English dropdown-ico

Manual Spectrum 2E42_27

77 pages 0.48 mb
Download

Go to site of 77

Summary
  • Spectrum 2E42_27 - page 1

    F ast Ethernet SmartSwitch Modules Management Module Guide (8H02_16, 2E42_27, 2E42_27R, 2E43-27, 2E43-27R) ® ...

  • Spectrum 2E42_27 - page 2

    9032073 E2 i Notice Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made . The hardware , firmw are, or software described in this manual is subject ...

  • Spectrum 2E42_27 - page 3

    F ast Ethernet SmartSwitch Module ii Management Module Guide Restricted Rights Notice (Applicable to licenses to the United States Government only.) 1. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in T echnical Data and Computer Software clause at DF ARS 252.227 ...

  • Spectrum 2E42_27 - page 4

    9032073 E2 iii Contents Preface What Is in This Guide .......................................................................................................... ix Conventions ............................................................................................................................x Related SPECTRUM Documentation ................. ...

  • Spectrum 2E42_27 - page 5

    F ast Ethernet SmartSwitch Module iv Management Module Guide Chapter 2 Device Views (continued) Logical P orts Labels ............................................................................................. 2-16 Logical P orts Icon Subviews Menu ..................................................................... 2-16 Physical Device View ... ...

  • Spectrum 2E42_27 - page 6

    9032073 E2 v F igures Chapter 1 Introduction Figure 1-1. Using Double-Click Zones to Access SPECTRUM Views ................................... 1-3 Figure 1-2. Using the Icon Subviews Menu to Access SPECTRUM V iews .......................... 1-4 Figure 1-3. Accessing Device-Specific Subviews ......................................................... ...

  • Spectrum 2E42_27 - page 7

    F ast Ethernet SmartSwitch Module vi Management Module Guide ...

  • Spectrum 2E42_27 - page 8

    9032073 E2 vii T ables Chapter 2 Device Views Table 2-1. Interface Icon Subviews Menu .............................................................................. 2-4 Table 2-2. Administrative Status for the Physical or MIB II Application ........................... 2-4 Table 2-3. Administrative Status for the Bridging Application ............... ...

  • Spectrum 2E42_27 - page 9

    F ast Ethernet SmartSwitch Module viii Management Module Guide ...

  • Spectrum 2E42_27 - page 10

    9032073 E2 ix Preface Use this guide as a reference for the SPECTRUM F ast Ethernet SmartSwitch Module management software . Before using this guide , you should be familiar with SPECTRUM’ s functions and na vigational techniques as described in the Administrator’s Reference and the Operator’s Reference . F or the purposes of this guide, a F ...

  • Spectrum 2E42_27 - page 11

    Conventions Preface F ast Ethernet SmartSwitch Module x Management Module Guide Conventions This guide uses the following conventions: • Menu selections and buttons referenced in text appear in bold ; for example, Configuration or Detail . • Buttons appear as shadowed boxes when describing their use; for example: • Menu navigation appears in ...

  • Spectrum 2E42_27 - page 12

    9032073 E2 Preface xi Other Related Documentation Other Related Documentation Refer to the following documentation for more information on managing TCP/ IP-based networks: Martin, James , Kathleen Kavanagh Chapman, J oe Leben. Local Area Networks, Architectures and Implementations , 2nd ed. Englewood Cliffs , NJ: Prentice Hall, 1994. Rose, Marshall ...

  • Spectrum 2E42_27 - page 13

    Other Related Documentation Preface F ast Ethernet SmartSwitch Module xii Management Module Guide ...

  • Spectrum 2E42_27 - page 14

    9032073 E2 1-1 Chapter 1 Introduction What Is in This Chapter This chapter introduces the SPECTRUM management module covering the F ast Ethernet SmartSwitch Modules described below . It describes the following: • F ast Ethernet SmartSwitch Modules • SPECTRUM Support - Accessing SPECTRUM Views from the Device Icon - Accessing Device-Specific Su ...

