English dropdown-ico

Manual TechniSat HD S2X

92 pages 0.47 mb
Download

Go to site of 92

Summary
  • TechniSat HD S2X - page 1

    DiSEqC 1.2 Integrated V ideo Recorder P P V V R R For receiving free-to-air and encrypted (e.g. VIACCESS, CONAX, IRDETO, SECA etc.) HD satellite Programmes. With two PCMCIA slots for use with CI modules. Oper a ting manual DigiCor der HD S2X Digital Twin HD-R eceiv er with inte g rated Har d driv e ...

  • TechniSat HD S2X - page 2

    1 Contents 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3 Please read this fir st . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Dispo ...

  • TechniSat HD S2X - page 3

    6.6.7 Network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 7.1 Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • TechniSat HD S2X - page 4

    8.1.2.5 How to programme new event timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 8.1.3 Timeshift function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 8.1.3 Timeshift-Funktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • TechniSat HD S2X - page 5

    3 2 2 Illustrations blue fast forward red rewind yellow Pause, playback green PVR Navigator, Stop On/Standby Programme list on/off Back V olume + Menu on/off Sound on/off Language select* PIP (picture in picture) Sleep timer Option* in TV mode: select sound/subtitles, special functions in radio mode: stations by switching the sound sub-carriers V o ...

  • TechniSat HD S2X - page 6

    Front of unit Back of unit 4 2 LNB input 1 LNB input 2 SCART socket TV Components; Video und Audio- outputs analogue Video- Output Audio outputs digital Audio outputs analogue SCART socket VCR RS 232 interface Mains jack HDMI-output Mains power socket Inserting the CI modules: > Follow the instructions provided by the manufacturers of the CI mod ...

  • TechniSat HD S2X - page 7

    7 1 9.2.4 EPG channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 9.2.5 Selecting a TV channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 9.2.6 Selecting radio channels/programmes . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • TechniSat HD S2X - page 8

    Dear customer , congratulations on your decision to purchase the DigiCorder HD S2X digital receiver . The operating manual supplied is intended to help you utilise the comprehensive functions of your new digital receiver to the fullest extent. We have kept the operating instructions as brief as possible, and have used terminology that everybody can ...

  • TechniSat HD S2X - page 9

    3 Please read this first > Before starting to use your receiver , please check that all the components have been supplied correctly . The following should be included:1 digital receiver , 1 mains cable, 1 remote control, 1 operating manual, 1 guarantee card, 2 batteries (1.5V microcells). > Please insert the batteries supplied into the batter ...

  • TechniSat HD S2X - page 10

    Safety notes For your own protection, please read through the safety precautions carefully before proceeding to operate your new unit. The manufacturer will accept no liability for injuries or damage caused by inappropriate handling or non-compliance with the safety precautions. - The appliance has a fully integrated hard drive. There is no provisi ...

  • TechniSat HD S2X - page 11

    In the following cases you should disconnect the receiver from the mains power , and should consult an expert: > the mains cable or the mains plug are damaged > the receiver was exposed to liquid, or liquid has run into the unit > in case of severe malfunctions > in case of significant external damage When not in use During a storm or w ...

  • TechniSat HD S2X - page 12

    4 Connecting the DVB receiver a. Mains connection b. Connection between the LNB 1 and the LNB input 1 of the DVB receiver . (Please note: when operating the unit with one antenna signal, the LNB must be connected to the LNB input 1 .) c. Connection between the LNB 2 and the LNB input 2 of the DVB receiver . d. HDMI connection of the DVB receiver wi ...

  • TechniSat HD S2X - page 13

    The references a b c etc. mentioned below relate to the illustration on page 12. 4.1 Mains power connection The digital receiver should only be connected to the mains power supply when all the cable connections with other components of the system have been made. This helps to avoid damage to the digital receiver as well as to other components. a Wh ...

