex MR-8HD - page 18

    18 MR-8HD Owner ’s Manual (Names and functions) 1 . [INPUT A] input connectors (XLR connector and phone jack) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A-B PLAY LOCATE ABS ZERO PLAY STOP RECORD REWIND F FWD GUIDE RHYTHM CONTRAST 1-8 > SO ...

  • Fostex MR-8HD - page 19

    19 MR-8HD Owner ’s Manual (Names and functions) <Note>: This switch cannot turn off the power completely. When this switch is "up", the MR-8HD enters standby mode (i.e. the power does not completely turned off). Therefore, if you do not use the MR-8HD for a long time, we recommend unplugging the power cord from the AC outlet. 5 . ...

  • Fostex MR-8HD - page 20

    20 MR-8HD Owner ’s Manual (Names and functions) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A-B PLAY LOCATE ABS ZERO PLAY STOP RECORD REWIND F FWD GUIDE RHYTHM CONTRAST 1-8 > SONG NEW 1-6 > 7/8 1-4 > 5/6 STEREO WA V FILE BOUNCE POWER ...

  • Fostex MR-8HD - page 21

    21 MR-8HD Owner ’s Manual (Names and functions) 30 . [MASTERING (PO WERFUL/NA TURAL/ BRIGHT] keys Used to select the desired mastering effect during track bounce or mixdown. You can select from three effect types by pressing an appropriate key (see page 62). In the menu mode, the [POWERFUL] key is used for character entry of J, K, L, j, k, l and ...

  • Fostex MR-8HD - page 22

    22 MR-8HD Owner ’s Manual (Names and functions) Either of the [BAL] XLR and [UNBAL/GUIT AR] phone connec- tors can be used. Set the switch to this position when the source is an external microphone or line level source. MIC/LINE GTR DIST GTR CLEAN 4 . [DIGIT AL OUT] connector (T oslink optical connector) 5 . [MIDI OUT] jac k (DIN 5-pin connector) ...

  • Fostex MR-8HD - page 23

    23 MR-8HD Owner ’s Manual (Names and functions) When turning on the MR-8HD, the display shows the startup screen (showing the startup status of the MR- 8HD), followed by the "home" screen, which is similar to the one below. In this condition, the previously loaded song is loaded and the recorder is located at the beginning of the song. ...

  • Fostex MR-8HD - page 24

    24 MR-8HD Owner ’s Manual (Names and functions) When the display shows the home screen, pressing the [TIME BASE SELECT] key switches the time base mode between ABS and bar/beat. Example of ABS display Example of bar/beat display You can adjust the display contrast by rotating the [MENU/ENTER] knob while holding down the [CON- TRAST] key. Rotating ...

  • Fostex MR-8HD - page 25

    25 MR-8HD Owner ’s Manual (Names and functions) If a serious problem happens to the MR-8HD during operation, an appropriate warning message is shown on the display. Most warning messages are being shown until the [MENU/ENTER] knob is pressed. Note that there are also not-so-serious warning messages besides the following. Pressing the [MENU/ENTER] ...

  • Fostex MR-8HD - page 26

    26 MR-8HD Owner ’s Manual (Names and functions) ...

  • Fostex MR-8HD - page 27

    27 MR-8HD Owner ’s Manual (Basic operations) Basic operations This chapter describes power connection, power on/off, demo song playback, etc., as well as basic multitrack recording. If it is the first time for you to use a Multitracker, read this chapter carefully first so that you are familiar with the MR-8HD basic opera- tions, then read other ...

  • Fostex MR-8HD - page 28

    28 MR-8HD Owner ’s Manual (Basic operations) The MR-8HD operates by AC power. Before you start using the MR-8HD, you must connect the supplied power cord. INPUT A SEL USB USB HOST AC-IN DIGITAL OUT FOOT SW MIDI OUT GTR CLEAN MIC/LINE GTR DIST Connect between the [AC IN] connector on the MR-8HD rear panel and an AC outlet using the sup- plied powe ...

  • Fostex MR-8HD - page 29

    29 MR-8HD Owner ’s Manual (Basic operations) Connect headphones to either of the two [PHONES] jacks of the MR-8HD. Both jacks feed the same signal so you may connect headphones whichever you like. If you have a powered monitor speaker, you may connect it to the [STEREO OUT] jacks of the MR-8HD. Connecting headphones (or a monitor speaker system) ...

  • Fostex MR-8HD - page 30

    30 MR-8HD Owner ’s Manual (Basic operations) In the demo song, approximately 1-minute audio is recorded on all eight tracks. Follow the procedure below for listening to the demo song. In the following procedure, it is assumed that the MR-8HD is turned on and a pair of headphones (or a monitor speaker system) is connected. Pla ying bac k the demo ...

  • Fostex MR-8HD - page 31

    31 MR-8HD Owner ’s Manual (Basic operations) This section describes how to create a new song for recording on the hard disk, while keeping the demo song. In the following procedure, it is assumed that the MR-8HD is stopped at the begin- ning (ABS ZERO) of the demo song. 1) While the recor der is stopped, press the [MENU/ENTER] knob to enter the m ...

  • Fostex MR-8HD - page 32

    32 MR-8HD Owner ’s Manual (Basic operations) 6) After completing song name entry , press the [MENU/ENTER] knob. The cursor moves to “[ENTER]” at the bottom of the screen. 7) While “[ENTER]” is flashing, press the [MENU/ENTER] knob. The display now shows the home screen of the newly created song (My_Song). As shown in the lower screen exam ...

  • Fostex MR-8HD - page 33

    33 MR-8HD Owner ’s Manual (Basic operations) The MR-8HD provides four input channels: [INPUT A], [INPUT B], [INPUT C] and [INPUT D]. Each channel provides both the XLR and 1/4" phone connectors. INPUT A INPUT B INPUT C INPUT D INPUT A INPUT B INPUT C INPUT D • When you use the [INPUT A] channel, set the [INPUT A SEL] switch on the rear pan ...