  • Spectrum 2E42_27 - page 15

    SPECTRUM Support Introduction F ast Ethernet SmartSwitch Module 1-2 Management Module Guide The 2E43-27 and 2E43-27R provide the same feature set as the 2E42-27 and 2E42-27R but come equipped with two RJ21 connectors to support 24 ports of switched Ethernet rather than the 24 RJ45’ s. This allows the use of T elco cables in the wiring closets wit ...

  • Spectrum 2E42_27 - page 16

    9032073 E2 Introduction 1-3 SPECTRUM Support Accessing SPECTRUM V iews from the Device Icon Figure 1-1. Using Double-Click Zones to Access SPECTRUM Views Accesses the Device T opology view; refer to the Operator ’s Reference . Accesses the Device views; refer to Chapter 2, Device V iews . Accesses the Device T opology view; refer to the Operator ...

  • Spectrum 2E42_27 - page 17

    SPECTRUM Support Accessing SPECTRUM V iews from the Device Icon Introduction F ast Ethernet SmartSwitch Module 1-4 Management Module Guide Figure 1-2. Using the Icon Subviews Menu to Access SPECTRUM Views Go Back Go Up Icon Subvie ws View P ath New Vie w Bookmarks View History Current View Info ... Notes... Jump b y name... Zoom Map Hierarch y P ag ...

  • Spectrum 2E42_27 - page 18

    9032073 E2 Introduction 1-5 SPECTRUM Support Accessing Device-Specific Subviews Accessing Device-Specific Subviews Icon Subviews menus provide access to views that display device-specific information. Figure 1-3 shows an example of an Icon Subviews menu for the Bridging icon located within the Chassis Device view . The device-specific Icon Subv ...

  • Spectrum 2E42_27 - page 19

    SPECTRUM V iews Roadmap Introduction F ast Ethernet SmartSwitch Module 1-6 Management Module Guide SPECTRUM V iews Roadmap Figure 1-4 shows a “roadmap” of the SPECTRUM views for this device. These views are accessible from double-click zones (Figure 1-1) and Icon Subviews menus (Figure 1-2 and Figure 1-3). ...

  • Spectrum 2E42_27 - page 20

    9032073 E2 Introduction 1-7 SPECTRUM V iews Roadmap Figure 1-4. SPECTRUM V iews Roadmap P erformance V iew , refer to the Operator ’s Reference . DevT op View , refer to the Operator ’s Reference . Device V iews, refer to Chapter 2, Device V iews . Interface Device View Chassis Device View Device Configuration View P ort Configuration V iew B ...

  • Spectrum 2E42_27 - page 21

    SPMA Support Introduction F ast Ethernet SmartSwitch Module 1-8 Management Module Guide SPMA Support SPECTRUM also supports SPECTRUM P ortable Management Application (SPMA) functionality for these devices. Figure 1-5 shows an example of an SPMA Applications view . T o open the SPMA Applications view , do the following: 1. Highlight the Device icon. ...

  • Spectrum 2E42_27 - page 22

    9032073 E2 Introduction 1-9 SPMA Support This button accesses the Community Names T ool, whic h allows you to c hange device community names . Refer to Chapter 3, Using the SPMA Community Names T ool , of the T ools Guide . This button accesses the Frame Priorities window , which allows you to set the priority in which frames types are queued for t ...

  • Spectrum 2E42_27 - page 23

    SPMA Support Introduction F ast Ethernet SmartSwitch Module 1-10 Management Module Guide This button provides an overview of bridging information for each port and allows you to access all other bridge-related options. Refer to the 2E42 User ’ s Guide . This button accesses the MIB I, MIB II T ool, whic h allows you to change MIB I and MIB II obj ...

  • Spectrum 2E42_27 - page 24

    9032073 E2 2-1 Chapter 2 Device V iews What Is in This Chapter This chapter describes the following Device views and subviews available for the F ast Ethernet SmartSwitch Modules . • Interface Device view • Chassis Device view • Physical Device view Refer to Chapter 1, Introduction, for information on accessing SPECTRUM views from the Device ...

  • Spectrum 2E42_27 - page 25

    Interface Device V iew Device V iews F ast Ethernet SmartSwitch Module 2-2 Management Module Guide Figure 2-1. Interface Device V iew * File View Help? Primar y Landscape of 8H02_16 Filter Interface Description Network Information ADDRESS Physical Model Contact Description Location Network Address System Up Time Manuf acturer Device T ype Serial Nu ...