  • TechniSat HD S2X - page 14

    4.4 Video cassette recorder (VCR) f Connect the video recorder to the SCART socket VC R . During playback, the video recorder will provide a switching signal to the digital receiver . This will allow the video recorder signal to be routed automatically to the TV set. If your video recorder does not supply a switching current, use the 0/A V key to s ...

  • TechniSat HD S2X - page 15

    5 Initial installation After you have read the safety notes and connected the unit as described in Chapter 4, switch the unit on as described in Chapter 7. When switching on the receiver for the first time, the starting window of the installation assistant AutoInstall will be displayed. The installation assistant allows you to make the most importa ...

  • TechniSat HD S2X - page 16

    > Use the gr een function key Accept to confirm and accept the selection, and to go to the antenna configuration Antenna configuration This step of the installation allows you to adjust the setting of your digital receiver to the configuration of your antenna. > If you wish to accept the standard antenna configuration, press the gr een functi ...

  • TechniSat HD S2X - page 17

    All the satellites included in your antenna configuration will be scanned for Programmes. This procedure may take a few minutes. Please note any messages displayed on screen. Loading EPGplus data Y our digital receiver has an Electronic Programme Guide, EPGplus Electronic Programme Guide. Y our receiver must first download the EPGplus data from the ...

  • TechniSat HD S2X - page 18

    6 Settings Now that you have connected your new digital receiver , and commenced operating it, you can, if you wish, proceed to optimise its functions for your preferences. 6.1 Operating language This menu item gives you the opportunity of setting the language used in all the menus according to your preference. > Use the Menu key to call up the ...

  • TechniSat HD S2X - page 19

    6.2.3 Date/hour In this menu point decide whether the hour and the date should be automatically read in from a determined programme after switching on. > By pressing the OK key another window will open. > In this window use the up/down arr ow k eys to select either the entry Automa tic or select the programme from which the hour and the date ...

  • TechniSat HD S2X - page 20

    > Now , using the up/down ar row k eys , mark the line Pictur e Settings . > Confirm by pressing OK . The Menu Picture settings will appear . > Use the ar row k eys up/down to move the marker within the menu and to change the individual positions as indicated. When selecting a menu item, please also note any messages displayed on screen. T ...

  • TechniSat HD S2X - page 21

    > Confirm by pressing OK . The Menu Picture settings will appear 6.4.1 Audio speech > In this line, use the ar row k eys left/right to select your preferred language. Where an appropriate signal is broadcast, this function will, after a scan, automatically set this language. 6.4.2 Sub-title language Y our DVB receiver is able to display subti ...

  • TechniSat HD S2X - page 22

    prematurely terminated, the satellite positions ASTRA and EUTELSA T will be pre- programmed. If you also wish to receive other satellites, or if you are using a different LNB, set your digital receiver to the desired data as follows: > Use the Menu key to call up the Main menu . > Use the ar row k eys up/down to mark the line Settings . > ...

  • TechniSat HD S2X - page 23

    - Record a programme and at the same time another programme from the same reception field (1 programme in HD format and 1 programme in SD format or 25 programmes in SD format) or show any programme from the hard drive. - Simultaneously record two programmes from the same reception band (15 programme in HD format and 1 programme in SD format or 2 pr ...

  • TechniSat HD S2X - page 24

    System examples 6.5.5 Additional settings/LNB properties Once you have completed adjusting the switching matrix of your DVB receiver to the requirements of your receiving installation, you must still check and, where necessary , correct the other settings for your receiving unit. > Use the left/right ar row k eys to move the marker to the column ...

  • TechniSat HD S2X - page 25

    Polarisa tion > Use the up/down arr ow keys to enter the desired polarisation plane ( horiz ontal or ver t ical). Symbol rate The symbol rate indicates the volume of data broadcast per second. This figure could be shown as, for example, 27500 (27500 symbols per second). > Use the numeric k eys to enter the correct symbol rate. User LNB If you ...