  • Fostex MR-8HD - page 34

    34 MR-8HD Owner ’s Manual (Basic operations) The following shows the recording track combinations and available input channel(s) by the number of tracks simultaneously recorded. Recor ding track combinations and a v ailab le input channel(s) Recording to a single trac k Only [INPUT A] is av ailable. Y ou can record only the [INPUT A] channel sign ...

  • Fostex MR-8HD - page 35

    35 MR-8HD Owner ’s Manual (Basic operations) You can record onto any one of tracks 1 through 4. When making recording to a single track, you can record a signal fed to the [INPUT A] channel. The following describes the procedure for recording an acoustic guitar onto track 1 via a micro- phone. We assume that Song02 is loaded and no sound is recor ...

  • Fostex MR-8HD - page 36

    36 MR-8HD Owner ’s Manual (Basic operations) 6) While playing the guitar , adjust the recording le vel using the [TRIM] control of the [INPUT A] channel. Adjust the level appropriately so that the PEAK indicator does not light. Turning the [PHONES VOL] control clockwise raises the headphone monitor level. The screen shows the input level of track ...

  • Fostex MR-8HD - page 37

    37 MR-8HD Owner ’s Manual (Basic operations) Overdubbing is recording something new while listening to the previously recorded track(s). It is a very important method in multitrack recording. The following describes an example of over- dubbing for recording a stereo keyboard to tracks 7/8 while listening to the guitar on track 1. See the procedur ...

  • Fostex MR-8HD - page 38

    38 MR-8HD Owner ’s Manual (Basic operations) 9) While holding down the [RECORD] ke y , press the [PLA Y] key to start recording. The recorder records the keyboard while playing back track 1 (guitar). 10) When recording completes, press the [STOP] ke y to stop the recorder . <Note>: We recommend to press the [REC SELECT] key for tracks 7/8 t ...

  • Fostex MR-8HD - page 39

    39 MR-8HD Owner ’s Manual (Basic operations) You can simultaneously record up to four tracks. See page 34 for the available combinations of four recording tracks. The following describes the procedure for recording different sound sources simultaneously to tracks 1 through 4. You can make four-track simultaneous recording with any available track ...

  • Fostex MR-8HD - page 40

    40 MR-8HD Owner ’s Manual (Basic operations) 6) While pla ying the music, adjust the recor ding level of each trac k using the [TRIM] contr ol of each input channel. Adjust the level appropriately so that the PEAK indicator does not light. Turning the [PHONES VOL] control clockwise raises the headphone monitor level. The screen shows the input le ...

  • Fostex MR-8HD - page 41

    41 MR-8HD Owner ’s Manual (Basic operations) <Tip>: By sliding up or down the MR-8HD [MASTER] fader gradually, you can fade in or fade out recording. 3) Adjust the recor ding level of the master recor der while rehearsing mixdo wn. See the manual of the master recorder for details about how to adjust the recording level. 4) After rehear sin ...

  • Fostex MR-8HD - page 42

    42 MR-8HD Owner ’s Manual (Basic operations) 1) Connect the [DIGIT AL OUT] connector of the MR-8HD to the digital input connector of a digital master recorder using an optical cab le. <Note>: The [DIGITAL OUT] connector of the MR-8HD is the Toslink optical type. If your digital recorder provides only the coaxial type connector, use the Fost ...

  • Fostex MR-8HD - page 43

    43 MR-8HD Owner ’s Manual (Advanced playback and locate functions) Ad v anced pla ybac k and locate functions This chapter describes advanced playback functions including cue- ing, partial playback (between points A and B), special play modes, as well as the locate function. ...

  • Fostex MR-8HD - page 44

    44 MR-8HD Owner ’s Manual (Advanced playback and locate functions) • By holding down the [F FWD] ke y during pla y bac k, the recorder starts cueing f orwar ds at 3 x speed. During forward cueing, ">>" is shown on the display. • By holding down the [REWIND] ke y during pla y bac k, the recorder starts cueing bac kwar ds at 3 x ...

  • Fostex MR-8HD - page 45

    45 MR-8HD Owner ’s Manual (Advanced playback and locate functions) While the recorder is stopped, each time you press the [PLAY MODE] key, the play mode switches among "Off", "Auto Play", "Auto return" and "Loop". The current mode is shown on the screen as follows (when "Off" is selected, there is ...

  • Fostex MR-8HD - page 46

    46 MR-8HD Owner ’s Manual (Advanced playback and locate functions) In the Auto play mode, when locating to the ABS ZERO, REC END, LOCATE A or LOCATE B point, the recorder automatically starts playback from the point. The following shows the auto play function after locating to the LOCATE A point (see page 48 for the locate function). The auto ret ...

  • Fostex MR-8HD - page 47

    47 MR-8HD Owner ’s Manual (Advanced playback and locate functions) When the loop mode is active (while the auto punch in/out mode is inactive), the LOCATE A and LOCATE B points are used as the loop start and end points. When the auto punch in/ out mode is active (while the loop mode is inactive), the LOCATE A and LOCATE B points are used as the p ...

  • Fostex MR-8HD - page 48

    48 MR-8HD Owner ’s Manual (Advanced playback and locate functions) The following describes the locate functions, which allow you to immediately skip to a specified point in a song. Time locate Regardless of the current recorder position, you can locate to the beginning (ABS ZERO) of the song or the recording end (REC END) of the song. • While t ...

  • Fostex MR-8HD - page 49

    49 MR-8HD Owner ’s Manual (Advanced playback and locate functions) Locating to the LOCA TE A or LOCA TE B point You can set the desired point of a song as the LOCATE A or LOCATE B point. The LOCATE A and B points can be used not only for locating, but also for auto punch in/out, play modes and part editing, etc. Setting the LOCA TE A or LOCA TE B ...

  • Fostex MR-8HD - page 50

    50 MR-8HD Owner ’s Manual (Advanced playback and locate functions) Locating While the recor der is stopped, press the [LOCA TE A/IN] (or [LOCA TE B/OUT]) key . The recorder instantly locates to the appropriate point. <Tip>: By selecting the play mode to "Auto play", the recorder automatically starts playback after locating the LOC ...