  • Spectrum 2E42_27 - page 26

    9032073 E2 Device V iews 2-3 Interface Device V iew Interface Icon Interface Icon These icons represent the interfaces or ports of the device. The icons identify the type of interface or port (e.g ., Ethernet) and provide statistical information. Figure 2-2 shows an example of an Interface icon, its Icon Subviews menu, and its labels/double-click z ...

  • Spectrum 2E42_27 - page 27

    Interface Device V iew Interface Icon Device V iews F ast Ethernet SmartSwitch Module 2-4 Management Module Guide Interface Icon Subviews Menu T able 2-1 describes the Interface icon device-specific subviews menu selections . F or information on accessing device-specific subviews menus, see Chapter 1, Introduction . Interface Label This label dis ...

  • Spectrum 2E42_27 - page 28

    9032073 E2 Device V iews 2-5 Interface Device V iew Interface Icon Interface Type Label This label displays the interface type . T able 2-4 lists the possible interface types . T able 2-3. Administrative Status for the Bridging Application Color Status Description Green FWD Bridge port is forwarding . Blue DIS P ort is disabled. Magenta LST Bridge ...

  • Spectrum 2E42_27 - page 29

    Interface Device V iew Interface Icon Device V iews F ast Ethernet SmartSwitch Module 2-6 Management Module Guide MAC Address Label This label displays the MAC address of the device interface . Double-click this label to open the CSI Interface P ort Model Information V iew display described in the Operator ’s Reference . Network Information Label ...

  • Spectrum 2E42_27 - page 30

    9032073 E2 Device V iews 2-7 Interface Device V iew Interface Options P anel Gauge Label This label displays the performance statistic determined by the Gauge Control P anel for this interface. (Refer to the Gauge Control P anel description later in this chapter for more information.) Double-click this label to open the P erformance - CSIIfPort vie ...

  • Spectrum 2E42_27 - page 31

    Interface Device V iew Gauge Control P anel Device V iews F ast Ethernet SmartSwitch Module 2-8 Management Module Guide Figure 2-3. Gauge Control P anel The Gauge Control P anel provides the following: • Gauge Mode area • Selected Attribute area • Gauge Type area • Gauge buttons Gauge Mode This area allows you to select the type of informat ...

  • Spectrum 2E42_27 - page 32

    9032073 E2 Device V iews 2-9 Interface Device V iew Gauge Control P anel Selected Attribute This area allows you to select the statistical attribute displayed on the Interface icon’ s Gauge label. The label changes color to reflect the attribute selected. T able 2-5. T otals Mode: Attributes and Corresponding Color Selected Attribute Color Error ...

  • Spectrum 2E42_27 - page 33

    Interface Device V iew Gauge Control P anel Device V iews F ast Ethernet SmartSwitch Module 2-10 Management Module Guide Gauge Type This area allows you to select either a numeric or linear display on the Gauge label. Gauge Buttons The following describes the Gauge buttons: Applies the current settings to the Gauge label for as long as the view is ...

  • Spectrum 2E42_27 - page 34

    9032073 E2 Device V iews 2-11 Chassis Device V iew Chassis Device View This view uses a Chassis Device icon to provide a logical representation of the device chassis and its interfaces or ports . The Chassis Device icon provides menu and double-click zone access to the views that monitor the interfaces. Figure 2-4 shows an example of the Chassis De ...

  • Spectrum 2E42_27 - page 35

    Chassis Device V iew Chassis Device Icon Device V iews F ast Ethernet SmartSwitch Module 2-12 Management Module Guide Chassis Device Icon This icon is a logical representation of the physical device and its front panel interfaces or ports . This section describes the information a vailable from the Chassis Device icon. Figure 2-5 shows an example o ...

  • Spectrum 2E42_27 - page 36

    9032073 E2 Device V iews 2-13 Chassis Device V iew Chassis Device Icon Device Type Label This label identifies the type of device. (Refer to Figure 2-5.) Double-click this area to open the Device Configuration view described in Chapter 3, Configuration V iews . Device Icon Subviews Menu T able 2-7 lists each of the device-specific Icon Subviews ...