  • TechniSat HD S2X - page 26

    If the function is switched on you can configure four lists of favourites (main list, favourites 1, favourites 2 and favourites 3). The ex-works programming can be found in the main list. When the function is switched off only the main list is active. 6.6.2 Display time Information Banner > Use the numeric k eys to set the desired display time f ...

  • TechniSat HD S2X - page 27

    > Press the red function key Bac k . A corresponding query then appears. > If you wish to accept the changes, use the ar row k eys left/right to click on the field Ye s , and confirm by pressing OK . Y ou will now return to the previous menu. > Press the TV/Radio key to return to normal operation. Settings will not be saved. 27 6 ...

  • TechniSat HD S2X - page 28

    7 Operation 7.1 Switching on and off > Switch the digital receiver on by pressing the On/Standby either on the receiver or on the remote control. > Press the key again to switch the receiver off again. > The receiver is now in standby mode, and (if activated in Point 6.2.4) the display panel will show the current time. If the time is not s ...

  • TechniSat HD S2X - page 29

    > Press the OK key . The active programme list will be displayed. > Now , with the assistance of the option key you can open a window with the types of programme lists ( TV lists , TV pr ovider lists and overall TV list s). The active programme list type is marked. > Use the ar row k eys up/down to select, e.g. the programme list type T ot ...

  • TechniSat HD S2X - page 30

    > Insert a CI module in one of the slots. > Insert the Smartcard in the card slot of the CI module. Ensure that the gold-coloured chip of the Smartcard is on the upper surface, in the direction in which the card is inserted. > If you now select an encrypted programme, the digital receiver will automatically check the slot, and will display ...

  • TechniSat HD S2X - page 31

    7.4 V olume control Y ou have the facility to adjust the volume of your digital receiver . This facilitates the easy operation of the receiver , as it means you have all the important functions on a single remote control, and will only rarely have to resort to using the remote control of the television set. When you switch on the digital receiver , ...

  • TechniSat HD S2X - page 32

    > Use the TV/Radio key to switch the digital receiver to radio mode. The receiver will now switch to the last radio programme previously selected. > Press the TV/Radio key again to return to the last television programme previously selected 7.7 Return to last programme previously selected > Press the Back key on the remote control to retur ...

  • TechniSat HD S2X - page 33

    7.12 Videotext 7.12.1 Using the Videotext decoder of your television set If transmitted, the Videotext is forwarded to your television set. T o operate the videotext options, you must use the remote control of your television set. If there should be any problems related to the display on your television screen, such as an overlapping of videotext c ...

  • TechniSat HD S2X - page 34

    7.13 Subtitles Where subtitles are broadcast, this will be indicated by the message Subtitle select . If you have switched on the function Subtitles (as per Point 6.4.2), these will be displayed automatically , provided that they are being broadcast in the language selected. If subtitles are being broadcast only in other languages, or are broadcast ...

  • TechniSat HD S2X - page 35

    - to simultaneously reproduce two programmes (1 programme in HD format and 1 programme in SD format or 2 programmes in SD format) even if these are received from differing fields of reception. - to reproduce a programme of your choice and simultaneously reproduce a hard drive recording of your choice. If only one connector is available for an anten ...

  • TechniSat HD S2X - page 36

    The EPGplus functions allow you to: - display information on programme contents on the screen - display preview pictures of individual programmes - mark specific programmes that will then be automatically switched on when the programme begins - programme timers - search for and select programmes by type of programme (genre). 7.16.1 Downloading EPGp ...

  • TechniSat HD S2X - page 37

    > Use the left/right ar row k eys to move through the programme list one page at a time. The EPGplus functions (Point 7.16.7) are now available. > Pressing the yello w function key takes you to the “ Next ” EPGplus table (see Point 7.16.5) or > Press the TV/Radio key to return to normal operation. 7.16.5 Next > Y ou can call up the ...

  • TechniSat HD S2X - page 38

    corresponding programme. If there is a picture available, it is indicated by . > Use the ar row k eys or the function keys to mark the desired programme. > Press the EPG key to display information and/or the picture relating to the programme. > Lengthy information text can be moved or paged through with the help of the ar row k eys . > ...