  • Fostex MR-8HD - page 51

    51 MR-8HD Owner ’s Manual (Punch in/out) Punc h in/out Using the punch in/out function of the MR-8HD, you can overwrite the desired part of the recorded track. "Punch in" means switching from playback to recording, while "punch out" means switching from recording to playback. The MR-8HD offers three methods for making punch in ...

  • Fostex MR-8HD - page 52

    MR-8HD Owner ’s Manual (Punch in/out) 52 1) Press the [REC SELECT] ke y f or the track y ou are going to make punch in/out recor ding. The track is record-armed. 2) Locate the recorder to the point bef ore the punch- in point and press the [PLA Y] key to start playbac k. It may be a good idea to play the instrument along with the playback sound, ...

  • Fostex MR-8HD - page 53

    53 MR-8HD Owner ’s Manual (Punch in/out) 1) Connect the f oots witc h to the [FOO T SW] jac k on the MR-8HD rear panel. 2) Press the [REC SELECT] key f or the trac k y ou are going to make punch in/out recor ding. The track is record-armed. 3) Locate the recorder to the point bef ore the punch- in point, and press the [PLA Y] key to start play ba ...

  • Fostex MR-8HD - page 54

    MR-8HD Owner ’s Manual (Punch in/out) 54 By setting the punch-in and punch-out points in advance, The recorder automatically makes punch in/out recording for you. You can rehearse punch in/out recording as many times you like. Setting the punch-in and punc h-out points 3) When the recor der reac hes at the point where you want to make punc hing o ...

  • Fostex MR-8HD - page 55

    55 MR-8HD Owner ’s Manual (Punch in/out) After setting the punch-in and punch-out points appropriately, you can rehearse the auto punch in/out for checking the punch-in and -out points or practicing punch-in and -out timing. <Tip>: You can immediately locate to the punch-in point by pressing the [LOCATE A/IN] key. Therefore, by pressing the ...

  • Fostex MR-8HD - page 56

    MR-8HD Owner ’s Manual (Punch in/out) 56 After rehearsing the auto punch-in/out operation, it's time for executing actual auto punch in/ out operation. 1) Locate the recorder to the point bef ore the punch- in point. 2) Make sure that "A UT O PUNCH" is shown on the screen (i.e. the auto punch mode is active). If it is not shown, pr ...

  • Fostex MR-8HD - page 57

    57 MR-8HD Owner ’s Manual (Using ef fects) Using eff ects The MR-8HD provides the insert effects for recording (microphone and amplifier simulation effects), the delay/reverb effects for track bounce or mixdown (for tracks 1 through 4 only), and the master- ing effects for L/R mix. You can also use an external effect device connected to the [INSE ...

  • Fostex MR-8HD - page 58

    58 MR-8HD Owner ’s Manual (Using ef fects) The [INPUT A] channel of the MR-8HD provides two types of insert effects: microphone and amplifier simulation effects. These effects can be used during recording. These effects simulate popular microphones and guitar amplifiers. If you use the microphone simulation effect when you record an acoustic guit ...

  • Fostex MR-8HD - page 59

    59 MR-8HD Owner ’s Manual (Using ef fects) During recording, you can apply external effects to a sound source connected to an input con- nector in the [INPUT A] channel. The [INPUT A] channel has the [INSERT] connector (phone jack). You can connects an external effect unit (typically, a compressor/limiter) to this connector using a Y-cable, as sh ...

  • Fostex MR-8HD - page 60

    60 MR-8HD Owner ’s Manual (Using ef fects) Selecting an effect type The MR-8HD has the original built-in reverb/delay processor featuring the newly-developed algorithm. You can apply the reverb or delay to playback signals of tracks 1 through 4 during mixdown and track bouncing. Details of each effect type R OOM HALL PLA TE DELA Y Simulates rever ...

  • Fostex MR-8HD - page 61

    61 MR-8HD Owner ’s Manual (Using ef fects) As shown in the signal flowchart below, a track (playback) signal after the track fader is fed to the [EFFECT SEND] control and adjusted, then fed to the effect processor input. The effect processor's stereo output signals (wet signals) and stereo (L/R) signals (dry sig- nals) are merged together an ...

  • Fostex MR-8HD - page 62

    62 MR-8HD Owner ’s Manual (Using ef fects) The MR-8HD provides the dedicated mastering effects for the L/R stereo buss. You can use the mastering effects when bouncing more than one track to stereo tracks or when mixing down tracks 1 through 8 to stereo and sent to an external master recorder for recording. PO WERFUL NA TURAL BRIGHT <Bouncing ...

  • Fostex MR-8HD - page 63

    63 MR-8HD Owner ’s Manual (T rack bouncing) T rac k bouncing This chapter describes track bouncing which is an important function in the recording process. The track bouncing mixes several tracks and records onto other two tracks. By using this function, you can record more sound materials to the MR-8HD tracks. Three track bouncing modes are avai ...

  • Fostex MR-8HD - page 64

    64 MR-8HD Owner ’s Manual (T rack bouncing) You can record more than eight materials using the track bouncing function as shown in the following example. <Step 1> Make recording to tracks 1 through 6. <Step 2> Bounce tracks 1 through 6 to tracks 7/8. <Step 3> Delete tracks 1 through 6. <Step 4> Overdub new materials to tra ...

  • Fostex MR-8HD - page 65

    65 MR-8HD Owner ’s Manual (T rack bouncing) • "1-6 > 7/8" mode (see page 68) In the "1-6 > 7/8" mode, tracks 1 through 6 are played back, mixed down to stereo, and bounced to tracks 7/8. In this mode, you can apply a reverb (or delay) to tracks 1 through 4, as well as the mastering effect to the mixed signals. You can ...

  • Fostex MR-8HD - page 66

    66 MR-8HD Owner ’s Manual (T rack bouncing) Before executing track bouncing, you can rehearse it. While rehearsing track bouncing, you can control the playback level, panning and reverb (or delay) send setting of each source track, as well as apply the mastering effect to the mixed L/R signals. We recommend to make rehearsal thoroughly until you ...