  • Spectrum 2E42_27 - page 37

    Chassis Device V iew Chassis Device Icon Device V iews F ast Ethernet SmartSwitch Module 2-14 Management Module Guide Interface Labels These labels identify the number and activity status of each port. (Refer to Figure 2-5.) T able 2-9 and T able 2-10 list the possible states relative to the application selected. Double-click the label to open the ...

  • Spectrum 2E42_27 - page 38

    9032073 E2 Device V iews 2-15 Chassis Device V iew Chassis Device Icon Interface Icon Subviews Menu This menu’ s Configuration option opens the Configuration dialog box, which allows you to enable or disable the selected port. F or information on accessing device-specific subviews, see Chapter 1, Introduction . FDDI Label This label provides a ...

  • Spectrum 2E42_27 - page 39

    Chassis Device V iew Chassis Device Icon Device V iews F ast Ethernet SmartSwitch Module 2-16 Management Module Guide Logical P orts Labels These labels provide access to the Logical P ort Icon Subviews menu. Double-click a label to open the P ort Configuration View . Logical P orts Icon Subviews Menu T able 2-12 describes each of the Icon Subview ...

  • Spectrum 2E42_27 - page 40

    9032073 E2 Device V iews 2-17 Physical Device V iew Physical Device View This view provides a static image of the device and its ports or interfaces and does not change to reflect configuration status . F igure 2-6 is an example of the Physical Device view for the 8H02-16 device. Figure 2-6. Physical Device V iew *F ile View Help? Landscape of ty ...

  • Spectrum 2E42_27 - page 41

    Physical Device V iew Device V iews F ast Ethernet SmartSwitch Module 2-18 Management Module Guide ...

  • Spectrum 2E42_27 - page 42

    9032073 E2 3-1 Chapter 3 Configuration V iews What Is in This Chapter This chapter describes the Configuration views available for the F ast Ethernet SmartSwitch Modules . These views display network configuration and operating information for the device and its interfaces. The following Configuration views are available for this device: • De ...

  • Spectrum 2E42_27 - page 43

    Device Configuration V iew Configuration V iews F ast Ethernet SmartSwitch Module 3-2 Management Module Guide Device Configuration View This view provides device -specific configuration information as well as access to other views that allow you to configure device components. Device Configuration Information This section of the Configurati ...

  • Spectrum 2E42_27 - page 44

    9032073 E2 Configuration V iews 3-3 Device Configuration V iew Interface Configuration T able Information Interface Configuration T able Information This table within the Device Configuration view provides the following configuration information about the device’ s interfaces or ports. Number of Interfaces Displays the number of interfaces ...

  • Spectrum 2E42_27 - page 45

    Device Configuration V iew Interface Configuration T able Information Configuration V iews F ast Ethernet SmartSwitch Module 3-4 Management Module Guide Phy Address Displays the physical (MAC) address of the interface or port. Max Frame Size Displays the maximum frame size for the interface or port. Oper Status Displays the current operational s ...

  • Spectrum 2E42_27 - page 46

    9032073 E2 Configuration V iews 3-5 P ort Configuration - CSIIfP ort V iew P ort Configuration - CSIIfP ort V iew This view provides information on the configuration and operating status of the device interfaces or ports . T o access the P ort Configuration - CSIIfPort view for a particular interface or port, do the following: 1. Within the In ...

  • Spectrum 2E42_27 - page 47

    FddiMAC Device Configuration V iew Configuration V iews F ast Ethernet SmartSwitch Module 3-6 Management Module Guide FddiMAC Device Configuration View The FddiMAC Device Configuration view provides configuration and operating status information. T o access this view , do the following: 1. Highlight the FddiMAC icon in the Application view (Ic ...

  • Spectrum 2E42_27 - page 48

    9032073 E2 Configuration V iews 3-7 FddiMAC Device Configuration V iew Station Configuration MAC Configuration The actual configuration of the station. T able 3-3 lists the possible configurations and their descriptions . Current MAC P ath The ring that this station resides on. Possible entries are Primary , Secondary , or Local. MAC Address ...