  • TechniSat HD S2X - page 39

    programme automatically from the EPGplus data. Both the starting and the ending time of the programme will be taken over correct to the nearest minute. However , it frequently happens that the selected programme starts a little earlier or a little later than scheduled. In this case the start or the end of the programme may be missing from the recor ...

  • TechniSat HD S2X - page 40

    If you are interested in specific types of programmes, you can have the programme information displayed by various genres, e.g. movies, news, etc. > Press the EPG key to open the table “ Now ”. > Press the blue function key EPG Menu to open a selection window . > Use the ar row k eys up/down to mark the line Genres and confirm by press ...

  • TechniSat HD S2X - page 41

    8 Hard drive operation Y our PVR receiver ( PVR = P ersonal V ideo R ecorder) is equipped with an integrated hard disk drive. There is no provision for this drive to be exchanged other than by an authorised T echniSat retailer/technician. Due to the availability of the hard drive, you no longer require an external storage medium (e.g. a video recor ...

  • TechniSat HD S2X - page 42

    - Simultaneously record 2 programmes from the same reception band (1 programme in HD format and 1 programme in SD format or 2 programmes in SD format) and reproduce a pre-recorded programme 8.1.1 Instant recording Starting a recording manually Option 1 > Switch on the channel on which the programme is being broadcast that you wish to record. > ...

  • TechniSat HD S2X - page 43

    > Use the ar row k eys up/down to mark the line with the desired action. > Confirm by pressing OK . The receiver will record the whole programme and then go into standby mode. > If you switch the receiver on before the end of the programme, a query will be displayed, asking whether you wish to start the current programme at the Beginning , ...

  • TechniSat HD S2X - page 44

    8.1.2.1 Manual programming of timer > Use the Menu key to call up the Main menu . > Use the ar row k eys up/down to mark the line Manage timer . > Confirm by pressing OK . The sub-menu Manage Timer will be displayed. > Use the ar row k eys up/down to select the desired T imer type. > Press the OK key to go to the entry window used fo ...

  • TechniSat HD S2X - page 45

    6-7 Repeat only on weekdays > Use the ar row k eys up/down to select the desired function. > Confirm and accept the setting by pressing OK . Saving da ta to memor y > When you have completed the programming, press the gr een function key Accept , to transfer the data to memory . If under Channel you have selected a channel that is blocked ...

  • TechniSat HD S2X - page 46

    > Press the gr een function key New to go to the entry window for programming a new timer event. Now make your settings here in accordance with Point 8.1.2.1. > Use the ar row k eys up/down to mark the additional field Type displayed. > Confirm by pressing OK . A window will be opened, listing the T imer types available. > Use the ar ro ...

  • TechniSat HD S2X - page 47

    > T o go to a specific point in a cur rentl y r unning recor ding , you can use the functions Play , Pause as well as Fast Wind and the Jogshuttle , as described in Point 8.2. > Press the Info key to display the Infobox with a progress bar , showing the playing and recording time elapsed. 8.1.4 Setting markers while recording > Press the R ...

  • TechniSat HD S2X - page 48

    playback procedure by pressing OK . 8.2.1.2 Pause/Freeze frame > T o stop the playback of a recording (freeze frame) press the yello w function key or the F r eeze frame key while the playback is in progress. The message “ Pause  II ” will be displayed. > Press the respective key again to continue playback from the same spot. 8.2.1.3 F ...

  • TechniSat HD S2X - page 49

    > Press the right or the left arrow key while  or  is displayed in order to skip forw ar d or back by 10 minutes. Create Picture > Press the Record key to store a single picture on the hard drive. Y ou can call up pictures created in this way as described under Point 8.2.3 and manage them as described under Point 8.3.2 ...

