-
Cannon IWD - page 1
GB 1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle T echnical data Description of the washing machine and starting a wash cycle, 6-7 Control panel Indicator lights Starting a wash cycle W ash cycles, 8 T able of wash cycles Personalisation, 9 Setting the temperature Setting ...
-
Cannon IWD - page 2
2 GB Installation Levelling the machine correctly will pr ovide it with stability , help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity a ...
-
Cannon IWD - page 3
GB 3 Connecting the drain hose Connect the drain hose, wi- thou t ben ding it, to a dr aining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under -sink trap. Before connecting the drai n ho se from the mach ine ensure that any blanks or removable ends have been taken off the spigot. If it ...
-
Cannon IWD - page 4
4 GB As the colours of the wires in the lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect Green & Y ellow wire to terminal marked E or or coloured Gr een or Green & Y ellow . Connect Br own wire to terminal marked L or coloured Red. Connect Blue wire to terminal marked N o ...
-
Cannon IWD - page 5
GB 5 T e c h n i c a l d a t a Model IWD 71251 Dimensions width 59.5 cm height 85 cm depth 53,5 cm Capacity from 1 to 7 kg Electrical connections please refer to the technical data plate fixed to the machine W ater connection maximum pressur e 1 MPa (10 bar) minimum pressur e 0.05 MPa (0.5 bar) drum capacity 52 litres Spin speed up to 1200 rotation ...
-
Cannon IWD - page 6
6 GB Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry” ). ON/OFF button: switches the washing machine on and off. WAS H CY CLE knob : used to set the desired wash cycle (see “T able of wash cycles”). FUNCTION buttons with indicator light : used to select the available functions. The ...
-
Cannon IWD - page 7
GB 7 Indicator lights The indicator lights provide important information. This is what they can tell you: W ash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in pr ogress. Function buttons and corresponding indicat ...
-
Cannon IWD - page 8
8 GB W ash cycles T able of wash cycles The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inser - ted, load balanc ...
-
Cannon IWD - page 9
GB 9 Personalisation Setting the temperature T ur n the TEMPERA TURE knob to set the wash temperature (see T able of wash cycles ). The temperature may be lower ed, or even set to a cold wash . The washing machine will automatically prevent you fr om selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the ...
-
Cannon IWD - page 10
10 GB Deter gents and laundry Detergent dispenser drawer Good washing results also depend on the corr ect dose of detergent: adding too much detergent will not necessa- rily result in a mor e efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. ! Do not use hand washing detergents ...
-
Cannon IWD - page 11
GB 11 Pr ecautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety r easons and must therefor e be read car efully . General safety • This appliance is not intended for use by persons (inclu - ding children) with r educed physical, ...
-
Cannon IWD - page 12
12 GB Car e and maintenance Cutting off the water and electricity supplies • T urn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and du - ring all maintenance work. Cleaning the washing machine The outer p ...
-
Cannon IWD - page 13
GB 13 T r oubleshooting Y our washing machine could fail to work. Before contacting the T echnical Assistance Centre ( see “Assistance” ), make sur e that the problem cannot be solved easily using the following list. Problem: The machine does not switch on. The wash cycle does not start. The machine does not fill with water or “H2O” will fl ...
-
Cannon IWD - page 14
14 GB The machine is noisy . The machine wont spin properly . The machine leaks from the dispenser . The machine leaks (other than dispenser). The indicator lights on the console are flashing rapidly . The machine smells. The machine door cannot be opened. Door Seal damaged at the bottom. The water level is too low when the machine is washing. Ther ...
-
Cannon IWD - page 15
GB 15 Assistance 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’ s guarantee, which covers the cost of breakdown r epairs for twelve months from the date of pur chase. This gives you the reassurance that if, within that time, your appliance is pr oven to be defective because of either workmanship or mater ...
-
Cannon IWD - page 16
16 GB 195099009.01 01/2012 - Xerox Fabriano After Sales Service No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufactur er . Essential Contact Information Indesit Service We ar e the largest service team in Europe of fering you access to 400 skilled telephone advisors and 1100 fully ...
Do you have a question concerning Cannon IWD?
Use the form below
If you did not solve your problem by using a manual Cannon IWD, ask a question using the form below. If a user had a similar problem with Cannon IWD it is likely that he will want to share the way to solve it.