  • Spectrum 2E42_27 - page 49

    P ort Configuration V iew SMT Information Configuration V iews F ast Ethernet SmartSwitch Module 3-8 Management Module Guide SMT Information This section of the FddiMAC Device Configuration view provides the following configuration information on the FDDI SMT : SMT V ersion The version of Station Management (SMT) running. OBS Present Indicates ...

  • Spectrum 2E42_27 - page 50

    9032073 E2 Configuration V iews 3-9 P ort Configuration V iew Link Error Rate Estimate The link error rate estimate is a cumulative long-term average of the bit error rate, which represents the quality of the physical link. The link error rate estimate is computed when the port is connected and every 10 seconds thereafter . It ranges from 10 -4 t ...

  • Spectrum 2E42_27 - page 51

    P ort Configuration V iew Configuration V iews F ast Ethernet SmartSwitch Module 3-10 Management Module Guide ...

  • Spectrum 2E42_27 - page 52

    9032073 E2 4-1 Chapter 4 Event and Alarm Messages What Is in This Chapter This chapter lists the types of events and alarms generated by the F ast Ethernet SmartSwitch Modules and provides any probable cause messages corresponding to these alarms . Device Events and Alarms T able 4-1 lists the SPECTRUM database directory paths (in bold) and the mes ...

  • Spectrum 2E42_27 - page 53

    Device Events and Alarms Event and Alarm Messages F ast Ethernet SmartSwitch Module 4-2 Management Module Guide CsEvF ormat/Event00010308 {d “%w- %d %m-, %Y - %T”} - A(n) {t} device, named {m}, has detected a communication Link Down. (event [{e}]) CsPCause/Prob00010308 Communication link is down. CsEvF ormat/Event00010309 {d “%w- %d %m-, %Y - ...

  • Spectrum 2E42_27 - page 54

    9032073 E2 Event and Alarm Messages 4-3 Device Events and Alarms CsEvF ormat/Event000d01a3 {d “%w- %d %m-, %Y - %T”} - P ort {I 3} on interface {I 1} of {m} ({t}), has unsegmented. (event [{e}]). CsPCause/Prob000d01a3 A device previously linked with this port has been removed, powered down, or the cable segment has a fault. CsEvF ormat/Event000 ...

  • Spectrum 2E42_27 - page 55

    Device Events and Alarms Event and Alarm Messages F ast Ethernet SmartSwitch Module 4-4 Management Module Guide ...

  • Spectrum 2E42_27 - page 56

    9032073 E2 5-1 Chapter 5 Application V iews What Is in This Chapter This chapter describes the device-specific applications listed below for the F ast Ethernet SmartSwitch Modules . The corresponding application model type is shown in parentheses . • Interface Remap (CtIfRemapApp) • F ast Ethernet (F astEnetApp) • FDDI FNB Application (FddiM ...

  • Spectrum 2E42_27 - page 57

    Device Application V iew Application V iews F ast Ethernet SmartSwitch Module 5-2 Management Module Guide The following major application is available if you purchase the associated Cabletron product. The application is described within the documentation supplied with the product. • Standard RMON (RMON App) - Ethernet Probe 1(RMONEthProbe) throug ...

  • Spectrum 2E42_27 - page 58

    9032073 E2 Application V iews 5-3 Device Application V iew Figure 5-1. Device Application View (Icon Mode) *F ile View Help? Landscape of type 2E42_27R Model Name Contact Description Location Network Address Primar y Application System Up Time Manuf acturer Device T ype Serial Number Spanning Tree CT_Stp_App Bridging CSIBridge Static Static_App Tra ...

  • Spectrum 2E42_27 - page 59

    Device Application V iew Application V iews F ast Ethernet SmartSwitch Module 5-4 Management Module Guide Figure 5-2. Device Application View (List Mode) *F ile View Help? Model Name Contact Location Network Address Primar y Application System Up Time Manuf acturer Device T ype Serial Number SS8H CSIBridge CT_Stp_App Static_App CT_Tp_Appl CtIfRemap ...