  • TechniSat HD S2X - page 50

    8.2.2.1 On-screen controls Y our receiver is capable of playing files in MP3 format that have been stored on the hard drive or on a storage medium attached to the USB port. The USB device should be formatted using the file system F A T 32.Consult Point 8.3.2 on how to copy files from a USB device onto the hard drive. > While in normal operating ...

  • TechniSat HD S2X - page 51

    An MP3file will be indicated on the display with its respective name, e.g. Ster ne.mp3 . A folder will be indicated by a display of square brackets, e.g. [Popmusic] . The hard drive will be displayed as hard drive and a USB device will be indicated as USB-device1 , USB-device2 etc.. > While the receiver is in standby mode, press the Language sel ...

  • TechniSat HD S2X - page 52

    The various modes are shown on screen resp. on the display panel as follows: 8.2.2.4 Playlist T o draw up a play list Y ou have the possibility of drawing up a playlist so that you have more convenient access to the replaying of MP3-files or radio recordings. > While in normal operating mode, press the gr een function key to open the PVR navigat ...

  • TechniSat HD S2X - page 53

    A list of the MP3 files available on the hard drive or the USB device will appear . These are indicated by the symbol . Folders located on the hard drive resp. on the USB device will be indicated by the symbol . Y ou find yourself in the viewport. > In order to change to the replay list viewport press the option key and mark the line Replay List ...

  • TechniSat HD S2X - page 54

    > Use the up/down arr ow k eys to mark the line Pictures and confirm with OK . > Use the ar row k eys up/down to select the source from which you wish to view the picture files, and confirm by pressing OK . A list showing the picture files available on the hard drive or on the USB device will be displayed. These are indicated by the symbol . ...

  • TechniSat HD S2X - page 55

    > Use the ar row k eys up/down to select the source from which you wish to view the picture files, and confirm by pressing OK . A list showing the picture files available on the hard drive or on the USB device will be displayed. These are indicated by the symbol . Folders located on the hard drive resp. on the USB device will be indicated by the ...

  • TechniSat HD S2X - page 56

    gr een function key PLS - . T o delete a playlist > While in normal operating mode, press the gr een function key to open the PVR navigator . > By pressing the blue function key NA V Menu a further window will be opened. > Use the up/down arr ow k eys to mark the line Pictures and confirm with OK . > Use the up/down arr ow k eys to sele ...

  • TechniSat HD S2X - page 57

    as a standard feature. In addition, a yellow progress bar (3) will be displayed, showing the current playback position and the total duration of the recording. > T o skip to a marked spot of the recording, use the ar row k eys up/down to mark the desired marker , and confirm by pressing OK . Going to any spot of the recording > Use the colour ...

  • TechniSat HD S2X - page 58

    the line rename mar k . > Confirm by pressing OK , to open the virtual keyboard, in order to enter a new name. > Use the yello w function key to alternate between upper and lower case letters. > Use the ar row k eys to mark the first letter resp. the first symbol or figure if the name you wish to enter . > Confirm this by pressing OK . ...

  • TechniSat HD S2X - page 59

    markers. > T o do this, mark the beginning and the end of the section to be removed with one mark each as described under Setting a mar k . > Now use the ar row k eys up/down to set the marker indicating the beginning of the section to be copied. The section to be copied will now be indicated in red on the progress indicator as well as in the ...

  • TechniSat HD S2X - page 60

    > If you wish to give the recording a different, specific name, then use the arr ow k eys up/down to mark the line New . > If you press the OK key , the virtual keyboard will be displayed, and you can enter a new name as described under Renaming a mark . Enlarging a video T o make it easier getting to a specific point on a recording, you can ...

  • TechniSat HD S2X - page 61

    8.3.2.1 Copying The Copy function will ef fect a copy of the marked file resp. folder to be stored on the hard drive, resp. the USB device. The original file resp. the original folder will remain unchanged. > Use the ar row k eys up/down to mark the file resp, the folder you wish to copy on to the hard drive. resp. on to the USB device. > Pre ...