  • Fostex MR-8HD - page 67

    67 MR-8HD Owner ’s Manual (T rack bouncing) 5) After finishing rehearsal, press the [STOP] ke y to stop the recor der and locate it to the beginning of the song. Do not move the controls and faders after finishing rehearsal. 1) Before carrying out actual trac k bouncing, make sure that the bounce mode is selected to "1-4>5/6". 2) Pre ...

  • Fostex MR-8HD - page 68

    68 MR-8HD Owner ’s Manual (T rack bouncing) You can bounce tracks 1 through 6 to tracks 7/8. As described earlier in "Bouncing tracks 1 through 4 to tracks 5/6", you can rehearse track bouncing as many times as you like before executing actual track bouncing. Before executing track bouncing, you can rehearse it. While rehearsing track b ...

  • Fostex MR-8HD - page 69

    69 MR-8HD Owner ’s Manual (T rack bouncing) 5) After finishing rehearsal, press the [STOP] ke y to stop the recor der and locate it to the beginning of the song. Do not move the controls and faders after finishing rehearsal. 1) Before carrying out actual track bouncing, make sure that the bounce mode is selected to "1-6>7/8". 2) Pres ...

  • Fostex MR-8HD - page 70

    70 MR-8HD Owner ’s Manual (T rack bouncing) You can bounce tracks 1 through 8 to tracks 7/8 of a new song. A new song is automatically created when executing track bouncing ( <Note>: In the “1-8 > NEW SONG” mode, y ou cannot bounce the desired part of a song by using the trac k bouncing and auto punc h in/out functions together ). Be ...

  • Fostex MR-8HD - page 71

    71 MR-8HD Owner ’s Manual (T rack bouncing) After finishing rehearsal, let's carry out actual track bouncing. 1) While the recor der is stopped, press the [1-8 > NEW SONG] key . The [1-8 > NEW SONG] key lights up and the display shows the screen below. If you execute track bouncing, press the [MENU/ENTER] knob while holding down the [R ...

  • Fostex MR-8HD - page 72

    72 MR-8HD Owner ’s Manual (T rack bouncing) The MR-8HD can mix input signals of [INPUT A] through [INPUT D]. The following diagram shows an example of mixing signals of INPUT A through INPUT D when bouncing tracks 1 through 6 to tracks 7/8. As you can see, the signals of INPUT A through INPUT D are mixed to the L/R stereo buss together with the b ...

  • Fostex MR-8HD - page 73

    73 MR-8HD Owner ’s Manual (T rack bouncing) The default panning settings are as below. You can set each input to the desired panning position from L10 (hard left) to R10 (hard right). Input A CNT (center position) Input B CNT (center position) Input C CNT (center position) Input D CNT (center position) 3) Rotate the [MENU/ENTER] knob to select th ...

  • Fostex MR-8HD - page 74

    74 MR-8HD Owner ’s Manual (T rack bouncing) Typically, bouncing is executed from the beginning to the end of a song, as shown in Figure 1 below. However, you can bounce only the desired part by using the track bouncing and punch in/out functions together. The following assumes that the song you are going to execute track bouncing is loaded and yo ...

  • Fostex MR-8HD - page 75

    75 MR-8HD Owner ’s Manual (Rhythm guide function) Rh ythm guide function The MR-8HD offers the rhythm guide function, which allows out- putting the rhythm guide click during recording. This chapter describes how to output the rhythm guide, set the time signature/tempo and create the conductor map. ...

  • Fostex MR-8HD - page 76

    76 MR-8HD Owner ’s Manual (Rhythm guide function) The MR-8HD provides the metronome function which can output the rhythm guide click during recording. You can easily output the guide click from the [STEREO OUT] jacks by pressing the [RHYTHM GUIDE] key on the top panel. Two types of the rhythm guide are available: one has the constant time signatu ...

  • Fostex MR-8HD - page 77

    77 MR-8HD Owner ’s Manual (Rhythm guide function) Rhythm Guide: Off Conductor Map: Off Rhythm guide No output Bar/beat indication The "Signature" and "T empo" item settings are effective. Rhythm Guide: Off Conductor Map: On No output The conductor map is effective. Rhythm Guide: On Conductor Map: Off Output: The tempo and time ...

  • Fostex MR-8HD - page 78

    78 MR-8HD Owner ’s Manual (Rhythm guide function) 2) Rotate the [MENU/ENTER] knob to select "Song", and press the [MENU/ENTER] knob. The display now shows the song editing screen, where "<< Back" is highlighted. 3) Rotate the [MENU/ENTER] knob to select "Signature Map" on the second page, and press the [MENU/EN ...

  • Fostex MR-8HD - page 79

    79 MR-8HD Owner ’s Manual (Rhythm guide function) 4) Rotate the [MENU/ENTER] knob to select "---Bar -> ---", and press the [MENU/ENTER] knob. The display now shows the screen for setting the new time signature event, where "<< Back" is highlighted. Bar 1 through bar 3: 4/4 Bar 4 through bar 7: 3/4 Bar 8 through bar 11 ...

  • Fostex MR-8HD - page 80

    80 MR-8HD Owner ’s Manual (Rhythm guide function) • Deleting an unnecessary time signature event You can delete an unnecessary time signature event. 2) Rotate the [MENU/ENTER] knob to select "[DELETE]" at the bottom, and press the [MENU/ENTER] knob. The event is immediately deleted and the display returns to the signature map screen. ...

  • Fostex MR-8HD - page 81

    81 MR-8HD Owner ’s Manual (Rhythm guide function) By default, the bar/beat value at the beginning (ABS ZERO) of the song is set to "bar -2/beat 1". This offset (the bar/beat value at ABS ZERO) is called "bar offset". You can change the default bar offset to the desired value. 2) Rotate the [MENU/ENTER] knob to select the desir ...