  • Spectrum 2E42_27 - page 60

    9032073 E2 Application V iews 5-5 Interface Remap Application Interface Remap Application The name of the model type used to model the application is CtIfRemapApp. The application provides the ability to map one or more interfaces to another interface. A map is defined by creating a row in the Interface Remap T able (described below) to specify th ...

  • Spectrum 2E42_27 - page 61

    Interface Remap Application Application V iews F ast Ethernet SmartSwitch Module 5-6 Management Module Guide This button opens the P ort Redirect view , where you can add or delete an entry from the table. Figure 5-3. Interface Remap T able P ort Redirect *F ile View Help? Landscape of type 2E42_27R Name Contact Description Location Network Address ...

  • Spectrum 2E42_27 - page 62

    9032073 E2 Application V iews 5-7 F ast Ethernet Application F ast Ethernet Application The name of the model type used to model the application is F astEnetApp . The application provides the F ast Ethernet P ort T able and F ast Ethernet Configuration view , which allow you to configure ports for Ethernet or F ast Ethernet transmission or use Au ...

  • Spectrum 2E42_27 - page 63

    F ast Ethernet Application F ast Ethernet Configuration V iew Application V iews F ast Ethernet SmartSwitch Module 5-8 Management Module Guide Figure 5-4. F ast Ethernet Configuration View Operational Mode These selections indicate the current operational mode of this port. If you select Auto-Negotiation, you can select as many modes as needed fr ...

  • Spectrum 2E42_27 - page 64

    9032073 E2 Application V iews 5-9 F ast Ethernet Application F ast Ethernet Configuration V iew Advertised Ability These selections indicate the advertised ability of the local hardware . They become active on ports that have Auto-Negotiation enabled. Auto-Negotiation allows the FE-100TX RJ-45 port to self-configure to 10 or 100 Mbps depending on ...

  • Spectrum 2E42_27 - page 65

    F ast Ethernet Application F ast Ethernet Configuration V iew Application V iews F ast Ethernet SmartSwitch Module 5-10 Management Module Guide Received T echnology These selections indicate the advertised ability of the remote hardware or link partner . These modes are read-only . T able 5-3 lists the Received T echnology modes, their values , an ...

  • Spectrum 2E42_27 - page 66

    9032073 E2 Application V iews 5-11 FDDI FNB Application FDDI FNB Application This section describes the FDDI FNB application supported by this device. The name of the model type used to model the application is FddiMAC . This application is available when the appropriate High Speed Interface Module (HSIM) is installed. T able 5-4 lists the applicat ...

  • Spectrum 2E42_27 - page 67

    FDDI FNB Application FDDI Station List V iew Application V iews F ast Ethernet SmartSwitch Module 5-12 Management Module Guide This button has three possible states: Sort Up, Sort Down, and Unsort. Sort Up organizes the list within a selected column from the lowest alphanumeric value to the highest. Sort Down organizes the list within a selected co ...

  • Spectrum 2E42_27 - page 68

    9032073 E2 Application V iews 5-13 A TM Client Application A TM Client Application This section describes the ATM Client application supported by this device. This application is available when the appropriate High Speed Interface Module (HSIM) is installed. T able 5-6 lists the application-specific subviews available from the Icon Subviews menu f ...

  • Spectrum 2E42_27 - page 69

    A TM Client Application A TM Client Application VCL V iew Application V iews F ast Ethernet SmartSwitch Module 5-14 Management Module Guide TTD (Transmit Traffic Description) Index The value of this object identifies the row of the ATM Traffic Descriptor T able that applies to the transmit direction of this VCL. AAL (A TM Adaptation Layer) Type ...

  • Spectrum 2E42_27 - page 70

    9032073 E2 Application V iews 5-15 A TM Client Application A TM Client Application VCL V iew T o make a change to the rows in the table view , do the following: 1. In the Communication Information panel of the V irtual Link view , c hange the Community Name field to “private. ” 2. From the Icon Subviews menu, select T able View . 3. Set the pa ...