  • TechniSat HD S2X - page 62

    > Use the ar row k eys up/down to mark the file or folder you wish to delete. > Press the blue function key Functions to open a window showing the functions available. > Use the ar row k eys up/down to mark the line Delete and confirm by pressing OK . > T o delete the marked file resp. the marked folder, you must now press the y ellow f ...

  • TechniSat HD S2X - page 63

    > Use the arrow keys up/down to mark the line Export and confirm by pressing OK . > T o copy the marked file, you must now press the yello w function key Expor t . The marked file will now be copied to the USB device, and will then be displayed on the right half of the menu. Please note that this procedure may take quite some time, depending ...

  • TechniSat HD S2X - page 64

    8.3.5 Hard drive maintenance > Press the OK key to obtain an overview of the number of recordings as well as the degree to which the hard drive is filled with data. 8.3.5.1 Checking the hard drive > T o perform a check of the hard drive, use the ar row k eys left/right to mark the field Check . > Press the OK key , then confirm the message ...

  • TechniSat HD S2X - page 65

    9 Changing the basic programming 9.1 Configuring the Favourites list This chapter describes how you may change the pre-programming of your digital receiver as well as the Favourites programme list in accordance with your preferences. This function is also required to sort new programmes into the list after a programme scan. T o work with this funct ...

  • TechniSat HD S2X - page 66

    > Using the up/down arr ow k eys select the desired programme lists (e.g. languages ). > Confirm by pressing OK . An additional selection window will now be opened. > Now use the ar row k eys up/down to mark the selection criterion you wish to apply in sorting the T otal list. Select, for instance, All Ger man to display German- speaking b ...

  • TechniSat HD S2X - page 67

    > T o remove several programmes simultaneously , mark these as described in Point 9.1.4 ( Marking blocks ). > When you have completed marking the desired programmes in this manner , press the yello w function key Remo ve . The programmes removed in this manner remain included in the T otal list, and can be transferred back to the Favourites l ...

  • TechniSat HD S2X - page 68

    9.2 Programming the electronic programme guide Y our receiver gives you the option of receiving a data channel with additional EPGplus data via ASTRA satellite systems (19.2° East). This data makes it possible to preview EPGplus information for up to a week. > Use the Menu key to call up the Main menu . > Use the ar row k eys up/down to mark ...

  • TechniSat HD S2X - page 69

    > If you select the start category Genres you can then also select the preferred genre (e.g. film, news, shows, etc.) as described above. 9.2.4 EPG channel > Press the OK key to call up the EPG channel submenu. If the parameters of the data channel required to load the EPGplus data have changed, you can correct them in this menu. Current tran ...

  • TechniSat HD S2X - page 70

    message Loading EPG and an indication of the EPGplus data already downloaded in the display panel. > The downloading procedure can be interrupted by switching the digital receiver on ( On/Standby key). 9.2.6 Selecting radio channels/programmes Use the same procedure as described in Point 9.2.5 to include radio channels/stations in the programme ...

  • TechniSat HD S2X - page 71

    > Now use the numeric k eys to enter the current unit PIN code in the line Unit PIN ( factor y setting 0000 ). > In the line Enter new PIN use the numeric keys to enter the desired new unit PIN code. > Repeat the entry in the line Repea t new PIN . > When you have completed changing the PIN code in this manner , you will be taken back a ...

  • TechniSat HD S2X - page 72

    1. Automatic Scan Select this type of search to scan all the satellites set in the menu Antenna settings (Point 6.4 and 10.4) for Programmes. 2. Satellite Scan Select this type of search to scan only a specific selected satellite for Programmes. 3. T r ansponder Scan Select this type of search to scan a specific transponder of a single satellite fo ...

  • TechniSat HD S2X - page 73

    > Use the ar row k eys up/down to mark the line Search mode . > By pressing the OK key , decide whether you wish to scan only for free-to-air programmes ( F r ee prog rammes ), or whether you wish to include encrypted programmes in the search ( All prog rammes ). > Use the ar row k eys up/down to mark the field Star t sear ch . Please also ...