  • Fostex MR-8HD - page 82

    82 MR-8HD Owner ’s Manual (Rhythm guide function) Bar 1/beat 1: 120 bpm Bar 4/beat 2: 180 bpm Bar 8/beat 3: 90 bpm Bar 12/beat 1: 120 bpm Bar 16/beat 4: 250 bpm After setting the time signature map, you have to create the tempo map by adding the necessary tempo event(s). Like a time signature event, a tempo event specifies the tempo at the tempo ...

  • Fostex MR-8HD - page 83

    83 MR-8HD Owner ’s Manual (Rhythm guide function) 7) Rotate the [MENU/ENTER] knob to select "Beat = 1 ", and press the [MENU/ENTER] knob. "1 " starts flashing and you can now set the beat number. You can enter the beat number between 1 and 8. 8) Rotate the [MENU/ENTER] knob to enter the desired beat number , and press the [MEN ...

  • Fostex MR-8HD - page 84

    84 MR-8HD Owner ’s Manual (Rhythm guide function) • Deleting an unnecessary tempo event You can delete an unnecessary tempo event. 2) Rotate the [MENU/ENTER] knob to select "[DELETE]" at the bottom, and press the [MENU/ENTER] knob. The event is immediately deleted and the display returns to the tempo map screen. • Editing a tempo ev ...

  • Fostex MR-8HD - page 85

    85 MR-8HD Owner ’s Manual (MIDI synchronization) MIDI sync hr onization By connecting the external MIDI devices (such as a sequencer, sound module, computer, etc.) via the [MIDI OUT] connector of the MR- 8HD, you can make powerful recording. For example, by synchronizing a sequencer with the MR-8HD dur- ing playback, you can mix down signals (suc ...

  • Fostex MR-8HD - page 86

    86 MR-8HD Owner ’s Manual (MIDI synchronization) The following describes how to synchronize a sequencer to the MR-8HD which supports MTC (MIDI Time code). Connect the [MIDI OUT] connector of the MR-8HD to the [MIDI IN] connector of an external MIDI sequencer using a MIDI cable. (Note that no MIDI cable is supplied with the MR-8HD. Use a commercia ...

  • Fostex MR-8HD - page 87

    87 MR-8HD Owner ’s Manual (MIDI synchronization) The following describes how to synchronize a sequencer to the MR-8HD using MIDI clock. Use this method if the sequencer does not support MTC (MIDI Time code) <Notes> • To synchronize a sequencer to the MR-8HD using MIDI clock, you have to make the signature/tempo map in the MR-8HD. The MIDI ...

  • Fostex MR-8HD - page 88

    88 MR-8HD Owner ’s Manual (MIDI synchronization) ...

  • Fostex MR-8HD - page 89

    89 MR-8HD Owner ’s Manual (Data export to a personal computer) Data e xpor t to a per sonal computer This chapter describes how to export song data on tracks 7/8 to a personal computer. To export the desired song data to a personal computer, you must convert the song data to a stereo WAV file. You can export the converted (WAV) file to the person ...

  • Fostex MR-8HD - page 90

    90 MR-8HD Owner ’s Manual (Data export to a personal computer) By converting track data recorded on tracks 7/8 (which consists of an L/R pair of mono WAV files) to a stereo WAV file, you can export the data to a personal computer. The following describes how to convert data on tracks 7/8 (which may be bounced from other tracks or simply recorded ...

  • Fostex MR-8HD - page 91

    91 MR-8HD Owner ’s Manual (Data export to a personal computer) 5) Press the [MENU/ENTER] knob. The MR-8HD quits the conversion function and the display returns to the home screen. <Editing a file name> You can edit a file name by the following procedure. 2) Enter a ne w name using the c haracter entry keys. Pressing a different character en ...

  • Fostex MR-8HD - page 92

    92 MR-8HD Owner ’s Manual (Data export to a personal computer) The MR-8HD is equipped with the USB port for direct connection to a personal computer using a USB cable. The USB connection allows you to export the stereo WAV file data, which is converted from a pair of mono WAV files on tracks 7/8, to your computer. The exported data can be played ...

  • Fostex MR-8HD - page 93

    93 MR-8HD Owner ’s Manual (Data export to a personal computer) 3) Highlight "USB" b y r otating the [MENU/ENTER] knob, then press the [MENU/ENTER] knob. The display shows the USB menu screen. 1) T urn on the power of the personal computer and the MR-8HD . 2) Press the [MENU/ENTER] knob to enter the menu mode. The display now shows the f ...

  • Fostex MR-8HD - page 94

    94 MR-8HD Owner ’s Manual (Data export to a personal computer) The MR-8HD internal hard disk is protected by default. The protection is effective only in the USB mode in which the MR-8HD is used with a personal computer. You can make the hard disk “read only” (protected) or “read/write enabled” (unprotected). The default is “read only? ...

  • Fostex MR-8HD - page 95

    95 MR-8HD Owner ’s Manual (Data export to a personal computer) You can archive song data recorded by the MR-8HD by using either of the following methods. (1) Using the W A V Mana ger supplied b y Foste x The WAV Manager converts each track data to a single mono file. Data is compressed so you can save the file in small size to a personal computer ...

  • Fostex MR-8HD - page 96

    96 MR-8HD Owner ’s Manual (Data export to a personal computer) ...

  • Fostex MR-8HD - page 97

    97 MR-8HD Owner ’s Manual (Song management) Song mana g ement This chapter explains the following five operation procedures for song management. 1) Selecting the desired song. 2) Editing a song name. 3) Deleting an unnecessary song. 4) Protecting a song. <Notes> While a menu screen is shown, you can go up the menu screen level or directly e ...

  • Fostex MR-8HD - page 98

    98 MR-8HD Owner ’s Manual (Song management) The following describes how to select the desired song from the disk when more than one song is created on the disk. You can also create a new song by the similar procedure. See "Basic operations" (page 31) for details about how to create a new song. 1) While the recor der is stopped, press th ...