  • Spectrum 2E42_27 - page 71

    A TM Client Application A TM Client Application VCL V iew Application V iews F ast Ethernet SmartSwitch Module 5-16 Management Module Guide VPI (Virtual P ath Identifier) This field displays the VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the Interface MaxVPI Bits . VCI (Virtual Channel Identifier) This fiel ...

  • Spectrum 2E42_27 - page 72

    9032073 E2 Application V iews 5-17 Download Application V iew Cross Connect Id This object is implemented only for a VCL that is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of this object, and all their cross-connections are identified by entries in the Cross Connect T able for which VCL ...

  • Spectrum 2E42_27 - page 73

    Download Application V iew Application V iews F ast Ethernet SmartSwitch Module 5-18 Management Module Guide ...

  • Spectrum 2E42_27 - page 74

    9032073 E2 1 Index Numerics 2E42-27 1-1 2E42-27R 1-1 2E43-27 1-1 2E43-27R 1-1 8H02-16 1-1 A A_P ort 3-8 Accessing Device-Specific Subviews 1-5 SPECTRUM Views 1-2 , 1-6 Address Canonical 5-12 MAC 2-6 , 3-4 Mac 3-7 Network 2-7 Administrative Status Label 2-4 Alarm Link Error Rate 3-9 Alarm Messages 4-1 Application Label 2-13 Application View 5-1 ATM ...

  • Spectrum 2E42_27 - page 75

    Index F ast Ethernet SmartSwitch Module 2 Management Module Guide Organization ix DownLoad App 5-1 Download Application Accessing 3-2 Button 3-2 View 5-17 E Enable/Disable P ort 2-16 Environmental Device View 2-11 Error Monitor Count Link 3-9 Monitor Reject Count Link 3-9 Rate Alarm Link 3-9 Rate Cutoff Link 3-9 Rate Estimate Link 3-9 Event Message ...

  • Spectrum 2E42_27 - page 76

    9032073 E2 Index 3 K Keep Settings Button 2-10 L Label and Double-Click Zones 2-3 Link Error Monitor Count 3-9 Reject Count 3-9 Link Error Rate Alarm 3-9 Cutoff 3-9 Estimate 3-9 Logical P ort Labels 2-16 M MAC Address 3-7 Configuration 3-7 Count 3-7 MAC Address Label 2-6 Mapping Interfaces 5-5 Mask Network 2-7 Master 3-8 P orts 3-7 , 5-12 MIB-II 5 ...

  • Spectrum 2E42_27 - page 77

    Index F ast Ethernet SmartSwitch Module 4 Management Module Guide S Slave 3-8 SMT Information 3-8 V ersion 3-8 SNMP2_Agent 5-1 Spanning Tree Bridging 5-1 SPECTRUM P ortable Management App 1-8 SPMA Generic SNMP (MIB I II) 1-10 TFTP Download 1-10 Trap T able 1-9 SPMA Applications 1-8 Static Bridging 5-1 Static_App 5-1 Station 5-12 Configuration View ...

Manufacturer Spectrum Category Network Card

Documents that we receive from a manufacturer of a Spectrum 2E42_27 can be divided into several groups. They are, among others:
- Spectrum technical drawings
- 2E42_27 manuals
- Spectrum product data sheets
- information booklets
- or energy labels Spectrum 2E42_27
All of them are important, but the most important information from the point of view of use of the device are in the user manual Spectrum 2E42_27.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Spectrum 2E42_27, service manual, brief instructions and user manuals Spectrum 2E42_27. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Spectrum 2E42_27.

Similar manuals

A complete manual for the device Spectrum 2E42_27, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Spectrum 2E42_27 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Spectrum 2E42_27.

A complete Spectrum manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Spectrum 2E42_27 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Spectrum 2E42_27, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Spectrum 2E42_27, that we can find in the current document
3. Tips how to use the basic functions of the device Spectrum 2E42_27 - which should help us in our first steps of using Spectrum 2E42_27
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Spectrum 2E42_27
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Spectrum 2E42_27 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Spectrum 2E42_27?

Use the form below

If you did not solve your problem by using a manual Spectrum 2E42_27, ask a question using the form below. If a user had a similar problem with Spectrum 2E42_27 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)