  • TechniSat HD S2X - page 74

    9.4.4 Manual search Should a programme not be found in the course of an automatic search, a satellite search or a transponder search, it may be necessary to enter additional programme-specific PID numbers for this programme. Y ou will need to obtain these numbers on the Internet, or possibly direct from the programme provider concerned. The menu di ...

  • TechniSat HD S2X - page 75

    Back The newly found programmes are not added to the Favourites list, and are retained only in the T otal list. > Use the ar row k eys left/right to select the desired procedure. > Confirm by pressing OK . Please note any messages displayed on screen. > Press the Menu key to return to normal operation Independently of whether you have tran ...

  • TechniSat HD S2X - page 76

    9.5.3 Updating the programme list (ISIPRO) The ISIPRO programme list updating function ensures that the programme list of your receiver will automatically be kept up to date. T o do this, a current programme list is broadcast at regular intervals via satellite (ASTRA 19,2° East) and is available to your receiver for downloading. Should the paramet ...

  • TechniSat HD S2X - page 77

    > T o update the new programme list automatically , press the g reen function key Automatic . The downloading of the programme list will be started, and the progress of the procedure can be followed on screen 9.5.3.4 Update programme list manually When the download of the programme list has been completed, your programme list will be updated. T ...

  • TechniSat HD S2X - page 78

    Accept all prog rammes > T o accept and transfer all new programmes without a further check, press the yello w function key Automatic . The programmes will be added to the Favourites list in accordance with predetermined criteria Reject programme (do not accept) > If you do not wish to accept the indicated programme, and all the following pro ...

  • TechniSat HD S2X - page 79

    software for your digital receiver is available. If a new version of the operating software is available, this will be indicated by a message displayed on screen. T o start an update of the software, simply follow the instructions on screen. When the update of the software has been successfully completed, an appropriate message will be displayed on ...

  • TechniSat HD S2X - page 80

    10 Use with a rotating antenna (DiSEqC 1.2) Y our digital receiver is ready for use with a motorised rotating antenna. Using the DiSEqC control (DiSEqC level 1.2) you have the facility to control a suitable motor via the co-axial cable. > Call up the Antenna settings menu as described under Point 6.4 and switch the DiSEqC control (Point 6.5.1) o ...

  • TechniSat HD S2X - page 81

    10.1.3 Setting the West limit > T o enter the West limit, first use the ar r ow k eys to mark the field Save . > Now press the ar row k ey left to rotate the dish to the maximum West position possible, resp. desirable. > T o open the window listing the available actions, press the blue function key Actions . > Now use the ar row k eys u ...

  • TechniSat HD S2X - page 82

    Example: Co-ordinates of Daun/Germany Deg. latitude 50 ° 11 ‘( 45 “) N Deg. longitude 06° 50‘ (10‘‘) E Converting the degrees latitude (DL): DL = 50 + 11/60 DL = 50 + 0,2 (rounded) DL = 50,2 In the menu used for entering the geographical latitude, enter the value rounded to one decimal place (50.2). The decimal value of the degrees long ...

  • TechniSat HD S2X - page 83

    > When you have completed setting the test transponder , press the Back key to return to the menu for setting the motorised antenna. > Use the ar row k eys to mark the panel fort he entry of the orbital position of the User-Satellites. > Use the numeric k eys to enter the orbital position of the user satellite. > Now press the OK key ap ...

  • TechniSat HD S2X - page 84

    > T o open the window listing the available actions, press the blue function key Actions . > Now use the ar row k eys up/down to mark the line Autofocus . > Confirm by pressing OK . Autofocus is started. Whilst the automatic alignment is being done the message Auto F ocus appears 10.3.3 Saving a satellite position When you have completed t ...

  • TechniSat HD S2X - page 85

    > By pressing the yello w function key Tur n to Sat the antenna will be turned to the selected satellite position. 10.5 Deleting a satellite position T o delete a satellite position from the satellite list, proceed as follows: > Use the ar row k ey s to mark the field Cur rent satellite list . > T o open the current satellite list, press t ...