  • Fostex MR-8HD - page 99

    99 MR-8HD Owner ’s Manual (Song management) You can edit a current song name save the edited song name. Only the current song can be edited. 1) Load the desired song of which y ou are going to edit the song name. 2) While the recor der is stopped, press the [MENU/ENTER] knob to enter the menu mode. The display now shows the first page of the menu ...

  • Fostex MR-8HD - page 100

    100 MR-8HD Owner ’s Manual (Song management) <Notes> • You cannot delete a song which is protected. To delete such a song, release the protection of the song first (see the next page). • A deleted song file still remains as a “hidden file” on the hard disk. So deleting a song file does not increase the remaining (recordable) space o ...

  • Fostex MR-8HD - page 101

    101 MR-8HD Owner ’s Manual (Song management) You can protect a song to prevent an accidental erasure. The protection can be released when- ever you want. To keep a recorded song safely, we recommend protecting it. You can make protection setting only for the current song. 5) Rotate the [MENU/ENTER] knob to select "On", and press the [ME ...

  • Fostex MR-8HD - page 102

    102 MR-8HD Owner ’s Manual (Song management) <Note>: You cannot make recording or editing to a protected song. If you want to make recording or editing to a protected song, you must release the protection first. <Note>: When you set the protection to "On", all the recording-related keys, such as the [REC SELECT] and [BOUNCE] ...

  • Fostex MR-8HD - page 103

    103 MR-8HD Owner ’s Manual (T rack editing) T rac k editing This chapter describes how to edit whole data of a selected (mono or stereo) track. Track editing does not consume the hard disk space. Therefore, the remaining space of the disk does not change by ex- ecuting track editing. <Undo/redo of trac k editing> By pressing the [UNDO/REDO] ...

  • Fostex MR-8HD - page 104

    104 MR-8HD Owner ’s Manual (T rack editing) 5) Rotate the [MENU/ENTER] knob to select "Erase T rack = *", and press the [MENU/ENTER] knob. The currently selected option flashes and you can now select the desired option by rotating the [MENU/ENTER] knob. The available options are: • 1 through 8 (mono trac k) • 1/2, 3/4, 5/6 and 7/8 ( ...

  • Fostex MR-8HD - page 105

    105 MR-8HD Owner ’s Manual (T rack editing) 8) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “Erase Track >” is highlighted. 9) Press the [ST OP] ke y to e xit the men u mode. You can copy whole data (from ABS ZERO to REC END) of the desired track(s) of the song cur- rently loaded and paste it to ...

  • Fostex MR-8HD - page 106

    106 MR-8HD Owner ’s Manual (T rack editing) 9) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “Copy-Paste Trk >” is highlighted. 10) Press the [STOP] ke y to e xit the menu mode. <Note>: If a destination track has recorded data, pasting the copied data overwrites the previous data. <Note& ...

  • Fostex MR-8HD - page 107

    107 MR-8HD Owner ’s Manual (T rack editing) TRK 1 TRK 2 TRK 3 TRK 4 TRK 5 TRK 6 TRK 7 TRK 8 ABS ZERO REC END You can move whole data (from ABS ZERO to REC END) of the desired track(s) to the other desired track(s). After the data is moved, the original track(s) is(are) silent. You can only move track data within the current song. <Note>: Yo ...

  • Fostex MR-8HD - page 108

    108 MR-8HD Owner ’s Manual (T rack editing) You can exchange whole data (from ABS ZERO to REC END) between the desired track(s). <Note>: You cannot exchange track data of a song protected. Release the protection before exchang- ing track data. TRK 1 TRK 2 TRK 3 TRK 4 TRK 5 TRK 6 TRK 7 TRK 8 ABS ZERO REC END <Note>: If you want to canc ...

  • Fostex MR-8HD - page 109

    109 MR-8HD Owner ’s Manual (T rack editing) 4) Rotate the [MENU/ENTER] knob to select "Change T rack >", and press the [MENU/ENTER] knob. 5) Rotate the [MENU/ENTER] knob to select "Source T rac k = *", and press the [MENU/ENTER] knob. You can now select the desired exchange source track(s) by rotating the [MENU/ENTER] knob. ...

  • Fostex MR-8HD - page 110

    110 MR-8HD Owner ’s Manual (T rack editing) 9) Press the [MENU/ENTER] knob. The display now returns to the track edit menu screen, where “Change Track >” is highlighted. 10) Press the [ST OP] key to e xit the men u mode . <Note>: If you are not satisfied with the re- sult, press the [UNDO/REDO] key to undo the operation (see page 103 ...

  • Fostex MR-8HD - page 111

    111 MR-8HD Owner ’s Manual (Part editing) P ar t editing This chapter describes how to edit a "part" (*) of recorded song. You can edit data of a track or tracks between the "LOCATE A" and "LOCATE B" points. Part editing does not consume the hard disk space. Therefore, the remaining space of the disk does not change ...

  • Fostex MR-8HD - page 112

    112 MR-8HD Owner ’s Manual (Part editing) The time (or bar/beat/clock) value changes in realtime as the recorder moves (i.e. when it plays, fastforwards, rewinds, locates, etc.). When you carry out the locate operation to the LOCATE A or LOCATE B point and the current position matches the locate point, "LocA=" (or "LocB=") is ...

  • Fostex MR-8HD - page 113

    113 MR-8HD Owner ’s Manual (Part editing) TRK 1 TRK 2 TRK 3 TRK 4 TRK 5 TRK 6 TRK 7 TRK 8 Silent LOCA TE A point LOCA TE B point REC END ABS ZERO <Note>: You cannot erase the part(s) of a song which is protected. Release the song protection before erasing the part(s). 1) Load the song y ou want to edit. 2) Set the LOCA TE A and LOCA TE B po ...

  • Fostex MR-8HD - page 114

    114 MR-8HD Owner ’s Manual (Part editing) You can copy the desired part(s) of the selected track(s) and paste it(them) to the same time position of the other desired track(s). The copy/paste operation of a part or parts can be made only within the current song. You can also make the copy/paste operation of a part or parts using another method des ...