  • TechniSat HD S2X - page 86

    12 T echnical data DBS-T uner 1. SA T F r ont End (with D VB-S2) Input frequency range 950 ... 2150 MHz Demodulation DVB-S (QPSK); DVB-S2 ((8PSK,QPSK) Symbolrate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK) 2. SA T F r ont End (without D VB-S2) Input frequency range 950 ... 2150 MHz Demodulation DVB ...

  • TechniSat HD S2X - page 87

    Audio decoding Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz Audio parameters Output analogue Output level L/R 0.5 V r .m.s. (nominal) Output impedance 600 Ohms THD > 60 dB S/N > 60 dB Cross-talk < - 65 dB V olume when switched on Automatically sel ...

  • TechniSat HD S2X - page 88

    HDMI-output HDCP copy protection (rev 1.1 or later) HDMI downwards-compatible to DVI Mains jack Ethernet 10/100baseTx Socket RJ45 Auto-MDIX cable cross-over Hard drive Hard drive type 3.5 inch Hard drive controller intended for 160 to 500 GB No. of recordings 999 (max.) max. duration of recording 26 hours per recording Display V acuum fluorescence ...

  • TechniSat HD S2X - page 89

    Remote control Remote control system RC-5 Subsystem address 8 (SA T 1), 10 (SA T 2) Modulation frequency 36 kHz Infrared wavelength 950 nm Power supply Power unit internal switching power supply Consumption: < 1 W* in standby mode (standby LED) < 3 W* in standby mode (standby clock) 24 W operation (without LNB supply , without hard drive) 40 ...

  • TechniSat HD S2X - page 90

    13 T roubleshooting guide Problem Possible cause Solution V arious programmes not shown in the programme list Wrong programme list selected Select different programme list (see Point 7.2.3.1) Sound OK, no TV picture Radio mode switched on Switch to TV mode Programmes such as DSF and T ele 5 show occasional interference Interference from DECT cordle ...

  • TechniSat HD S2X - page 91

    Problem Possible cause Solution T ime not shown in standby mode T ime not acquired Set to major channel e.g. ZDF for approx.30 seconds Receiver cannot be operated Unit blocked > Press and hold On/standby key on unit or remote control for approx. 5 seconds. Unit cannot be switched on or operated Unit blocked Perform Flash reset: Note! All persona ...

  • TechniSat HD S2X - page 92

    For everyday use Switching on and off > Switch the digital receiver on by pressing the on/standby key on either the unit itself or on the remote control. > Press the key again to switch the receiver off again. > The unit is now in standby mode; the time will be shown in the display on the unit. Programme selection Using the programme up/do ...

Manufacturer TechniSat Category CD Player

Documents that we receive from a manufacturer of a TechniSat HD S2X can be divided into several groups. They are, among others:
- TechniSat technical drawings
- HD S2X manuals
- TechniSat product data sheets
- information booklets
- or energy labels TechniSat HD S2X
All of them are important, but the most important information from the point of view of use of the device are in the user manual TechniSat HD S2X.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TechniSat HD S2X, service manual, brief instructions and user manuals TechniSat HD S2X. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TechniSat HD S2X.

Similar manuals

A complete manual for the device TechniSat HD S2X, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TechniSat HD S2X by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TechniSat HD S2X.

A complete TechniSat manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TechniSat HD S2X - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TechniSat HD S2X, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TechniSat HD S2X, that we can find in the current document
3. Tips how to use the basic functions of the device TechniSat HD S2X - which should help us in our first steps of using TechniSat HD S2X
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TechniSat HD S2X
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TechniSat HD S2X in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TechniSat HD S2X?

Use the form below

If you did not solve your problem by using a manual TechniSat HD S2X, ask a question using the form below. If a user had a similar problem with TechniSat HD S2X it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)