  • Fostex MR-8HD - page 115

    115 MR-8HD Owner ’s Manual (Part editing) 10) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “Copy-Paste Part >” is highlighted. 11) Press the [ST OP] key to e xit the men u mode. 6) Rotate the [MENU/ENTER] knob to select "Source T rack = *", and press the [MENU/ENTER] knob. The display n ...

  • Fostex MR-8HD - page 116

    116 MR-8HD Owner ’s Manual (Part editing) You can copy the desired part(s) of the selected track(s) and paste it(them) to the other time position of the desired track(s). Unlike the method described above in "Copying/pasting the desired part(s) (1)", the part data is copied to the (virtual) clipboard and then pasted to the specified pos ...

  • Fostex MR-8HD - page 117

    117 MR-8HD Owner ’s Manual (Part editing) 6) Rotate the [MENU/ENTER] knob to select "Copy T rack >", and press the [MENU/ENTER] knob. The display now shows the screen for selecting the copy source track(s). You can select the copy source track(s) by rotating the [MENU/ENTER] knob. The available options are: • 1 through 8 (mono trac ...

  • Fostex MR-8HD - page 118

    118 MR-8HD Owner ’s Manual (Part editing) 5) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “Paste Part >” is highlighted. 6) Press the [ST OP] ke y to e xit the menu mode. <Note>: If you are going to carry out the paste operation when no data is pasted on the clipboard, the error message (? ...

  • Fostex MR-8HD - page 119

    119 MR-8HD Owner ’s Manual (Part editing) You can move the desired part(s) of the desired track(s) to the other desired track(s). The part move operation can be made only within the current song. After the part move operation is carried out, the source part(s) becomes silent. <Note>: You cannot move data of a song protected. Release the pro ...

  • Fostex MR-8HD - page 120

    120 MR-8HD Owner ’s Manual (Part editing) 9) Rotate the [MENU/ENTER] knob to mo ve the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob. The display shows "Please Wait", immediately followed by "Completed" when the MR-8HD completes the move operation. <Note>: You cannot select the same track(s ...

  • Fostex MR-8HD - page 121

    121 MR-8HD Owner ’s Manual (Part editing) 5) Rotate the [MENU/ENTER] knob to select "Change Part >" in the second page, and press the [MENU/ENTER] knob. The display now shows the screen for selecting the source track(s) and destination track(s) of the exchange operation. Initially, "<< Back" is highlighted. 6) Rotate ...

  • Fostex MR-8HD - page 122

    122 MR-8HD Owner ’s Manual (Part editing) 10) Press the [MENU/ENTER] knob. The display now returns to the part edit menu screen, where “Change Part >” is highlighted. 11) Press the [STOP] ke y to e xit the menu mode. 8) Rotate the [MENU/ENTER] knob to select the destination track(s), and press the [MENU/ENTER] knob. The display shows the s ...

  • Fostex MR-8HD - page 123

    123 MR-8HD Owner ’s Manual (Other functions) Other functions This chapter describes the following functions which are important for using the MR-8HD. (1) Hard disk f ormatting (2) P eak hold time setting (3) Pre-roll/post-r oll time setting (4) Beat resolution mode on/off (5) Phantom power on/off (6) Initializing the MR-8HD <Notes> While a ...

  • Fostex MR-8HD - page 124

    124 MR-8HD Owner ’s Manual (Other functions) You can reformat the MR-8HD internal hard disk by using the FAT32 file system. By reformatting the hard disk, all existing song data on the hard disk is erased, while all setting data including the menu settings are initialized, and a new song (Song01) is automatically created. <Note>: You cannot ...

  • Fostex MR-8HD - page 125

    125 MR-8HD Owner ’s Manual (Other functions) The level meters shown on the display have the peak hold function. When it is enabled, the meter peak value during recording is held for the specified time. The default meter peak hold time is three seconds. You can disable the peak hold function or change the peak hold time. 1) While the recor der is ...

  • Fostex MR-8HD - page 126

    126 MR-8HD Owner ’s Manual (Other functions) As described earlier on page 47, when both the auto punch in/out and loop modes are active, the pre-roll and post-roll are effective in the loop function. You can set the pre-roll and post-roll time value by the following procedure. When both the auto punch in/out and loop modes are active, the loop st ...

  • Fostex MR-8HD - page 127

    127 MR-8HD Owner ’s Manual (Other functions) While the time base is set to the bar/beat mode, if you set the "Beat resolution" item in the menu to "On", the LOCATE A and B points are set in beat resolution. When "Beat resolution" is set to "On", the clock digit in the bar/beat/clock value is automatically r ...

  • Fostex MR-8HD - page 128

    128 MR-8HD Owner ’s Manual (Other functions) The MR-8HD can supply phantom power (+48 V) to the XLR balanced connectors of [INPUT A] through [INPUT D]. So you can connect condenser microphones which require phantom power. You can turn on or off phantom power to the XLR connectors via the menu mode. <Note>: The phantom power can be supplied ...

  • Fostex MR-8HD - page 129

    129 MR-8HD Owner ’s Manual (Other functions) 4) Rotate the [MENU/ENTER] knob to select "On", and press the [MENU/ENTER] knob. The screen shows a warning message for few seconds, and returns to the previous screen. While the message is shown, all input channels are muted. When the message is dismissed, the mute is released. If you select ...

  • Fostex MR-8HD - page 130

    130 MR-8HD Owner ’s Manual (Other functions) By initializing the MR-8HD, you can initialize all global menu settings common to all songs, as well as the time base and display contrast level. 1) While the recor der is stopped, press the [MENU/ENTER] knob to enter the menu mode. The display now shows the first page of the menu selection screen, whe ...

  • Fostex MR-8HD - page 131

    131 MR-8HD Owner ’s Manual (T roubleshooting) T r oubleshooting If you encounter any problem while operating the MR- 8HD, check the following for the possible cause of the problem before contacting our service station or dealer. ...

  • Fostex MR-8HD - page 132

    132 MR-8HD Owner ’s Manual (T roubleshooting) <T rouble 7> During overdubbing, I cannot monitor the playback sig- nal of the recorded track. • Is the track fader f or the pla yback trac k raised? During overdubbing, raise the faders for both the playback and recording tracks appropriately . Otherwise, you cannot make overdubbing while lis ...

  • Fostex MR-8HD - page 133

    133 MR-8HD Owner ’s Manual (T roubleshooting) <T rouble 8> I cannot execute auto punch in/out. • Is " " shown on the screen? If it is not, press the [AUTO PUNCH] key to make the auto punch in/out function active. • Are the punch-in and punch-out points set correctly? T o check each point, press the [LOCA TE A/IN] or [LOCA TE B ...

  • Fostex MR-8HD - page 134

    134 MR-8HD Owner ’s Manual (T roubleshooting) <T rouble 1> I cannot apply the effects. • Are the [EFFECT SEND] control for the trac k you want to appl y the effect and trac k fader raised appropriatel y? Raise the [EFFECT SEND] control(s) for the track(s) (1 through 4) you want to apply the effect to send signal(s) to the internal digital ...

  • Fostex MR-8HD - page 135

    135 MR-8HD Owner ’s Manual (T roubleshooting) <T rouble 1> I cannot hear the rhythm guide click. • Is the [RHYTHM GUIDE] key is illuminated? When the [RHYTHM GUIDE] key is not illuminated, the rhythm guide function is not active and you cannot hear the rhythm guide click. • Is the "Int Click le vel" item in the " Rhythm G ...

  • Fostex MR-8HD - page 136

    136 MR-8HD Owner ’s Manual (T roubleshooting) ...

  • Fostex MR-8HD - page 137

    137 MR-8HD Owner ’s Manual (Specifications) MR-8HD Specifications ...

  • Fostex MR-8HD - page 138

    138 MR-8HD Owner ’s Manual (Specifications) [Inputs/Outputs] 0dBu=0.775V rms, 0dBV=1.0Vrms, Reference level: -12dBfs Analog input [INPUT A - INPUT D] Connectors : XLR-3-31 type (#2: hot balanced) : 1/4-inch, phone type Input level : -48dBu (MIC) to +4dBu (LINE) Input impedance : 1.5k Ω or more : 400k Ω or more (When the INPUT A SEL switch is ...

  • Fostex MR-8HD - page 139

    139 MR-8HD Owner ’s Manual (Specifications) MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A-B PLAY LOCATE ABS ZERO PLAY STOP RECORD REWIND F FWD GUIDE RHYTHM CONTRAST 1-8 > SONG NEW 1-6 > 7/8 1-4 > 5/6 STEREO WA V FILE BOUNCE POWERFUL ...

  • Fostex MR-8HD - page 140

    140 MR-8HD Owner ’s Manual (Specifications) When using the bounce mode (1-4 > 5/6 mode) When using the normal mode DISTORTION CLEAN INPUT A INPUT B INPUT C INPUT D TRIM TRIM TRIM TRIM A/D A/D A/D SIMULA TION FX A/D BAL BAL BAL BAL IN7 IN8 OUT7 OUT8 IN5 IN6 OUT5 OUT6 IN4 OUT4 IN3 OUT3 IN2 OUT2 IN1 OUT1 RECORDER REC SELECT TRK 1 FADER TRK 2 FADE ...

  • Fostex MR-8HD - page 141

    141 MR-8HD Owner ’s Manual (Specifications) When using the bounce mode (1-6 > 7/8 mode) When using the bounce mode (1-8 > New Song mode) DISTORTION CLEAN INPUT A INPUT B INPUT C INPUT D TRIM TRIM TRIM TRIM A/D A/D A/D SIMULA TION FX A/D BAL BAL BAL BAL IN7 IN8 OUT7 OUT8 IN5 IN6 OUT5 OUT6 IN4 OUT4 IN3 OUT3 IN2 OUT2 IN1 OUT1 RECORDER REC SELE ...

  • Fostex MR-8HD - page 142

    142 MR-8HD Owner ’s Manual (Specifications) <Digital multitrac ker> T ransmitted Recognized Remarks Function............ Basic Def ault Channel Changed Def ault Message Altered Mode Note Number : T r ue V oice V elocity Note ON Note OFF After K ey's T ouch Channel's Pitch Bend Control Change Program Change: T rue # System Exclusiv ...

  • Fostex MR-8HD - page 143

    143 MR-8HD Owner ’s Manual (Specifications) <A> Amp simulation ...............................................................58 Auto return ......................................................................45 Auto play .........................................................................45 ABS time ................................. ...

  • Fostex MR-8HD - page 144

    144 MR-8HD Owner ’s Manual (Specifications) Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ord ...

  • Fostex MR-8HD - page 145

    ...

  • Fostex MR-8HD - page 146

    FOSTEX CO . 3-2-35, Musashino, Akishima-shi, T okyo, Japan, 196-0021 FOSTEX AMERICA 13701 Cimarron Avenue Gardena, CA 90249 U.S.A. © PRINTED IN CHINA JUNE 2005 8588062100 428387 ...

Manufacturer Fostex Category Musical Instrument

Documents that we receive from a manufacturer of a Fostex MR-8HD can be divided into several groups. They are, among others:
- Fostex technical drawings
- MR-8HD manuals
- Fostex product data sheets
- information booklets
- or energy labels Fostex MR-8HD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fostex MR-8HD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fostex MR-8HD, service manual, brief instructions and user manuals Fostex MR-8HD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fostex MR-8HD.

Similar manuals

A complete manual for the device Fostex MR-8HD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fostex MR-8HD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fostex MR-8HD.

A complete Fostex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fostex MR-8HD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fostex MR-8HD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fostex MR-8HD, that we can find in the current document
3. Tips how to use the basic functions of the device Fostex MR-8HD - which should help us in our first steps of using Fostex MR-8HD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fostex MR-8HD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fostex MR-8HD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fostex MR-8HD?

Use the form below

If you did not solve your problem by using a manual Fostex MR-8HD, ask a question using the form below. If a user had a similar problem with Fostex MR-8HD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)